From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com
Subject: Problems with HPUX 10.10 & Zyxel 1946E/V 6.10 P
Date: Tue, 01 Apr 1997 08:38:04 +0200
From: STefan Mayer -- SYSTOR AG <mayer.stefan@ch.swissbank.com>
Sender: owner-flexfax@celestial.com

Hello,

I installed Hylafax v4.0pl1 on a HP UX machine (compiled with gcc). As Modem I 
use a Zyxel 1946E/V Rev. 6.10 P.

When sending faxes I always get "black" pages at the destination. everything 
else seems to work fine. Probably the Firmware Revision is too old (6.10P). 
Anyone encountered the same Problem? Any sugegstions?

greetings from Switzerland,

	STefan Mayer

-- 
S Y S T O R   A G		Chief Technology Office / Research
Stefan Mayer
Dipl. Informatik-Ing. ETH	INET: stefan.mayer@systor.com
Aeschenvorstadt 56		Tel.: ++41 (0)61/228 53 80
4002 Basel			Fax.: ++41 (0)61/228 51 26


From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 1 Apr 1997 14:21:57 +0200 (MET DST)
From: Alex Ongena <Alex.Ongena@able.be>
Reply-To: Alex Ongena <Alex.Ongena@able.be>
To: Hylafax list <flexfax@sgi.com>
Subject: Unix FAX Software ?
Organization: Able NV
Sender: owner-flexfax@celestial.com

Hi,

I'am using Hylafax already for a long time and find it marvelous, how-
ever I have a customer who wants a UNIX FAX system with a very complete
Windows-95 frontend. The current state of 'whfc' is not acceptable
to him because there is no intergrated feature to handle incomming fax-es,
sorting outgoing fax, to quickly see when he has faxed what, ....

He his willing to buy a commercialy supported system, however, up
until today I have not found one that works under Linux.

VSI-Fax seems nice, but they do not support Linux and the SCO version
(COFF) does not work with the Linux iBCS emulation.

Does somebody know a commercial UNI-Fax solution with Win-95 front end ?

or, even much better, a 'commercial' Win-95 front-end for Hylafax ;-)

Many thanks in advance
Alex Ongena
--
+---------------------------------------------------------------------+
|  Alex Ongena            Able NV/SA      tel:    +32 (0)16 53.64.80  |
|  Networking Consultancy & Services      fax:    +32 (0)16 53.64.88  |
|  Villadreef 9                           GSM:          095 54.64.80  |
|  B-3128 Tremelo - Belgium               mailto:Alex.Ongena@able.be  |
+---------------------------------------------------------------------+

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com
Subject: whfc
Date: Tue, 01 Apr 1997 18:12:24 +0200
From: STefan Mayer -- SYSTOR AG <mayer.stefan@ch.swissbank.com>
Sender: owner-flexfax@celestial.com


Hello,

I just installed whfc on my workstation and tried to print to a HP UX 
Fax-server running hylafax 4.0pl1. If I try to look at the fax queue or send a 
fax I always get a error message saying:

": command error, expecting command token

I can't get rid of the error nor the window. I have to use the task manager to 
shut the whfc down.

Any Idea what I did wrong??

regards,

	STefan Mayer

- -- 
S Y S T O R   A G		Chief Technology Office / Research
Stefan Mayer
Dipl. Informatik-Ing. ETH	INET: stefan.mayer@systor.com
Aeschenvorstadt 56		Tel.: ++41 (0)61/228 53 80
4002 Basel			Fax.: ++41 (0)61/228 51 26



------- End of Forwarded Message

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Leslie Mikesell <les@Mcs.Net>
Subject: Re: Unix FAX Software ?
To: Alex.Ongena@able.be
Date: Tue, 1 Apr 1997 11:01:53 -0600 (CST)
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

> I'am using Hylafax already for a long time and find it marvelous, how-
> ever I have a customer who wants a UNIX FAX system with a very complete
> Windows-95 frontend. The current state of 'whfc' is not acceptable
> to him because there is no intergrated feature to handle incomming fax-es,
> sorting outgoing fax, to quickly see when he has faxed what, ....
> 
> He his willing to buy a commercialy supported system, however, up
> until today I have not found one that works under Linux.
> 
> VSI-Fax seems nice, but they do not support Linux and the SCO version
> (COFF) does not work with the Linux iBCS emulation.
> 
> Does somebody know a commercial UNI-Fax solution with Win-95 front end ?
> 
> or, even much better, a 'commercial' Win-95 front-end for Hylafax ;-)

Have you looked at the WANG image add-in that you can ftp from 
Microsoft?  It understands the received tiff  files (even to the point
of being able to show a thumbnail view of multipage documents) so
an appropriate disk link to the server via samba might be all you need. 
A few conventions for logging/storing outbound faxes and  rolling
the inbound sequence numbers over (perhaps date-stamped directories)
might make it easier and the price is right...

Les Mikesell
  les@mcs.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 01 Apr 1997 10:28:17 -0800
From: James Cardwell <cardwell@sfu.ca>
Reply-To: cardwell@sfu.ca
To: flexfax@sgi.com
Subject: Opening Tiff files on Win95(ie dos) machines
Sender: owner-flexfax@celestial.com

I'm attempting to set up a fax server for a small lan of 25 machines. My
server is a linux box running kernel 2.00 (Slackware). The client
machines are all Win95 machines which I am going to use Flexfax as the
client program. I've intalled hylafax, upgraded to ghostscipt 4.03, and
have everything working, except for the following problem:

Problem:  Opening hylafax tiff files on the client machines: When
sending received faxes to a Win95 client - (as tiff files), the dos tiff
viewers return the error "Invalid Huffman Code" when trying to open the
tiff. The "viewfax" program on the linux box is able to open and view
the same file - so I know the file if not corrupted. Are the tiff files
created by the hylafax/tiff progams compatable with the dos tiff format?
Alternatively, is there a windows viewer for viewing hylafax faxes? Am I
completely on the wrong track?

I realize that one alternative is to convert the tiff files back to
postscript - however, I would like to avoid doing that.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 09:30:41 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Hylafax Mailing list <flexfax@sgi.com>
Subject: WHFC 9.3a and Win95
Sender: owner-flexfax@celestial.com

For some time now, I've been trying to get WHFC to work, without any
success. What would happen is that I'd print a Word document to the
FaxPrinter, whfc would then pop up and ask for a destination; and at
that point it freezes.

I'd hoped that the latest version 0.3a would solve the program freeze;
no luck. Has anyone around here experienced the same problem - and
solved it?
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 1 Apr 1997 13:37:47 -0800
To: flexfax@sgi.com
From: John Ratcliffe <jratcliffe@soemail.ucsd.edu>
Subject: Help with Solaris Hylafax setup
Sender: owner-flexfax@celestial.com

Is there a patch for hardware flow control on Solaris 2.4 on a Sparc5
using /dev/cua/b ?
I searched all over at SUN and could not find a patch to fix this.

I could not get the Modem to respond until I set flow control
to xonxoff but know I get receive errors in phase C everytime.
I have tried different baud rates 38400, 19200 and 9600.

Solaris package installed hylafax-sparc-sunos5.5-v4.0pl1-pkg
Solaris 2.4 on Sparc 5 using /dev/cua/b
Modem MuliTech MT2834ZDX/0314C

Thanks John Ratcliffe UCSD SOE.

------ recieve fax log file ----------
Apr 01 12:41:57.74: [ 6476]: SESSION BEGIN 00000004 16195340408
Apr 01 12:41:57.75: [ 6476]: <-- [4:ATA\r]
Apr 01 12:42:05.73: [ 6476]: --> [5:+FCON]
Apr 01 12:42:05.74: [ 6476]: ANSWER: FAX CONNECTION
Apr 01 12:42:05.76: [ 6476]: RECV FAX: begin
Apr 01 12:42:12.87: [ 6476]: --> [28:+FTSI:"        619 534 3087"]
Apr 01 12:42:12.88: [ 6476]: REMOTE TSI "619 534 3087"
Apr 01 12:42:12.88: [ 6476]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Apr 01 12:42:12.88: [ 6476]: REMOTE wants 9600 bit/s
Apr 01 12:42:12.88: [ 6476]: REMOTE wants page width 1728 pixels in 215 mm
Apr 01 12:42:12.88: [ 6476]: REMOTE wants unlimited page length
Apr 01 12:42:12.89: [ 6476]: REMOTE wants 3.85 line/mm
Apr 01 12:42:12.89: [ 6476]: REMOTE wants 2-D MR
Apr 01 12:42:12.89: [ 6476]: --> [2:OK]
Apr 01 12:42:12.89: [ 6476]: <-- [7:AT+FDR\r]
Apr 01 12:45:12.89: [ 6476]: REMOTE HANGUP: Unspecified Phase C error,
including
 too much delay between TCF and +FDR command (code 90)
Apr 01 12:45:12.89: [ 6476]: RECV FAX (00000004): recvq/fax00004.tif from
619 53
4 3087, route to <unspecified>, 0 pages in 3:07
Apr 01 12:45:13.03: [ 6476]: RECV FAX: Unspecified Phase C error, including too
much delay between TCF and +FDR command
Apr 01 12:45:13.07: [ 6476]: <-- [6:AT+FK\r]
Apr 01 12:45:14.63: [ 6476]: --> [7:+FHNG:2]
Apr 01 12:45:14.63: [ 6476]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (co
de 2)
Apr 01 12:45:15.28: [ 6476]: --> [2:OK]
Apr 01 12:45:15.35: [ 6476]: RECV FAX (00000004): session with 619 534 3087
term
inated abnormally: Unspecified Phase C error, including too much delay
between T
CF and +FDR command
Apr 01 12:45:15.35: [ 6476]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif" "cua_b"
"00000004" "Unspecified Phase C error, including too much delay between TCF and
+FDR command"
Apr 01 12:45:18.22: [ 6476]: RECV FAX: end
Apr 01 12:45:18.22: [ 6476]: SESSION END

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Rex Fowler <rmfowler@raptor.mtc.ti.com>
Subject: Re: sendpage hangs
To: Matthias.Apitz@SOFTCON.de
Date: Tue, 1 Apr 1997 15:47:05 -0600 (CST)
Cc: flexfax@sgi.com
Reply-To: rmfowler@mtc.ti.com
Sender: owner-flexfax@celestial.com


Does anyone have 4.0pl1 running on Solaris 2.4?  If so,
may I please see your output of 'showrev -p' ?  

I still believe this is a problem with how the FIFO's are
being used.  I've tried compiling with the solaris fifo
and select bugs defined and without.  I'm not sure they're doing
the right thing.

syslog is configured correctly,
server tracing is configured with 0x0400f
sendpage fails every time due to a timeout.
pagesend works if I run it manually on a failed sendpage job
nothing gets logged to syslog except 3 startup messages
nothing gets logged under /log until I run pagesend manually.

I'm not running faxgetty since I'm just trying to get alpha paging
working at the moment.  Does it need to be running for send only
mode?

faxq and hfaxd are the only two processes running.

I've trussed and trussed these things and cannot figure out the problem.

What process is supposed to read() from /FIFO.cua_b ?  
When faxq open()s  /FIFO.cua_b with O_WRONLY|O_NDELAY, errno 6=ENXIO
which corresponds to what the open() manpage says...
 ie
When opening a FIFO with O_RDONLY or  O_WRONLY set:
                       If O_NDELAY or O_NONBLOCK is set:  An open
                       for   reading-only   will  return  without
                       delay;  an  open  for  writing-only   will
                       return  an  error  if no process currently
                       has the file open for reading.


sendpage talks to hfaxd fine.  I can watch the protocol chat with the
-v option to sendpage but the message is never delivered.  I can
then run pagesend manually to have it sent ok.

If you have experience compiling/installing v4.0pl1 on solaris 2.4,
please let me know if you have ran into this same problem.  It looks so
much like a derivation of the known FIFO bug that I'm wondering if
maybe one of my patches has changed the behavior of what flexfax is
expecting.

Thanks,

> Rex Fowler wrote:
>     
>     If I enable server tracing (specifically to watch the FIFO
>     communication, will it show up in syslog or under the log/ 
>     directory?
>     
>     I have 
>     
>     ServerTracing: 0x04000
>     
>     And only see the following 3 lines in /usr/adm/messages
>     
>     Mar 26 17:49:18 raptor HylaFAX[1461]: HylaFAX INET Protocol Server: restarted.
>     Mar 26 17:49:18 raptor HylaFAX[1461]: HylaFAX Old Protocol Server: restarted.
>     Mar 26 17:49:18 raptor HylaFAX[1461]: HylaFAX SNPP Protocol Server: restarted.
>     
>     Nothing shows up in session logs under the /log directory
> 
> The server tracing is done through the syslogd(1M) daemon.
> You have to specify the facility and the bits in
> 
> lib/hfaxd.conf          for hfaxd(1M)
> spool/etc/config        for faxq(1M)
> spool/etc/config.devID  for faxgetty(1M), pagesend(1M), faxsend(1M)
> 
> For all facilities and priorities you must also configure your
> syslogd(1M) in the file syslog.conf(4F).
> 
> 	matthias


-- 
Rex Fowler              http://www.mtc.ti.com/~rmfowler
(972)997-2779           mailto:rmfowler@mtc.ti.com
Alpha Pager             http://www.mtc.ti.com/cgi-bin/alpha_pager.cgi
TI MSG                  rfow

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Rex Fowler <rmfowler@raptor.mtc.ti.com>
Subject: Re: sendpage hanging - solved
To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
Date: Tue, 1 Apr 1997 18:09:27 -0600 (CST)
Cc: flexfax@sgi.com
Reply-To: rmfowler@mtc.ti.com
Sender: owner-flexfax@celestial.com

It appears that I do need faxgetty running in a send only
environment.    This should be ok since I'll want receive capabilities
eventually.

Thanks,

-- 
Rex Fowler              http://www.mtc.ti.com/~rmfowler
(972)997-2779           mailto:rmfowler@mtc.ti.com
Alpha Pager             http://www.mtc.ti.com/cgi-bin/alpha_pager.cgi
TI MSG                  rfow

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 02:51:33 +0200 (MET DST)
From: Richard Kail <richard@kailkiste.at>
Reply-To: e8903122@student.tuwien.ac.at
To: Alex Ongena <Alex.Ongena@able.be>
Cc: Hylafax list <flexfax@sgi.com>
Subject: Re: Unix FAX Software ?
Sender: owner-flexfax@celestial.com

Hello !

On Tue, 1 Apr 1997, Alex Ongena wrote:

> or, even much better, a 'commercial' Win-95 front-end for Hylafax ;-)

	Hm. I have the same problem... Some months ago I thought about 
implementing a 'commercial grade' Hylafax Client for Windows 3.1, NT & 
95. (Win 3.1 should be optional...) My main problem with this thing is to 
find a easy and clean way to hook between a ps printer driver and the 
windows spooler system. The print file solution used with Winflex and WHFC 
isn't what I wanted (althought WHFC is a great step forward - thanks to the author)

	I tried to reverse engeneer a old Winfax version, but they are 
implementing there own printer driver - not a good solution for a highly 
modular system like Hylafax on Unix. I found also a Postscript Printer 
Driver from MS in Source (on a Developer Network CD), but thats a very 
old piece software - I don't want to start work with something 
praehistoric. Implementing a own dump printer driver and wrapping the whole 
pixel bunch in a postscript file isn't my way ;-))

	If someone with some more windows programming experience out there 
has a good idea how to handle this problem I would be very happy to 
hear...

Kind regards,
	Richard

------
We can use symlinks of course... syslogd would be a symlink to syslogp and
ftpd and ircd would be linked to ftpp and ircp... and of course the
point-to-point protocal paenguin.
(Kevin M. Bealer, commenting on the penguin Linux logo.)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: "Pranshu K. Gupta" <pkg@nol.net>
Subject: Hylafax 4.0 for Linux
To: flexfax@sgi.com
Date: Tue, 1 Apr 1997 20:28:57 -0600 (CST)
Cc: pkg@nol.net (Pranshu K. Gupta)
Sender: owner-flexfax@celestial.com


Hi,

I seem to have screwed up something on my HylaFax setup to disable it.
I had it working just fine until today.  Well, the last thing that I
used it (or tried to use it) was for receiving a fax.  I was unable to
receive the fax and then gave up.  Then today, I tried to send a fax
and it wouldn't do that either (it used to send faxes just fine but
I had never tried to receive any).  Here's some of the diagnostics
that might help you isolate the problem:

% tail /var/spool/fax/etc/syslog
Apr  1 20:22:13 gupta inetd[289]: execv /usr/etc/faxd.recv: No such file or dire

% faxstat -v
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
Service not available, remote server closed connection


I used to have to run the "faxsetup" script before I could use the
"sfax" script.  Doing so doesn't help any more.  I get the following
after running sfax:

Service not available, remote server closed connection

Sendfax failed, fax was not sent
A copy of your fax template has been saved in /root/dead.fax


Can somebody please help?  I'd be more than happy to email any
and all other diagnostics that you might require.

Thanks.

-Pranshu
pkg@nol.net
281-423-5631 (O)
281-872-5193 (H)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 15:16:21 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Hylafax Mailing list <flexfax@sgi.com>
cc: duke@heloc.com
Subject: Re: WHFC 0.3a and Win95
Sender: owner-flexfax@celestial.com

On Wed, 2 Apr 1997, Jonathan Chen wrote:

> For some time now, I've been trying to get WHFC to work, without any
> success. What would happen is that I'd print a Word document to the
> FaxPrinter, whfc would then pop up and ask for a destination; and at
> that point it freezes.
> 
> I'd hoped that the latest version 0.3a would solve the program freeze;
> no luck. Has anyone around here experienced the same problem - and
> solved it?

Hah. After playing around with it some more, the problem appears to be
that you *must* specify a file for `Faxcover'. I've put the one from
the HylaFAX distribution in (although *that* doesn't work), and left
the `Use Faxcover' box unchecked. It appears to work now..

It may be nice to find a working faxcover file...
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Steve Williams <steve@genie96.com>
Subject: Re: WHFC 9.3a and Win95
To: jonc@pinnacle.co.nz (Jonathan Chen)
Date: Tue, 1 Apr 1997 20:58:23 -0700 (MST)
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

> 
> For some time now, I've been trying to get WHFC to work, without any
> success. What would happen is that I'd print a Word document to the
> FaxPrinter, whfc would then pop up and ask for a destination; and at
> that point it freezes.
> 
> I'd hoped that the latest version 0.3a would solve the program freeze;
> no luck. Has anyone around here experienced the same problem - and
> solved it?

Yes, I have experienced exactly the same problem.  I had a workaround
that seemed to work for several days, then I tried it again, & it didn't,
though I only tried it once today.

For some reason, whfc does not appear to remove the spool file that is 
created on the hard disk.  It appears to make a copy of it with a 
sequence number in the filename.  You can do a dir after the whfc
window pops up & see both the spool file created by the Windoze driver,
and the copy of it.

After the fax is sent, the copy is gone, but the spool file created by the
Windoze driver still exists.

My workaround was to delete the Windoze spool file after each transmission
via whfc.  I don't use whfc that much, & I was sending out the same fax
to 8 different clients, so my workaround worked 8 times.  Without removing
the spool file, I could't even send it once, it would hang.

The other thing that I was doing was waiting about 10 seconds AFTER the 
whfc window pops up.  I had a feeling that that had an effect as well.

I know, it is a great little package, but if it doesn't work reliably, 
then it is no good to anyone in our company but me, as they don't have
the knowlege to mess around with things & get them working.

Hope this helps,

-- 
	Steve Williams, Calgary, Alberta, Canada
	Genie Computer Systems Inc.
	steve@genie96.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: sendpage hanging - solved
To: rmfowler@mtc.ti.com
Date: Wed, 2 Apr 1997 08:00:05 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Rex Fowler wrote:
    
    It appears that I do need faxgetty running in a send only
    environment.    This should be ok since I'll want receive capabilities
    eventually.

It should (must) be working without faxgetty(1M) too and
it would be nice if someone could debug this.

	matthias
-- 
firm: matthias.apitz@sisis.de [voc:+49-89-61308-351, fax: +49-89-61308-188]
priv: guru@thias.muc.de
 PGP: Key fingerprint = 0C 01 F2 23 EC 17 A2 D5  46 2D 29 4C 0E 8B 7E 8F

http://www.softcon.de/~guru/Bill-in-the-hell.html  -- Joke about Bill Gates.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Hylafax 4.0 for Linux
To: pkg@nol.net (Pranshu K. Gupta)
Date: Wed, 2 Apr 1997 08:19:31 +0200 (MSZ)
Cc: flexfax@sgi.com, pkg@nol.net
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Pranshu K. Gupta wrote:
    
    
    Hi,
    
    I seem to have screwed up something on my HylaFax setup to disable it.
    I had it working just fine until today.  Well, the last thing that I
    used it (or tried to use it) was for receiving a fax.  I was unable to
    receive the fax and then gave up.  Then today, I tried to send a fax
    and it wouldn't do that either (it used to send faxes just fine but
    I had never tried to receive any).  Here's some of the diagnostics
    that might help you isolate the problem:
    
    % tail /var/spool/fax/etc/syslog
    Apr  1 20:22:13 gupta inetd[289]: execv /usr/etc/faxd.recv: No such file or dire
    
    % faxstat -v
    Trying localhost (127.0.0.1) at port 4559...
    Connected to localhost.
    Service not available, remote server closed connection
    
    
    I used to have to run the "faxsetup" script before I could use the
    "sfax" script.  Doing so doesn't help any more.  I get the following
    after running sfax:
    
    Service not available, remote server closed connection
    
    Sendfax failed, fax was not sent
    A copy of your fax template has been saved in /root/dead.fax
    
    
    Can somebody please help?  I'd be more than happy to email any
    and all other diagnostics that you might require.

You've mixed some versions or at least terms of two
different versions. "faxd.recv" belongs to the old
HylaFAX/FlexFAX version while "faxsetup" belongs to
HylaFAX v4.x and also the port 4559 is the standard
port of v4.x version. You have to clean up your system
(e.g. remove all old version 3.x parts) and install or
configure HylaFAX v4.0pl1 from scratch.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Steve Williams <steve@genie96.com>
Subject: Re: WHFC 0.3a and Win95
To: jonc@pinnacle.co.nz (Jonathan Chen)
Date: Tue, 1 Apr 1997 23:46:09 -0700 (MST)
Cc: flexfax@sgi.com, duke@heloc.com
Sender: owner-flexfax@celestial.com

> 
> On Wed, 2 Apr 1997, Jonathan Chen wrote:
> 
> > For some time now, I've been trying to get WHFC to work, without any
> > success. What would happen is that I'd print a Word document to the
> > FaxPrinter, whfc would then pop up and ask for a destination; and at
> > that point it freezes.
> > 
> > I'd hoped that the latest version 0.3a would solve the program freeze;
> > no luck. Has anyone around here experienced the same problem - and
> > solved it?
> 
> Hah. After playing around with it some more, the problem appears to be
> that you *must* specify a file for `Faxcover'. I've put the one from
> the HylaFAX distribution in (although *that* doesn't work), and left
> the `Use Faxcover' box unchecked. It appears to work now..
> 
> It may be nice to find a working faxcover file...

It's pretty easy to make the faxcover that you are using on the Unix box
work under Whfc.  The problem ( for me ) was that the faxcover program on 
the Unix box generates a routine called "BreakIntoLines".  The faxcover 
program with Whfc DOES NOT generate this routine.  So, just take one of 
the faxes that have been sent with a cover page ( or run the unix
comand "faxcover") , cut out the routine & put it at the top of your
postscript faxcover page.  Well, not at the top, but somewhere near
the top.  If you need a hand, drop me a line.

/BreakIntoLines
{ /proc exch def
  /linewidth exch def
  /textstring exch def
  /breakwidth wordbreak stringwidth pop def
  /curwidth 0 def
...

-- 
	Steve Williams, Calgary, Alberta, Canada
	Genie Computer Systems Inc.
	steve@genie96.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 02 Apr 1997 08:18:37 +0100
From: Lotfi Azaiez <lotfi.azaiez@rz.fh-nuernberg.de>
To: flexfax@sgi.com
Subject: HylaFax !
Sender: owner-flexfax@celestial.com

Hallo,
Beim Aufruf von (faxq)faxsetup erscheint das folgende im 
messages-file :
 
1)Cannot open file for reading
2)Parse error in dial string rules "/etc/dialrules.europe
3)No regular expression for modem class
4)Could not create FIFO: Permission denied.
 
zu 3)im file /var/spool/fax/etc/config existiert 
ein Eintrag : ModemClass 2
 
zu 4) im Verzeichnis /var/spool/fax/ existiert ein file : FIFO.ttyS0
 
prw-------   1 uucp     wheel           0 Apr  1 17:56 FIFO.ttyS0
 
HxlaFax v4.0pl1 Linux 2.0 !
Fuer ein paar Tips waere ich dankbar !

Lotfi

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Uri Shkolnik <uri@harmonic.co.il>
To: "flexfax@sgi.com" <flexfax@sgi.com>,
        "'STefan Mayer -- SYSTOR AG'"
	 <mayer.stefan@ch.swissbank.com>
Subject: RE: whfc
Date: Wed, 2 Apr 1997 11:16:00 +0300
Sender: owner-flexfax@celestial.com

On Tuesday, April 01, 1997 7:12 PM, STefan Mayer -- SYSTOR AG[SMTP:mayer.stefan@ch.swissbank.com] wrote:
>
>Hello,
>
>I just installed whfc on my workstation and tried to print to a HP UX 
>Fax-server running hylafax 4.0pl1. If I try to look at the fax queue or send a 
>fax I always get a error message saying:
>
>": command error, expecting command token
>
>I can't get rid of the error nor the window. I have to use the task manager to 
>shut the whfc down.
>
>Any Idea what I did wrong??
>
>regards,
>
>	STefan Mayer
>
>- -- 
>S Y S T O R   A G		Chief Technology Office / Research
>Stefan Mayer
>Dipl. Informatik-Ing. ETH	INET: stefan.mayer@systor.com
>Aeschenvorstadt 56		Tel.: ++41 (0)61/228 53 80
>4002 Basel			Fax.: ++41 (0)61/228 51 26
>
>
>
>------- End of Forwarded Message
>
>
>
>
>

I had the same problems, tried to get help from this mailing list and from the author, but nothing. I'm still using the old winflex.
I'll glad if you find the answer to this problem and forward it to me.

Regards, 
Uri Shkolnik - System Administrator
Harmonic Lightwaves (Israel)
Email: uri@harmonic.co.il
Tel: (972) 6 6230150 (Ext 122)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Uri Shkolnik <uri@harmonic.co.il>
To: "flexfax@sgi.com" <flexfax@sgi.com>
Subject: RE: Opening Tiff files on Win95(ie dos) machines
Date: Wed, 2 Apr 1997 11:37:37 +0300
Sender: owner-flexfax@celestial.com

On Tuesday, April 01, 1997 9:28 PM, James Cardwell[SMTP:cardwell@sfu.ca] wrote:
>I'm attempting to set up a fax server for a small lan of 25 machines. My
>server is a linux box running kernel 2.00 (Slackware). The client
>machines are all Win95 machines which I am going to use Flexfax as the
>client program. I've intalled hylafax, upgraded to ghostscipt 4.03, and
>have everything working, except for the following problem:
>
>Problem:  Opening hylafax tiff files on the client machines: When
>sending received faxes to a Win95 client - (as tiff files), the dos tiff
>viewers return the error "Invalid Huffman Code" when trying to open the
>tiff. The "viewfax" program on the linux box is able to open and view
>the same file - so I know the file if not corrupted. Are the tiff files
>created by the hylafax/tiff progams compatable with the dos tiff format?
>Alternatively, is there a windows viewer for viewing hylafax faxes? Am I
>completely on the wrong track?
>
>I realize that one alternative is to convert the tiff files back to
>postscript - however, I would like to avoid doing that.
>
>

1) Tiff solution - You must change the TIFF parameters for Win95/NT client viewers, it's something like - (for faxrecv batch file)

########################################
# Making tmp uuencode base 64 tif file #
########################################
 
# $TIFFCP -c none  -f msb2lsb $FILE $TIF1
# $TIFFCONV -s "x" -o $TIF2 $TIF1
 
# X=`wc -l $TIF2 | awk '{print $1}'`
# X=`expr $X - 1`
# $AWK '{if (NR > 14 && NR < X) print $0}' X=$X $TIF2 > $TIF3
 
# Deleting the tmp tif files at the end
# of the script

2) I realy thing that a postscript solution is much better. (send the a postscript file to the user and install a Win95/NT postscript utility )
(and again a part from the script file)
Notify()
{
    echo "To: $*"
    echo "From: The HylaFAX Receive Agent <fax>"
    echo 'Subject: Fax from "'$SENDER'"'
    echo "";
    $INFO $FILE
    cat<<EOF
TimeToRecv: $TIME minutes
SignalRate: $RATE
DataFormat: $FORMAT
Sender: $SENDER
EOF
 
 
 
    if [ "$MSG" ]; then
        echo ""
        echo "The full document was not received because:"
        echo ""
        echo "    $MSG"
    fi
}
 
     MIMEBOUNDARY="NextPart$$"
(
     echo "Mime-Version: 1.0"
     echo 'Content-Type: Multipart/Mixed; Boundary="'$MIMEBOUNDARY'"'
     echo "--$MIMEBOUNDARY"
     echo "Content-Type: TEXT/PLAIN; charset=US-ASCII"
     Notify FaxMaster
     echo ""
     echo "--$MIMEBOUNDARY"
     echo 'Content-Type: application/postscript; name="fax.ps"'
     echo "Content-Transfer-Encoding: 7bit"
     echo "Content-Description: FAX document"
     echo ""
     $FAX2PS $FILE 2>/dev/null
     echo ""
     echo "--$MIMEBOUNDARY--"
)


Hope this help you

Regards,

Uri Shkolnik - System Administrator
Harmonic Lightwaves (Israel)
Email: uri@harmonic.co.il
Tel: (972) 6 6230150 (Ext 122)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 02 Apr 1997 10:51:03 +0200
To: cardwell@sfu.ca
From: Staff Intelcom <staff@intelcom.sm>
Subject: Re: Opening Tiff files on Win95(ie dos) machines
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

At 10.28 01/04/97 -0800, you wrote:
>I'm attempting to set up a fax server for a small lan of 25 machines. My
>server is a linux box running kernel 2.00 (Slackware). The client
>machines are all Win95 machines which I am going to use Flexfax as the
>client program. I've intalled hylafax, upgraded to ghostscipt 4.03, and
>have everything working, except for the following problem:
>
>Problem:  Opening hylafax tiff files on the client machines: When
>sending received faxes to a Win95 client - (as tiff files), the dos tiff
>viewers return the error "Invalid Huffman Code" when trying to open the
>tiff. The "viewfax" program on the linux box is able to open and view
>the same file - so I know the file if not corrupted. Are the tiff files
>created by the hylafax/tiff progams compatable with the dos tiff format?
>Alternatively, is there a windows viewer for viewing hylafax faxes? Am I
>completely on the wrong track?

