IWATCH(1)

NAME
iwatch - realtime filesystem monitoring program using inotify

SYNOPSIS
iwatch [-d] [-f <config file>] [-v] [-p <pid file>]
iwatch [-c command] [-C charset] [-e event[,event[,..]]] [-h|--help] [-m <email address>]
       [-r] [-s <on|off>] [-t <filter string>] [-v] [--version] [-x exception]
       [-X <regex string as exception>] <target>

DESCRIPTION
inotify (inode notify) is a Linux kernel subsystem that monitors events in filesystems and reports those events to applications in real time.

inotify can be used to monitor individual files or directories. When a directory is monitored, inotify will return events for the directory itself, and for files inside this directory. The inotify support was added to Linux Kernel 2.6.13.

iWatch is a Perl wrap to inotify to monitor changes in specific directories or files, sending alarm to the system administrator in real time. It can:

    •   Send notifications via email about changes.

    •   Take programmable actions immediately, as emit alerts via XMPP messages, WhatsApp or execute a local program or script.

    •   Act as HIDS (Host-based Intrusion Detection System) or an integrity checker, complementing the local firewall systems.

iWatch can run as daemon, as well a simple command. The daemon mode uses a XML configuration file, and put a list of directories and files (targets) to monitor. The command line mode will run without a configuration file. You just need to put the necessary information (target to watch, email, exception, recursivity, events to monitor and command to execute) in the command line. The options for both modes cannot be mixed together.

In the XML configuration file, each target can have its own email contact point. This contact point will get an email notification for any changes in the monitored targets. You can monitor a directory recursively, and you can also setup a list of exceptions where you do not want to monitor directory/file inside a monitored directory. It is also possible to disable email notification, and instead setup a command to be executed if an event occurs. Per default iWatch only monitor following events: close_write, create, delete, move, delete_self and move_self. But you can specify any possible events, like access, attrib, modify or all_events. See the EVENTS section for more details.

OPTIONS
Usage for daemon mode (background) of iWatch:

    -d  Execute the application as daemon. iWatch will run in foregroud without this option.

    -f <config_file.xml>
        Specify alternative configuration file. Default is /etc/iwatch/iwatch.xml.

    -p <pid_file>
        Specify an alternate pid file. Default: /var/run/iwatch.pid.

    -v  Be verbose.

Usage for command line mode (foreground) of iWatch:

    -c <command>
        You can specify a command to be executed if an event occurs. For details about the available strings, take a look at STRINGS FOR COMMAND section.

    -C <charset>
        Specify the charset (default is utf-8).

    -e <event[,event[,..]]>
        Specify a list of events that you want to watch. For details about possible events, take a look at EVENTS section.

    -h, --help
        Print help message.

    -m <email_address>
        Contact point's email address. Without this option, iWatch will not send any email notification.

    -r  Recursivity when watching a directory.

    -s on|off
        Enable or disable reports to the syslog (default is off/disabled).

    -t <filter>
        Specify a filter string (regex) to compare with the filename or directory name. It will report events only if the file/directory name matches the filter string. It is useful if you want watch a file like /etc/passwd or /etc/shadow. Instead watching this single file, just watch the /etc directory with filter="passwd|shadow", because if you watch only the passwd/shadow file, the watcher will be deleted after one change of this file and you will not get another notification. This is caused by the application that changes passwd or shadow (e.g. passwd or chfn), they do not change the files directly, but create a new file and move it to passwd or shadow file. So, this command will remove the inode and therefore the watcher.

    -v  Verbose mode. This option will show the main current action.

    --version
        Print the version number.

    -x <exception file or directory>
        Specify the file or directory which should not be watched.

    -X <regex string as exception>
        Similar to -x but specifying a regex string as exception.

STRINGS FOR COMMAND
When using the '-c <command>' option, these strings will be available:

%c  Event cookie number.

%e  Event name.

%f  Full path of the filename that gets an event.

%F  The old filename in case moved_to event.

%p  Program name (iWatch).

%v  Version number.

