
                 How to install the HylaFAQ-distribution
                    (release: 07:34:58 AM 01/27/97)
                       matthias.apitz@softcon.de


This is a living list of frequently asked questions about the HylaFAX
fax software system. The point of this document is to circulate existing
information, and to avoid rehashing old answers.  Better to build on top
than start again.  Please read this document before ever posting to
the HylaFAX mailing list (see Q12 how to subscribe to the list).

The HylaFAX FAQ is located at:

	ftp://ftp.sgi.com/sgi/fax/doc/hylafaq.tar.gz

in a easy-to-install form (see below).  The FAQ are hyper-linked
HTML pages ready to use for your favored browser.
Alternatively, a PostScript copy of a snapshot of this FAQ is also
available by public ftp in the directory
	
	ftp://ftp.sgi.com/sgi/fax/doc/hylafaq.ps.gz

The FAQ comes also with a small search engine. To enable this
feature you must copy over the perl script ./search.pl to
the cgi-bin directory of your HTTP server. See step 4) below.

The HylaFAX software and this FAQ were created by Sam Leffler
(sam@sgi.com). Since Nov. 1995 the FAQ is maintained by me, 
Matthias Apitz.

Your comments, additions and fixes to this document are welcome:
please send them to flexfaq@softcon.de by electronic mail.
You can also give feedback on specific questions through links
provided on each individual page.

Here is how to install - have fun.

1)	gnu-unzip and un-tar the archive;
	this will create a directory "./HylaFAQ" and the whole FAQ
	below this dir:

	$ gzcat faq.tar.gz | tar xvf -

2)	links to the HylaFAX man-pages or other online html-files
	are done from the FAQ by HREF's to the pattern:

		@HTMLPATH@/...	and
		@CGIPATH@/...

	there is a small shell-script (HylaFAQ/patch.sh) to change
	the patterns to reflect the location on your system, or to
	point to the HylaFAX-home page at www.vix.com; please modify
	this script, e.g. set:

          ROOT=${1-http://www.your-host.your-domain/hylafax/}
        CGIBIN=${2-http://www.your-host.your-domain/hylafax-cgi-bin/}

	or:

          ROOT=${1-http://www.vix.com/hylafax/}
        CGIBIN=${2-http://www.vix.com/cgi-bin/}

	and run

	$ cd HylaFAQ ; sh patch.sh

	The script patch.sh does also change the perl script
	HylaFAQ/search.pl to set the full qualified location
	of the HylaFAQ into the search script. If you later
	move your HylaFAQ to some other place you've to
	change this perl script by hand (you can't re-run the
	script patch.sh).

3)	to read the FAQ you don't need any httpd on your system;
	just start reading the HylaFAQ and fire up your favored
	browser (e.g.):

	$ cd HylaFAQ ; Mosaic index.html

	you may also want to collect all pages into one HTML-document
	for printing or converting to PostScript;

	$ cd HylaFAQ ; sh collect.sh > collect.html
	$ Mosaic collect.html

4)	If you want to enable the search tool of the FAQ you've to
	copy the script HylaFAQ/search.pl to the cgi-bin directory
	of your HTTP-server, e.g.:

	# cp HylaFAQ/search.pl /usr/local/httpd/cgi-bin/search.pl

Please report problems, bugs and new answers to me.

Canges relative to last HylaFAQ of 03:18:54 PM 05/18/96 are:


updated: Q1   What is HylaFAX?
updated: Q4   What machines does HylaFAX run on?
updated: Q5   What is the current version/status of HylaFAX?
    new: Q6   What are the differences between v4.0pl0 and v4.0pl1
updated: Q7   Where can I get a binary/source distribution of HylaFAX?
updated: Q8   What documentation exist for HylaFAX?
updated: Q9   What other related software is available?
updated: Q11  What version of HylaFAX do I have?
updated: Q12  How should I report bugs?
    new: Q14  Volunteers to do binary distributions wanted!
    new: Q15  How is HylaFAX actually maintained?
    new: Q16  Where are the HylaFAX mailing list archives now?
    new: Q17  HylaFAX Mailing List Archive is back
    new: Q18  FAQ: Modem AT+Fxxx commands?
    new: Q19  Can I run HylaFax on my NT 4.0 Server?
    new: Q20  T.30 T2 timeout errors - where I can get more info on?
    new: Q25  Building HylaFAX with LD_RUN_PATH
    new: Q26  Re: calling last chance on bug fixes ?
    new: Q27  adding the g++ include path?
    new: Q28  Howto send fixes?
    new: Q29  I seem to be missing file "new.h"?
    new: Q30  Build error on Solaris 2.5 with -pedantic-errors ?
    new: Q31  Compiling Hylafax v4.0beta018 under Sun Solaris with DSO ?
    new: Q32  Problems with socket.h on AIX, ...?
    new: Q33  Why CGI_BIN didn't get properly replaced?
    new: Q34  Looking for /bin/test file?
updated: Q35  How do I view received facsimile?
updated: Q36  How do I create a fax cover page template?
    new: Q39  sendfax option -D not working?
updated: Q43  Faxing TIFF G4 images?
    new: Q45  Howto set Email notification when done?
    new: Q46  Was is the idea behind SNPP?
    new: Q47  Re: faxmail from hylafax Beta 18 ?
    new: Q48  Re: Question concerning faxcover and the "-f"
    new: Q49  Howto send HTML files?
    new: Q50  Problems with killtime of the job?
    new: Q51  Simple Mail-to-fax gateway?
    new: Q52  v4.0beta015 and fax broadcasting ?
    new: Q53  Is there a table describing the one character codes used by faxstat?
    new: Q54  Sending a few lines without cover page?
    new: Q55  Howto use WinFlex ?
    new: Q56  Can I run the old WinFlex with HylaFAX v4.x?
    new: Q57  Winhfax client - format of phone book?
    new: Q58  Problem connecting with MAc Client?
    new: Q59  Connecting-Problem with whfc under Windows NT 4.0?
    new: Q60  Sendpage and Mail?
    new: Q61  Where to find mailfax.sh for sendmail?
    new: Q62  Howto Numeric-only paging?
    new: Q63  Where to set default notifying level for sendfax?
    new: Q64  Service not available, remote server closed connection?
updated: Q65  How do I use modems connected to a Telebit NetBlazer?
updated: Q66  Do I have to restart a server after changing the modem config file?
    new: Q84  Should I use Class1 modems?
    new: Q85  Howto Forward Incoming Faxes using E-mail?
    new: Q86  NoCarrierRetrys, MaxDials or MaxTries variables...
    new: Q87  How to config ModemClass?
    new: Q88  No regular expression for modem class?
    new: Q89  Re: Logging in HylaFAX v4.0beta18 ?
    new: Q90  RFC for Sam's funky new c/s protocol?
    new: Q91  Is T.30 Sub-Addressing support in HylaFAX?
    new: Q92  UnixWare 4.2 general permission scheme & HylaFAX v4.x
    new: Q93  Experience from using HylaFAX regarding sending 1000 per day?
    new: Q94  Is there a way to re-init the modem after some time?
    new: Q95  MultiTech ZDX2834 modems?
    new: Q96  USRobotics Courier modem and class2.0 standard
    new: Q97  Howto set 7-E-1 instead of N-8-1 for paging?
    new: Q98  Sending Very Large Files gives  Job time limit exceeded?
    new: Q99  Howto deinstalling HylaFAX
    new: Q100 Re: BUG when device has name 'xxx_yy' ?
    new: Q101 Re: Distinctive Ring Support ?
    new: Q102 Re: Faxing from a PC?
    new: Q103 Re: Files in /var/spool/fax/docq ?
    new: Q104 Problem accessing fax services by clients?
    new: Q105 How to set passwd for remote users ?
    new: Q106 Installing the v4 pl0 Binary dist under Linux Slackware 3.0?
    new: Q107 Where is the file pagermap?
    new: Q108 Howto set pagerMaxMsgLength?
    new: Q109 HylaFAX and Short Message Service in Germany?
    new: Q110 Howto restrict outbound usage in v4.0?
    new: Q111 Howto re-use failed jobs from the docq?
    new: Q112 Howto setting up the syslog daemon?
    new: Q113 Howto distinguish which files have been received on which devices
    new: Q114 UUCP locking in Solaris x86, ...
    new: Q115 AT+FAP=? gives ERROR?
    new: Q116 Fonts for HylaFAX?
    new: Q117 Howto prevent modem data connection for security?
    new: Q118 FIFO Permission problem with faxanswer?
    new: Q119 Start faxserver if reboot?
    new: Q120 I can't remove a job?
    new: Q121 modem state for other programs?
    new: Q122 Where to get "egetty" for FAXSETUP?
    new: Q123 The truth about egetty/vgetty
    new: Q124 Anyone done a faxback system?
    new: Q125 faxgetty and ringback?
    new: Q126 Waiting for modem to come available?
updated: Q128 Dirk's fax mail gateway package
updated: Q129 TCL/Tk GUI front-end to FlexFAX/HylaFAX
    new: Q130 Macintosh client for HylaFAX
    new: Q131 Announce: (Mac users: lw360f)
updated: Q132 Windows 3.1 client for FlexFAX/HylaFAX
    new: Q133 HylaFAX client for Win95?
updated: Q146 Troubleshooting
    new: Q152 Courier V.everything - 2DMR encoding
    new: Q153 Problems with FAA=1 ?
    new: Q154 I couldn't find it anywhere howto specify the FAXSERVER
    new: Q155 Problems with HylaFAX and incomming data call
    new: Q156 Problem with BOCA MV.34E modems AT+FCLASS=?
    new: Q157 I've  problems with data inbound calls
    new: Q158 I've access problems for files in the spooling area
    new: Q159 Unable to set RT scheduling parameters ...
    new: Q160 ReTrainNegative Problem with some FAX-machines
    new: Q161 I have a problem with TSI in HylaFax
    new: Q162 Winflex does not put COMMENTs on my cover page?
    new: Q163 Problems sending PS from WinFlex in Win95 ?
    new: Q164 Bad EOP response to blank page ?
    new: Q165 Communication between WinFlex and HylaFAX
    new: Q166 chown(2) problems in HylaFAX on SCO, HP-UX, ...
    new: Q167 I got code50 during send operation?
    new: Q168 Waiting for modem to come ready?
    new: Q169 Do I _have_ to install BSD printf?
    new: Q170 document conversion script was not found?
    new: Q171 Faxgetty dies with signal 15?
    new: Q172 faxgetty is spawning too rapidly?
    new: Q173 Access problems in the spooling area?
    new: Q174 Why are my tiff files corrupted?
    new: Q175 Problems after Un-taring a binary distributions?
    new: Q176 Bad exit status 0400 for "bin/faxrcvd ..."
    new: Q177 Problems with TAP service provider?
    new: Q178 [Linux:] can't load library 'libg++.so.27'
    new: Q179 Waiting for modem to come ready?
    new: Q180 Can I still run HylaFax without mawk?
    new: Q181 Linux: hfaxd children dying with signal 11?
    new: Q182 Rockwell chipset (Zoom modems)
    new: Q183 Re: Fax to FAx through Internet ?
    new: Q184 PPP autodetection in faxgetty ?
    new: Q185 Serial Port Scanner for Unix??