Hi,

try http://www.mis2.udel.edu/~terence/tiffview/

Regards,

Andrea Gabellini

>
>I realize that one alternative is to convert the tiff files back to
>postscript - however, I would like to avoid doing that.
>


+-----------------------------+-----------------------------------------+
| Staff Omniway               | E-mail : staff@intelcom.sm              |
| Intelcom S.p.A.             | Tel.     0549 886111 (Italy)            |
| Strada degli Angariari, 3   | Fax      0549 908654 (Italy)            |
| 47031 Rovereta              | Tel.     +378 886111 (international)    |
| Republic of San Marino      | Fax      +378 908654 (international)    |
+-----------------------------+-----------------------------------------+

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: tony@umcc.umcc.umich.edu (Tony Poole)
Subject: Re: WHFC 0.3a and Win95
To: flexfax@sgi.com
Date: Wed, 2 Apr 1997 07:37:10 -0500 (EST)
Sender: owner-flexfax@celestial.com

On Wed, 2 Apr 1997, Jonathan Chen wrote:

>> For some time now, I've been trying to get WHFC to work, without any
>> success. What would happen is that I'd print a Word document to the
>> FaxPrinter, whfc would then pop up and ask for a destination; and at
>> that point it freezes.
>> 
>> I'd hoped that the latest version 0.3a would solve the program freeze;
>> no luck. Has anyone around here experienced the same problem - and
>> solved it?
>
>Hah. After playing around with it some more, the problem appears to be
>that you *must* specify a file for `Faxcover'. I've put the one from
>the HylaFAX distribution in (although *that* doesn't work), and left
>the `Use Faxcover' box unchecked. It appears to work now..
>It may be nice to find a working faxcover file...

This didn't solve my lockup problem.  Are you sure you didn't change
something else along the way?

I have the identical problem, and I know my faxcover file works fine (I've
used it for well over a year).  I tried unchecking "Use Faxcover" to see if
I could stop the lockup, but it didn't work for me.  (btw, the cover
template from the hylafax distribution works for me as well)

I did get it to not lockup one time by deleting the winhfax.ini file and
retyping in the user settings.  The second time I tried to fax it locked up
though.

Tony


------------------------------------------------------------------------------
Tony Poole  Traverse City, MI USA  tony@umcc.umich.edu  tony@cherry1.trv.mi.us

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 2 Apr 97 10:06:21 EST
To: flexfax@sgi.com
Subject: Re: Hylafax 4.0 for Linux
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Pranshu, you need to start checking things. If faxstat is not working,
then nothing else is going to work right. Use "ps" to see if you have
hfaxd and faxq running, and/or check inetd.conf for the hfaxd entry if
you are using that technique. If they are not running, you *do* need
to run faxsetup and/or the "hylafax" script used to start those two
daemons.

Also, when presenting problems like this, please tell us what version
of Linux, HylaFAX, what modem, and other details of your system. For
example, I'm not sure why the inetd is complaining about
"faxd.recv". I don't remember that as being part of the v4.0 HylaFAX:
could you have an old entry in /etc/inetd.conf for the older flexfax
version of the software?

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu




-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM0J16D/+ItycgIJRAQFBswQAoFZ5fUS8h7SiV73iEXRnyY96S673Ld//
bvvEVYwNbEMz+dqtXojYVOcPEA6XpXzcjFDHqd5Dfc51prz56ijiNiO9+6lvOXYe
B/0eDs6EMgk5P+QiPxNyoEsbkJzGmdjOrgX0pkg6wcDqI9bZGPamSJobph3w+VN/
zNGayP3Am58=
=NAFq
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 2 Apr 97 10:13:09 EST
To: flexfax@sgi.com
Subject: Re: Opening Tiff files on Win95(ie dos) machines
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


James, the "tiff" format of the HylaFAX files is the fax standard,
"tiffg3", a multi-page format.  HylaFAX used to use the extension
".fax" for those, but at some point it changed to ".tif". Sam Leffler,
who I believe *created* TIFF, also wrote HylaFAX, so in general I'd go
with Sam's usage. But yeah, the PC's, web browsers, and other things
that use 3-letter extensions are going to have problems with it
until/unless the standard for TIFF viewers includes tiffg3.

Fortunately, the TIFF package that Sam created includes "fax2tiff", and
that can be used to translate them to a more standard "tiff" format.

Matthias? Sam? Would it make sense to alter HylaFAX to use a ".fax"
extension again, or ".tg3" or something to distinguish it from
standard TIFF?

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM0J3fz/+ItycgIJRAQE3LQP/ZNqoqydFPts0wjbIyVdIzNpRQ4KztDQf
EFOe154xA/2BwS+mY+3noEQ8JquS4t7RoqMLxkPyCS2xcC9LNe/mlC2MgFDRsvrd
0MQ0ozwQwI2TKOSZ3KK7m8VGUr26MUrbDx7f1vyUmY7eUhE194hz+FAbpMhQB7+S
IS9UhWWf3/U=
=uK50
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 02 Apr 1997 16:23:14 +0100
To: HylaFAX List <flexfax@sgi.com>
From: Phil Watkinson <pkw@elgro.co.uk>
Subject: Re: whfc
Cc: Stefan Mayer <mayer.stefan@ch.swissbank.com>
Sender: owner-flexfax@celestial.com

At 18:12 01/04/97 +0200, Stefan Mayer wrote:
>
>Hello,
>
>I just installed whfc on my workstation and tried to print to a HP UX 
>Fax-server running hylafax 4.0pl1. If I try to look at the fax queue or send a 
>fax I always get a error message saying:
>
>": command error, expecting command token
>
>[snip]

Hi. 

I've never seen this error with whfc, so I'm guessing. 

First of all, when you say 'workstation' you do mean a PC running Windows'95
or NT ? Second, could you open a DOS window and type the following :

        c:\windows> telnet derrick 4559

but instead of 'derrick' put your own server hostname. You should see :

220 derrick.elgro.co.uk server (HylaFAX (tm) Version 4.0pl1) ready.

which shows that the hfaxd server program is running. Type 'quit' to end
the session. If you don't see the above, refer to 'Troubleshooting.html' 
from the html docs ( which is where the above test came from ).

Well, it's a start. Let us know how you got on.

Cheers,
Phil Watkinson,
Boston, UK.







                                                                               

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 17:57:10 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: flexfax@sgi.com
Subject: Q: V4.0pl1, handling of modem-groups
Sender: owner-flexfax@celestial.com

Hi there,

...i recently installed V4.0pl1 from source on our linux machine.
After reading the docs/manpages etc, i still have some questions
concerning how faxq shedules between modem or modem-groups and how to
address them in the sendfax command.

-> when configuring more than one modem into the same "ModemClass":

     -> will "faxq" try to use all modems in that Class, when a
        Modems' tty is specified with the -h parameter in "sendfax"?

-> if more than one ModemClass is specified for all available modems:

     -> will "faxq" ONLY select modems out of the same class as of the
        modem-tty specified with "sendfax -h" ???
     -> how to tell "faxq" what modem-class to use if NO tty is given
        upon "sendfax"?
     
-> goal: dedicating more than one modem out of the pool exclusively to a
         certain fax-originator in our environment...
         -> this assures that telecomm.-costs for a certain tty are
            related to a certain user-group only.


TIA,
   Fred

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 18:08:52 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: flexfax@sgi.com
Subject: Q: V4.0pl1, specify alternate destination for delivery? 
Sender: owner-flexfax@celestial.com

Hi,

...in the case that the desired, receiving loaction has more than one
fax-machine/modem, each with a specific fax-number:

 -> is it possible to specify these alternate fax-numbers upon send, so
    that faxq will try to deliver the fax only ONCE to the location, but
    with all destination faxnumbers as resource?

goal: reduce the risk of non-successful deliveries, if the receiving
      location has more than one fax-machine...speedup 4 delivery is
      quite possible as well.

TIA,
  Fred

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Leslie Mikesell <les@Mcs.Net>
Subject: Re: Unix FAX Software ?
To: arnolds@ifns.de
Date: Wed, 2 Apr 1997 10:38:22 -0600 (CST)
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

> > Have you looked at the WANG image add-in that you can ftp from 
> > Microsoft?  It understands the received tiff  files (even to the point
> > of being able to show a thumbnail view of multipage documents) so
> > an appropriate disk link to the server via samba might be all you need. 
> > A few conventions for logging/storing outbound faxes and  rolling
> > the inbound sequence numbers over (perhaps date-stamped directories)
> > might make it easier and the price is right...
> > 
> Can you please tell me the location of the WANG software?
> 

You can find it with a search for 'imaging' at http://www.microsoft.com
but the page seems to be: http://www.microsoft.com/windows/software/img_us.htm
at least for now.  There is also a white paper describing the full-blown
Wang image management program.  Since it understands the fax tiffs it
might be a good fit for someone willing to spend money, but the free
download is a nice start.

Les Mikesell
  les@mcs.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Leslie Mikesell <les@Mcs.Net>
Subject: Re: Opening Tiff files on Win95(ie dos) machines
To: cardwell@sfu.ca
Date: Wed, 2 Apr 1997 10:55:34 -0600 (CST)
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

> I'm attempting to set up a fax server for a small lan of 25 machines. My
> server is a linux box running kernel 2.00 (Slackware). The client
> machines are all Win95 machines which I am going to use Flexfax as the
> client program. I've intalled hylafax, upgraded to ghostscipt 4.03, and
> have everything working, except for the following problem:
> 
> Problem:  Opening hylafax tiff files on the client machines: When
> sending received faxes to a Win95 client - (as tiff files), the dos tiff
> viewers return the error "Invalid Huffman Code" when trying to open the
> tiff. The "viewfax" program on the linux box is able to open and view
> the same file - so I know the file if not corrupted. Are the tiff files
> created by the hylafax/tiff progams compatable with the dos tiff format?
> Alternatively, is there a windows viewer for viewing hylafax faxes? Am I
> completely on the wrong track?

'Tiff' is a generic term and not all tiff programs are aware of all
the possible tags and encodings.

> I realize that one alternative is to convert the tiff files back to
> postscript - however, I would like to avoid doing that.

You can use 'tiffcp' on the linux side to change the encoding to
something your existing programs understand or (since you are all
Win95) you can download the Wang inaging program available from
http://www.microsoft.com/windows/software/img_us.htm
that will register itself as your tiff program and seems to understand
the class-F format directly.

Les Mikesell
  les@mcs.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 2 Apr 97 13:19:23 EST
To: flexfax@sgi.com
Subject: Problems with Linux, Win95, USR modem solved
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Got it! I had installed various PnP tools for Linux to access the
modem, but couldn't connect to the serial lines. It turned out that in
the process of adding/removing jumpers, adding/removing drivers,
etc. under Win95, the !@#$ Plug n' Pray had disabled the serial lines
in the BIOS. I was able to connect to the modem with Linux at one
point days ago and had not directly touched the BIOS, so it was
clearly the Win95 re-configuration that had messed with it.  A Linux
hacker over my shoulder suggested altering the settings there,
whereupon I discovered the problem and fixed it.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM0KjJj/+ItycgIJRAQHAxwP/QLVNLEUYtuqyuT9XErd+xKqa7OtrITgP
8Utv/Op5eRXNjrYki5+clsJbqwpMdQfCArPJE3pHrni1wsQcCChoPlNYEIPEXhVY
akwvGgtE2tEcB3GA273ujJS/2f8fOheahbebAzVOxOSxgmZv9zZxG906sqZ6iQoE
/Rf2qW3kQpw=
=trJm
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 14:32:10 -0500 (EST)
From: High Mercury <merc@icanect.net>
To: Alex Ongena <Alex.Ongena@able.be>
cc: Hylafax list <flexfax@sgi.com>
Subject: Re: Unix FAX Software ?
Sender: owner-flexfax@celestial.com

> I'am using Hylafax already for a long time and find it marvelous, how-
> ever I have a customer who wants a UNIX FAX system with a very complete
> Windows-95 frontend. The current state of 'whfc' is not acceptable
> to him because there is no intergrated feature to handle incomming fax-es,
> sorting outgoing fax, to quickly see when he has faxed what, ....
> 
> He his willing to buy a commercialy supported system, however, up
> until today I have not found one that works under Linux.
> 
> VSI-Fax seems nice, but they do not support Linux and the SCO version
> (COFF) does not work with the Linux iBCS emulation.
> 
> Does somebody know a commercial UNI-Fax solution with Win-95 front end ?
> 
> or, even much better, a 'commercial' Win-95 front-end for Hylafax ;-)

have you tried looking at faximum??? check out
http://www.faximum.com

their product seems to have some nice features...but have never tried it...

has anyone tried that product and have any comments about it????

merc

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: hal-j@NetUSA.Net (Hal J Schechner)
Subject: pagesend replacement?
To: flexfax@sgi.com
Date: Wed, 2 Apr 1997 14:49:31 -0500 (EST)
Sender: owner-flexfax@celestial.com

Greetings,

    I just browsed through the mailing list archives, looking for a
replacement for pagesend, that will work with non IXO/TAP pager 
systems.  Pretty much what I need is to be able to send something
like phone-number,,,,,,,,message and be done with it.  I would be
willing to assume that if the line was not busy, that the page was
sent.  There was one thread I saw, that dealt with this, and the 
suggestion was made to write a pagesend replacement.  If this has been
done by anyone, are they willing to share code?  If not, I'll write
one.  Would anyone be interested?

-Hal Schechner
-- 
-=(fun: hal-j@wtp.com)=-=-=[Hal Schechner]=-=-=-=(work: hal-j@NetUSA.Net)=-
            If all else fails, immortality can always be assured            
               by spectacular error.  -John Kenneth Galbraith               
-=[http://rattlehead.wtp.com]-=-SysAdmin=-=[http://www.NetUSA.Net/~hal-j]=-

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: philc@lusas.com
Date: Wed, 2 Apr 1997 22:01:37 +0100
Subject: 2D Encoding for MT1932ZDX & USR Courier
To: flexfax@sgi.com
Cc: philc@brahms.lusas.com
Sender: owner-flexfax@celestial.com



Has anyone managed to send a 2D encoded fax with these modems?

All my attemps so far have failed. Any tips greatfully received.


-----------------------------------------------------------------
Philip Cooper, Consultancy Manager, FEA Ltd 
Forge House,66 High Street,Kingston-upon-Thames,Surrey,KT1 1HN,UK
	Telephone		    Fax		    Internet
+44 181 549 9229 Ext 1224   +44 181 546 0751   philc@lusas.com  
-----------------------------------------------------------------

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 09:04:00 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Tony Poole <tony@umcc.umcc.umich.edu>
cc: flexfax@sgi.com
Subject: Re: WHFC 0.3a and Win95
Sender: owner-flexfax@celestial.com

On Wed, 2 Apr 1997, Tony Poole wrote:

> On Wed, 2 Apr 1997, Jonathan Chen wrote:
>
> >Hah. After playing around with it some more, the problem appears to be
> >that you *must* specify a file for `Faxcover'. I've put the one from
> >the HylaFAX distribution in (although *that* doesn't work), and left
> >the `Use Faxcover' box unchecked. It appears to work now..
> >It may be nice to find a working faxcover file...
>
> This didn't solve my lockup problem.  Are you sure you didn't change
> something else along the way?

Ok. This is what I *had* to do to get our version to work:

    1. make sure Faxcover points an existing file.
    2. make sure the public phonebook points to existing non-empty
       phonebook - just create one default entry.
    3. Filled out *everything* on the system and user setup.

1. & 2. solved our freezeups. 3. solved some communication problems
with our HylaFAX server.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: hal-j@NetUSA.Net (Hal J Schechner)
cc: flexfax@sgi.com
Subject: Re: pagesend replacement? 
Date: Wed, 02 Apr 1997 16:34:23 -0500
From: Eric S Johnson <esj@cs.fiu.edu>
Sender: owner-flexfax@celestial.com


Here is a script I use with hylafax to do a digital page.
Its not perfect, as it will only try a digital page for 3 minutes 
before giving up. Also I had to adjust the , time on my modem
(S8? I forget) 

I use the "page" id string to prevent any fax errors from being sent.
Instead faxmaster gets a note via the diff below for notify.awk.

Seems kludgy, but in practice works great.

E

----

digipage

#!/bin/sh
#
# send a digital page
#
#
# test args and print error message if needed
#
if [ x$1 = x -o x$2 = x ]
then
        echo "digifax usage:  digipage pagernum returnnum [other sendfax 
options
]"
        echo "pager number is the pager number to dial"
        echo "returnnum is the number to send as return value"
        echo "Other options to sendfax will be passed along"
        echo " "
        exit
fi
to=$1
ret=$2
shift; shift
#
# send the page
#
echo "junk" | sendfax $* -n -N -i page -k "now +3 minute" -d $to,,,,$ret\#


--- Diff for /var/spool/fax/bin/notify.awk

*** notify.awk.dist     Thu Jan  2 09:39:37 1997
--- notify.awk  Thu Jan  2 09:08:02 1997
***************
*** 269,277 ****
        if (why == "killed")
            returnToSender();
      } else if (why == "timedout") {
!       putHeaders(jobtag " to " number " failed");
!       print " could not be completed before the appointed deadline.";
!       returnToSender();
      } else if (why == "format_failed") {
        putHeaders(jobtag " to " number " failed");
        print " was not sent because document conversion"
--- 269,282 ----
        if (why == "killed")
            returnToSender();
      } else if (why == "timedout") {
!         if ( jobtag == "page" ) {
!            printf("From: fax\nTo: faxmaster\nSubject: page sent\n\n");
!            printf("Page to %s sent by %s\n",number,mailaddr);
!         }  else { 
!            putHeaders(jobtag " to " number " failed");
!            print " could not be completed before the appointed deadline.";
!            returnToSender();
!         }
      } else if (why == "format_failed") {
        putHeaders(jobtag " to " number " failed");
        print " was not sent because document conversion"

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 10:48:00 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Lotfi Azaiez <lotfi.azaiez@rz.fh-nuernberg.de>
cc: flexfax@sgi.com
Subject: Re: HylaFax !
Sender: owner-flexfax@celestial.com

On Wed, 2 Apr 1997, Lotfi Azaiez wrote:

Since I can't read German, I'm guessing what the problem is:

[snip]
> 3)No regular expression for modem class
>  
> zu 3)im file /var/spool/fax/etc/config existiert 
> ein Eintrag : ModemClass 2

If you read the manual entry for config(4), you'll see that ModemClass: 
does *not* refer to the modem's fax communication Class, but rather a
selection class. It helps to read *EVERYTHING* before setting up
HylaFAX.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 01:29:27 +0200 (GMT+0200)
From: Uri Shkolnik <uri@harmonic.co.il>
To: flexfax@sgi.com
Subject: Tiffg3, fax2tiff, etc.
Sender: owner-flexfax@celestial.com

Hello,

After some discussions in this mailing list about TIFFG3, and the received 
faxes format, I rechecked and tried few methods. 
I have few Q's - 
1) I download the img_us.exe (Imaging v1.0 by Wang), it's working, but I'm looking for something better. The most missing is export option to other image formats (GIF, JPEG, DXF, PCX )
2) I didn't know how to run (options...) fax2tiff (I run:   tiffcp -c none  -f msb2lsb instead), what are the options needed for fax2tiff ?

Regards,

**************************************************
* Uri Shkolnik - System Administrator            *
* Harmonic Lightwaves (Israel)                   *
* Tel: 972 6 6230150 Ext. 122   Fax: ~~ 6230151  *
* Email: uri@harmonic.co.il                      *
**************************************************

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 2 Apr 97 18:44:16 EST
To: flexfax@sgi.com
Subject: Re: Tiffg3, fax2tiff, etc.
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Is there some reason "fax2tiff -o filename.tif filename.fax" doesn't
work to convert some original filename.fax, tiffg3 to filename.tif, a
more standard TIFF?

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM0LvSz/+ItycgIJRAQHqQAP/eaftnUCYhpjddoe3KXpJo+2bF/8+weuv
pUky1QVoD5CJthYUXo29GDJXnK2dWEqLklIH09iwcFdit1N8IPwNuqyZpQ2xh2hA
GHjbz6T3lR4sPWu3Jx1555BXJVyFNW7QCUJCkWKUbh8LipOVrr/rIprkCI5un55P
M5rtd+0y2gM=
=egmw
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 15:50:37 -0800 (PST)
From: "Scott J. Kramer" <sjk@graham.com>
To: High Mercury <merc@icanect.net>
Cc: Alex Ongena <Alex.Ongena@able.be>, Hylafax list <flexfax@sgi.com>
Subject: Re: Unix FAX Software ?
Sender: owner-flexfax@celestial.com

On Wed,  2 Apr 1997 14:32 -0500, High Mercury wrote:

			[ . . . ]

    have you tried looking at faximum??? check out
    http://www.faximum.com
    
A couple of veteran fax products with UNIX servers & Win95 clients
are:

	FaxFX	http://www.devcom.com
	IsoFAX	http://www.bg.com

but neither supports Linux and I'm not aware of any commercial fax
products that do.  Perhaps there are Web/Java-based clients that'll
work, but finding a Linux-based server seems unlikely.  The freely-
available HylaFAX and mgetty might be all there is.

    has anyone tried that product and have any comments about it????

I couldn't use Faximum in a fax project I was working on at Cisco a
few years ago because we needed automatic routing of incoming faxen
and already had a partial investment in DID {hard,soft}ware, but I'd
say it's a decent product.  I don't know if George Pajari, maintainer
of the comp.dcom.fax FAQ in 1995, still works at Faximum Software, but
he's a knowledgable guy.

-sjk

-- 
Scott J. Kramer				Graham Technology Solutions
UNIX/Network Systems Administrator	20823 Stevens Creek Blvd., Suite 300
<sjk@graham.com>			Cupertino, CA  95014  USA
http://www.graham.com			+1.408.366.8001

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 02 Apr 1997 16:16:22 -0800
From: Steve Kapalko <kapalko@ibm.net>
To: flexfax@sgi.com
Subject: faxgetty/aix/inittab?
Sender: owner-flexfax@celestial.com

Would some kind soul enlighten me as to why the entry in the inittab
that fires up faxgetty keeps being overwritten on reboot with an entry
that calls getty.  This is on a ThinkPad850 running AIX4.1.5 and
hylaFAX-4.0pl0.

Thank You,
Steve

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 2 Apr 1997 19:30:14 -0500 (EST)
From: High Mercury <merc@icanect.net>
To: "Scott J. Kramer" <sjk@graham.com>
cc: Alex Ongena <Alex.Ongena@able.be>, Hylafax list <flexfax@sgi.com>
Subject: Re: Unix FAX Software ?
Sender: owner-flexfax@celestial.com

>     have you tried looking at faximum??? check out
>     http://www.faximum.com
>     
> A couple of veteran fax products with UNIX servers & Win95 clients
> are:
> 
> 	FaxFX	http://www.devcom.com
> 	IsoFAX	http://www.bg.com
> 
> but neither supports Linux and I'm not aware of any commercial fax
> products that do.  Perhaps there are Web/Java-based clients that'll
> work, but finding a Linux-based server seems unlikely.  The freely-
> available HylaFAX and mgetty might be all there is.
> 
>     has anyone tried that product and have any comments about it????
> 
> I couldn't use Faximum in a fax project I was working on at Cisco a
> few years ago because we needed automatic routing of incoming faxen
> and already had a partial investment in DID {hard,soft}ware, but I'd
> say it's a decent product.  I don't know if George Pajari, maintainer
> of the comp.dcom.fax FAQ in 1995, still works at Faximum Software, but
> he's a knowledgable guy.

How about www.brooktrout.com????  They have ip/fax routers that I believe
have support for did.....we're thinking about using brooktrout for a few
things....has anyone tried using the brooktrout ip fax router boards or
anything similar to it????

merc

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Steve Williams <steve@genie96.com>
Subject: Re: faxgetty/aix/inittab?
To: kapalko@ibm.net (Steve Kapalko)
Date: Wed, 2 Apr 1997 19:18:07 -0700 (MST)
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

> 
> Would some kind soul enlighten me as to why the entry in the inittab
> that fires up faxgetty keeps being overwritten on reboot with an entry
> that calls getty.  This is on a ThinkPad850 running AIX4.1.5 and
> hylaFAX-4.0pl0.
> 

Howdy,

Also, I have a binary distribution for pl1 together, but I don't know how
to get it onto ftp.sgi.com.  I have put it in the incoming directory, but
it fails to get moved into the binary directory.  Anyone have an idea????

If you want pl1 ( has nothing to do with your problem, by the way ), let me
know & I can ftp it to site of your choosing.

onto the problem...

Because that's the way that AIX is.  It has the ODM which stores all the
information & then builds the more "typical" string files that most people
like to see from that.  

It would appear that AIC rebuilds at least part of the inittab on every reboot.

If you read the INSTALL notes for AIX that I wrote up, you have to hack
a rc.local file that has the following line in it, to fix the inittab on
reboot:

>From the INSTALL Notes:

- There is a "hack" required to get dial in support to work nicely.  

- If you do not have an /etc/rc.local, you should probably add one to your 
  /etc/inittab. This gets into scary territory, because you are editing things
  that may make your system UNBOOTABLE.  I won't include directions here, 
  because if you don't know how to do this, you probably shouldn't be.  If
  you really want to do this, send me email & I'll help you out.

- I have included a "snippit" of my /etc/rc.local.  Paste it into yours if 
  you so desire, WITH APPROPRIATE MODIFICATIONS TO THE chitab LINE

- Sample portion of /etc/rc.local

	# Start up the Fax Daemon
	# do a ps first, to see if there is one running.  The PS includes
	# the PS process, so we need to subtract 1 to get the math correct

	num_faxd=`ps -ef | grep faxq | wc -l`
	if [ $num_faxd -eq 1 ]; then
		/usr/local/sbin/faxq > /dev/console 2>&1 # start fax 
	fi

	num_hfaxd=`ps -ef | grep hfaxd | wc -l`
	if [ $num_hfaxd -eq 1 ]; then
		/usr/local/sbin/hfaxd -i hylafax -o fax > /dev/console 2>&1 
	fi

************************************************************
******** this is the line you ( Steve ) need
************************************************************

	# Hack to get faxgetty into inittab
	num_faxgetty=`ps -ef | grep faxgetty | wc -l`
	if [ $num_faxgetty -eq 1 ]; then
		/etc/chitab "tty1:2:respawn:/usr/local/sbin/faxgetty /dev/tty1"
			     ^^^^ ****** Change ********
		sleep 2 ; telinit q
	fi
		

- The "hack" to get faxgetty into the inittab is necessary since the inittab
  is rebuilt on every reboot, with information from the ODM ( read SMIT ).
  SMIT doesn't ( yet ) let you put other programs in it to run instead of 
  getty, so the hack is necessary.  It works totally reliably.  I can't take
  credit for this, I received this tip from someone on the flexfax mailing
  list ( sorry I can't give you credit, I have lost any reference )

-- 
	Steve Williams, Calgary, Alberta, Canada
	Genie Computer Systems Inc.
	steve@genie96.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 03 Apr 1997 12:05:54 +0700
From: Ruediger Koch <rkoch@samart.co.th>
To: flexfax@sgi.com
CC: Hal J Schechner <hal-j@NetUSA.Net>
Subject: Re: pagesend replacement?
X-MIME-Autoconverted: from 8bit to quoted-printable by yum.samart.co.th id LAA21593
Sender: owner-flexfax@celestial.com

Hal J Schechner wrote:
> 
> Greetings,
> 
>     I just browsed through the mailing list archives, looking for a
> replacement for pagesend, that will work with non IXO/TAP pager
> systems.  Pretty much what I need is to be able to send something
> like phone-number,,,,,,,,message and be done with it.  I would be
> willing to assume that if the line was not busy, that the page was
> sent.  There was one thread I saw, that dealt with this, and the
> suggestion was made to write a pagesend replacement.  If this has been
> done by anyone, are they willing to share code?  If not, I'll write
> one.  Would anyone be interested?
> 
I guess that was me. I asked Mathias for some suggestions about that. My
problem was that I have a null modem connection to a pager terminal (and
that I had to do some language conversion for Thai characters. The
program is working so far, but it is not yet clean enough to distribute
it. The code is C and just about 100 lines long. If this is what you
want, I can mail it to you, but please understand that I don't put it in
the mailing list, since I do not want to show everybody what a bad
programmer I am ;-)

Best Regards
Rüdiger

-- 
Samart Corporation public Co., LTD.
555 Rasa Tower, 20th Floor, Phaholyotin Rd.   e-mail: rkoch@samart.co.th
Bangkok 10900, Thailand                          http://www.samart.co.th

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 17:12:04 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Tony Poole <tony@umcc.umcc.umich.edu>
cc: Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: WHFC 0.3a and Win95
Sender: owner-flexfax@celestial.com

On Thu, 3 Apr 1997, Jonathan Chen wrote:

> Ok. This is what I *had* to do to get our version to work:
>
>     1. make sure Faxcover points an existing file.
>     2. make sure the public phonebook points to existing non-empty
>        phonebook - just create one default entry.
>     3. Filled out *everything* on the system and user setup.
>
> 1. & 2. solved our freezeups. 3. solved some communication problems
> with our HylaFAX server.