EVENTS
Following are the possible events you can use with the '-e' option:

access
    file was accessed.

attrib
    file attributes changed.

close
    file closed, regardless of read/write mode.

close_nowrite
    file closed, after being opened in read-only mode.

close_write
    file closed, after being opened in writeable mode.

create
    a file was created within watched directory.

delete
    a file was deleted within watched directory.

delete_self
    the watched file was deleted.

ignored
    file was ignored.

isdir
    event occurred against dir.

modify
    file was modified.

move
    a file/dir within watched directory was moved.

moved_from
    file was moved away from.

moved_to
    file was moved to.

oneshot
    only send event once.

open
    file was opened.

q_overflow
    event queued overflowed.

unmount
    file system on which watched file exists was unmounted.

default
    close_write, create, delete, move, delete_self and move_self.

all_events
    all events.

COMMAND LINE USAGE EXAMPLES

$ iwatch /tmp
    Monitor changes in /tmp directory with default events.

$ iwatch -r -e access,create -m root@example.com -x /etc/mail /etc
    Monitor only access and create events in /etc directory, recursively, with /etc/mail as exception, and send email notification to root@example.com.

$ iwatch -r -c (w;ps -ef)|mail -s '%f was changed' root@localhost /bin
    Monitor /bin directory, recursively, and execute the commands 'w' and 'ps -ef', sending the results to root@localhost, using '<path_filename> was changed' as subject. To see about '%f' take a look at STRINGS FOR COMMAND section.

$ iwatch -r -X '.svn' ~/projects
    Monitor ~/projects directory, recursively, but exclude any .svn directories inside. This cannot be done with a normal '-x' option since '-x' can only exclude the defined path.

CONFIGURATION FILE EXAMPLE
The default configuration file is /etc/iwatch/iwatch.xml. See an example:

    <?xml version="1.0" ?>
    <!DOCTYPE config SYSTEM "/etc/iwatch/iwatch.dtd" >
    <config>
     <guard email="root@example.com" name="iWatch"/>
     <watchlist>
     <title>WEB server integrity monitoring</title>
     <contactpoint email="someone@example.com" name="Administrator"/>
        <path type="recursive" syslog="on" alert="off" exec="echo %p: %e %f | /usr/bin/sendxmpp -t foo@jabber-br.org">/var/www</path>
        <path type="exception">/var/www/counter</path>
     </watchlist>
    </config>
The two first lines will define the XML version and the file that defines the pattern used by iWatch (the default is /etc/iwatch/iwatch.dtd). These lines needn't be changed.

The <config> statement is used to mark the configuration start point. The last line of the configuration must be </config>. The 'guard email' line is used to specify the sender email and name to be used when sending notifications by email. In other words, this line defines the 'From:' email field. The <watchlist></watchlist> delimits a block of definitions about a watch or some watches procedures.

The <config></config> place can have several <watchlist></watchlist> blocks. Inside these blocks (<watchlist></watchlist>), the <title></title> space is used to add a title that will identify the purpose of the block. The 'contactpoint' line contains the destination email address (To:) and name when sending notifications by email.

Each <path></path> line can monitor a file/directory and execute actions. The first path line showed will monitor recursively the directory /var/www. As no events was defined, iWatch will employ the default event (close_write, create, delete, move, delete_self and move_self events). If an event occurs, the syslog will register it and a message reporting the program name (%p = iWatch), the event (%e) and the monitored file/directory name (%f) will be sent via XMPP protocol (sendxmpp external program) to foo@jabber-br.org. Note that alert="off" will disable any sending email. Another important point is that a second line is excluding the /var/www/counter file/directory from observation.

The showed example uses the sendxmpp command. Other good possibility is to apply the yowsup-cli command to send WhatsApp messages.

A new example. With configuration showed below, iWatch will work over three <watchlist> blocks.