To add to the list:

    4.  Postscript printer driver under Win95 had to have the output
        format to be "Archive format"
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Q: V4.0pl1, specify alternate destination for delivery?
To: fred@mediswitch.co.za (Fred Meyer)
Date: Thu, 3 Apr 1997 07:27:05 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Fred Meyer wrote:
    
    Hi,
    
    ...in the case that the desired, receiving loaction has more than one
    fax-machine/modem, each with a specific fax-number:
    
     -> is it possible to specify these alternate fax-numbers upon send, so
        that faxq will try to deliver the fax only ONCE to the location, but
        with all destination faxnumbers as resource?
    
    goal: reduce the risk of non-successful deliveries, if the receiving
          location has more than one fax-machine...speedup 4 delivery is
          quite possible as well.

The answer is no; actually there are no fields(s) for it
in the job file; feel free to provide a patch for it.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 00:59:10 -0500
From: Lothar Krauß <Lothar_Krauss@compuserve.com>
Subject: faxgetty/aix/inittab?
To: Steve Kapalko <kapalko@ibm.net>
Cc: "(unbekannt)" <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

> Would some kind soul enlighten me as to why the entry in the inittab
> that fires up faxgetty keeps being overwritten on reboot with an entry
> that calls getty.  This is on a ThinkPad850 running AIX4.1.5 and
> hylaFAX-4.0pl0.

you have to disable login in 'smit tty' and you should not name your new entry
'ttynn'. Otherwise AIX will read the ODM database at boot time and modify this
entry in /etc/inittab

Lothar Krauss
WBS Blank Software GmbH
Lothar_Krauss@compuserve.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 08:28:00 +0200 (MET DST)
From: "C.W.P. Schoenmakers" <cschoen@solair1.inter.NL.net>
To: Steve Kapalko <kapalko@ibm.net>
Cc: flexfax@sgi.com
Subject: Re: faxgetty/aix/inittab?
Sender: owner-flexfax@celestial.com

Hi there,

I'am not familiar with AIX but I guess reading the rc* scripts for booting
(maybe in /etc/rc.d) will tell you the reason.
There might be a init.base file (sort of).

Regards 

Kees


On Wed, 2 Apr 1997, Steve Kapalko wrote:

> Would some kind soul enlighten me as to why the entry in the inittab
> that fires up faxgetty keeps being overwritten on reboot with an entry
> that calls getty.  This is on a ThinkPad850 running AIX4.1.5 and
> hylaFAX-4.0pl0.
> 
> Thank You,
> Steve
> 
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 08:39:03 +0200 (MET DST)
From: "C.W.P. Schoenmakers" <cschoen@solair1.inter.NL.net>
To: flexfax@sgi.com
Subject: Routing incoming faxes under Unix/Linux
Sender: owner-flexfax@celestial.com


Hi all,

I never understood the way incoming routing for HylaFax is thought to be 
done.

What I would propose is a tool which allow the 'faxmaster' to read
only the FIRST page of an incomming fax and than have her/him to decide to
whom it is to be delivered .

The viewing tool might be a restricted 'viewfax' (X11) or 'bmv' (VGA)
program, it allows only to view the first page.
An audit log will record the actions of the faxmaster.
Faxes are transferred to the respective recipients into a .faxin
directory or so and a mail notice is sent. The corresponding data in HylaFax
directories is than deleted.

Comments welcome.

Kees

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 10:21:28 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: Hal J Schechner <hal-j@NetUSA.Net>
cc: flexfax@sgi.com
Subject: Re: pagesend replacement?
Sender: owner-flexfax@celestial.com



On Wed, 2 Apr 1997, Hal J Schechner wrote:

> Greetings,
> 
>     I just browsed through the mailing list archives, looking for a
> replacement for pagesend, that will work with non IXO/TAP pager 
> systems.  Pretty much what I need is to be able to send something
> like phone-number,,,,,,,,message and be done with it.

...hmmmm, some Service-Providers offer a Terminal-Login via modem.
This would be an intercative session to automate...Tcl plus Expect can
do exactly this.

Regards,
       Fred

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 11:58:43 +0200 (GMT+0200)
From: Uri Shkolnik <uri@harmonic.co.il>
To: raoul@cirl.meei.harvard.edu
cc: flexfax@sgi.com
Subject: Re: Tiffg3, fax2tiff, etc.
Sender: owner-flexfax@celestial.com

On Wed, 2 Apr 1997 raoul@cirl.meei.harvard.edu wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> 
> 
> Is there some reason "fax2tiff -o filename.tif filename.fax" doesn't
> work to convert some original filename.fax, tiffg3 to filename.tif, a
> more standard TIFF?

Thats why : 

{50}: fax2tiff -o test1.tif  fax02356.tif
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1135 (x 1664).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1139 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1143 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1144 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1152 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1155 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1159 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1165 (x 41).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1170 (x 75).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1177 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1182 (x 245).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1186 (x 35).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1190 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1193 (x 0).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1198 (x 808).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1200 (x 36).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1204 (x 40).
Fax3Decode1D: fax02356.tif: Bad code word at scanline 1206 (x 0).
{51}:
 
> 			Nico Garcia
> 			Engineer, CIRL 
> 			Mass. Eye and Ear Infirmary
> 			raoul@cirl.meei.harvard.edu
> 
> -----BEGIN PGP SIGNATURE-----
> Version: 2.6.2
> Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface
> 
> iQCVAwUBM0LvSz/+ItycgIJRAQHqQAP/eaftnUCYhpjddoe3KXpJo+2bF/8+weuv
> pUky1QVoD5CJthYUXo29GDJXnK2dWEqLklIH09iwcFdit1N8IPwNuqyZpQ2xh2hA
> GHjbz6T3lR4sPWu3Jx1555BXJVyFNW7QCUJCkWKUbh8LipOVrr/rIprkCI5un55P
> M5rtd+0y2gM=
> =egmw
> -----END PGP SIGNATURE-----
> 
Regards, 

**************************************************
* Uri Shkolnik - System Administrator            *
* Harmonic Lightwaves (Israel)                   *
* Tel: 972 6 6230150 Ext. 122   Fax: ~~ 6230151  *
* Email: uri@harmonic.co.il                      *
**************************************************

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 03 Apr 1997 18:23:00 +0200 (MET DST)
From: Ekkehard Burkon <burkon@pollux.edv.agrar.tu-muenchen.de>
To: flexfax@sgi.com
Subject: What to do with received faxes
Sender: owner-flexfax@celestial.com


I finally got Hylafax up and running.
I use the faxgetty to receive faxes and whfc
to send.

The problem is that received faxes often can not be read
by the wang imagine tool.

After copying the faxfiles with:
 tiffcp  -f msb2lsb /var/spool/fax/recvq/fax00005.tif test.tif

they can be viewed with this tool.
Now my question is how to automatise this process.
I read in this list that there is some script
which is executed after fax reception.

How is this script called, where is it to be located
and what parameter does it get?

I'd lik to put the copying process in there and build
a html file with all the necessary information and the
links to view the faxes out of the browser with imagine
as external viewer.

TNX
  Ekkehard

======================================================================
Ekkehard Burkon    | Email:     burkon@pollux.edv.agrar.tu-muenchen.de
Ismaninger Str. 28 | Phone:     +49-8161-871616
85356 Freising     | BBS & Fax: +49-8161-871617 
                   | Mobil:     +49-171-2724452 
URL: http://www.edv.agrar.tu-muenchen.de/cip/burkon.html
=======================================================================

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 10:31:02 -0700 (MST)
From: David Hayes <david@bdel.com>
Reply-To: David Hayes <david@bdel.com>
To: flexfax@sgi.com
Subject: Re: WHFC 0.3a and Win95
Organization: Black Diamond Equipment Ltd. - USA
Sender: owner-flexfax@celestial.com

[ other whfc problems snipped... ]

Since I upgraded to the newest whfc client a few days ago, all of my
outgoing faxes are failing with the following messages:

> Your facsimile job to 9,18007757625 was not sent because document conversion
> to facsimile failed.  The output from the converter program was:
> 
> Error: /undefined in cleartomar
> Operand stack:
>    --nostringval--   0   0   0   0   0   0   0
> Execution stack:
>    %interp_exit   --nostringval--   --nostringval--   --nostringval--   false   --nostringval--   --nostringval--   --nostringval--
> Dictionary stack:
>    --dict:603/631--   --dict:0/20--   --dict:39/200--   --dict:37/100--
> Current allocation mode is local
> Aladdin Ghostscript: Unrecoverable error, exit code 1
> 
> 
> Check any PostScript documents for non-standard fonts and invalid constructs.
> 
>     ---- Unsent job status ----
> 
>    Destination: 9,18007757625
>          JobID: 73
>        GroupID: 73
>         Sender: david hayes
>       Mailaddr: david@bdel.com
> Submitted From: godzilla.bdel.com
>     Page Width: 200 (mm)
>    Page Length: 264 (mm)
>     Resolution: 98 (lpi)
>         Status: Error: /undefined in cleartomar
> Operand stack:
>    --nostringval--   0   0   0   0   0   0   0
> Execution stack:
>    %interp_exit   --nostringval--   --nostringval--   --nostringval--   false   --nostringval--   --nostringval--   --nostringval--
> Dictionary stack:
>    --dict:603/631--   --dict:0/20--   --dict:39/200--   --dict:37/100--
> Current allocation mode is local
> Aladdin Ghostscript: Unrecoverable error, exit code 1
> 
>        Dialogs: 0 (exchanges with remote device)
>          Dials: 0 (consecutive failed calls to destination)
>          Calls: 0 (total phone calls placed)
>          Pages: 0 (pages transmitted)
>       TotPages: 0 (total pages to transmit)
>       Attempts: 0 (attempts to send current page)
>         Dirnum: 0 (directory of next page to send)
> 
>     ---- Documents submitted for transmission ----
> 
> The following documents were submitted for transmission and are
> available on the server for reuse until they are automatically
> purged when this job is removed.  Documents may also be manually
> removed using the faxrm command; consult faxrm(1) for information.
> 
> Filename                 Size Type
> docq/doc77.ps.73            0 PostScript

I switched back to the previous version of whfc, and I can fax fine.  Any
ideas?

The server is running RedHat Linux v4.0 with Hylafax-v4.0pl1 and
Ghostscript 3.33.  The the client is NT Workstation v4.0, MS Word, and the
QMS-PS 820 v51.7 printer driver, FWIW.

--david

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 11:53:00 -0600 (CST)
From: David Smith <david@bcm.tmc.edu>
To: flexfax@sgi.com
Subject: Pager only modems?
Sender: owner-flexfax@celestial.com

Anyone tried to use pager only modems (modems that don't support faxing?)

I need to be able to have more paging lines than faxing ones, and already 
have soem good modems for it, but they don't support faxing.  Has anyone 
been able to get hulafax to talk to non fax modems?

Thanks.


-----------------------------------------------------------------------
David A. Smith                          | Baylor College of Medicine
Systems Services                        | Enterprise Services, MEDT1103
(713) 798-4560                          | One Baylor Plaza
Internet:  david@bcm.tmc.edu            | Houston, TX  77030

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu,  3 Apr 1997 09:57:35 -0800 (PST)
From: Anthony Talltree <aad@nwnet.net>
To: Hylafax list <flexfax@sgi.com>
Subject: Re: Unix FAX Software ?
Sender: owner-flexfax@celestial.com

>I couldn't use Faximum in a fax project I was working on at Cisco a
>few years ago because we needed automatic routing of incoming faxen

How could a G3 fax be routed anyway?  Image processing to extract a
receipient from a cover sheet?

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 3 Apr 1997 12:20:17 -0800 (PST)
From: "Scott J. Kramer" <sjk@graham.com>
To: Anthony Talltree <aad@nwnet.net>
Cc: Hylafax list <flexfax@sgi.com>
Subject: Re: Unix FAX Software ?
Sender: owner-flexfax@celestial.com

On Thu,  3 Apr 1997 09:57 -0800, Anthony Talltree wrote:

    >I couldn't use Faximum in a fax project I was working on at Cisco a
    >few years ago because we needed automatic routing of incoming faxen
    
    How could a G3 fax be routed anyway?  Image processing to extract a
    receipient from a cover sheet?

Direct Inward Dialing (DID) routing provided everyone with unique
{hard,soft}ware-decoded fax numbers.  There's an explanation of it
at http://www.brooktrout.com/white/did.htm if you're interested.
And see http://www.faximum.com/faqs/fax.questions#Q.12 for other
fax routing methods.  I read something about T.30 (or some other
subaddressing standard?) being supported by more fax products in
the future, but that's a vague memory now that I'm out of the
fax support game (whew! :-).  Maybe other folks here have more
up-to-date info about that.

-sjk


From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Thu, 3 Apr 97 16:48:18 EST
To: flexfax@sgi.com
Subject: Re: Tiffg3, fax2tiff, etc.
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Uri wrote:
  On Wed, 2 Apr 1997 raoul@cirl.meei.harvard.edu wrote:

  > -----BEGIN PGP SIGNED MESSAGE-----
  > 
  > 
  > Is there some reason "fax2tiff -o filename.tif filename.fax" doesn't
  > work to convert some original filename.fax, tiffg3 to filename.tif, a
  > more standard TIFF?

  Thats why : 

  {50}: fax2tiff -o test1.tif  fax02356.tif
  Fax3Decode1D: fax02356.tif: Bad code word at scanline 1135 (x 1664).
  Fax3Decode1D: fax02356.tif: Bad code word at scanline 1139 (x 0).
  Fax3Decode1D: fax02356.tif: Bad code word at scanline 1143 (x 0).
  Fax3Decode1D: fax02356.tif: Bad code word at scanline 1144 (x 0).
  Fax3Decode1D: fax02356.tif: Bad code word at scanline 1152 (x 0).
  Fax3Decode1D: fax02356.tif: Bad code word at scanline 1155 (x 0).

I just ignored these, and the files looked fine under XV.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM0QlnD/+ItycgIJRAQENXwP9GEQ7Qkf59KL+yHZBZLfrt3rbT4mA/mrF
xTFY5KXNHdoJoeIm649r9ERrWhDMnuz/nGjyRfhZHyYnKJfCZv/WH1PslYdxa01C
Iyf3MThehIfFi7BQLX2BONzXQ4fETM0oKTYw5jazqSXphAAr447fhcAzEtsLXrVf
irjPJiybwAs=
=GmAO
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 4 Apr 1997 10:44:56 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: David Hayes <david@bdel.com>
cc: flexfax@sgi.com
Subject: Re: WHFC 0.3a and Win95
Sender: owner-flexfax@celestial.com

On Thu, 3 Apr 1997, David Hayes wrote:

> [ other whfc problems snipped... ]
> 
> Since I upgraded to the newest whfc client a few days ago, all of my
> outgoing faxes are failing with the following messages:
> 
> > Your facsimile job to 9,18007757625 was not sent because document conversion
> > to facsimile failed.  The output from the converter program was:
> > 
> > Error: /undefined in cleartomar
> > Operand stack:
> >    --nostringval--   0   0   0   0   0   0   0
> 
[snip]
> I switched back to the previous version of whfc, and I can fax fine.  Any
> ideas?

It's the Faxcover stuff, I think. If you leave the Faxcover unchecked
it should work - or else you may care to generate a new working
faxcver (mentioned sometime earlier this month).
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 4 Apr 1997 11:35:29 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Hylafax Mailing list <flexfax@sgi.com>
Subject: Writing a HylaFAX client...
Sender: owner-flexfax@celestial.com

Hi y'all,

I'm seriously thinking of writing Yet-Another-HylaFAX-Client, but
the main problem I have at the moment is that I don't quite understand
just how the data-transfer from client -> host works at the moment.

The output from "sendfax -v -v" helps quite a bit:

    Trying localhost (127.0.0.1) at port 4559...
    Connected to localhost.pinnacle.co.nz.
    220 kiwi.pinnacle.co.nz server (HylaFAX (tm) Version 4.0pl1) ready.
    -> USER jonc

    [snip-text-conversion-match-stuff]

    -> TYPE I
    200 Type set to Image.
    SEND compressed data, 7938 bytes
    -> PORT 127,0,0,1,7,67
    200 PORT command successful.
    -> MODE Z
    200 Mode set to ZIP.
    -> STOT
    150 FILE: /tmp/doc179.ps (Opening new data connection).
    SEND 2900 bytes transmitted (2.7x compression)
    226 Transfer complete (FILE: /tmp/doc179.ps).
    -> JNEW
    200 New job created: jobid: 95 groupid: 95.
    -> JPARM FROMUSER "Jonathan Chen"
    213 FROMUSER set to "Jonathan Chen".
    -> JPARM LASTTIME 000300
    213 LASTTIME set to 000300.

    [snip-lotsa-JPARM-stuff]

    -> JPARM PAGECHOP "default"
    213 PAGECHOP set to "default".
    -> JPARM CHOPTHRESHOLD 3
    213 CHOPTHRESHOLD set to 3.
    SEND compressed data, 8966 bytes
    -> PORT 127,0,0,1,7,69
    200 PORT command successful.
    -> STOT
    150 FILE: /tmp/doc180.ps (Opening new data connection).
    SEND 3403 bytes transmitted (2.6x compression)
    226 Transfer complete (FILE: /tmp/doc180.ps).
    -> JPARM COVER /tmp/doc180.ps
    200 Added cover page document /tmp/doc180.ps as docq/doc95.cover.
    -> JPARM DOCUMENT /tmp/doc179.ps
    200 Added document /tmp/doc179.ps as docq/doc179.ps.95.
    -> JSUBM
    200 Job 95 submitted.

The control stuff looks pretty simple. It's the PORT command that
throws me somewhat. "127,0,0,1" refers to localhost IP-address, and
the last 2 numbers "7,67" (for the document) and "7,69" (for the
cover page) probably refers to the data port. The questions are:

    1.  how does "7,67"/"7,69" translate to a data-port?
    2.  And where did the client come up with that number? I was
        always under the impression that the server had to be `listen'ing
        on a particular port for a client connection; but nowhere in
        the transcript did the HylaFAX server indicate which port the
        client should use.

Help, anyone? I basically don't want to wade thru' the HylaFAX code at
the moment..
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 4 Apr 1997 11:46:39 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Ekkehard Burkon <burkon@pollux.edv.agrar.tu-muenchen.de>
cc: flexfax@sgi.com
Subject: Re: What to do with received faxes
Sender: owner-flexfax@celestial.com

On Thu, 3 Apr 1997, Ekkehard Burkon wrote:

> Now my question is how to automatise this process.
> I read in this list that there is some script
> which is executed after fax reception.
> 
> How is this script called, where is it to be located
> and what parameter does it get?

man faxrcvd. It's located in ..../spool/fax/bin/faxrcvd. It's a shell
script designed for local tailoring.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 03 Apr 1997 20:06:31 -0500
From: Ravi Pina <falcon@gersh.org>
Organization: Web Marketing, Inc.
To: tim@futuresouth.com, Michael-Brantley@deshaw.com
CC: flexfax@sgi.com
Subject: email2page
Sender: owner-flexfax@celestial.com

I have modified a version of email2page to split up email messages up
into multiple pages and done some other nice things.  I put it up for
public ftp at ftp://ftp.webmrkt.com/pub/falcon/email2page

Suggestions and comments are always welcome.

The only thing you will need is perl 5.xxx and HylaFAX/sendpage

If you have any questions, you can mail me.

--
Ravi Pina              * "I am forbidden to produce milk.  In cyberland,
Systems Administrator  *  we only drink Diet Coke(tm)." - RENT
Web Marketing, Inc.    * "Its 106 miles to Chicago, we've got a full
falcon@webmrkt.com     *  tank of gas, half a pack of cigarettes, its
http://www.webmrkt.com *  dark and we're wearing sunglasses." - Blu'B'rs

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: Jonathan Chen <jonc@pinnacle.co.nz>
Cc: <flexfax@sgi.com>
Subject: Re: Writing a HylaFAX client...
From: Phil Abercrombie <phil@comp.vuw.ac.nz>
Date: 04 Apr 1997 13:36:56 +1200
Lines: 64
Sender: owner-flexfax@celestial.com


Jonathan Chen <jonc@pinnacle.co.nz> writes:

> Hi y'all,
> 
> I'm seriously thinking of writing Yet-Another-HylaFAX-Client, but
> the main problem I have at the moment is that I don't quite understand
> just how the data-transfer from client -> host works at the moment.

Hi Jonathan.  You need to read rfc959, the FTP protocol
specification.  Sam's HylaFAX protocol is very closely based on this.

If you can find a library for your chosen client platform and language
which implements the FTP protocol, yet is itself extensible, you may
be able to cut a lot of corners.

For example, I have done this in perl using Net::FTP, and found it
pretty easy.

> The control stuff looks pretty simple. It's the PORT command that
> throws me somewhat. "127,0,0,1" refers to localhost IP-address, and
> the last 2 numbers "7,67" (for the document) and "7,69" (for the
> cover page) probably refers to the data port. The questions are:
> 
>     1.  how does "7,67"/"7,69" translate to a data-port?
>     2.  And where did the client come up with that number? I was
>         always under the impression that the server had to be `listen'ing
>         on a particular port for a client connection; but nowhere in
>         the transcript did the HylaFAX server indicate which port the
>         client should use.


>From rfc959, section 4.1.2

DATA PORT (PORT)

            The argument is a HOST-PORT specification for the data port
            to be used in data connection.  There are defaults for both
            the user and server data ports, and under normal
            circumstances this command and its reply are not needed.  If
            this command is used, the argument is the concatenation of a
            32-bit internet host address and a 16-bit TCP port address.
            This address information is broken into 8-bit fields and the
            value of each field is transmitted as a decimal number (in
            character string representation).  The fields are separated
            by commas.  A port command would be:

               PORT h1,h2,h3,h4,p1,p2

            where h1 is the high order 8 bits of the internet host
            address.


I think the client typically comes up with that number by creating a
"listen" socket at the same address as the client end of the command
socket which is talking to the ftp daemon.

        -phil



-- 
 Phil Abercrombie
 +64 4 495 5126

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 4 Apr 1997 14:49:32 +0800 (SST)
From: Mathias Koerber <mathias@staff.singnet.com.sg>
Reply-To: mathias@staff.singnet.com.sg
To: Flexfax Mailing List <flexfax@sgi.com>
cc: cleng@staff.singnet.com.sg
Subject: Problems with ZyXel 1496R+ (rack modem)
X-Disclaimer: I don't speak for anyone except for myself (and to myself sometimes)
Organization: SingNet
Sender: owner-flexfax@celestial.com

Hi all,

I have a problem with a Zyxel 1496R+ Rack mounted modem...

I could compile, install and configure Hylafax fine. It recognises the
modem, can talk to etc. But when I try to send to my local fax-machine,
it dials, the fax picks up, but they don't exchange any training signals,
and hylafax gives up after a while with NO CARRIER.

I can send to the same faxmachine from an older Hylafax installation, which
uses a standalone Zyxel 1496S modem..

It seems it is either a problem with the cabling (the rackmounted Zyxels
are connected via loose wires in the back :-(, my modem
settings  or the firmware version..

Does anyone have any hints for me???

Tia
Mathias

Here is the information on my 1496R+ (rack modem):

	OK
	AT+FMDL?                                                                            
	U1496R+  V 6.14                                                                     
											    
	OK                                                                                  
	AT+FMFR?                                                                            
	ZyXEL

	OK
	AT+FREV?
	U1496R+  V 6.14   

	OK
	AT&V

	Current   Settings............

	 B0   E1   L1   M1   N7   Q0   V1   X4  
	&B1  &C1  &D2  &G0  &H3  &J0  &K4  &L0  &M0  &N0  &P0  &R0  &S0  &X0  &Y1  
	*B0  *C0  *D0  *E0  *F0  *G0  *I0  *L0  *M0  *P9  *Q2  *S0  

	S00=000   S01=000   S02=043   S03=013   S04=010   
	S05=008   S06=003   S07=045   S08=002   S09=006   
	S10=006   S11=070   S12=000   S13=000   S14=002   
	S15=002   S16=000   S17=018   S18=002   S19=000   
	S20=002   S21=146   S22=008   S23=097   S24=046   
	S25=000   S26=000   S27=156   S28=068   S29=000   
	S30=000   S31=017   S32=019   S33=255   S34=030   
	S35=034   S36=000   S37=000   S38=008   S39=000   
	S40=000   S41=000   S42=000   S43=000   S44=000   
	S45=100   S46=028   S47=064   S48=000   S49=000   
	S50=000   S51=000   S52=000   S53=000   S54=000   
	S55=000   S56=000   S57=000   S58=000   S59=000

Here are the config files:

	# cat config
	LogFacility:            daemon
	CountryCode:            65
	AreaCode:               ""
	LongDistancePrefix:     02
	InternationalPrefix:    001
	DialStringRules:        "etc/dialrules"
	ServerTracing:          11
	ContCoverPage:          continuecover.ps
	PostScriptTimeout:      300



	# cat config.cua1
	# $Id: zyxel-1496e-2.0,v 1.19 1996/06/24 02:58:44 sam Rel $
	#
	# HylaFAX Facsimile Software
	#
	# Copyright (c) 1990-1996 Sam Leffler
	# Copyright (c) 1991-1996 Silicon Graphics, Inc.
	# HylaFAX is a trademark of Silicon Graphics, Inc.
	# 
	# Permission to use, copy, modify, distribute, and sell this software and 
	# its documentation for any purpose is hereby granted without fee, provided
	# that (i) the above copyright notices and this permission notice appear in
	# all copies of the software and related documentation, and (ii) the names of
	# Sam Leffler and Silicon Graphics may not be used in any advertising or
	# publicity relating to the software without the specific, prior written
	# permission of Sam Leffler and Silicon Graphics.
	# 
	# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
	# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
	# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
	# 
	# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
	# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
	# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
	# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
	# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
	# OF THIS SOFTWARE.
	#

	#
	# Configuration for a ZyXEL-1496E or 2864 w/ Class 2.0 firmware.
	# Firmware revisions from 6.12 on should work for the 1496E; for
	# the 2864 you must have firmware rev 0.07 or later.
	#
	# This configuration file sets up the ZyXEL to run at 38.4 for
	# both sending and receiving.  RTS/CTS flow control is used on
	# the tty port--you probably shouldn't use XON/XOFF.  Note that
	# on an SGI system the getty speed is the following non-standard
	# gettydefs entry:
	#
	# dx_38400# B38400 # B38400 SANE TAB3 HUPCL #\r\n\n$HOSTNAME login: #dx_38400
	#
	#
	CountryCode:            65
	AreaCode:               ""
	FAXNumber:              +65.4767112
	LongDistancePrefix:     02
	InternationalPrefix:    001
	DialStringRules:        "etc/dialrules"
	ServerTracing:          11
	SessionTracing:         11
	RecvFileMode:           0600
	LogFileMode:            0600
	DeviceMode:             0600
	RingsBeforeAnswer:      1
	SpeakerVolume:          medium
	GettyArgs:              "-h %l dx_%s"
	LocalIdentifier:        SingNet
	TagLineFont:            etc/lutRS18.pcf
	TagLineFormat:          "From %%l|%c|Page %%p of %%t"
	NoCarrierRetrys:        3
	MaxRecvPages:           25
	#
	#
	# Modem-related stuff: should reflect modem command interface
	# and hardware connection/cabling (e.g. flow control).
	#
	ModemType:              Class2.0        # use class 2.0 interface
	ModemRate:              38400           # 38.4 works fine
	ModemFlowControl:       rtscts          # default
	#
	ModemNoFlowCmd:         AT&H0           # disable flow control
	ModemHardFlowCmd:       AT&H3           # hardware flow control
	ModemSoftFlowCmd:       AT&H4           # software flow control
	ModemSetupDTRCmd:       AT&D2           # DTR off causes modem to hang up
	ModemSetupDCDCmd:       AT&C1           # DCD tracks carrier
	#
	ModemSetupAACmd:        AT+FAA=1        # enable in current class
	#
	# Additional reset commands:
	#
	# &B1     DTE-DCE rate is fixed at DTE setting
	# &N0     Auto-negotiate highest possible DCE-DCE link rate
	# &S0     DSR always on
	# *F0     Deny remote configuration
	# S18=2   Receive at 38400
	# S38.3=1 DCD on/off sequence follows UNIX standard; also
	#         fix receiving baud rate at S18 value
	# S39=0   (avoid Class 2 compatibility hacks)
	# 
	ModemResetCmds:         AT&B1&N0&S0*F0S18=2S38.3=1S39=0
	#
	ModemDialCmd:           ATDT%s          # no '@' 'cuz then busy not recognized
	NoCarrierRetrys:        3               # retry 3 times on no carrier
	#
	ModemSetVolumeCmd:      "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
	#
	# Caller ID configuration setup.
	#
	#QualifyCID:            etc/cid         # CID access control list file
	#CIDNumber:             "CALLER NUMBER: " # pattern string for phone number info
	#CIDName:               "CALLER NAME: " # pattern string for identity info
	#
	PagerSetupCmds:         AT&K0&N15       # use V.22 at 1200 bps (PageNet)
	#
	# Rev 6.1x firmware have a bug in the ECM support so
	# explicitly disable it's use.  To re-enable its use just
	# comment out the following line.
	#
	Class2DCCQueryCmd:      "!(0,1),(0-5),(0-4),(0-2),(0,1),(0),(0),(0-7)"

and here the logs:

	# cat xferlog

	04/04/97 12:43  SEND    00000002        cua1    3       ""      mathias@thunderfax.singnet.com.sg       "+654753273"    ""      65535   0    1:12     0:00    "Job aborted by user"
	04/04/97 12:45  SEND    00000003        cua1    5       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:11     0:00    "Job aborted by user"
	04/04/97 12:52  SEND    00000004        cua1    6       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:04     0:00    "No carrier detected"
	04/04/97 12:54  SEND    00000005        cua1    6       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:04     0:00    "No carrier detected"
	04/04/97 13:00  SEND    00000006        cua1    6       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:05     0:00    "No carrier detected"
	04/04/97 13:05  SEND    00000007        cua1    6       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:04     0:00    "No carrier detected"
	04/04/97 13:17  SEND    00000008        cua1    7       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:05     0:00    "No carrier detected"
	04/04/97 13:56  SEND    00000009        cua1    7       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    0:25     0:00    "Job aborted by user"
	04/04/97 13:57  SEND    00000010        cua1    8       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:34     0:00    "No carrier detected"
	04/04/97 14:02  SEND    00000011        cua1    8       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:05     0:00    "No carrier detected"
	04/04/97 14:09  SEND    00000012        cua1    8       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:04     0:00    "No carrier detected"
	04/04/97 14:16  SEND    00000013        cua1    8       ""      mathias@thunderfax.singnet.com.sg       "+65.4753273"   ""      65535   0    1:33     0:00    "No carrier detected"


	# cat *13
	Apr 04 14:16:49.10: [ 9653]: SESSION BEGIN 00000013 654753273
	Apr 04 14:16:49.10: [ 9653]: SEND FAX: JOB 8 DEST +65.4753273 COMMID 00000013
	Apr 04 14:16:49.10: [ 9653]: DELAY 2600 ms
	Apr 04 14:16:51.71: [ 9653]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
	Apr 04 14:16:51.93: [ 9653]: --> [2:OK]
	Apr 04 14:16:51.93: [ 9653]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
	Apr 04 14:16:51.95: [ 9653]: --> [2:OK]
	Apr 04 14:16:51.95: [ 9653]: <-- [14:AT+FCLASS=2.0\r]
	Apr 04 14:16:52.08: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.08: [ 9653]: <-- [9:AT+FLO=2\r]
	Apr 04 14:16:52.09: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.09: [ 9653]: <-- [9:AT+FPP=0\r]
	Apr 04 14:16:52.10: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.10: [ 9653]: <-- [9:AT+FBO=0\r]
	Apr 04 14:16:52.11: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.11: [ 9653]: <-- [10:AT+FCT=30\r]
	Apr 04 14:16:52.12: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.12: [ 9653]: <-- [15:AT+FNR=1,1,1,1\r]
	Apr 04 14:16:52.13: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.13: [ 9653]: <-- [9:AT+FIE=0\r]
	Apr 04 14:16:52.14: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.14: [ 9653]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
	Apr 04 14:16:52.16: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.16: [ 9653]: <-- [7:ATM1L5\r]
	Apr 04 14:16:52.17: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.17: [ 9653]: <-- [14:AT+FCLASS=2.0\r]
	Apr 04 14:16:52.40: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.40: [ 9653]: <-- [9:AT+FLO=2\r]
	Apr 04 14:16:52.51: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.51: [ 9653]: <-- [9:AT+FPP=0\r]
	Apr 04 14:16:52.62: [ 9653]: --> [2:OK]
	Apr 04 14:16:52.62: [ 9653]: <-- [9:AT+FBO=0\r]
	Apr 04 14:17:22.62: [ 9653]: MODEM <Timeout>
	Apr 04 14:17:22.62: [ 9653]: <-- [10:AT+FCT=30\r]
	Apr 04 14:17:22.73: [ 9653]: --> [2:OK]
	Apr 04 14:17:22.73: [ 9653]: <-- [15:AT+FNR=1,1,1,1\r]
	Apr 04 14:17:22.84: [ 9653]: --> [2:OK]
	Apr 04 14:17:22.84: [ 9653]: <-- [9:AT+FIE=0\r]
	Apr 04 14:17:22.95: [ 9653]: --> [2:OK]
	Apr 04 14:17:22.95: [ 9653]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
	Apr 04 14:17:23.07: [ 9653]: --> [2:OK]
	Apr 04 14:17:23.07: [ 9653]: <-- [17:AT+FLI="SingNet"\r]
	Apr 04 14:17:23.18: [ 9653]: --> [2:OK]
	Apr 04 14:17:23.18: [ 9653]: DIAL 4753273@
	Apr 04 14:17:23.18: [ 9653]: <-- [13:ATDT4753273@\r]
	Apr 04 14:18:22.60: [ 9653]: --> [10:NO CARRIER]
	Apr 04 14:18:22.60: [ 9653]: SEND FAILED: No carrier detected
	Apr 04 14:18:22.60: [ 9653]: <-- [5:ATH0\r]
	Apr 04 14:18:22.91: [ 9653]: --> [2:OK]
	Apr 04 14:18:22.91: [ 9653]: SESSION END

My system is a 
	#  uname -a
	Linux faxserver 2.0.29 #1 Wed Feb 12 16:32:07 SGT 1997 i586

Here is the info about the working, standlone modem:

	OK
	at                                                                                  
	OK                                                                                  
	AT+FMDL?                                                                            
	U1496S  V 6.12 P                                                                    
											    
	OK
	AT+FMFR?
	ZyXEL
	OK
	AT+FREV?
	U1496S  V 6.12 P  

	OK
	AT&V

	Current   Settings............

	 B0   E1   L1   M0   N0   Q0   V1   X4  
	&B1  &C1  &D2  &G0  &H3  &J0  &K0  &L0  &M0  &N0  &P0  &R0  &S0  &X0  &Y1  
	*B0  *C0  *D0  *E0  *F0  *G0  *I0  *L0  *M0  *P9  *Q2  *S0  

	S00=000   S01=000   S02=043   S03=013   S04=010   
	S05=008   S06=003   S07=045   S08=002   S09=006   
	S10=007   S11=070   S12=000   S13=000   S14=002   
	S15=002   S16=000   S17=018   S18=002   S19=000   
	S20=011   S21=144   S22=000   S23=097   S24=032   
	S25=000   S26=000   S27=152   S28=068   S29=000   
	S30=000   S31=017   S32=019   S33=255   S34=030   
	S35=032   S36=000   S37=000   S38=008   S39=000   
	S40=000   S41=000   S42=000   S43=000   S44=000   
	S45=100   S46=028   S47=064   S48=000   S49=000   
	S50=000   S51=000   S52=000   S53=000   S54=000   
	S55=000   S56=000   S57=000   S58=000   S59=000   

	OK



Mathias Koerber	  | Tel: +65 / 471 9820    |   mathias@staff.singnet.com.sg
SingNet NOC	  | Fax: +65 / 475 3273    |            mathias@koerber.org
Q'town Tel. Exch. | PGP: Keyid: 768/25E082BD, finger mathias@singnet.com.sg
2 Stirling Rd     |      1A 8B FC D4 93 F1 9A FC BD 98 A3 1A 0E 73 01 65
S'pore 148943     | Disclaimer: I speak only for myself
* Eifersucht ist eine Leidenschaft, die mit Eifer sucht, was Leiden schafft *

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Alexandre Meissonnier <ameissonnier@dohle.com>
To: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: Waiting for modem to come ready
Date: Fri, 4 Apr 1997 10:17:02 +0200
Sender: owner-flexfax@celestial.com

Hi all,

I'm stuck with my HylaFAX installation on a SCO 5.0.2 machine, using a 
USR Sportster Voice 33.600 modem.

First, I installed the fax server in send-only mode and it worked fine. 
Then, I installed a faxgetty to receive faxes, I can't even send anything anymore.
The faxstat command keeps saying 'Waiting for modem to come ready', and 
resetting the modem doesn't change this. 

Here is an excerpt of my syslog file:

First, the log written at boot time:

Apr  3 11:46:17 idefix2 FaxQueuer[252]: No regular expression for modem class
Apr  3 11:46:17 idefix2 FaxQueuer[252]: No regular expression for modem class
Apr  3 11:46:17 idefix2 FaxQueuer[252]: HylaFAX (tm) Version 4.0pl1
Apr  3 11:46:17 idefix2 FaxQueuer[252]: Copyright (c) 1990-1996 Sam Leffler
Apr  3 11:46:17 idefix2 FaxQueuer[252]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
Apr  3 11:46:56 idefix2 FaxGetty[596]: OPEN /dev/tty2A
Apr  3 11:46:56 idefix2 FaxGetty[596]: DELAY 2600 ms
Apr  3 11:46:59 idefix2 FaxGetty[596]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr  3 11:46:59 idefix2 FaxGetty[596]: --> [16:ATE0V1Q0X4S0=0H0]
Apr  3 11:46:59 idefix2 FaxGetty[596]: --> [2:OK]
Apr  3 11:46:59 idefix2 FaxGetty[596]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Apr  3 11:47:00 idefix2 FaxGetty[596]: --> [2:OK]
Apr  3 11:47:00 idefix2 FaxGetty[596]: <-- [12:AT+FCLASS=?\r]
Apr  3 11:47:00 idefix2 FaxGetty[596]: --> [7:0,1,2.0]
Apr  3 11:47:00 idefix2 FaxGetty[596]: --> [2:OK]
Apr  3 11:47:00 idefix2 FaxGetty[596]: <-- [14:AT+FCLASS=2.0\r]
Apr  3 11:47:00 idefix2 FaxGetty[596]: --> [2:OK]
Apr  3 11:47:00 idefix2 FaxGetty[596]: <-- [8:AT+FMI?\r]
Apr  3 11:47:00 idefix2 FaxGetty[596]: --> [31:USRobotics Sportster V.34+ FAX ]
Apr  3 11:47:00 idefix2 FaxGetty[596]: --> [2:OK]
... plus lots of other FaxGetty lines, all with an OK response.

At this point, faxstat says 'running and idle'.
When I try to send a fax, the following happens:

Apr  3 12:22:20 idefix2 FaxQueuer[252]: SUBMIT JOB 31
Apr  3 12:22:25 idefix2 FaxSend[704]: DELAY 2600 ms
Apr  3 12:22:27 idefix2 FaxSend[704]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr  3 12:22:32 idefix2 FaxSend[704]: MODEM <Timeout>
Apr  3 12:22:32 idefix2 FaxSend[704]: DELAY 2600 ms
Apr  3 12:22:35 idefix2 FaxSend[704]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr  3 12:22:40 idefix2 FaxSend[704]: MODEM <Timeout>
Apr  3 12:22:40 idefix2 FaxSend[704]: /dev/tty2A: Can not initialize modem.

[several retries, with the same result]

Apr  3 12:24:12 idefix2 FaxSend[704]: Unable to setup modem on /dev/tty2A; giving up after 2 attempts
Apr  3 12:24:12 idefix2 FaxQueuer[252]: MODEM /dev/tty2A appears to be wedged
Apr  3 12:24:12 idefix2 FaxQueuer[252]: MODEM /dev/tty2A appears to be wedged
Apr  3 12:24:12 idefix2 FaxQueuer[252]: MODEM WEDGED: bin/wedged "tty2A" "/dev/tty2A"

[lots of other retries (several pages of log), an finally...]

Apr  3 15:21:20 idefix2 FaxQueuer[252]: NOTIFY: bin/notify "doneq/q31" "timedout" ""
Apr  3 15:18:04 idefix2 FaxQueuer[252]: MODEM /dev/tty2A appears to be wedged


Can anyone help me?

Thanks in advance,

--
Alexandre Meissonnier
Dohle Handelsgruppe Systemberatung GmbH
53719 Siegburg, Germany
ameissonnier@dohle.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 4 Apr 1997 11:30:42 -0700 (MST)
From: David Hayes <david@bdel.com>
Reply-To: David Hayes <david@bdel.com>
To: Jonathan Chen <jonc@pinnacle.co.nz>
cc: flexfax@sgi.com
Subject: Re: WHFC 0.3a and Win95
Organization: Black Diamond Equipment Ltd. - USA
Sender: owner-flexfax@celestial.com

On Fri, 4 Apr 1997, Jonathan Chen wrote:

> It's the Faxcover stuff, I think. If you leave the Faxcover unchecked
> it should work - or else you may care to generate a new working
> faxcver (mentioned sometime earlier this month).

Nope- I get the same thing with the faxcover stuff unchecked.  

Thanks for the reply though.  I'll let you know if I get it figured out. 

--david

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Re: Writing a HylaFAX client...
Date: Sat, 5 Apr 97 22:36:34 -0000
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: "Phil Abercrombie" <phil@comp.vuw.ac.nz>,
        "Jonathan Chen" <jonc@pinnacle.co.nz>
cc: <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

>If you can find a library for your chosen client platform and language
>which implements the FTP protocol, yet is itself extensible, you may
>be able to cut a lot of corners.

Yep! That's what I'm trying right now. I've got a Visual FoxPro app to 
handle the numbers of customers with email addresses and other info. I 
got hylafax working fair using samba to get me between the Win box and 
the Linux Fax server but it felt clunky. I've since found some activeX 
controls from Mabry that handle the FTP side of things. Although my 
coding techniques using Ole and OCX's isn't that good yet, the app seems 
to be getting close. If anyone wants to talk about the control contact me 
off list and I'll help if I can. I too though seem to really have a 
problem figuring out this "data port" portion of the PORT command though.




Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    32mgs     7.1gigs       RH 4.0, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.0 Linux
486 dx100      12mgs     420megs      Xenix, Win3.x, Linux
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: ghostscript and win95 (fwd)
To: flexfax@sgi.com
Date: Sun, 6 Apr 1997 13:15:37 +0200 (MSZ)
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Date: Thu, 03 Apr 1997 10:01:19 -0800
>From: Fred <cardwell@sfu.ca>
Reply-To: cardwell@sfu.ca
To: flexfaq@SOFTCON.de
Subject: ghostscript and win95

This seems to be a pretty well covered topic in the Mailing list
archives - but I would like ask one more question about ghostscript and
Win95:

The FAQ Q163 refers to the following fix for being able to use
Ghostscript 2.6x and Win95 postscipt print drivers to solve the 'memory
error':

>"I think that this has nothing to do with winflex nor Hylafax. I had a
> similar problem and that was caused by Ghostscript 2.6x and Win95 > Postscript output in general. I upgraded to Ghostscript 4.01 and the > problem was gone.

>     An alternative is to run following script on you PS output to > remove the error code from the PS file. This worked for me for GS 2.6x > files and Win95.

>             #!/bin/sh
>             sed '/^\/VM?/,/ VM?/d' $1 > outp         "
							

I upgrade to GS 4.01 and found that it does fix this bug - however I
noticed a great increase in system resource demand for converting the
postscript files to tiff files - (it seems to take much longer to
preform the same task that Gs 2.6x). 

I would therefore like to stick with Gs 2.6x and apply the above
mentioned fix. 

My question is:	Can I insert this sed command into one of the sendfax
script files to automatically ammend the postscript files comming from a
Winflex client? If this can be automated - where and in which script
would I place the command. (Not being well versed in Sed - I have
attempted to do this but failed)

Has anyone automated a good fix for this problem?

Thank's

James Cardwell

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Pager only modems?
To: david@bcm.tmc.edu (David Smith)
Date: Sun, 6 Apr 1997 13:20:54 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

David Smith wrote:
    
    Anyone tried to use pager only modems (modems that don't support faxing?)
    
    I need to be able to have more paging lines than faxing ones, and already 
    have soem good modems for it, but they don't support faxing.  Has anyone 
    been able to get hulafax to talk to non fax modems?

Any DATA-modem should work if you disable faxgetty(1M) and
do not use the modem with faxsend(1M), e.g. by not directing
real fax jobs to this modem.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Waiting for modem to come ready
To: ameissonnier@dohle.com (Alexandre Meissonnier)
Date: Sun, 6 Apr 1997 13:56:20 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Alexandre Meissonnier wrote:
    
    Hi all,
    
    I'm stuck with my HylaFAX installation on a SCO 5.0.2 machine, using a 
    USR Sportster Voice 33.600 modem.
    
    First, I installed the fax server in send-only mode and it worked fine. 
    Then, I installed a faxgetty to receive faxes, I can't even send anything anymore.
    The faxstat command keeps saying 'Waiting for modem to come ready', and 
    resetting the modem doesn't change this. 
    
    Here is an excerpt of my syslog file:

	...

please show your modem config file also;

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Problems with ZyXel 1496R+ (rack modem)
To: mathias@staff.singnet.com.sg
Date: Sun, 6 Apr 1997 14:02:04 +0200 (MSZ)
Cc: flexfax@sgi.com, cleng@staff.singnet.com.sg
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Mathias Koerber wrote:
    
    Hi all,
    
    I have a problem with a Zyxel 1496R+ Rack mounted modem...
    
    I could compile, install and configure Hylafax fine. It recognises the
    modem, can talk to etc. But when I try to send to my local fax-machine,
    it dials, the fax picks up, but they don't exchange any training signals,
    and hylafax gives up after a while with NO CARRIER.
    
    I can send to the same faxmachine from an older Hylafax installation, which
    uses a standalone Zyxel 1496S modem..
    
    It seems it is either a problem with the cabling (the rackmounted Zyxels
    are connected via loose wires in the back :-(, my modem
    settings  or the firmware version..
    
    Does anyone have any hints for me???
    
    Tia
    Mathias
    
    		...
    	# 
    	ModemResetCmds:         AT&B1&N0&S0*F0S18=2S38.3=1S39=0
    	#
    	ModemDialCmd:           ATDT%s          # no '@' 'cuz then busy not recognized
    		...
    	# cat *13
    	Apr 04 14:16:49.10: [ 9653]: SESSION BEGIN 00000013 654753273
    	Apr 04 14:16:49.10: [ 9653]: SEND FAX: JOB 8 DEST +65.4753273 COMMID 00000013
    	Apr 04 14:16:49.10: [ 9653]: DELAY 2600 ms
    	Apr 04 14:16:51.71: [ 9653]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
    	Apr 04 14:17:23.07: [ 9653]: <-- [17:AT+FLI="SingNet"\r]
    	Apr 04 14:17:23.18: [ 9653]: --> [2:OK]
    	Apr 04 14:17:23.18: [ 9653]: DIAL 4753273@
    	Apr 04 14:17:23.18: [ 9653]: <-- [13:ATDT4753273@\r]
                                                       ^^
	....

How do you dial the "@"?

Try also upping S7 with "ModemWaitTimeCmd:        ATS7=120"

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sun, 06 Apr 1997 12:29:15 -0400
From: Peter Dominguez <peter@pad.com>
Organization: P.A. Dominguez, Inc.
To: hylafax <flexfax@sgi.com>
Subject: faxrcvd and SENDTO variable
Sender: owner-flexfax@celestial.com

#   $Id: faxrcvd.sh,v 1.32 1996/11/15 20:45:07 sam Rel $
is the version of faxrecvd that we use.

I suspect the MIMEBOUNDARY feature is not working 100%.

On the forwarded mail & fax:

The mail header is correct,
the faxinfo information is MISSING
and the postscript fax is correctly attached.

Why is the faxinfo information being passed over.

Thanks,

peter@pad.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sun, 6 Apr 1997 21:10:20 -0400
From: Milind Kamble <kamble@cs.binghamton.edu>
To: flexfax@sgi.com
CC: kamble@sol.co.uk
Subject: Problems with Hylafax 4.0pl0 under aix 3.2.5
Sender: owner-flexfax@celestial.com

Hello,
  I am having trouble starting Hylafax on my aix machine. I apologize if my
problems have already been answered somewhere in the mailing list archive. An
extensive search provided me with no clues, hence I am seeking help here.

First, here's what I did:
  I downloaded and installed the binary distribution
hylafax-aix3.2.5-v4.0pl0.cpio.gz on my machine. The machine is an IBM RS6000
laptop model number N40 and runs aix 3.2.5

  After performing the cpio extraction, I executed the faxsetup and
faxaddmodem scripts and everything was reported to be ok (except warnings
about unavaliabiliy of /bin/vgetty and /bin/egetty programs.

	faxaddmodem was run as "faxaddmodem tty1"
 
Here are the problems that I am having:
  running the command faxmodem tty1 reports that "FIFO: open: No such device
or address"
  
	running "hfaxd -i 4459 -o 4457" seems to have no effect because a ps
listing after that indicates there is no hfaxd process running.

  faxstat command reports "can not reach server at host "localhost", port
4459


  So, overall it seems that I am unable to get the server side software
running at all.

Also I would very much appreciate if anyone could inform me how to associate
faxgetty program with the /dev/tty1 on a permanent basis. On my machine, the
modem is connected and available on /dev/tty1 (and it works, because I use
kermit successfully). Using smit to change the tty program fails because smit
runs the command "chdev -l tty1 /usr/local/sbin/faxgetty" which is an
incorrect syntax to the chdev command.

  If it helps, I would like to inform that before downloading Hylafax, there
was a vendor supplied software called FAXTOOL that had been installed and it
seemed to have been configured to only use /dev/tty1 as it's port. However it
was not working either. So I have been trying to install Hylafax, but so far
no luck.

 Any information and pointers would be highly appreciated.

Thanks in advance.

Milind Kamble
(kamble@cs.binghamton.edu)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Page Width..Still a problem
Date: Sun, 6 Apr 97 23:04:44 -0500
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

A desperate plea...

Can some one please share any thing they've found on the Page width 
problem. I'm running GS 3.33 and I'm getting the 1728/1734 image error 
when sending a legal size document. The best I can figure it's getting 
messed up after the gs conversion since I've even tried the -g1728x2846 
option w/ ghostscript. This seems to be a real problem for many users on 
the list. I've gone throught the archives back to 9/96 and many have 
asked about this but no answers have surfaced. If anyone out there can 
send Legal size documents from a win95 please let me know how your system 
is set up. It might just be the hint I need to solve the problem myself. 
Thanks!!!!
    


Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    32mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs    1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Steve Williams <steve@genie96.com>
Subject: Re: Problems with Hylafax 4.0pl0 under aix 3.2.5
To: kamble@cs.binghamton.edu (Milind Kamble)
Date: Sun, 6 Apr 1997 23:54:39 -0600 (MDT)
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

Howdy,

I am the supplier of the AIX binary.

It looks like you haven't read the INSTALL notes for AIX very carefully.

Also, the web page FAQ probably answers some of your questions.  I will
try to help, but I don't have access to anything, as I am at home right
now.

> Hello,
>   I am having trouble starting Hylafax on my aix machine. I apologize if my
> problems have already been answered somewhere in the mailing list archive. An
> extensive search provided me with no clues, hence I am seeking help here.
> 
> First, here's what I did:
>   I downloaded and installed the binary distribution
> hylafax-aix3.2.5-v4.0pl0.cpio.gz on my machine. The machine is an IBM RS6000
> laptop model number N40 and runs aix 3.2.5
> 
>   After performing the cpio extraction, I executed the faxsetup and
> faxaddmodem scripts and everything was reported to be ok (except warnings
> about unavaliabiliy of /bin/vgetty and /bin/egetty programs.
> 
> 	faxaddmodem was run as "faxaddmodem tty1"
>  
> Here are the problems that I am having:
>   running the command faxmodem tty1 reports that "FIFO: open: No such device
> or address"
>   
> 	running "hfaxd -i 4459 -o 4457" seems to have no effect because a ps
> listing after that indicates there is no hfaxd process running.
> 

You HAVE to get hfaxd running before anything will work.  If you are only
trying to start hfaxd, then THAT IS WRONG.  There is a process called
faxq that has to be started before hfaxd.

>   faxstat command reports "can not reach server at host "localhost", port
> 4459
> 
see above.
> 
>   So, overall it seems that I am unable to get the server side software
> running at all.
> 
> Also I would very much appreciate if anyone could inform me how to associate
> faxgetty program with the /dev/tty1 on a permanent basis. On my machine, the
> modem is connected and available on /dev/tty1 (and it works, because I use
> kermit successfully). Using smit to change the tty program fails because smit
> runs the command "chdev -l tty1 /usr/local/sbin/faxgetty" which is an
> incorrect syntax to the chdev command.
> 

See my INSTALL notes for AIX on how to do this.  It gives the EXACT command 
to use.  it uses the chitab command ( I think that is what it is ).

>   If it helps, I would like to inform that before downloading Hylafax, there
> was a vendor supplied software called FAXTOOL that had been installed and it
> seemed to have been configured to only use /dev/tty1 as it's port. However it
> was not working either. So I have been trying to install Hylafax, but so far
> no luck.
> 
>  Any information and pointers would be highly appreciated.
> 
Here is my the relevant parts from my /etc/rc.local


# /etc/rc.local
# Local startup commands.  This file is executed by /etc/inittab
#
# Created: 	Sun Oct 30 19:07:15 MST 1994, sew
#
# Last updated: Sun Oct 30 21:18:24 MST 1994, sew
#		- to add setrts program call
# 

# Start up the Fax Daemon
# do a ps first, to see if there is one running.  The PS includes
# the PS process, so we need to subtract 1 to get the math correct

num_faxd=`ps -ef | grep faxq | wc -l`
if [ $num_faxd -eq 1 ]; then
	/usr/local/sbin/faxq > /dev/console 2>&1 # start fax 
fi

num_hfaxd=`ps -ef | grep hfaxd | wc -l`
if [ $num_hfaxd -eq 1 ]; then
	/usr/local/sbin/hfaxd -i hylafax -o fax > /dev/console 2>&1 # listen\
fi

# Hack to get faxgetty into inittab
num_faxgetty=`ps -ef | grep faxgetty | wc -l`
if [ $num_faxgetty -eq 1 ]; then
	# the pdisable & chdev is to make sure no-one has played in 
	# smit, not knowing what they are doing.
        pdisable tty1 ; chdev -l tty1 -a login=disable ; sleep 2
	/etc/chitab "tty1:2:respawn:/usr/local/sbin/faxgetty /dev/tty1"
fi
	
-- 
	Steve Williams, Calgary, Alberta, Canada
	Genie Computer Systems Inc.
	steve@genie96.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Alexandre Meissonnier <ameissonnier@dohle.com>
To: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: Re: Waiting for modem to come ready
Date: Mon, 7 Apr 1997 09:58:19 +0200
Sender: owner-flexfax@celestial.com


For those who replied to my query,asking for more information, here is my modem config file.

I start the faxgetty with the following line in my inittab:
fax:234:respawn:/usr/local/HylaFAX-v4.0/slib/faxgetty tty2A

As shown in the log file (previous message), the faxgetty process seems to start up normally. 
Remember that my operating system is not Linux, but SCO 5.0.2.

So here's my config.tty2A file: I copied it from the file spool/config/usr-2.0 in the HylaFAX distribution.