    <?xml version="1.0" ?>
    <!DOCTYPE config SYSTEM "iwatch.dtd">
    <config>
     <guard email="admin@localhost" name="iWatch"></guard>
     <watchlist>
     <title>Public Website</title>
     <contactpoint email="webmaster@example.com" name="WebMaster"/>
        <path type="single">/var/www/localhost/htdocs</path>
        <path type="single" syslog="on">/var/www/localhost/htdocs/About</path>
        <path type="recursive">/var/www/localhost/htdocs/Photos</path>
     </watchlist>
     <watchlist>
     <title>Operating System</title>
     <contactpoint email="admin@localhost" name="Administrator"/>
        <path type="recursive">/etc/apache2</path>
        <path type="single">/etc/passwd</path>
        <path type="recursive">/etc/mail</path>
        <path type="exception">/etc/mail/statistics</path>
        <path type="single" filter="shadow|passwd">/etc</path>
     </watchlist>
     <watchlist>
     <title>Only Test</title>
     <contactpoint email="root@localhost" name="Administrator"/>
         <path type="single" alert="off" exec="(w;ps -ef)|mail -s %f root@localhost">/tmp/dir1</path>
         <path type="single" events="access,close" alert="off" exec="(w;ps -ef)|mail -s %f root@localhost">/tmp/dir2</path>
         <path type="single" events="default,access" alert="off" exec="(w;ps -ef)|mail -s '%f is accessed' root@localhost">/tmp/dir3</path>
         <path type="single" events="all_events" alert="off">/tmp/dir4</path>
     </watchlist>
    </config>
The first <watchlist> block monitors a directories and has special actions for two files but no execute a command in neither of them. The first path is a single (non recursive) directory /var/www/localhost/htdocs and any notification will be sent to the contact point webmaster@example.com. Note that have no events specified. So, the default (close_write, create, delete, move, delete_self and move_self) will be used. The second path is the file /var/www/localhost/htdocs/About. This file is inside the last directory. The difference is that all activities over this file will be logged in /var/log/syslog. The third path will monitor, recursively, the directory /var/www/localhost/htdocs/Photos (also inside of the first directory). No log. Default events will be notified via mail.

The second block has five monitoring. All notification will be sent to admin@localhost. The main novelty over the first block is that a path uses a 'filter' instruction to watch /etc/shadow and /etc/passwd at the same time. To understand better this situation, see the '-t' in OPTIONS section.

The last block monitors a default event in first line and several non default events in the following three lines. In all lines the 'alert' is defined as 'off'. So, iWatch will not send emails using the builtin mail engine. However, in three lines the external command 'mail' was used to send personalized emails.

LEARNING ABOUT EVENTS
A tip to learn about events is watch the iWatch command executing with '-e all_events' option. The following example will monitor a 'ls /tmp' command.

    $ iwatch -e all_events /tmp
    [17/Jun/2014 11:22:59] IN_ISDIR,IN_OPEN /tmp
    [17/Jun/2014 11:22:59] IN_ISDIR,IN_CLOSE_NOWRITE /tmp
Another example, that monitors the creating of a file inside /tmp:

    $ iwatch -e all_events /tmp
    [17/Jun/2014 11:29:43] IN_MODIFY /tmp/file.txt
    [17/Jun/2014 11:29:43] IN_OPEN /tmp/file.txt
    [17/Jun/2014 11:29:43] IN_MODIFY /tmp/file.txt
    [17/Jun/2014 11:29:43] IN_CLOSE_WRITE /tmp/file.txt
    [17/Jun/2014 11:29:43] * /tmp/file.txt is closed
So, in the last example occurred modify, open and close_write actions.

RULES VALIDATION
Since version 0.2.0 iWatch checks the validity of XML file if it has following entry in the first two lines:

    <?xml version="1.0" ?>
    <!DOCTYPE config SYSTEM "iwatch.dtd">
The check will be made over a pattern described by /etc/iwatch/iwatch.dtd file. Without the showed two lines, iWatch will just give a warning that you have to use DTD file, and it continues to run as normal without XML validation. The iWatch's XML format is very simple and easy to understand, and it uses following DTD :

    <!ELEMENT config (guard,watchlist+)>
    <!ATTLIST config
       charset CDATA "utf-8"
    >
    <!ELEMENT guard (#PCDATA)>
    <!ATTLIST guard
       email  CDATA #REQUIRED
       name   CDATA #IMPLIED
    >
    <!ELEMENT watchlist (title,contactpoint,path+)>
    <!ELEMENT title (#PCDATA)>
    <!ELEMENT contactpoint (#PCDATA)>
    <!ATTLIST contactpoint
       email  CDATA #REQUIRED
       name   CDATA #IMPLIED
    >
    <!ELEMENT path (#PCDATA)>
    <!ATTLIST path
       type   CDATA          #REQUIRED
       alert  (on|off) "off"
       events CDATA          #IMPLIED
       exec   CDATA          #IMPLIED
       filter CDATA          #IMPLIED
       syslog (on|off) "off"

SEE ALSO
sendxmpp(1), yowsup-cli(1)

AUTHOR
iWatch was written by Cahya Wirawan <cahya@gmx.at>.

This manual page was written by Michael Prokop <mika@debian.org> and updated/improved by Joao Eriberto Mota Filho <eriberto@debian.org> for the Debian project (but may be used by others).