#
# Configuration for using the Class 2.0 command interface
# with a USR v.34 Courier or Sporster modem.
#
# RTS/CTS flow control is used default.
#
#
CountryCode:		49
AreaCode:		2241
FAXNumber:		+49-2241-122-436
LongDistancePrefix:	0,0
InternationalPrefix:	0,00
DialStringRules:	etc/dialrules
ServerTracing:		11
SessionTracing:		11
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		high
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"Testfax"
LogFacility:		local0
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%p of %%t"
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class2.0	# use class 2.0 interface
ModemRate:		38400		# DCE-DTE communication rate
ModemFlowControl:	rtscts		# XON/XOFF flow control assumed
#
ModemNoFlowCmd:		AT&H0&I0&R1	# setup modem for no flow control
ModemHardFlowCmd:	AT&H1&I0&R2	# setup modem for hardware flow control
ModemSoftFlowCmd:	AT&H2&I2&R1	# setup modem for software flow control
#
ModemSetupDTRCmd:	ATS13=1&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemResultCodesCmd:	ATQ0X4		# enable extended result codes
#
# NB: adaptive answer only seems to work properly when
#     the modem is left idling in Class 2.0
#
ModemSetupAACmd:	AT+FAA=1
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
ModemSetVolumeCmd:	"ATM0 ATM1 ATM1 ATM1 ATM1"
#
# Modem does not support HDLC frame tracing; we add this just
# to eliminate spurious ERROR results that confuse the naive.
#
Class2BUGCmd:		AT+FBU=0
#
# The modem doesn't support copy quality checking, even though it
# returns (0-2,0-2) for AT+FCQ=?; therefore we override the query
# response so that the server will do copy quality checking.
#
Class2CQQueryCmd:	!(0),(0)	# override modem response

# Dial command:
ModemDialCmd:		ATX3DT%s

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com
Subject: Re: whfc 
Date: Mon, 07 Apr 1997 10:15:17 +0200
From: STefan Mayer -- SYSTOR AG <mayer.stefan@ch.swissbank.com>
Sender: owner-flexfax@celestial.com

Hello,

I still have no luck with whfc. I can connect and view the queue by hand (with 
telnet) and with other (unix) clients. Also the old winfax client works....

so still any help is welcome,

regards,

	STefan Mayer

> At 18:12 01/04/97 +0200, Stefan Mayer wrote:
> >
> >Hello,
> >
> >I just installed whfc on my workstation and tried to print to a HP UX 
> >Fax-server running hylafax 4.0pl1. If I try to look at the fax queue or send a 
> >fax I always get a error message saying:
> >
> >": command error, expecting command token
> >
> >[snip]
> 
> Hi. 
> 
> I've never seen this error with whfc, so I'm guessing. 
> 
> First of all, when you say 'workstation' you do mean a PC running Windows'95
> or NT ? Second, could you open a DOS window and type the following :
> 
>         c:\windows> telnet derrick 4559
> 
> but instead of 'derrick' put your own server hostname. You should see :
> 
> 220 derrick.elgro.co.uk server (HylaFAX (tm) Version 4.0pl1) ready.
> 
> which shows that the hfaxd server program is running. Type 'quit' to end
> the session. If you don't see the above, refer to 'Troubleshooting.html' 
> from the html docs ( which is where the above test came from ).
> 
> Well, it's a start. Let us know how you got on.
> 
> Cheers,
> Phil Watkinson,
> Boston, UK.
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
X-Authentication-Warning: ayahuasca.ethz.ch: feigin owned process doing -bs
To: flexfax@sgi.com
Subject: Hylafax and SMS in Switzerland ?
Reply-to: "Adam W. Feigin" <awf@iis.ee.ethz.ch>
Organization: Swiss Federal Institute of Technology (ETH), Zurich
X-Copyright: Copyright 1996, Adam W. Feigin.  All rights reserved.
X-Notice: Duplication and redistribution prohibited without consent of
		the author.
Date: Mon, 07 Apr 1997 10:20:44 +0200
From: "Adam W. Feigin" <feigin@iis.ee.ethz.ch>
Sender: owner-flexfax@celestial.com

Is there anybody out there (or should I say here ?) that has
successfully set up Hylafax (V4.0pl1) to work with the Swiss Telecom
PTT SMS message system ? If so, can you tell me what you did to get it
working (perhaps sending your etc/pagermap file) ?

Thanks in advance

							/AWF
------------------------------------------------------------------------------
Internet: awf@iis.ee.ethz.ch				 Adam W. Feigin
UUCP:{backbones}!iis!awf	          Network Systems Manager & CyberShaman
Mail: Integrated Systems Laboratory	      Institute for Integrated Systems
      ETH-Zentrum			  Swiss Federal Institute of Technology
      CH-8092 Zurich		                     Zurich, Switzerland
      Switzerland
Phone: +41 1 632 50 53				FAX: +41 1 632 11 94
			http://www.iis.ee.ethz.ch/~feigin
			
"I'd like to donate my body to science after I die, but I'm afraid its
taken far too much of it already"

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Hylafax and SMS in Switzerland ?
To: awf@iis.ee.ethz.ch
Date: Mon, 7 Apr 1997 13:43:05 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Adam W. Feigin wrote:
    
    Is there anybody out there (or should I say here ?) that has
    successfully set up Hylafax (V4.0pl1) to work with the Swiss Telecom
    PTT SMS message system ? If so, can you tell me what you did to get it
    working (perhaps sending your etc/pagermap file) ?
    
    Thanks in advance

I think the problem could be solved pretty much simple if you
provide a session log of the unsuccessfull connection to
the service provider showing the dial command issued by
pagesend(1M) and the dialog with the remote SMSC.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 07 Apr 1997 15:28:45 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: Uri Shkolnik <uri@harmonic.co.il>
CC: "flexfax@sgi.com" <flexfax@sgi.com>
Subject: Re: whfc
Sender: owner-flexfax@celestial.com

Uri Shkolnik wrote:
> 
> On Tuesday, April 01, 1997 7:12 PM, STefan Mayer -- SYSTOR AG[SMTP:mayer.stefan@ch.swissbank.com] wrote:
> >
> >Hello,
> >
> >I just installed whfc on my workstation and tried to print to a HP UX
> >Fax-server running hylafax 4.0pl1. If I try to look at the fax queue or send a
> >fax I always get a error message saying:
>>
>>": command error, expecting command token
...
> 
> I had the same problems, tried to get help from this mailing list and from the author, but nothing. I'm still using the old winflex.
> I'll glad if you find the answer to this problem and forward it to me.
> 

Hi,

is the new hylafax protocol configured propperly ? If anybody else has
these
problems please send me short description on which server and client
software 
these errors occure, because it runs here (Server Linux 2.0.29, Clients
Win95+NT)
without this problems.

Uli
-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 07 Apr 1997 15:45:06 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: David Hayes <david@bdel.com>
CC: flexfax@sgi.com
Subject: Re: WHFC 0.3a and Win95
Sender: owner-flexfax@celestial.com

David Hayes wrote:
> 
> [ other whfc problems snipped... ]
> 
> Since I upgraded to the newest whfc client a few days ago, all of my
> outgoing faxes are failing with the following messages:
> 
... 
> I switched back to the previous version of whfc, and I can fax fine.  Any
> ideas?
> 
> The server is running RedHat Linux v4.0 with Hylafax-v4.0pl1 and
> Ghostscript 3.33.  The the client is NT Workstation v4.0, MS Word, and the
> QMS-PS 820 v51.7 printer driver, FWIW.
> 
> --david

Hi,

try the HP4/4M Postscript driver and choose in the postscript options
"archive format". If this doesn't help send me a note.

Uli
-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Uri Shkolnik <uri@harmonic.co.il>
To: "'Ulrich Eckhardt'" <uli@rgw-express.de>,
        Uri Shkolnik
	 <uri@harmonic.co.il>
Cc: "flexfax@sgi.com" <flexfax@sgi.com>
Subject: RE: whfc
Date: Mon, 7 Apr 1997 18:44:44 +0300
Sender: owner-flexfax@celestial.com

On Monday, April 07, 1997 4:28 PM, Ulrich Eckhardt[SMTP:uli@rgw-express.de] wrote:
>Uri Shkolnik wrote:
>> 
>> On Tuesday, April 01, 1997 7:12 PM, STefan Mayer -- SYSTOR AG[SMTP:mayer.stefan@ch.swissbank.com] wrote:
>> >
>> >Hello,
>> >
>> >I just installed whfc on my workstation and tried to print to a HP UX
>> >Fax-server running hylafax 4.0pl1. If I try to look at the fax queue or send a
>> >fax I always get a error message saying:
>>>
>>>": command error, expecting command token
>...
>> 
>> I had the same problems, tried to get help from this mailing list and from the author, but nothing. I'm still using the old winflex.
>> I'll glad if you find the answer to this problem and forward it to me.
>> 
>
>Hi,
>
>is the new hylafax protocol configured propperly ? If anybody else has
>these
>problems please send me short description on which server and client
>software 
>these errors occure, because it runs here (Server Linux 2.0.29, Clients
>Win95+NT)
>without this problems.
>
>Uli
>-- 
>Ulrich Eckhardt		                   mailto:uli@rgw-express.de
>http://people.frankfurt.netsurf.de/uli
>Truly great madness can not be achieved without significant
>intelligence. (Henrik Tikkanen)
>
>

It's simply doesn't work.

I keep trying (from version 0.1 ...)

The winflex works fine. I simply don't no what is wrong.



Uri Shkolnik - System Administrator
Harmonic Lightwaves (Israel)
Email: uri@harmonic.co.il
Tel: (972) 6 6230150 (Ext 122)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Re: Page Width..Still a problem
Date: Tue, 8 Apr 97 00:22:44 -0500
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

OK so no one has an answer. How about this? Can anyone tell me where and 
how the "DEVICES" get added to GS. I think it's a GS problem, well 
actually a driver problem, maybe. What really confuses me is that it 
works fine in Letter mode but not in Legal mode.

Try this and see if it doesn't seem strange. Using win95 and the Apple 
Laser Writer driver, create the postscript file. Try to fax it, 
Nope...You get the image size error of 1728 vs 1734. Now take the same 
file and search it for a line that says *PageSize, right below it you 
will see legal. Casually change that to say letter. Don't worry about 
*PageSize US Legal just above it, just change the line that says legal to 
letter. Now send it to the fax again and Voala!!! It faxes almost 
perfectly. Mine seem to loose the top 2.5" but they go throught none the 
less, __NO___ image size errors. Hints, hints, hints, if everyone will 
put a cent or 2 in I'll bet we can solve this. 

The sendfax syntax I use in the test:
sendfax -n -d 1234123 doc1.ps

By the way, just in case anyone out there has missed it. Most commercial 
fax programs I've looked at won't send legal sheets, just think of the 
market potential for alot of computer nuts like ourselves to make a few 
extra bucks to help pay for that 4 processor smokin' machines we've all 
dreamed of for a home computer :)


Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    32mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs    1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Waiting for modem to come ready
To: ameissonnier@dohle.com (Alexandre Meissonnier)
Date: Tue, 8 Apr 1997 08:13:08 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Alexandre Meissonnier wrote:
    
    
    For those who replied to my query,asking for more information,
    here is my modem config file.
    
    I start the faxgetty with the following line in my inittab:
    fax:234:respawn:/usr/local/HylaFAX-v4.0/slib/faxgetty tty2A
    
    As shown in the log file (previous message), the faxgetty
    process seems to start up normally. 
    Remember that my operating system is not Linux, but SCO 5.0.2.
    
    So here's my config.tty2A file: I copied it from the file
    spool/config/usr-2.0 in the HylaFAX distribution.

Did you run faxsetup(1M) or faxaddmodem(1M) for this modem?
Why do you *copied* it from the spool/config?
    
    #
    # Configuration for using the Class 2.0 command interface
    # with a USR v.34 Courier or Sporster modem.

	<...deleted, nothing unusual to mention ...>

Please enable the tracing level for the FIFO messages passed
between the daemons and show the same situation as in your
first mail, e.g. one faxgetty(1M) initialization and one
faxsend(1M) after "running and idle". Please show your full
/etc/inittab. Are there "off" lines for the label "fax" or
other lines for /dev/tty2A or /dev/tty2a?

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 08 Apr 1997 11:00:46 +0300
From: Uri Shkolnik <uri@harmonic.co.il>
Reply-To: uri@harmonic.co.il
To: flexfax@sgi.com
Subject: "Client does not support document page width"
Sender: owner-flexfax@celestial.com

Hi,

I have problems with sending faxes.
Here is the log: (part of it)
=============================
Apr 07 20:26:12.01: [18229]: --> [2:OK]
Apr 07 20:26:12.01: [18229]: SEND send MPS (more pages, same document)
Apr 07 20:26:12.01: [18229]: <-- [9:AT+FET=0\r]
Apr 07 20:26:22.78: [18229]: --> [7:+FPTS:1]
Apr 07 20:26:22.78: [18229]: --> [2:OK]
Apr 07 20:26:22.78: [18229]: SEND recv MCF (message confirmation)
Apr 07 20:26:22.79: [18229]: SEND FAX (00002624): FROM
uri@harmonic.co.il TO 623
0155 (page 3 of 4 sent in 1:12)
Apr 07 20:26:22.79: [18229]: SEND FAX (00002624): FROM
uri@harmonic.co.il TO 623
0155 (docq/doc78.cover;01 sent in 1:12)
Apr 07 20:26:22.85: [18229]: SEND file "docq/doc87.ps;01"
Apr 07 20:26:22.85: [18229]: Client does not support document page
width, max re
mote page width 1728 pixels, image width 1734 pixels
Apr 07 20:26:22.85: [18229]: <-- [5:ATH0\r]
Apr 07 20:26:24.53: [18229]: --> [7:+FHNG:2]
Apr 07 20:26:24.53: [18229]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (co
de 2)
Apr 07 20:26:25.09: [18229]: --> [2:OK]
Apr 07 20:26:25.15: [18229]: SESSION END

==============================

Any ideas ?


-- 
***************************************
* Uri Shkolnik - System Administrator *
* Harmonic Lightwaves  (Israel)       *
* Email: uri@harmonic.co.il           *
* Tel: (972) 6 6230150  Fax: ~6230151 *
***************************************

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com, sam@engr.sgi.com, Matthias.Apitz@softcon.de
Subject: 2 features needed with Hylafax 4.0pl1
X-Face: '%)H7X3>"mU[aaPz3aZ`^e{*DV1&W;+P-Wx*Yk)Ah[e(-AO&EB\D.gq2y{kH73Q29}_A4H,eykdf!9dj[m\gwFgZOTt?=7gI+RBN,I({A32-MyZrmtrD%8*L/boGS0,+Lj$H|@
X-Url: http://www.francenet.fr/
Date: Tue, 08 Apr 1997 13:08:50 +0200
From: Gildas Perrot <perrot@francenet.fr>
Sender: owner-flexfax@celestial.com

Hi,

I don't think those 2 things are possible with Hylafax 4.0pl1 :

1) use faxrm to remove jobs owned by someone else even if I am root. For the 
moment, I need to telnet to hylafax port.

2) EASILY reuse jobs which failed and which documents are in docq. For the 
moment, I need to use sendfax -d <fax number> <document in docq> for each jobs 
failed and furthermore I need to know the fax number.

3) for the moment, documents of succeeded and failed jobs are kept in a same 
directory, docq. It would be great to separate those 2 kinds of documents in 
order to be able to kept for several days documents not sent to resend them 
without having a huge docq directory containing also documents sent.

It would be great to have those 2 features added in hylafax but I have no time 
and enough experience with Hylafax to do that.

Thanks in advance.		Gildas.
-- 
Gildas PERROT, perrot@francenet.fr         __o
FranceNet, 28 rue Desaix, 75015 Paris ---_ \<,_
http://www.francenet.fr            ---- (_)/ (_)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com
Subject: Modem timeout after some days with Hylafax 4.0pl1
X-Face: '%)H7X3>"mU[aaPz3aZ`^e{*DV1&W;+P-Wx*Yk)Ah[e(-AO&EB\D.gq2y{kH73Q29}_A4H,eykdf!9dj[m\gwFgZOTt?=7gI+RBN,I({A32-MyZrmtrD%8*L/boGS0,+Lj$H|@
X-Url: http://www.francenet.fr/
Date: Tue, 08 Apr 1997 13:16:09 +0200
From: Gildas Perrot <perrot@francenet.fr>
Sender: owner-flexfax@celestial.com

Hi everybody,

After some days, my modem (USR-Robotics Courier Dual Standard) is no more able 
to send fax with Hylafax 4.0pl1 and power off/on is enough to solve the 
problem.
The error message is :

MODEM <Timeout> after ATH0 (see below) :

Apr 05 03:56:35.82: [23852]: DELAY 2600 ms
Apr 05 03:56:38.42: [23852]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr 05 03:56:38.59: [23852]: --> [16:ATE0V1Q0X4S0=0H0]
Apr 05 03:56:38.59: [23852]: --> [2:OK]
Apr 05 03:56:38.59: [23852]: <-- [32:ATS8=2S7=60&H2&I2&R1S13=1&D2&C1\r]
Apr 05 03:56:38.76: [23852]: --> [2:OK]
Apr 05 03:56:38.76: [23852]: <-- [14:AT+FCLASS=2.0\r]
Apr 05 03:56:38.80: [23852]: --> [2:OK]
Apr 05 03:56:38.80: [23852]: <-- [9:AT+FLO=1\r]
Apr 05 03:56:38.84: [23852]: --> [2:OK]
Apr 05 03:56:38.84: [23852]: <-- [9:AT+FPP=0\r]
Apr 05 03:56:38.88: [23852]: --> [2:OK]
Apr 05 03:56:38.88: [23852]: <-- [9:AT+FBO=0\r]
Apr 05 03:56:38.92: [23852]: --> [2:OK]
Apr 05 03:56:38.92: [23852]: <-- [10:AT+FCT=30\r]
Apr 05 03:56:38.96: [23852]: --> [2:OK]
Apr 05 03:56:38.96: [23852]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 05 03:56:39.00: [23852]: --> [2:OK]
Apr 05 03:56:39.00: [23852]: <-- [9:AT+FIE=0\r]
Apr 05 03:56:39.04: [23852]: --> [2:OK]
Apr 05 03:56:Apr 05 03:56:39.09: [23852]: --> [2:OK]
Apr 05 03:56:39.09: [23852]: <-- [5:ATM0\r]
Apr 05 03:56:39.25: [23852]: --> [2:OK]
Apr 05 03:56:39.32: [23852]: <-- [14:AT+FCLASS=2.0\r]
Apr 05 03:56:39.45: [23852]: --> [2:OK]
Apr 05 03:56:39.45: [23852]: <-- [9:AT+FLO=1\r]
Apr 05 03:56:39.59: [23852]: --> [2:OK]
Apr 05 03:56:39.59: [23852]: <-- [9:AT+FPP=0\r]
Apr 05 03:56:39.73: [23852]: --> [2:OK]
Apr 05 03:56:39.73: [23852]: <-- [9:AT+FBO=0\r]
Apr 05 03:56:39.87: [23852]: --> [2:OK]
Apr 05 03:56:39.87: [23852]: <-- [10:AT+FCT=30\r]
Apr 05 03:56:40.01: [23852]: --> [2:OK]
Apr 05 03:56:40.01: [23852]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 05 03:56:40.15: [23852]: --> [2:OK]
Apr 05 03:56:40.15: [23852]: <-- [9:AT+FIE=0\r]
Apr 05 03:56:40.29: [23852]: --> [2:OK]
Apr 05 03:56:40.29: [23852]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 05 03:56:40.43: [23852]: --> [2:OK]
Apr 05 03:56:40.43: [23852]: <-- [22:AT+FLI="NothingSetup"\r]
Apr 05 03:56:40.57: [23852]: --> [2:OK]
Apr 05 03:56:40.58: [23852]: DIAL phone-number#
Apr 05 03:56:40.58: [23852]: <-- [35:ATDTphone-number#\r]
Apr 05 03:56:40.86: [23852]: --> [5:ERROR]
Apr 05 03:56:40.86: [23852]: SEND FAILED: Invalid dialing command
Apr 05 03:56:40.87: [23852]: SEND FAILED: Invalid dialing command; too many 
attempts to dial
Apr 05 03:56:40.87: [23852]: <-- [5:ATH0\r]
Apr 05 03:56:45.86: [23852]: MODEM <Timeout>
Apr 05 03:56:45.88: [23852]: SESSION END

Any idea about that problem ?
-- 
Gildas PERROT, perrot@francenet.fr         __o
FranceNet, 28 rue Desaix, 75015 Paris ---_ \<,_
http://www.francenet.fr            ---- (_)/ (_)



-- 
Gildas PERROT, perrot@francenet.fr         __o
FranceNet, 28 rue Desaix, 75015 Paris ---_ \<,_
http://www.francenet.fr            ---- (_)/ (_)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: 2 features needed with Hylafax 4.0pl1
To: perrot@francenet.fr (Gildas Perrot)
Date: Tue, 8 Apr 1997 13:29:11 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Gildas Perrot wrote:
    
    Hi,
    
    I don't think those 2 things are possible with Hylafax 4.0pl1 :
    
    1) use faxrm to remove jobs owned by someone else even if I am root. For the 
    moment, I need to telnet to hylafax port.

that's right;
    
    2) EASILY reuse jobs which failed and which documents are in docq. For the 
    moment, I need to use sendfax -d <fax number> <document in docq> for each jobs 
    failed and furthermore I need to know the fax number.

that's right again; you could reuse the information from the
notify e-mail in this case;

the existing new client/server protocol (see hfaxd(1M)) has all
needed features to build clients which can reuse existing and/or
failed jobs and documents;
    
    3) for the moment, documents of succeeded and failed jobs are kept in a same 
    directory, docq. It would be great to separate those 2 kinds of documents in 
    order to be able to kept for several days documents not sent to resend them 
    without having a huge docq directory containing also documents sent.
    
    It would be great to have those 2 features added in hylafax but I have no time 
    and enough experience with Hylafax to do that.

there are hooks for this in the existing software (e.g. you could
move things to right places in the notify(1M) script);

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 8 Apr 1997 08:42:04 -0400
To: Brian Walters <macbnr@saratoga.compassnet.com>
From: Vini Myles <vini@visuals.com>
Subject: Re: Page Width..Still a problem
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

>OK so no one has an answer. How about this? Can anyone tell me where and
>how the "DEVICES" get added to GS. I think it's a GS problem, well
>actually a driver problem, maybe. What really confuses me is that it
>works fine in Letter mode but not in Legal mode.
>

>Brian Walters<------------------------------------>macbnr@compassnet.com
>      "How many computers can one have before they become obsessed???"

I'll attempt to take a shot at this.

I've had problems similar to yours. Some of the programs we use here define
page sizes in a way that confuses Ghostscript. ie: A landscape 8.5x11 page
is seen by GS as a portrait 11x8.5 page. Needless to say HylaFax complains
about this. After studying the GS manual which I got from
http://www.cs.wisc.edu/~ghost/index.html I added the command -dFIXEDMEDIA
to the GS command line and pages are rotated as needed and fax properly.
The manual says that it will rotate or scale to automatically to fit the
requested page size.

The script ps2fax.gs (which is a link to ps2fax) is where the GS command
line is assembled. I simply inserted the command into the script. I have
not had any problems since doing this. Everything we fax is generated on
Macs using the Adobe LaserWriter driver. This is also where the device is
specified; -sDEVICE=$DEVICE (which is tiffg3 in this case).

I'm running HylaFax 4.0pl1 on Slackware Linux, kernel 2.0.29, Ghostscript 4.03.

You also might want to look at the PPD on the client machine and see how it
defines the imageable area of legal as oposed to letter. They should be the
same but I've seen stranger things in PPD files. You also could redifine
the page as being slightly smaller here, though this could cause problems
if you use the same driver for printing.

Hope this helps.

Vini Myles

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: HylaFaxV4.0pl1 on UnixWare 2.XX
To: william@irs.tatung.com.tw
Date: Tue, 8 Apr 1997 17:04:14 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

william@irs.tatung.com.tw wrote:
    
    It seems that HylaFaxV4.0pl1 can not work correctly in UnixWare 2.XX ?
    Does anyone try it ok ?

It SEEMS -- what does this mean exactly? For me it worked
on:

$ uname -a
UNIX_SV gide 4.2MP 2.01 i386 x86at
$ 

and also on a customers UnixWare 2.x.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 8 Apr 1997 11:16:57 -0400 (EDT)
From: Marty Kirkman <jkirkman@spyder.net>
To: flexfax@sgi.com
Subject: Abnormal Job Terminations!
Sender: owner-flexfax@celestial.com

Everyone,

   I have run into a problem that I'm hoping can be fixed by a
configuration change. If a fax machine that I am sending to runs out of
paper after the fax has started but before it has finished the fax job on
my end aborts as a failed fax. Is there any way to make the fax retry
sending at some later time from the page that it was doing when the
receiving fax ran out of paper. I can resend the entire document, but some
of my documents are 30 plus pages and they stop on the last page. There is
no reason to resend the pages that have already been sent! Thanks in
advance for any and all help. I am including the logtrace incase that will
help. The NAK with operator interventaion was the fax machine running out
of paper!

---->>>> snip
Apr 08 08:54:22.21: [25814]: SEND FAX (00000834): FROM
carsons@server.carsonsofhp.com TO 18474324447 (page 5 of 7 sent in 0:38)
Apr 08 08:54:22.21: [25814]: USE page width 1728 pixels in 215 mm
Apr 08 08:54:22.21: [25814]: USE unlimited page length 
Apr 08 08:54:22.21: [25814]: USE 3.85 line/mm
Apr 08 08:54:22.21: [25814]: USE 1-D MR
Apr 08 08:54:22.21: [25814]: <-- [7:AT+FDT\r]
Apr 08 08:54:22.45: [25814]: --> [7:CONNECT]
Apr 08 08:54:22.45: [25814]: SEND wait for XON
Apr 08 08:54:22.45: [25814]: --> [1:]
Apr 08 08:54:22.45: [25814]: SEND begin page
Apr 08 08:54:46.34: [25814]: SENT 17544 bytes of data
Apr 08 08:54:47.52: [25814]: SEND end page
Apr 08 08:54:50.70: [25814]: --> [2:OK]
Apr 08 08:54:50.70: [25814]: SEND send MPS (more pages, same document)
Apr 08 08:54:50.70: [25814]: <-- [9:AT+FET=0\r]
Apr 08 08:55:00.13: [25814]: --> [7:+FPTS:4]
Apr 08 08:55:00.13: [25814]: --> [2:OK]
Apr 08 08:55:00.13: [25814]: SEND recv PIN (procedural interrupt negative)
Apr 08 08:55:00.13: [25814]: <-- [6:AT+FK\r]
Apr 08 08:55:01.73: [25814]: --> [7:+FHNG:2]
Apr 08 08:55:01.73: [25814]: REMOTE HANGUP: Call aborted,  from +FK or
<CAN> (code 2)
Apr 08 08:55:02.41: [25814]: --> [2:OK]
Apr 08 08:55:02.41: [25814]: <-- [5:ATH0\r]
Apr 08 08:55:02.65: [25814]: --> [2:OK]
Apr 08 08:55:02.77: [25814]: SESSION END

    ---- Unsent job status ----

   Destination: 18474324447
         JobID: 1816
       GroupID: 1816
        Sender: carsons
      Mailaddr: carsons@server.carsonsofhp.com
        CommID: 00000834
Submitted From: localhost
    Page Width: 215 (mm)
   Page Length: 279 (mm)
    Resolution: 98 (lpi)
        Status: Unable to transmit page (NAK with operator intervention)
       Dialogs: 1 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 1 (total phone calls placed)
         Pages: 5 (pages transmitted)
      TotPages: 7 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)



Marty

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Modem timeout after some days with Hylafax 4.0pl1
To: perrot@francenet.fr (Gildas Perrot)
Date: Tue, 8 Apr 1997 17:41:20 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Gildas Perrot wrote:
    
    Hi everybody,
    
    After some days, my modem (USR-Robotics Courier Dual Standard) is no more=
     able =
    
    to send fax with Hylafax 4.0pl1 and power off/on is enough to solve the =
    
    problem.
    The error message is :
    
    MODEM <Timeout> after ATH0 (see below) :
    
    Apr 05 03:56:35.82: [23852]: DELAY 2600 ms
    Apr 05 03:56:38.42: [23852]: <-- [17:ATE0V1Q0X4S0=3D0H0\r]
    Apr 05 03:56:38.59: [23852]: --> [16:ATE0V1Q0X4S0=3D0H0]
    Apr 05 03:56:38.59: [23852]: --> [2:OK]
    Apr 05 03:56:38.59: [23852]: <-- [32:ATS8=3D2S7=3D60&H2&I2&R1S13=3D1&D2&C=
    1\r]
    Apr 05 03:56:38.76: [23852]: --> [2:OK]
    Apr 05 03:56:38.76: [23852]: <-- [14:AT+FCLASS=3D2.0\r]
    Apr 05 03:56:38.80: [23852]: --> [2:OK]
    Apr 05 03:56:38.80: [23852]: <-- [9:AT+FLO=3D1\r]
    Apr 05 03:56:38.84: [23852]: --> [2:OK]
    Apr 05 03:56:38.84: [23852]: <-- [9:AT+FPP=3D0\r]
    Apr 05 03:56:38.88: [23852]: --> [2:OK]
    Apr 05 03:56:38.88: [23852]: <-- [9:AT+FBO=3D0\r]
    Apr 05 03:56:38.92: [23852]: --> [2:OK]
    Apr 05 03:56:38.92: [23852]: <-- [10:AT+FCT=3D30\r]
    Apr 05 03:56:38.96: [23852]: --> [2:OK]
    Apr 05 03:56:38.96: [23852]: <-- [15:AT+FNR=3D1,1,1,1\r]
    Apr 05 03:56:39.00: [23852]: --> [2:OK]
    Apr 05 03:56:39.00: [23852]: <-- [9:AT+FIE=3D0\r]
    Apr 05 03:56:39.04: [23852]: --> [2:OK]
    Apr 05 03:56:Apr 05 03:56:39.09: [23852]: --> [2:OK]
    Apr 05 03:56:39.09: [23852]: <-- [5:ATM0\r]
    Apr 05 03:56:39.25: [23852]: --> [2:OK]
    Apr 05 03:56:39.32: [23852]: <-- [14:AT+FCLASS=3D2.0\r]
    Apr 05 03:56:39.45: [23852]: --> [2:OK]
    Apr 05 03:56:39.45: [23852]: <-- [9:AT+FLO=3D1\r]
    Apr 05 03:56:39.59: [23852]: --> [2:OK]
    Apr 05 03:56:39.59: [23852]: <-- [9:AT+FPP=3D0\r]
    Apr 05 03:56:39.73: [23852]: --> [2:OK]
    Apr 05 03:56:39.73: [23852]: <-- [9:AT+FBO=3D0\r]
    Apr 05 03:56:39.87: [23852]: --> [2:OK]
    Apr 05 03:56:39.87: [23852]: <-- [10:AT+FCT=3D30\r]
    Apr 05 03:56:40.01: [23852]: --> [2:OK]
    Apr 05 03:56:40.01: [23852]: <-- [15:AT+FNR=3D1,1,1,1\r]
    Apr 05 03:56:40.15: [23852]: --> [2:OK]
    Apr 05 03:56:40.15: [23852]: <-- [9:AT+FIE=3D0\r]
    Apr 05 03:56:40.29: [23852]: --> [2:OK]
    Apr 05 03:56:40.29: [23852]: <-- [23:AT+FCC=3D1,5,2,2,0,0,0,0\r]
    Apr 05 03:56:40.43: [23852]: --> [2:OK]
    Apr 05 03:56:40.43: [23852]: <-- [22:AT+FLI=3D"NothingSetup"\r]
    Apr 05 03:56:40.57: [23852]: --> [2:OK]
    Apr 05 03:56:40.58: [23852]: DIAL phone-number#
    Apr 05 03:56:40.58: [23852]: <-- [35:ATDTphone-number#\r]
    Apr 05 03:56:40.86: [23852]: --> [5:ERROR]
    Apr 05 03:56:40.86: [23852]: SEND FAILED: Invalid dialing command
    Apr 05 03:56:40.87: [23852]: SEND FAILED: Invalid dialing command; too ma=
    ny =
    
    attempts to dial
    Apr 05 03:56:40.87: [23852]: <-- [5:ATH0\r]
    Apr 05 03:56:45.86: [23852]: MODEM <Timeout>
    Apr 05 03:56:45.88: [23852]: SESSION END
    
    Any idea about that problem ?

please show the exact dial command (replacing every digit with "0");

some modems have also a feature (I call it a bug) for the local PTT
that stops dialing after some (say three or five) BUSY attempts; this
"feature" is know as "BLACKLISTED" response from the modem;

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: william@irs.tatung.com.tw
To: flexfax@sgi.com
Date: Tue, 8 Apr 1997 16:49 TWN
Subject: HylaFaxV4.0pl1 on UnixWare 2.XX
Sender: owner-flexfax@celestial.com

It seems that HylaFaxV4.0pl1 can not work correctly in UnixWare 2.XX ?
Does anyone try it ok ?

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 8 Apr 1997 09:53:04 -0700 (PDT)
From: Tim Rice <tim@trr.metro.NET>
To: william@irs.tatung.com.tw
cc: flexfax@sgi.com
Subject: Re: HylaFaxV4.0pl1 on UnixWare 2.XX
Sender: owner-flexfax@celestial.com


On Tue, 8 Apr 1997 william@irs.tatung.com.tw wrote:

> It seems that HylaFaxV4.0pl1 can not work correctly in UnixWare 2.XX ?
> Does anyone try it ok ?
> 

It works fine for me on UnixWare 2.03 and 2.1.1.

What kind of trouble are you having? Compiling? Running?

BTW. There is a SVR4 binary on ftp.sgi.com

--
Tim Rice			Multitalents	(707) 887-1469 (voice)
tim@trr.metro.net

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: David Dawes <dawes@rf900.physics.usyd.edu.au>
Subject: Modem Recommendation
To: flexfax@sgi.com
Date: Wed, 9 Apr 1997 12:50:06 +1000 (EST)
Sender: owner-flexfax@celestial.com

I was wondering if any of the Australians on this list could recommend
a locally available fax modem known to work well with HylaFAX 4.0pl1.

Alternatively is the information from the "user survey" forms available
somewhere?

David

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Taehwan Weon <weon@solvit.co.kr>
To: "'FlexFax'" <flexfax@sgi.com>
Cc: "'weon@cosmos.kaist.ac.kr'" <weon@cosmos.kaist.ac.kr>
Subject: [Q] Current status of HylaFax Commercialization
Date: Wed, 9 Apr 1997 12:20:58 +0900
Sender: owner-flexfax@celestial.com

Hi,

While reading mails from flex-fax mailing list, 
I am wondering if there is any company commercializing the HylaFax
package for UNIX, Win NT, etc.
I think HylaFax is very powerful in that it is developed in
a modularized manner and can be easily integrated to other 
applications.

We were succeeded in integrating it with Oracle database and WWW.
We are interested in commercializing the product. Who in Internet is also
interested in such a work ?


------------------------------------------------------------------
Taehwan Weon			E-mail: weon@cosmos.kaist.ac.kr
Director of R&D,			234-4 Gueui-dong Kwangjin-gu
DigitalWave, Inc.			Seoul, Korea

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Problems installing modem with faxaddmodem
To: ales.tancer@uni-mb.si
Date: Wed, 9 Apr 1997 07:35:23 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Ales Tancer wrote:
    
    HI!
    
    	My name is Ales and i'm new with HylaFax. I have a problem with
    installing fax device for use in HylaFax. I've got source code of
    HylaFax v4.0p11alpha022. I compiled it under Linux (RedHat 4.0 -
    Colgate). There are two modems in my computer. First one is USRobotics
    Sporster 28.8K (internal) and some kind of ISDN modem. ISDN modem is not
    important in this case, because i want to use HylaFax with USR. Whole
    instalation went smooth only there was a problem when HylaFax should
    create a user acc named fax. So i created it my self and run faxsetup

You have to make sure that the user "fax" has the same uid as
the user "uucp".

    again. The modem is on COM3 - ttyS2. So i simply typed ttyS2 and all the
    stuff that is needed to setup modem. Faxaddmodem checks speed of modem
    and it stops at 19200. But after choosing speed i get messege "Modem is
    not responding....". Modem is not on a direct line, but on a phone
    central so i must first dial 9 to get a dial tone and then rest of
    numbers. I thought that faxaddmodem is checking for dial tone and i
    don't know where to tell him to dial 9 and then check for a dial tone.

faxaddmodem(1M) has nothing to do with your PBX. It even works if
the modem is not connected to a phone line. Read the troble-shooting
section of the source html files or the FAQ at
http://www.vix.com/hylafax/FAQ to learn what's to do to solve your
problem.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 9 Apr 1997 10:53:06 +0200 (EETDST)
From: Emre Sezginer <emre@knidos.cc.metu.edu.tr>
Reply-To: Emre Sezginer <emre@knidos.cc.metu.edu.tr>
To: flexfax@sgi.com
Subject: Re: Problems installing modem with faxaddmodem
Sender: owner-flexfax@celestial.com

On Tue, 8 Apr 1997, Ales Tancer wrote:

> HI!
> 
> 	My name is Ales and i'm new with HylaFax. I have a problem with
> installing fax device for use in HylaFax. I've got source code of
> HylaFax v4.0p11alpha022. I compiled it under Linux (RedHat 4.0 -
> Colgate). There are two modems in my computer. First one is USRobotics
> Sporster 28.8K (internal) and some kind of ISDN modem. ISDN modem is not
> important in this case, because i want to use HylaFax with USR. Whole
> instalation went smooth only there was a problem when HylaFax should
> create a user acc named fax. So i created it my self and run faxsetup
> again. The modem is on COM3 - ttyS2. So i simply typed ttyS2 and all the
> stuff that is needed to setup modem. Faxaddmodem checks speed of modem
> and it stops at 19200. But after choosing speed i get messege "Modem is
> not responding....". Modem is not on a direct line, but on a phone

In that case "Modem is not responding..." means that software is not
recieving feedback for the "AT" commands it has sent. There is no line
test at that stage as far as I know.

Modems on COM3 often cause hardware conflicts with COM1 since they share
the same hardware IRQ. You may try one of these:

* Disable COM1 from the bios setup - if the port is on board - else with
the jumpers on the I/O card.

* Disable both COM1 and COM3 as described above and set your internal USR
modem to COM1.

* Configure your internal modem to use an IRQ other than 3 or 4 (using
IRQ 5, 7 or 9 may be a good idea), then configure your rc.serial for the
new IRQ setting.

Re-run faxsetup.

Good luck.

Emre Sezginer
METU Computer Center

> central so i must first dial 9 to get a dial tone and then rest of
> numbers. I thought that faxaddmodem is checking for dial tone and i
> don't know where to tell him to dial 9 and then check for a dial tone.
> 
> 	Thank you all in advance,
> 				  Ales
> -- 
> +-------------------------+--------------------------------------------+
> | Ales Tancer,            | E-Mail   : ales.tancer@uni-mb.si           |
> | University of Maribor,  | Homepage : http://tferi3.uni-mb.si/~tancer |
> | Faculty of EE and CS,   | Phone    : ++386 62 662 168                |
> | Maribor, Slovenia.      | Fax      : ++386 62 661 468                |
> +-------------------------+--------------------------------------------+
> 
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: HylaFaxV4.0pl1 on UnixWare 2.XX
To: william@irs.tatung.com.tw
Date: Wed, 9 Apr 1997 11:06:15 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

william@irs.tatung.com.tw wrote:
    
    	<...logs deleted....>
    
    when i use ModemRate as default(38400), the result is worse.
    i had been tried SVR4 binary from ftp.sgi.com, the result was the same.
    
    According to my testing cases, the more lines to transmit the result is worse.
    the higher ModemRate the worse result. 
    So i suspect that the problem is "tty". the tty is unstable. 
    
    Please give me some suggestion about this problem ?

Normaly on UnixWare /dev/tty00 is the same major/minor as
/dev/tty00s which means software handshake in the driver:

$ ls -l /dev/tty00*
crw-rw-rw-    1 root     root       3,  0 Nov 29  1995 /dev/tty00
crw-rw-rw-    1 root     root       3,  1 Nov 29  1995 /dev/tty00h
crw-rw-rw-    1 root     root       3,  0 Nov 29  1995 /dev/tty00s
$ 

You can't use /dev/tty00 or /dev/tty00s with rtscts flow and reliable
with high speed.

Try using the /dev/tty00h port and use rtscts if the modem
supports it. Hope that helps.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com
Date: Wed, 9 Apr 1997 08:42:17 EDT
Subject: No cover page
From: charles.stuart@juno.com (Charles G Stuart)
Sender: owner-flexfax@celestial.com

Greetings.

	I have just installed Hylafax v4.0pl1 on two Linux boxes, running
kernel v2.0.18 and v2.0.27.  The tiff libraries were compiled, installed,
and verified prior to the  Hylafax installation.  Ghostscript is also
installed and functional.

	The problem I'm having is that neither machine generates cover
sheets for the faxes, whether I send them direct from the command line or
indirectly from the Whfc or winflex clients.  One of the installations,
on kernel v2.0.27, simply ignores the cover page conversion - other faxes
are converted and sent without incident.  The other installation ignores
the cover page when faxes are sent from the Windoze clients.  It attempts
to send cover pages when run from the command line, with mixed success: 
usually, the format conversion will fail.  If I use sendfax to send the
cover page file, the conversion works properly.

	I've been through the documentation several times, as well as
doing extensive searches in the mail archive - I'm stumped.  Does anyone
out there have any ideas?

				Chuck Stuart
				charles.stuart@juno.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Re: Page Width..Still a problem
Date: Wed, 9 Apr 97 12:45:14 -0500
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

>    Brian> A desperate plea...  Can some one please share any thing
>    Brian> they've found on the Page width problem. I'm running GS
>    Brian> 3.33 and I'm getting the 1728/1734 image error when sending
>
>    
>The trick is to not send a Legal size document! If you set the page
>size to A4, then it should work fine. Of course this may mean you have
>to re-format the doc :( 
>
>If there is a better way, I'd like to know too.

BULL HOCKEY!!! I've found the answer and would like to share it with the 
group. I'm now using Alladin's GS 4.03 and simply setting 
-sPAPERSIZE=legal in the ps2fax script. That's it folks. I need to work 
on a script to dynamically change this between legal and letter, I don't 
care about that right now. My client will be happy and I'm closer to 
getting that smokin' 4 proccessor server for "home enjoyment"

On a side note. I may be releasing Win95 fax client to the group soon, 
but I could use a little help from a sharp Windoze programmer on printer 
ports. 

Share your knowledge! Everyone learns that way.



Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    32mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs    1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 9 Apr 1997 20:13:57 +0200 (MET DST)
From: Kai Michael Kretschmann <kai@kmk.rhein-main.de>
To: flexfax@sgi.com
Subject: fax polling
X-Pgp-Keyid: 1024/3BDCBF15
X-Pgp-Fingerprint: 07 F0 BF 7A 57 55 FE B4  09 C5 A5 0E D0 44 EA 20
Sender: owner-flexfax@celestial.com

Hi there,

normal fax sending/receiving works very well, but polling doesn't.
If I submit a job via "sendfax -p -d 06155660915" I get this
faxstat output:

HylaFAX scheduler on fix.kmk.rhein-main.de: Running
Modem ttyS9 (+49.6172.767944): Running and idle
Modem ttyS3 (+49.6172.767944): Running and idle

JID  Pri S  Owner Number       Pages Dials     TTS Status
16   127 W    kai 06155660915   0:0   0:12

The modem never dials or even tries to. What I'm missing?

Kai Kretschmann,
  >>>   FidoNet:  2:2461/312, 21:491/2161   <<<
  >>>   Internet: kai@kmk.rhein-main.de     <<<
  >>>   FAX/BBS:  +49-6172-767944           <<<

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Jacek Badziak <Jacek.Badziak@students.mimuw.edu.pl>
Date: Wed, 9 Apr 1997 20:16:49 +0200 (MET DST)
To: flexfax@sgi.com
Subject: hylafax html/java client ?
Sender: owner-flexfax@celestial.com

Hi folks,

	Is there any html or java client to Hylafax software 
that alows browsing incoming faxes via WWW browser ?

BEST REGARDS
J.Badziak

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Doug Monsky <monsky@bellsouth.net>
To: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: Error while reading gs_fonts.ps
Date: Wed, 9 Apr 1997 15:03:34 -0400
Sender: owner-flexfax@celestial.com


I downloaded hylafax-sco3.2v5.0-v4.0pl1-cpio.gz from ftp.sgi.com.  I am able to send faxes if they are already tiff's.  The first time I installed the binary distribution I somehow installed a 3.53 version of ghostscript.  I would receive errors about fonts not being found when converting postscript documents with ps2fax.  I then read the INSTALL file and did find a few steps I missed.  So I reinstalled everything.  Now whenever gs is executed the following message is generated.  This happens when gs is executed by itself with or without parameters.  If any one can help me with this error I would appreciate any help.

gs version 2.6.2 (I received the binary distribution from ftp.sgi.com, and would not like to have to compile any new versions)
HylaFAX version 4.0pl1


While reading gs_fonts.ps:
Error: /undefinedfilename in --file--
Operand stack:
    ()  0  (/usr/local/lib/ghostscript/fonts/*)  (/usr/local/lib/ghostscript/fonts/*)  (r)
Execution stack:
    %interp_exit  --nostringval--  --nostringval--  --nostringval--  false  --nostringval--  --nostringval--  --nostringval--  %loop_continue  --nostringval--  --nostringval--  /usr/local/lib/ghostscript/fonts/*  /usr/local/lib/ghostscript/fonts/*??????????????????????????????????????????????????????????????????????????????????????????????    --nostringval--  %file_continue  --nostringval--  --nostringval--  --nostringval--
Dictionary stack:
    422/547  5/200  422/547
Current file position is 5532


Check any PostScript documents for non-standard fonts and invalid constructs.

    ---- Unsent job status ----

   Destination: 6357935
         JobID: 2
       GroupID: 2
        Sender: Superuser
      Mailaddr: root@SSCo3
Submitted From: localhost
    Page Width: 215 (mm)
   Page Length: 279 (mm)
    Resolution: 98 (lpi)
        Status: While reading gs_fonts.ps:
Error: /undefinedfilename in --file--
Operand stack:
    ()  0  (/usr/local/lib/ghostscript/fonts/*)  (/usr/local/lib/ghostscript/fonts/*)  (r)
Execution stack:
    %interp_exit  --nostringval--  --nostringval--  --nostringval--  false  --nostringval--  --nostringval--  --nostringval--  %loop_continue  --nostringval--  --nostringval--  /usr/local/lib/ghostscript/fonts/*  /usr/local/lib/ghostscript/fonts/*??????????????????????????????????????????????????????????????????????????????????????????????    --nostringval--  %file_continue  --nostringval--  --nostringval--  --nostringval--
Dictionary stack:
    422/547  5/200  422/547
Current file position is 5532

       Dialogs: 0 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 0 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 0 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc2.ps.2           7851 PostScript
    
    
	PS: Thanks to Tim Rice for his assistance with determining one problem was caused by third party serial drivers

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 9 Apr 97 15:32:18 EDT
To: flexfax@sgi.com
Subject: Re: hylafax html/java client ?
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Viewfax can be used to graphically view the received fax files: I'd
once again like to suggest changing the names of those files from
fax#####.tif to fax#####.fax, to let the HTML clients distinguish them
from normal TIFF files.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM0vuuz/+ItycgIJRAQGCmwQAkGOZ1GaBVFU0OTpyhGK2AV3mYM94zvKV
4dUGPfuALm2kaguhzGeDqE9FD0LnJXJA0I0sUZh1PfjtLxc6UefgSTKVxhxnjO1o
SxRVglMZ4Q3zRQcW0EIvzjLueGMYC/28XbEsEHwoZxwgD5IFfD9NF6xzcWLRovPd
bZhqQ87gBdA=
=BiNU
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 10 Apr 1997 08:54:38 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Charles G Stuart <charles.stuart@juno.com>
cc: flexfax@sgi.com
Subject: Re: No cover page
Sender: owner-flexfax@celestial.com

On Wed, 9 Apr 1997, Charles G Stuart wrote:

[snip]
> to send cover pages when run from the command line, with mixed success: 
> usually, the format conversion will fail.

What exactly are you trying to send? If you're sending non-text
documents it really depends on what format-converters you have. It
would also really help if you include the errors you have when you're
attempting this with the -v -v command options for sendfax.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 10 Apr 1997 09:00:16 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Gintautas Rakauskas <gintas@impro.mii.lt>
cc: flexfax@sgi.com
Subject: Re: HYLAFAX
Sender: owner-flexfax@celestial.com

On Tue, 8 Apr 1997, Gintautas Rakauskas wrote:

> We want to use fax/PPP on the same modem.
> 
> 1.uugetty works good with data tarnsfer(PPP, SLIP)
> 2. if we not using  AT+FAA=1 for adaptive answer, fax works ok, data -
> not.
> 3.if we're using AT+FAA=1 -connect ok for data and fax and no more
> movements.

Rerun faxsetup(1) and substitute uugetty for the your getty program.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 10 Apr 1997 09:05:26 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Ales Tancer <ales.tancer@uni-mb.si>
cc: flexfax@sgi.com
Subject: Re: Problems installing modem with faxaddmodem
Sender: owner-flexfax@celestial.com

On Tue, 8 Apr 1997, Ales Tancer wrote:

> So i created it my self and run faxsetup
> again. The modem is on COM3 - ttyS2. So i simply typed ttyS2 and all the
> stuff that is needed to setup modem. Faxaddmodem checks speed of modem
> and it stops at 19200. But after choosing speed i get messege "Modem is
> not responding....". Modem is not on a direct line, but on a phone
> central so i must first dial 9 to get a dial tone and then rest of
> numbers. I thought that faxaddmodem is checking for dial tone and i
> don't know where to tell him to dial 9 and then check for a dial tone.

I take it you have confirmed that the modem works properly if you
connect directly to it using `cu'?
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 09 Apr 1997 18:24:31 -0400
To: David Dawes <dawes@rf900.physics.usyd.edu.au>
From: Ivan Kohler <ivan@voicenet.com>
Subject: Re: Modem Recommendation
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

I don't know about locally available in Australia, but have you checked
http://www.vix.com/hylafax/modems.html ?

At 12:50 PM 4/9/97 +1000, David Dawes wrote:
>I was wondering if any of the Australians on this list could recommend
>a locally available fax modem known to work well with HylaFAX 4.0pl1.
>
>Alternatively is the information from the "user survey" forms available
>somewhere?
>
>David
>
>

Ivan Kohler
VoiceNet Staff
ivan@voicenet.com
"I ain't often right but I've never been wrong
 It seldom turns out the way it does in the song
 Once in a while you get shown the light
 in the strangest of places if you look at it right" -JG/RH


From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Rex Fowler <rmfowler@raptor.mtc.ti.com>
Subject: sendpage -p argument
To: flexfax@sgi.com
Date: Wed, 9 Apr 1997 17:56:48 -0500 (CDT)
Reply-To: rmfowler@mtc.ti.com
Sender: owner-flexfax@celestial.com

Is there a way to specify the dial number and pin on the command line
without using /etc/pagermap (or whatever PagerIDMapFile says)?

my version is 4.0pl1

ie can I telnet to port 444 and specify something like

PAGE 5551212 123456

instead of

PAGE alias

where "alias" is defined in /etc/pagermap

Thanks

-- 
Rex Fowler              http://www.mtc.ti.com/~rmfowler
(972)997-2779           mailto:rmfowler@mtc.ti.com
Alpha Pager             http://www.mtc.ti.com/cgi-bin/alpha_pager.cgi
TI MSG                  rfow

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: Brian Walters <macbnr@saratoga.compassnet.com>
Cc: flexfax@sgi.com
Subject: Re: Page Width..Still a problem 
Date: Thu, 10 Apr 1997 10:43:13 JST
From: "Andrew S. Howell" <andy@tibco.com>
Sender: owner-flexfax@celestial.com

>>>>> "Brian" == Brian Walters <macbnr@saratoga.compassnet.com> writes:


    Brian> BULL HOCKEY!!! I've found the answer and would like to
    Brian> share it with the group. I'm now using Alladin's GS 4.03
    Brian> and simply setting -sPAPERSIZE=legal in the ps2fax
    Brian> script. That's it folks. I need to work on a script to
    Brian> dynamically change this between legal and letter, I don't
    Brian> care about that right now. My client will be happy and I'm
    Brian> closer to getting that smokin' 4 proccessor server for
    Brian> "home enjoyment"

I've been trying to get FrameMaker ps docs to work. For some other
files, someone mentioned using FIXEDMEDIA in ps2fax. Tried this, but
then the FrameMaker doc spits out a message that it can't set the page
size. I think I need to use setpagedevice to silently ignore the page
size change request, but I'm not sure how to do this. Maybe I need to
read Adobe's PostScript Languge Reference Manual 15 more times and it
will sink in....

Anyone have any clues ? 

Andy

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 10 Apr 1997 14:24:13 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: william@irs.tatung.com.tw
cc: Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: HylaFaxV4.0pl1 on UnixWare 2.XX
Sender: owner-flexfax@celestial.com

On Wed, 9 Apr 1997 william@irs.tatung.com.tw wrote:

> Hi, Matthias and Tim Rice
> 
> Thanks for your answer ?
> 
> i compile and install the HylaFaxV4.0pl1 on UnixWare 2.03.
> So far so good. Then i use "sendfax -n -d 5984467 config" 
> to send a small document(about 8 linws)  to a Fax Machine. 
> >From the session log, everything is ok, but 
> 
>   the receiver only get some of the context.
>   (it looks like half page, and some lines are merged together). 

Sounds like a hand-shaking problem, I'd check your cable connection;
as you say, the session log looks ok.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 9 Apr 1997 20:54:47 -0700 (PDT)
From: Tim Rice <tim@trr.metro.NET>
To: Doug Monsky <monsky@bellsouth.net>
cc: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: Re: Error while reading gs_fonts.ps
Sender: owner-flexfax@celestial.com

On Wed, 9 Apr 1997, Doug Monsky wrote:

> 
> I downloaded hylafax-sco3.2v5.0-v4.0pl1-cpio.gz from ftp.sgi.com.  I am
> able to send faxes if they are already tiff's.  The first time I
> installed the binary distribution I somehow installed a 3.53 version of
> ghostscript.  I would receive errors about fonts not being found when
> converting postscript documents with ps2fax.  I then read the INSTALL file
> and did find a few steps I missed.  So I reinstalled everything.
> Now whenever gs is executed the following message is generated.
> This happens when gs is executed by itself with or without parameters.
> If any one can help me with this error I would appreciate any help.
>

Did you also get the 2.6.2 fonts from prep.ai.mit.edu?
Perhaps gs 2.6.2 is getting confused by the 3.53 version you had.
Maybe it's time to remove all the ghostscript stuff
(rm -r /usr/local/lib/ghostscript) and reload the gs binary from ftp.sgi.com
the ghostscript fonts from prep.ai.mit.edu and the hylafax binary
(there are some important fonts in there too).

> gs version 2.6.2 (I received the binary distribution from ftp.sgi.com, and would not like to have to compile any new versions)
> HylaFAX version 4.0pl1
> 
> 
> While reading gs_fonts.ps:
> Error: /undefinedfilename in --file--
> Operand stack:
>     ()  0  (/usr/local/lib/ghostscript/fonts/*)  (/usr/local/lib/ghostscript/fonts/*)  (r)
> Execution stack:
>     %interp_exit  --nostringval--  --nostringval--  --nostringval--  false
[snip]
> 
> 

--
Tim Rice			Multitalents	(707) 887-1469 (voice)
tim@trr.metro.net

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 10 Apr 1997 12:04:20 +0700
From: Ruediger Koch <rkoch@samart.co.th>
To: rmfowler@mtc.ti.com
CC: flexfax@sgi.com
Subject: Re: sendpage -p argument
X-MIME-Autoconverted: from 8bit to quoted-printable by yum.samart.co.th id LAA23677
Sender: owner-flexfax@celestial.com

Rex Fowler wrote:
> 
> Is there a way to specify the dial number and pin on the command line
> without using /etc/pagermap (or whatever PagerIDMapFile says)?
> 
> my version is 4.0pl1
> 
> ie can I telnet to port 444 and specify something like
> 
> PAGE 5551212 123456
> 
> instead of
> 
> PAGE alias
> 
> where "alias" is defined in /etc/pagermap
> 
> Thanks
> 
You need a pagermap file. put an entry in like

.*              9846786/&

at the end of your pagermap, where 9846786 is the phonemumber for the
modem to dial, & is the placeholder for the pinnumber U specify in
sendpage. This is my pagermap file:

yut             9846786/1919286
siriporn        9846786/1919289
apinya          9846786/1919269
rungrawe        9846786/1919372
chanarat        9846786/4414502
darin           9846786/1919019
pvimutka        9846786/1919029
sopawan         9846786/1919287
charoon         9846786/1919277
sinee           9846786/6341618
sopida          9846786/4414325
vip029          9846786/1919966
.*              9846786/&
# Hutchinson: phone: 162, protocol
# Easycall:   phone: 1500, protocol
# PhoneLink:  phone: 152, protocol
# Paclink:    phone: 1144, protocol

then you say:

bash% sendpage -p 4711 "BlaBla"

to page the pager with the pin 4711

Cheers
Rüdiger

-- 
Samart Corporation public Co., LTD.
555 Rasa Tower, 20th Floor, Phaholyotin Rd.   e-mail: rkoch@samart.co.th
Bangkok 10900, Thailand                          http://www.samart.co.th

/* ... And remember: if you don't like the news, go out and make some of
your own. */

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: sendpage -p argument
To: rmfowler@mtc.ti.com
Date: Thu, 10 Apr 1997 07:57:59 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Rex Fowler wrote:
    
    Is there a way to specify the dial number and pin on the command line
    without using /etc/pagermap (or whatever PagerIDMapFile says)?
    
    my version is 4.0pl1
    
    ie can I telnet to port 444 and specify something like
    
    PAGE 5551212 123456
    
    instead of
    
    PAGE alias
    
    where "alias" is defined in /etc/pagermap

check if the regular expressions in the pagermap(4F) file
will do what you want; e.g. try

(.*)/(.*)	\1/\2

don't know if this will work;

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: fax polling
To: kai@kmk.rhein-main.de (Kai Michael Kretschmann)
Date: Thu, 10 Apr 1997 08:16:31 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Kai Michael Kretschmann wrote:
    
    Hi there,
    
    normal fax sending/receiving works very well, but polling doesn't.
    If I submit a job via "sendfax -p -d 06155660915" I get this
    faxstat output:
    
    HylaFAX scheduler on fix.kmk.rhein-main.de: Running
    Modem ttyS9 (+49.6172.767944): Running and idle
    Modem ttyS3 (+49.6172.767944): Running and idle
    
    JID  Pri S  Owner Number       Pages Dials     TTS Status
    16   127 W    kai 06155660915   0:0   0:12
    
    The modem never dials or even tries to. What I'm missing?

It should work (and works for me). Please enable the server tracing
for the bits "queue managment", "job management" "server op";
see config(4F) for details and maybe for other bits to enable.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: william@irs.tatung.com.tw
To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
Cc: flexfax@sgi.com
Date: Thu, 10 Apr 1997 08:43 TWN
Subject: Re: HylaFaxV4.0pl1 on UnixWare 2.XX
Sender: owner-flexfax@celestial.com

Hi, Matthias

Thanks for your help. You have solved my problem. Now i use tty01h
instead of tty01, everything is good. So HylaFaxV4.0pl1 can work
correctly on UnixWare 2.XX.

William Lin.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 10 Apr 1997 11:06:59 +0200 (GMT+0200)
From: Uri Shkolnik <uri@harmonic.co.il>
To: Lotfi Azaiez <lotfi.azaiez@rz.fh-nuernberg.de>
cc: flexfax@sgi.sgi.com
Subject: Re: service name "fax" is not found !
Sender: owner-flexfax@celestial.com

Hi,

You have to add ports to the Windows machine` services file.
Win95 - \windows\services
WinNT - \winntxx\system\config\services (or maybe somewhere else)
The lines followed is part of my users installation script (Win95).

echo fax     4557/tcp  >> c:\windows\services

echo hylafax 4559/tcp  >> c:\windows\services 


Regards

**************************************************
* Uri Shkolnik - System Administrator            *
* Harmonic Lightwaves (Israel)                   *
* Tel: 972 6 6230150 Ext. 122   Fax: ~~ 6230151  *
* Email: uri@harmonic.co.il                      *
**************************************************

On Wed, 9 Apr 1997, Lotfi Azaiez wrote:

> I have HylaFAX Version 4.0pl1 on Linux-Server.
> winflex version 0.4a beta (02 jun 94) gives while asking for Send
> (receive) queue 
> status : 
> 
> Error :Unable to find service name "fax": WSANO_DATA: No host data
> record of
> requested type
> 
> Logfile :
> Trace: Creating tcSocket, type=1, this=0A57:BF78
> Information: Initialising WinSock library: WSAStartup()
> Debug: tcSocket: SOCKET=66
> Debug: tcSocket(0A57:BF78): WSAAsyncSelect(66, 0x517c, 1135, 0x0)
> Trace: Creating tcBufSocket, this=0A57:BF78
> Debug: tcSocket(0A57:BF78): WSAAsyncSelect(66, 0x517c, 1135, 0x27)
> Information: Connecting to '141.75.20.151'
> Trace: tcSocket(0A57:BF78)::Connect(141.75.20.151, fax, tcp)
> Debug: tcSocket(0A57:BF78): getservbyname(fax, tcp)
> ERROR: Unable to find service name "fax": WSANO_DATA: No host data
> record of
> requested type
> WARNING: Connect("141.75.20.151", "fax") failed.
> Information: Trying Connect("141.75.20.151", 4557)
> Trace: tcSocket(0A57:BF78)::Connect(141.75.20.151, 4557)
> Debug: IP Address = 141.75.20.151
> Debug: tcSocket(0A57:BF78): WSAAsyncSelect(66, 0x517c, 1135, 0x37)
> Information: tcSocket(0A57:BF78): connect(66, 141.75.20.151, 4557)
> Information: Connect returned 0
> Information: Connect() completed synchronously(!)
> Trace: Socket connected.  Current error code: 0
> Enter state: Connected to server
> Information: Sending version information
> Debug: tcSocket(0A57:BF78): WSAAsyncSelect(66, 0x517c, 1135, 0x27)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:9402, 9)
> Debug: Posting FD_WRITE message to self
> Debug: tcBufSocket(0A57:BF78): send(2A2F:1CA0, 1)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:9426, 10)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:1CA0, 1)
> Information: Waiting for receive queue status
> Debug: tcBufSocket(0A57:BF78): send(2A2F:9426, 14)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:1CA0, 1)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:9426, 11)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:1CA0, 1)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:1546, 1)
> Debug: tcBufSocket(0A57:BF78): send(2A2F:1548, 1)
> Information: Spurious call to Connected() in state 1
> Debug: tcBufSocket(0A57:BF78): Writable(0)
> Debug: ::send(0A57:9B70, 50) returned 50
> Enter state: Waiting for data from server
> Debug: tcBufSocket(0A57:BF78): Writable(0)
> Debug: tcBufSocket(0A57:BF78): Writable() but no data)
> Debug: tcBufSocket(0A57:BF78): Writable(0)
> Debug: tcBufSocket(0A57:BF78): Writable() but no data)
> Debug: tcBufSocket(0A57:BF78): Readable(0)
> Debug: tcBufSocket(0A57:BF78):  read 31 bytes. 31 buffered
> Debug: ffSocket::lineRead() called
> Debug: tcLineBufSocket(0A57:BF78): readLine(2A2F:94EC, 255)
> Debug: tcBufSocket(0A57:BF78): recv(2A2F:94EC, 31)
> Information: Remote closed connection (end of data)
> Trace: Destroying tcBufSocket, this=0A57:BF78
> Trace: Destroying tcSocket: 0A57:BF78
> Debug: tcSocket(0A57:BF78): WSAAsyncSelect(66, 0x517c, 1135, 0x0)
> Debug: tcSocket(0A57:BF78): closesocket(66)
> 
> 
> Any idea why service name "fax" is not found ?
> my services file is (OK): 
> 	fax	      4557/tcp 
> 	fax	      4557/udp
> 
> sending fax work always ok(but only unde (tcp,4557).
> 
> thanks,
> Lotfi
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 10 Apr 1997 11:21:57 +0200 (GMT+0200)
From: Uri Shkolnik <uri@harmonic.co.il>
To: Brian Walters <macbnr@saratoga.compassnet.com>
cc: flexfax@sgi.com
Subject: Re: Page Width..Still a problem
Sender: owner-flexfax@celestial.com

Hi,

I have problems with "Page Width...", but the solution is not clear to me.
Here is the script part which defined the paper size


case "${pagewidth}x${pagelength}" in
1728x280|1728x279)              # 279.4mm is actually correct...
    paper=letter;;
*x296|*x297)                    # more roundoff problems...
    paper=a4;;
*x364)
    paper=b4;;
*)
    echo "$0: Unsupported page size: $pagewidth x $pagelength";
    exit 254;;                  # causes document to be rejected
esac


What should I change ?



Regards

**************************************************
* Uri Shkolnik - System Administrator            *
* Harmonic Lightwaves (Israel)                   *
* Tel: 972 6 6230150 Ext. 122   Fax: ~~ 6230151  *
* Email: uri@harmonic.co.il                      *
**************************************************

On Wed, 9 Apr 1997, Brian Walters wrote:

> >    Brian> A desperate plea...  Can some one please share any thing
> >    Brian> they've found on the Page width problem. I'm running GS
> >    Brian> 3.33 and I'm getting the 1728/1734 image error when sending
> >
> >    
> >The trick is to not send a Legal size document! If you set the page
> >size to A4, then it should work fine. Of course this may mean you have
> >to re-format the doc :( 
> >
> >If there is a better way, I'd like to know too.
> 
> BULL HOCKEY!!! I've found the answer and would like to share it with the 
> group. I'm now using Alladin's GS 4.03 and simply setting 
> -sPAPERSIZE=legal in the ps2fax script. That's it folks. I need to work 
> on a script to dynamically change this between legal and letter, I don't 
> care about that right now. My client will be happy and I'm closer to 
> getting that smokin' 4 proccessor server for "home enjoyment"
> 
> On a side note. I may be releasing Win95 fax client to the group soon, 
> but I could use a little help from a sharp Windoze programmer on printer 
> ports. 
> 
> Share your knowledge! Everyone learns that way.
> 
> 
> 
> Brian Walters<------------------------------------>macbnr@compassnet.com
>       "How many computers can one have before they become obsessed???"
> ________________________________Systems__________________________________
> PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
> Amd586-133    32mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
> Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
> 486 dx100     16mgs    1.6gigs       RH 4.1 w/ HylaFax!!!
> _________________________________________________________________________
> http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
>     http://www.compassnet.com/macbnr               My home page
> 
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Re: Page Width..Still a problem
Date: Thu, 10 Apr 97 08:47:36 -0500
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: "Uri Shkolnik" <uri@harmonic.co.il>
cc: <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

>I have problems with "Page Width...", but the solution is not clear to me.
>Here is the script part which defined the paper size

The only thing I've changed in the ps2fax script right now is later down 
in the script I added paper=legal. I guess this just circumvents the case 
statement you listed. Look in the logs and tell me what the page width 
error says. If it mentions the fax wanting 1728 and image being 1734 then 
you should try the Aladdin GS 4.03. Also I think I had to change 
-PAPERSIZE  to -sPAPERSIZE
in the ps2fax script when I started using gs 4.03.

Now that you mention it I need to look at the case statement in ps2fax 
and see if I can adjust that to have a legal choice as well. That would 
certainly allow me to send both legal and letter under normal 
circumstances. Of course this isn't a big deal for me now since the 
client only wants Legal sheets faxed.

Share the wealth! Knowledge is power!




Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    32mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs     1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

Original-Received: by 
                   tferi3.uni-mb.si (UCX V3.2 VAX) Thu, 10 Apr 1997 15:08:48 
                   +0200
PP-warning: Illegal Received field on preceding line
Date: Thu, 10 Apr 1997 15:08:44 +0000
From: TANCER ALES <ales.tancer@uni-mb.si>
To: flexfax@sgi.com
Subject: Re: Problems installing modem with faxaddmodem
Sender: owner-flexfax@celestial.com

> On Tue, 8 Apr 1997, Ales Tancer wrote:
> 
> > HI!
> >
> > 	My name is Ales and i'm new with HylaFax. I have a problem with
> > installing fax device for use in HylaFax. I've got source code of
> > HylaFax v4.0p11alpha022. I compiled it under Linux (RedHat 4.0 -
> > Colgate). There are two modems in my computer. First one is USRobotics
> > Sporster 28.8K (internal) and some kind of ISDN modem. ISDN modem is not
> > important in this case, because i want to use HylaFax with USR. Whole
> > instalation went smooth only there was a problem when HylaFax should
> > create a user acc named fax. So i created it my self and run faxsetup
> > again. The modem is on COM3 - ttyS2. So i simply typed ttyS2 and all the
> > stuff that is needed to setup modem. Faxaddmodem checks speed of modem
> > and it stops at 19200. But after choosing speed i get messege "Modem is
> > not responding....". Modem is not on a direct line, but on a phone
> 
> In that case "Modem is not responding..." means that software is not
> recieving feedback for the "AT" commands it has sent. There is no line
> test at that stage as far as I know.
> 
> Modems on COM3 often cause hardware conflicts with COM1 since they share
> the same hardware IRQ. You may try one of these:
> 
> * Disable COM1 from the bios setup - if the port is on board - else with
> the jumpers on the I/O card.
> 
> * Disable both COM1 and COM3 as described above and set your internal USR
> modem to COM1.
> 
> * Configure your internal modem to use an IRQ other than 3 or 4 (using
> IRQ 5, 7 or 9 may be a good idea), then configure your rc.serial for the
> new IRQ setting.
> 
> Re-run faxsetup.
> 
> Good luck.
> 
> Emre Sezginer
> METU Computer Center
 
 Thanx all 4 you're help. Modem is now configured. First it was on COM3 
IRQ7 and cu worked ok. So i don't know where was the problem. I moved it 
to COM4 IRQ3 and now is working fine. 

 Thanx,
	Ales

+-------------------------+--------------------------------------------+
| Ales Tancer,            | E-Mail   : ales.tancer@uni-mb.si           |
| University of Maribor,  | Homepage : http://tferi3.uni-mb.si/~tancer |
| Faculty of EE and CS,   | Phone    : ++386 62 662 168                |
| Maribor, Slovenia.      | Fax      : ++386 62 661 468                |
+-------------------------+--------------------------------------------+

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: David Dawes <dawes@rf900.physics.usyd.edu.au>
Subject: Success with Netcomm SmartModem M34F
To: flexfax@sgi.com
Date: Fri, 11 Apr 1997 09:32:38 +1000 (EST)
Sender: owner-flexfax@celestial.com

I've finally had some success in getting a NetComm SmartModem M34F (an
Australian made modem) working with HylaFAX 4.0pl1.  Since I couldn't
find some of the things I had to do to get it working mentioned in the
docs or FAQ, I thought I'd post some details here.

I've updated the firmware to the latest available from NetComm's web
site (http://www.netcomm.com.au), and it identifies itself as:

MODEM NETCOMM LTD. Series 5  V.34 28800 Modem DFS256K(A4)-Z7/V2.61L Fri Jul 28 11:51:10 1995

That's not very recent, but the modem is a few years old, and is not a
current model.

I'm running HylaFAX 4.0pl1 (built from source) on a Pentium box running
FreeBSD 2.2.

Starting with the standard "class2" config file, with the following changes
that seem to be required for a lot of Rockwell-based modems:

ModemDialCmd:		ATDT%s
ModemRecvFillOrder:	MSB2LSB
Class2DDISCmd:		AT+FDIS
Class2RecvDataTrigger:	"\022"

I had problems both sending and receiving faxes most of the time.
Occasionally a send or receive would be successful.

I found that by disabling Class2RELCmd:

Class2RELCmd:		""

I could get receives working reliably.  Without this (and with
PercentGoodLines set to 0), received faxes were garbage over 90% of the
time, with fax2ps reporting lots of:

Fax3Decode1D: fax00043.tif: Bad code word at scanline 1 (x 1624).

messages.


The problem sending faxes appears in the session logs as:

Apr 09 13:20:39.94: [  203]: SEND send EOP (no more pages or documents)
Apr 09 13:20:39.94: [  203]: <-- [9:AT+FET=2\r]
Apr 09 13:20:40.36: [  203]: --> [15:+FHT: FF 13 2F ]
Apr 09 13:20:43.07: [  203]: --> [15:+FHR: FF C8 31 ] 
Apr 09 13:20:43.07: [  203]: --> [7:+FPTS:1]
Apr 09 13:20:43.07: [  203]: SEND recv MCF (message confirmation)
Apr 09 13:20:43.08: [  203]: SEND FAX (00000112): FROM dawes@rf900 TO 1300368999 (page 1 of 1 sent in 0:20)
Apr 09 13:20:43.08: [  203]: SEND FAX (00000112): FROM dawes@rf900 TO 1300368999 (docq/doc75.ps;00 sent in 0:20)
Apr 09 13:20:43.20: [  203]: <-- [5:ATH0\r]
Apr 09 13:20:43.32: [  203]: --> [15:+FHT: FF 13 FB ]
Apr 09 13:20:43.32: [  203]: --> [7:+FHNG:2]
Apr 09 13:20:43.32: [  203]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (code 2)
Apr 09 13:20:43.32: [  203]: --> [2:OK]


On occasions where a send succeeded, the final three lines were:

Apr 10 16:53:27.32: [ 6832]: --> [7:+FHNG:0]
Apr 10 16:53:27.32: [ 6832]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Apr 10 16:53:27.32: [ 6832]: --> [2:OK]


After reading a message someone posted here a few months ago about a similar
problem with a similar modem, and looking though the Supra/Rockwell Class 2
docs on the HylaFAX web site it seemed that the explicit hangup (ATH0)
was causing the problem.  The above Class 2 docs (which I know are not the
real spec) don't show an explicit hangup command being sent to the modem,
but rather that the hangup and FHNG reply should happen as a consequence
of the AT+FET=2 command.  This does indeed seem to be the problem, and I've
found that doing the following:

ModemOnHookCmd:		<waitfor:OK>

solves this problem.  An alternative might be to simply delay the ATH0 to
make sure that both ends have finished the events set in train by the
AT+FET=2 before forcing a hangup.

With this change, the session logs look like:

Apr 10 17:05:43.53: [ 6937]: SEND send EOP (no more pages or documents)
Apr 10 17:05:43.53: [ 6937]: <-- [9:AT+FET=2\r]
Apr 10 17:05:43.86: [ 6937]: --> [15:+FHT: FF 13 2F ]
Apr 10 17:05:46.58: [ 6937]: --> [15:+FHR: FF C8 31 ]
Apr 10 17:05:46.59: [ 6937]: --> [7:+FPTS:1]
Apr 10 17:05:46.59: [ 6937]: SEND recv MCF (message confirmation)
Apr 10 17:05:46.59: [ 6937]: SEND FAX (00000119): FROM dawes@rf900 TO 1300368999 (page 1 of 1 sent in 0:20)
Apr 10 17:05:46.60: [ 6937]: SEND FAX (00000119): FROM dawes@rf900 TO 1300368999 (docq/doc78.ps;00 sent in 0:20)
Apr 10 17:05:46.81: [ 6937]: --> [15:+FHT: FF 13 FB ]
Apr 10 17:05:48.17: [ 6937]: --> [7:+FHNG:0]
Apr 10 17:05:48.17: [ 6937]: REMOTE HANGUP: Normal and proper end of connection
(code 0)
Apr 10 17:05:48.17: [ 6937]: --> [2:OK]


Later, when looking through the server tracings, I found that receives
were typically ending with an abnormal FHNG status too, and making this
change also fixed that (which was causing some senders to sometimes not
get the MCF and thus assume that the transmission had failed).


David

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Holger.Pfaff@class.de
Date: Fri, 11 Apr 1997 12:39:03 +0200 (MET DST)
To: flexfax@sgi.com
Subject: [8:+FHNG:52]
Cc: holger@class1.class.de
X-Sun-Charset: US-ASCII
Sender: owner-flexfax@celestial.com

Hi!

After several problems with Creatix and Zyxel Modems (usually +FHNG:2)
we now switched to a Multitech Modem in hope of a more reliable Fax
System.  However even the Multitech Modem seems to have trouble
transmitting Faxes:

Apr 11 10:27:31.60: [ 3479]: --> [2:OK]
Apr 11 10:27:31.60: [ 3479]: SEND send MPS (more pages, same document)
Apr 11 10:27:31.60: [ 3479]: <-- [9:AT+FET=0\r]
Apr 11 10:27:49.87: [ 3479]: --> [8:+FHNG:52]
Apr 11 10:27:49.87: [ 3479]: REMOTE HANGUP: No response to MPS repeated 3 times

Same Fax sent 5 mins later using a regular Fax Machine transmitted both
Pages just fine.

I'm using Hylafax v4.0pl0 on a Sun SparcStation2 with Solaris 2.5.1
installed.  The modem is connected through a 8 port Magma Sbus Card.
The modem is a Multitech MT2834:

ATI0	RESULT = "OK"	RESPONSE = "247"
ATI1	RESULT = "OK"	RESPONSE = "0209"
ATI2	RESULT = "OK"	RESPONSE = "MT2834BLI"
ATI3	RESULT = "OK"	RESPONSE = "231 169 240 001 019 000 239 010"

Any ideas ?

-- Holger

C.L.A.S.S. GmbH      | Holger.Pfaff@class.de       | tel: +49 8151 9049 71
Soeckinger Str. 6a   | http://www.class.de         | fax: +49 8151 9049 39
82139 Starnberg, Ger.| http://www.class.de/~holger | mob: +49 172 821 3029

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 11 Apr 1997 14:59:13 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: HylaFax Mailing liste <flexfax@sgi.com>
Subject: WHFC 0.3b
Sender: owner-flexfax@celestial.com

Hi,

i have uploaded whfc 0.3b to our server (http://www.rgw-express.de/whfc)

The problems with the "insane time on spool file" bug should now be
completly fixed. Also a bug in the generation of the comments lines
for the faxcover is fixed.

Uli
-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Waiting for modem to come ready
To: ameissonnier@dohle.com (Alexandre Meissonnier)
Date: Fri, 11 Apr 1997 16:13:15 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Alexandre Meissonnier wrote:
    
    I have now re-installed HylaFAX and run some more tests. Recieving =
    incoming faxes works fine, but as soon al I try to send a fax, =
    everything is blocked - both send and recieve.
    
    The source of this problem seems to be the faxgetty process. When =
    faxgetty is running, no other processes (especially faxq) can access the =
    modem.=20
    When i change my inittab entry to 'faxgetty -D tty2A', I get back to a =
    send-only system.
    
    
    -----Original Message-----
    From:	Matthias.Apitz@softcon.de [SMTP:Matthias.Apitz@softcon.de]
    Sent:	Tuesday, April 08, 1997 8:13 AM
    To:	Alexandre Meissonnier
    Cc:	flexfax@sgi.com
    Subject:	Re: Waiting for modem to come ready
    
    Did you run faxsetup(1M) or faxaddmodem(1M) for this modem?
    Why do you *copied* it from the spool/config?
    
    [Alexandre Meissonnier]  As said above, I re-installed everything, and =
    had faxsetup and faxaddmodem do the configuration. The only thing I =
    changed manually is the ModemDialCmd to tell the modem not to wait for a =
    dial tone.
       =20
    
    Please enable the tracing level for the FIFO messages passed
    between the daemons=20
    
    [Alexandre Meissonnier]  How can I do this? I didn't find a config entry =
    for this.

read the man page of config(4F) and look for the parameter
ServerTracing and the value for "FIFO Messages".
    
you have also to configure the syslogd(1M) if not already done;
    
    . Please show your full
    /etc/inittab. Are there "off" lines for the label "fax" or
    other lines for /dev/tty2A or /dev/tty2a?
    
    [Alexandre Meissonnier]  Here are the significant lines. There are no =
    other lines for the label "fax".
    
    Se2A:234:off:/etc/getty -t60 tty2A 9600
    Se2a:234:off:/etc/getty tty2a m

please comment or remove the above two lines and re-start init with
a kill -HUP

    fax:234:respawn:/usr/local/HylaFAX-v4.0/slib/faxgetty tty2A
    
	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Steve Hanselman <shanselman@brendata.co.uk>
To: flexfax@sgi.com
MMDF-Warning:  Parse error in original version of preceding line at relay-7.mail.demon.net
Subject: WHFC Lockups
Date: Fri, 11 Apr 1997 16:06:30 +0100
Sender: owner-flexfax@celestial.com

I've just downloaded the latest version (0.3b) and am still seeing the
lockups.

We have a cover page defined, more than one entry in the phone book, the
problem occurs whether on-line or off-line.

We have successfully sent faxes via WHFC, and have no problems sending from
either the Unix command line or from the old Winflex client.

We are running Windows/95 with Service pack 1 installed.

Quite a few people have reported this, what is the best way to start
tracking it down, what information do we all need to collect?

Steve

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 11 Apr 1997 11:28:50 -0400 (EDT)
From: "Carson's of High Point" <carsons@InfoAve.Net>
Subject: Job Terminating upon fax running out of paper!
To: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

Everyone,

   I am having a problem where I get a failed fax when the receiving fax
runs out of paper! Is there a configuration parameter I can change to make
the fax keep try till MAXDIALS or KILLTIME is met? Is this a bug/feature?
If it is a bug/feature I think it would be beneficial to make the system
retry until MAXDIALS or KILLTIME is met.

   Thanks in advance for any and all help!

Marty :)
Everyone must have faith to achieve. If you're without faith, you're
without hope. Napolean Hill - Think and Grow Rich

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Rex Fowler <rmfowler@raptor.mtc.ti.com>
Subject: MaxMsgLength > 128 ?
To: flexfax@sgi.com
Date: Fri, 11 Apr 1997 17:40:46 -0500 (CDT)
Reply-To: rmfowler@mtc.ti.com
Sender: owner-flexfax@celestial.com


I have the following in hfaxd.conf and sendpage.conf
MaxMsgLength:	600

But get the following message when trying to send a message
larger than 128 characters.  Am I configuring it in the wrong place?

Apr 11 17:36:12 raptor PageSend[21952]: Pager message length 156 too large; truncated to 128

I'm told that our paging hardware will support 600 char messages.

-- 
Rex Fowler              http://www.mtc.ti.com/~rmfowler
(972)997-2779           mailto:rmfowler@mtc.ti.com
Alpha Pager             http://www.mtc.ti.com/cgi-bin/alpha_pager.cgi
TI MSG                  rfow

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Greg Rowe <greg@uswest.net>
Subject: Multiple PIN's for Paging
To: flexfax@sgi.com
Date: Fri, 11 Apr 1997 19:57:51 -0500 (CDT)
Sender: owner-flexfax@celestial.com

Greetings,

 I recently upgraded to Hylafax v4.0pl1 and I'm trying to figure out how
to send pages to multiple PIN numbers at the same paging central without
spooling off multiple jobs. The old sendpage could connect to the paging
service and send the message to multiple PIN's during the same session.

 I searched the list archives, and saw that this question has been asked
before, but the answers (if any) weren't posted to the list. Any info 
would be appreciated. Thanks.
-- 
Greg Rowe                           | 
US West - Interact Services         | INTERNET greg@mn.interact.net
111 Washington Ave. South           | Fax:      (612) 672-8537
Minneapolis, MN USA 55401           | Voice:    (612) 672-8535

    To err is human, to really foul up requires the root password.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: MaxMsgLength > 128 ?
To: rmfowler@mtc.ti.com
Date: Sat, 12 Apr 1997 08:40:31 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Rex Fowler wrote:
    
    
    I have the following in hfaxd.conf and sendpage.conf
    MaxMsgLength:	600

This value is for the message length in the SNPP and hfaxd(1M).
    
    But get the following message when trying to send a message
    larger than 128 characters.  Am I configuring it in the wrong place?
    
    Apr 11 17:36:12 raptor PageSend[21952]: Pager message length 156 too large; truncated to 128
    
    I'm told that our paging hardware will support 600 char messages.

Check the man page config(4F) for the value PagerMaxMsgLength
for the daemon pagesend(1M).

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: cover page
To: michaelb@wni.com (Michael Branch)
Date: Sat, 12 Apr 1997 08:42:59 +0200 (MSZ)
Cc: flexfax@celestial.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Michael Branch wrote:
    
    hi,
      What is the procedure for replacing the Silicon Graphics cover page template?
    I've edited the template in the flexfax/etc directory but the stock template
    keeps coming back.  Arrgh!
    
Arrgh :-))  -- read the FAQ at http://www.vix.com/hylafax/FAQ/
or ftp it from ftp://ftp.sgi.com/sgi/fax/doc/hylafaq.tar.gz

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sat, 12 Apr 1997 17:47:02 +0200 (GMT+0200)
From: Uri Shkolnik <uri@harmonic.co.il>
To: Ulrich Eckhardt <uli@rgw-express.de>
cc: HylaFax Mailing liste <flexfax@sgi.com>
Subject: Re: WHFC 0.3b
Sender: owner-flexfax@celestial.com

Hello,

About the problems with whfc - do you run hylafax via inetd or as stand 
along (with script)?

Regards,

**************************************************
* Uri Shkolnik - System Administrator            *
* Harmonic Lightwaves (Israel)                   *
* Tel: 972 6 6230150 Ext. 122   Fax: ~~ 6230151  *
* Email: uri@harmonic.co.il                      *
**************************************************

On Fri, 11 Apr 1997, Ulrich Eckhardt wrote:

> Hi,
> 
> i have uploaded whfc 0.3b to our server (http://www.rgw-express.de/whfc)
> 
> The problems with the "insane time on spool file" bug should now be
> completly fixed. Also a bug in the generation of the comments lines
> for the faxcover is fixed.
> 
> Uli
> -- 
> Ulrich Eckhardt		                   mailto:uli@rgw-express.de
> http://people.frankfurt.netsurf.de/uli
> Truly great madness can not be achieved without significant
> intelligence. (Henrik Tikkanen)
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sat, 12 Apr 97 13:34:10 EDT
From: raoul@cirl.meei.harvard.edu
To: michaelb@wni.com
Cc: flexfax@celestial.com
Subject: Re: cover page
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Michael, there are two copies: one in the source-code/util/cover-templ
file, the other in the source-code/faxcover/faxcover.ps file. They're
used for slightly different things, and can be changed after installation.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM0/Hiz/+ItycgIJRAQG05AP/ZFteSaHkpQQuuTXnXo7z1p7ZiUXRP8nD
vtFPMgrzpa2Qqyzltbqfj8ciUFK6Za60tKGmrPa/av9b5i3i6mcyDl/585RKkGAL
6jkLah9l0xyT20mNfCgsv2BTCJ+h7KYcOUU47v3PtWjYFZBxscchJkPwcGdsJLsJ
ogzhfWTE0ZI=
=4qfo
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Multiple PIN's for Paging
To: greg@uswest.net (Greg Rowe)
Date: Sun, 13 Apr 1997 17:07:00 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Greg Rowe wrote:
    
    Greetings,
    
     I recently upgraded to Hylafax v4.0pl1 and I'm trying to figure out how
    to send pages to multiple PIN numbers at the same paging central without
    spooling off multiple jobs. The old sendpage could connect to the paging
    service and send the message to multiple PIN's during the same session.
    
     I searched the list archives, and saw that this question has been asked
    before, but the answers (if any) weren't posted to the list. Any info 
    would be appreciated. Thanks.


see line 52 of hylafax-v4.0pl1/TODO:
M  batch multiple jobs to the same destination (important for pages)

feel free to provide a patch for it; the work should be done in
faxq(1M) and faxq(1M) should start pagesend(1M) with more then
one qfile;

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 14 Apr 1997 08:52:00 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
Reply-To: Jonathan Chen <jonc@pinnacle.co.nz>
To: Taehwan Weon <weon@solvit.co.kr>
cc: Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: [Q] Current status of HylaFax Commercialization
Sender: owner-flexfax@celestial.com

On Wed, 9 Apr 1997, Taehwan Weon wrote:

> Hi,
> 
> While reading mails from flex-fax mailing list, 
> I am wondering if there is any company commercializing the HylaFax
> package for UNIX, Win NT, etc.

Why would we want to do this when we can get it for free?

> I think HylaFax is very powerful in that it is developed in
> a modularized manner and can be easily integrated to other 
> applications.

Now there's a project you can take up.

> We were succeeded in integrating it with Oracle database and WWW.
> We are interested in commercializing the product. Who in Internet is also
> interested in such a work ?

You better make sure you don't violate the copyrights.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 14 Apr 1997 09:05:01 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Uri Shkolnik <uri@harmonic.co.il>
cc: Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: WHFC 0.3b
Sender: owner-flexfax@celestial.com

On Sat, 12 Apr 1997, Uri Shkolnik wrote:

> Hello,
> 
> About the problems with whfc - do you run hylafax via inetd or as stand 
> along (with script)?

On my system, HylaFAX runs on the server with the faxq, hfaxd and
faxgetty processes active all the time. All the versions of WHFC we've
downloaded still freezes. It appears to be pretty random process on
all the 5 PC's that I've installed it on..
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: [Q] Current status of HylaFax Commercialization
To: jonc@pinnacle.co.nz
Date: Mon, 14 Apr 1997 08:04:34 +0200 (MSZ)
Cc: weon@solvit.co.kr, flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Jonathan Chen wrote:
    
    On Wed, 9 Apr 1997, Taehwan Weon wrote:
    
    > Hi,
    > 
    > While reading mails from flex-fax mailing list, 
    > I am wondering if there is any company commercializing the HylaFax
    > package for UNIX, Win NT, etc.
    
    Why would we want to do this when we can get it for free?

You can get the source and the binaries for some systems
for free together with the support from the folks from the
list and also sometimes patches and fixes :-).
I can imagine that customers want to pay for the software
and for support if they need it (e.g. a problem must be
fixed in 24 hours).
    
    > I think HylaFax is very powerful in that it is developed in
    > a modularized manner and can be easily integrated to other 
    > applications.
    
    Now there's a project you can take up.
    
    > We were succeeded in integrating it with Oracle database and WWW.
    > We are interested in commercializing the product. Who in Internet is also
    > interested in such a work ?
    
    You better make sure you don't violate the copyrights.

>From the HylaFAX's copyright:
	...
Permission to use, copy, modify, distribute, and sell this software and
its documentation for any purpose is hereby granted without fee
	...

Check the file COPYRIGHT for the complete copright note.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 14 Apr 1997 08:27:38 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: Jonathan Chen <jonc@pinnacle.co.nz>
CC: Uri Shkolnik <uri@harmonic.co.il>, Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: WHFC 0.3b
Sender: owner-flexfax@celestial.com

Jonathan Chen wrote:
> 
> On Sat, 12 Apr 1997, Uri Shkolnik wrote:
> 
> > Hello,
> >
> > About the problems with whfc - do you run hylafax via inetd or as stand
> > along (with script)?
> 
> On my system, HylaFAX runs on the server with the faxq, hfaxd and
> faxgetty processes active all the time. All the versions of WHFC we've
> downloaded still freezes. It appears to be pretty random process on
> all the 5 PC's that I've installed it on..
> --
> Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
>   Pinnacle Software Ltd                Voice  : +64.9.415.4460
>   Auckland, New Zealand                Fax    : +64.9.415.4250

Hi,

i also run faxq and hfaxd stand alone. Do you send documents with
graphics ?. WHFC does only sporadic updates of it's windows when it
send data to the server.

I use the PASV-Mode to make data connections to the HylaFAX-Server.
Could there be a problem ? because the data transfer to the server
seems relative slow.

Uli
-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com
Reply-To: andy@tibco.com
Subject: FrameMaker ps file Solution!
Date: Mon, 14 Apr 1997 18:44:35 JST
From: "Andrew S. Howell" <andy@tibco.com>
Sender: owner-flexfax@celestial.com


I finally got FrameMaker PS documents to work with gs 4.03. This is a
bit of a hack, but it works.

FrameMaker docs want to set there own size when they print. This
causes problems because the page comes out 1734 pixles wide, instead
of 1728. Fixing involves changing ps2fax to use -dFIXEDMEDIA, the tail
end of which now look like:

a$CAT $fil | $PS -q \
    -sDEVICE=$device \
    -dNOPAUSE \
    -dSAFER=true \
    -sPAPERSIZE=$paper \
    -dFIXEDMEDIA \
    -r204x$vres \
    "-sOutputFile=$out" \
    -
With this alone though, FrameMaker docs just spit out a message that
they can't set the page size. I then I added the following to gs_init.ps:

% Ignore PageSize change requests. This is to make FrameMaker documents 
% work with Hylafax. ps2fax needs -dFIXEDMEDIA as well. 
<< /Policies << /PageSize 1 >> >> setpagedevice

Since gs looks for its files in the current directory, I copied
gs_init.ps to where I have my Hylafax installed. In my case,
/var/spool/fax. This way my kludge won't interfere with other uses of
gs. When ps2fax runs, the current directory is /var/spool/fax

Having done that, FrameMaker 4.0 and 5.0 documents that were formated
for letter size come out just fine. Horraaaayyyy!

Andy

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 14 Apr 1997 11:05:20 +0100
To: Hylafax Mailing List <flexfax@sgi.com>
From: Phil Watkinson <pkw@elgro.co.uk>
Subject: whfc and fax queue problem (Was : Re: WHFC 0.3b)
Sender: owner-flexfax@celestial.com

At 09:05 14/04/97 +1200, Jonathan Chen <jonc@pinnacle.co.nz> wrote:
>
>On my system, HylaFAX runs on the server with the faxq, hfaxd and
>faxgetty processes active all the time. All the versions of WHFC we've
>downloaded still freezes. It appears to be pretty random process on
>all the 5 PC's that I've installed it on..
>

Well, we seem to have whfc 0.3a running *in a fashion* now. What seems
to make the difference for us is to ensure that no faxes are in the 
servers' queue before sending another via whfc.

The user of whfc has found a routine for herself where she waits for the
email notification for each fax before trying to send the next one. (The
'notify' parameter is set to 'always').

I can't say whether it's whfc or the our server setup that is causing
this problem, but it may be worth a test.

Here is a extract from the syslog file which shows what happens when a
fax is sent from whfc when there is something already in the send queue
( I've deleted the hostname and the date to try to fit it on a line ) :-

16:05:00 FaxSend[18442]: SEND FAX: JOB 60 DEST 01736850960 COMMID 00000072
16:05:15 FaxSend[18442]: SEND FAILED: Busy signal detected
16:05:30 FaxGetty[259]: MODEM USROBOTICS SPORTSTER 28800 FAX...[blah,blah] 
16:06:20 HylaFAX[18449]: Filesystem has SysV-style file creation semantics.

So, job 60 still hasn't gone, and another fax is sent from whfc..        

16:06:21 FaxQueuer[224]: SUBMIT JOB 61

Whfc now crashes, and I see later that a zoomie hfaxd process is left on
the server. 

16:08:18 FaxGetty[259]: ANSWER: Can not lock modem device
16:08:21 FaxSend[18455]: MODEM USROBOTICS SPORTSTER 28800 FAX...
16:08:21 FaxSend[18455]: SEND FAX: JOB 60 DEST 01736850960 COMMID 00000073
16:08:37 FaxSend[18455]: SEND FAILED: Busy signal detected
16:08:52 FaxGetty[259]: MODEM USROBOTICS SPORTSTER 28800 FAX...
16:11:40 FaxGetty[259]: ANSWER: Can not lock modem device
16:11:43 FaxSend[18463]: MODEM USROBOTICS SPORTSTER 28800 FAX...
16:11:43 FaxSend[18463]: SEND FAX: JOB 60 DEST 01736850960 COMMID 00000074
16:11:59 FaxSend[18463]: SEND FAILED: Busy signal detected
16:12:14 FaxGetty[259]: MODEM USROBOTICS SPORTSTER 28800 FAX...
16:15:02 FaxGetty[259]: ANSWER: Can not lock modem device
.
.
16:19:11 FaxSend[18545]: SEND FAX: JOB 60 DEST 01736850960 COMMID 00000076
16:20:00 kernel: PPP: ppp line discipline successfully unregistered
16:20:47 FaxQueuer[224]: NOTIFY: bin/notify "doneq/q60" "done" "1:41"
16:20:57 FaxSend[18582]: MODEM USROBOTICS SPORTSTER 28800 FAX...

Job 60 is eventually sent successfully, the next fax is sent from whfc..

16:20:57 FaxSend[18582]: SEND FAX: JOB 61 DEST 01736850960 COMMID 00000077

..and is given the Job number of 61 again. Hope this helps someone,

Cheers,
Phil Watkinson,
Boston, UK.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: "Tony Poole" <tony@warp10.williamsburg.mi.us>
Date: Mon, 14 Apr 1997 07:02:08 -0400
Reply-To: tony@umcc.umich.edu
To: "flexfax@sgi.com
	Uri Shkolnik" <uri@harmonic.co.il>
Subject: Re: WHFC 0.3b
Cc: Hylafax Mailing list <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

On Apr 14,  9:05am, Jonathan Chen wrote:
> Subject: Re: WHFC 0.3b
> On Sat, 12 Apr 1997, Uri Shkolnik wrote:
> > About the problems with whfc - do you run hylafax via inetd or as stand
> > along (with script)?
>
> On my system, HylaFAX runs on the server with the faxq, hfaxd and
> faxgetty processes active all the time. All the versions of WHFC we've
> downloaded still freezes. It appears to be pretty random process on
> all the 5 PC's that I've installed it on..


I second that.  I run flexfax as a daemon, and have lockups that appear random
from PC to PC (if one PC locks up, it always will - if it doesn't, it never
will).

Tony


-- 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: "Tony Poole" <tony@warp10.williamsburg.mi.us>
Date: Mon, 14 Apr 1997 07:22:27 -0400
Reply-To: tony@umcc.umich.edu
To: flexfax@sgi.com
Subject: Re: WHFC 0.3b
Sender: owner-flexfax@celestial.com

On Apr 14,  8:27am, Ulrich Eckhardt wrote:
> Subject: Re: WHFC 0.3b
> Jonathan Chen wrote:
> >
> > On Sat, 12 Apr 1997, Uri Shkolnik wrote:
> > > About the problems with whfc - do you run hylafax via inetd or as stand
> > > along (with script)?
> >
> > On my system, HylaFAX runs on the server with the faxq, hfaxd and
> > faxgetty processes active all the time. All the versions of WHFC we've
> > downloaded still freezes. It appears to be pretty random process on
> > all the 5 PC's that I've installed it on..
>
> i also run faxq and hfaxd stand alone. Do you send documents with
> graphics ?. WHFC does only sporadic updates of it's windows when it
> send data to the server.
>
> I use the PASV-Mode to make data connections to the HylaFAX-Server.
> Could there be a problem ? because the data transfer to the server
> seems relative slow.

My lockups occur way before any data is even attempted to be sent to the
server.
While trying to diagnose this problem, I have been attempting to send data
without graphics from MS Word.

90% of the time anymore, WHFC locks up on me before I can even get a chance
to hit the phonebook button to lookup a number.

The other 10% of the time WHFC locks up either when I do press the phonebook
button, or when I come out of the phonebook.  Sometimes one or both windows
just disappear, and the graphics in the background do not get updated until
I CTRL-ALT-DEL and end the task.

If it doesn't lockup right away after the window pops up, I can make it lockup
by grabbing WHFC's main title bar and move it around on the desktop.

After WHFC locks up, a scan of my Windows directory on the PC reveals three
files that were created - ~fax0000.ps, ~fax0001.ps, and fax.prn.  Fax.prn
is my printer output spool file.  All have an identical size.

Tony


-- 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Uri Shkolnik <uri@harmonic.co.il>
To: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: document conversion script was not found
Date: Mon, 14 Apr 1997 15:54:56 +0300
Sender: owner-flexfax@celestial.com

Hi,


This is very strange to me.

Some of my users may send faxes (via Winflex) without any problems, but other get the error message which attached to this Email.

I had not found any user setting differences.

Any idea ???











----------
> From: Facsimile Agent <fax>
> To: ben@harmonic.co.il
> Subject: facsimile job 10 to 6230151 failed
> Date: Sunday, 13 April, 1997 12:36 PM
> 
> Your facsimile job to 6230151 was not sent because
> the document conversion script was not found.
> 
>     ---- Unsent job status ----
> 
>    Destination: 6230151
>          JobID: 10
>        GroupID: 10
>         Sender: Ben Bloom
>       Mailaddr: ben@harmonic.co.il
> Submitted From: ben.harmonic.co.il
>     Page Width: 215 (mm)
>    Page Length: 279 (mm)
>     Resolution: 196 (lpi)
>         Status: %%[ Error: undefined; OffendingCommand: load ]%%
> 
> Unexpected interpreter error 1.
> Error object: execute0(d84)name(0x14ab1c#299)
> Operand stack at 0x143010:
> 0x14d570: 0x0d name --S------ 0x09da 0x001aeca0 = -C
> 0x14d578: 0x0d name --S------ 0x0995 0x001ae964 = rcu?rveto
> Execution stack at 0x143188:
> 0x14eed8: 0x0f oper --F---e-- 0x0000 0x00031c68 = %interp_exit
> 0x14eee0: 0x12 str  --F-rxe-- 0x0000 0x00000000 = 
> 0x14eee8: 0x03 file --L-rxe-- 0x0001 0x001564d8cat: output error: Broken
pipe
> 
> 
>        Dialogs: 0 (exchanges with remote device)
>          Dials: 0 (consecutive failed calls to destination)
>          Calls: 0 (total phone calls placed)
>          Pages: 0 (pages transmitted)
>       TotPages: 0 (total pages to transmit)
>       Attempts: 0 (attempts to send current page)
>         Dirnum: 0 (directory of next page to send)
> 
>     ---- Documents submitted for transmission ----
> 
> The following documents were submitted for transmission and are
> available on the server for reuse until they are automatically
> purged when this job is removed.  Documents may also be manually
> removed using the faxrm command; consult faxrm(1) for information.
> 
> Filename                 Size Type
> docq/doc12.ps.10        19554 PostScript

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Doug Monsky <monsky@bellsouth.net>
To: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: Font's changed during ps2fax?
Date: Mon, 14 Apr 1997 09:48:58 -0400
Sender: owner-flexfax@celestial.com

Thanks to the help by Tim Rice, I am now able to use HylaFAX.!!!  I am able to send all types of documents.  However I created a PostScript file in Lotus and am using it as a form.  There are two fonts in this document, Courier and Helvetica-Bold.  When the documents are faxed the Courier font is substituted to a non proportional font.  At first I thought my fontmap was wrong.  But when I look at the files in the docq directory with ghostview, the documents show a proportional courier font being used.  Can ps2fax be causing this problem?  I did not find any tmpfile that contains the actual image that sendfax uses, does this use the file in docq?  I have tried different Fontmaps and fonts but the proportional fonts keep getting changed.  I even downloaded the documents to a win95 workstation with ghostview and the documents show proportional fonts.  I'm so close I can taste it.  Any help would be appreciated.  BTW .. HylaFAX is an awesome product.

My setup:
SCO Openserver 5.0.2
HylaFAX 4.0 Binary from ftp.sgi.com
Ghostscript 3.5.3 Binary from Skunkware
Fonts from prep.ai.mit.edu

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 14 Apr 97 14:30:18 EDT
From: glenn@aoi.ultranet.com (Glenn Burkhardt)
To: flexfax@sgi.com
Subject: Re: Need Info on USR/Multitech
Sender: owner-flexfax@celestial.com

> Subject: Need Info on USR/Multitech
> 
> Hi folks,
> 
> ...in using HylaFAX v4.0pl1 build from source an a Linux box, currently
> with a USR Sportster 33.6.
> 
> ...it works very well...Line Speeds up to 115.2Kbd and RTS/CTS are not
> a problem...on the other hand, it looks like it does not support
> 2D-encoding of data.
> 
> My questions:	- does anyone know when/if USR will become 
> 		  enabled for 2DMR?
> 	
> 		- do the Multitech modems support 2DMR?
> 
> TIA,
>    Fred
> 
> ---
> Because the FAQ reports the USR Sportsters as unable to support high line
> speeds and problems with RTS/CTS....here's the info on my
> current Firmware/DSP revision:
> 
> ati7                                    
> Configuration Profile...                
>                                         
> Product type           US/Canada External
> Options                V32bis,V.34+     
> Fax Options            Class 1/Class 2.0
> Line Options           Caller ID, Distinctive Ring
> Clock Freq             92.0Mhz
> Eprom                  256k                                                     
> Ram                    64k                                                      
>                                                                                 
> EPROM date             8/20/96                                                  
> DSP date               8/20/96                                                  
>                                                                                 
> EPROM rev              3.10                                                     
> DSP rev                3.10                                                     
>  
> ....and fax capabilies:
> 
> at+fclass=2.0                                        
> OK                                                   
> at+fcc=?                                             
> (0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)
> 
> 
Surprised to hear this - I had thought that when USR went to Class 2.0 they
also went to 2D encoding.

At any rate, the MultiTech ZDX series supports 2D, and the Zoom Telephonics
modems support 2D (at least the older, VFX 14400 models).

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 15 Apr 1997 08:51:43 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Ulrich Eckhardt <uli@rgw-express.de>
cc: Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: WHFC 0.3b
Sender: owner-flexfax@celestial.com

On Mon, 14 Apr 1997, Ulrich Eckhardt wrote:

> Hi,
> 
> i also run faxq and hfaxd stand alone. Do you send documents with
> graphics ?. WHFC does only sporadic updates of it's windows when it
> send data to the server.

Most of the stuff that we send are Word documents. I've no idea just
how big they get after passing thru' the Postscript printer driver;
but I can say that one can wait for 5 minutes (and I do mean 5 minutes
- by the clock) and nothing happens - then we kill the job.

> I use the PASV-Mode to make data connections to the HylaFAX-Server.
> Could there be a problem ? because the data transfer to the server
> seems relative slow.

Well, using `sendfax -h' from other hosts on our network to our
HylaFAX server host seem to go thru' at an adequate rate (on the other
hand, the data is zipped before it is sent..).
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Steve Williams <steve@genie96.com>
Subject: Re: WHFC 0.3b
To: jonc@pinnacle.co.nz (Jonathan Chen)
Date: Mon, 14 Apr 1997 18:10:38 -0600 (MDT)
Cc: uli@rgw-express.de, flexfax@sgi.com
Sender: owner-flexfax@celestial.com

> 
> On Mon, 14 Apr 1997, Ulrich Eckhardt wrote:
> 
> > Hi,
> > 
> > i also run faxq and hfaxd stand alone. Do you send documents with
> > graphics ?. WHFC does only sporadic updates of it's windows when it
> > send data to the server.
> 
> Most of the stuff that we send are Word documents. I've no idea just
> how big they get after passing thru' the Postscript printer driver;
> but I can say that one can wait for 5 minutes (and I do mean 5 minutes
> - by the clock) and nothing happens - then we kill the job.
> 
> > I use the PASV-Mode to make data connections to the HylaFAX-Server.
> > Could there be a problem ? because the data transfer to the server
> > seems relative slow.
> 
> Well, using `sendfax -h' from other hosts on our network to our
> HylaFAX server host seem to go thru' at an adequate rate (on the other
> hand, the data is zipped before it is sent..).


Howdy,

I have been playing around with WHFC myself at work here.  I have whfc 
installed on a samba mounted drive on my PC, with the public phone book there
as well.  My PC is running Win95.

Hylafax is running in the "daemon" mode, not being started from inetd.

I too am experiencing the "Hanging".  I typically am sending no graphics 
from MS Word 7.  I have the printer driver set as per the previous sets of
email.

I figured I'd throw this out for consideration.  It might set off an alarm 
in someone's head.

The "Offline mode spool directory is " C:\TMP\FAXSPOOL\

The spool file for me is C:\TMP\FAXOUT.PS

Initially, that file does not exist, nor does any other *.ps file.

I print from MS Word to the appropriate printer, and magically, WHFC Pops up.
At this time, the directory looks like:

FAXOUT   PS         53,070  04-14-97  5:24p FAXOUT.PS
~FAX0000 PS         53,070  04-14-97  5:23p ~fax0000.ps
~FAX0001 PS         53,070  04-14-97  5:24p ~fax0001.ps

Now, this looks a bit strange to me, I can understand there being one copy 
of the Postscript output, but Two Copies???

It is at this point that things hang.  It seems to be more time
related than anything else.  I can move the window around, pull up the 
address book, switch to another application.

About 5 seconds later, WHFC will hang.  I read the WWW page, & the FAQ in
there stated that it may have to do with the sockets class ( or some 
such thing ), but up to this point I can't imagine anything is being done
over the network.

Just to make sure that the network wasn't the problem, I switched to Offline
mode.  

The identical thing happens.  The three files show up in a directory listing,
and after about 4-5 seconds, the window has the appearance of "Shifting"
down" on the screen by about the width of the BLUE Windoze title bar, then
it hangs.

Just to make sure it wasn't some bogus DLL that is on my system, I downloaded
the statically linked version of WHFC.  No dice, exactly the same thing.

This is very easily repeated on my system.  If a debug version of WHFC
was available, with logging of what it is doing, I would be more than 
willing to participate in an effort to resolve this problem.

Thanks,
-- 
	Steve Williams, Calgary, Alberta, Canada
	Genie Computer Systems Inc.
	steve@genie96.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: "Andrew S. Howell" <andy@tibco.com>
Cc: flexfax@sgi.com
Subject: Re: Page Width..Still a problem
From: Phil Abercrombie <phil@comp.vuw.ac.nz>
Date: 15 Apr 1997 13:46:58 +1200
Lines: 42
Sender: owner-flexfax@celestial.com


"Andrew S. Howell" <andy@tibco.com> writes:

> I've been trying to get FrameMaker ps docs to work. For some other
> files, someone mentioned using FIXEDMEDIA in ps2fax. Tried this, but
> then the FrameMaker doc spits out a message that it can't set the page
> size. I think I need to use setpagedevice to silently ignore the page
> size change request, but I'm not sure how to do this. Maybe I need to
> read Adobe's PostScript Languge Reference Manual 15 more times and it
> will sink in....
> 
> Anyone have any clues ? 


We hit this problem trying to send FrameMaker documents too.  I made
the following minimal change to ps2fax.gs, which causes setpagedevice
silently to ignore absolutely everything.  Possibly overkill, but it
made that problem go away for good.

I hope a ghostscript expert out there will tell us what we _ought_ to
do.


# <PJA> 16-Jul-1996
# This sed makes setpagedevice a no-op so that 
# postscript from frame can be faxed without trouble
# (It had been explicity setting the page to A4 size, which 
# caused the tiff driver to output shorter scanlines).

$CAT $fil |
$SED -e '1 i\
/setpagedevice {pop} def
' |
 $PS -q \
    -sDEVICE=$device \
    -dNOPAUSE \
    -dSAFER=true \
    -sPAPERSIZE=$paper \
    -r204x$vres \
    "-sOutputFile=$out" \
    -


From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 15 Apr 1997 04:06:07 -0400 (EDT)
From: High Mercury <merc@icanect.net>
To: flexfax@sgi.com
Subject: squished faxes when receiving a fax
Sender: owner-flexfax@celestial.com


I am using a multitech2834MR modem to receive faxes and when I receive
a fax using 4.0pl1, they only take up half the page. Here is the log of the
reception:

Apr 15 03:18:59.92: [15867]: <-- [4:ATA\r]
Apr 15 03:19:08.65: [15867]: --> [5:+FCON]
Apr 15 03:19:08.66: [15867]: ANSWER: FAX CONNECTION
Apr 15 03:19:08.70: [15867]: RECV FAX: begin
Apr 15 03:19:13.85: [15867]: --> [28:+FTSI:"          xxxxxxxxxxx"]
Apr 15 03:19:13.85: [15867]: REMOTE TSI "xxxxxxxxxxx"
Apr 15 03:19:13.85: [15867]: --> [21:+FDCS:0,5,0,2,0,0,0,1]
Apr 15 03:19:13.85: [15867]: REMOTE wants 14400 bit/s
Apr 15 03:19:13.85: [15867]: REMOTE wants page width 1728 pixels in 215 mm
Apr 15 03:19:13.85: [15867]: REMOTE wants unlimited page length 
Apr 15 03:19:13.85: [15867]: REMOTE wants 3.85 line/mm
Apr 15 03:19:13.85: [15867]: REMOTE wants 1-D MR
Apr 15 03:19:13.85: [15867]: REMOTE wants 1-D MR
Apr 15 03:19:13.85: [15867]: --> [2:OK]
Apr 15 03:19:13.85: [15867]: <-- [7:AT+FDR\r]
Apr 15 03:19:15.35: [15867]: --> [5:+FCFR]
Apr 15 03:19:15.35: [15867]: --> [28:+FTSI:"          xxxxxxxxxxx"]
Apr 15 03:19:15.35: [15867]: REMOTE TSI "xxxxxxxxxxx"
Apr 15 03:19:15.35: [15867]: --> [21:+FDCS:0,5,0,2,0,0,0,1]
Apr 15 03:19:15.35: [15867]: REMOTE wants 14400 bit/s
Apr 15 03:19:15.35: [15867]: REMOTE wants page width 1728 pixels in 215 mm
Apr 15 03:19:15.35: [15867]: REMOTE wants unlimited page length 
Apr 15 03:19:15.35: [15867]: REMOTE wants 1-D MR
Apr 15 03:19:16.04: [15867]: --> [7:CONNECT]
Apr 15 03:19:16.04: [15867]: RECV: begin page
Apr 15 03:19:16.04: [15867]: RECV: send trigger 022
Apr 15 03:19:16.04: [15867]: <-- data [1]
Apr 15 03:19:34.41: [15867]: RECV: 32763 bytes of data, 898 total lines
Apr 15 03:19:35.55: [15867]: RECV: 1446 bytes of data, 1058 total lines
Apr 15 03:19:35.56: [15867]: --> [18:+FPTS:1,1058,0,0,0]
Apr 15 03:19:36.76: [15867]: --> [6:+FET:2]
Apr 15 03:19:36.78: [15867]: RECV recv EOP (no more pages or documents)
Apr 15 03:19:36.78: [15867]: --> [2:OK]
Apr 15 03:19:36.78: [15867]: RECV send MCF (message confirmation)
3, INF, 3.85 line/mm, 1-D MR
2227, route to <unspecified>, 1 pages in 0:28
Apr 15 03:19:36.83: [15867]: <-- [7:AT+FDR\r]
Apr 15 03:19:39.68: [15867]: --> [7:+FHNG:0]

I've noticed that it is only squished when I receive the fax in standard mode
(not fine).  When I receive the fax in fine mode and receive it, it takes up
most of the page (except for about a one inch solid black strip towards the 
very bottom).  However, when I receive the fax in standard it takes up about 
half the page with the rest of the page totally black.  I have tried putting
in the Class2DDISCmd: AT+FDIS command in the per modem config files but that
has not affected the received fax.  I send faxes through this modem in both 
standard and fine mode to a fax machine and they take up the whole page like 
they should.  But when I receive a fax in standard mode it only takes up 
about half the page.  

Anyone have any ideas on how to fix this problem???

thanks

merc 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 15 Apr 1997 16:06:30 +0800 (SST)
From: Mathias Koerber <mathias@staff.singnet.com.sg>
Reply-To: mathias@staff.singnet.com.sg
To: Flexfax Mailing List <flexfax@sgi.com>
cc: Matthias.Apitz@SOFTCON.de
Subject: Still problems with 4.0 and Rackmount Zyxel..
X-Disclaimer: I don't speak for anyone except for myself (and to myself sometimes)
Organization: SingNet
Sender: owner-flexfax@celestial.com

Thanx to Matthias Apitz for the

hint with '@'. I took that our from the dialrules file,
and at least now the modem talks to the faxmachine.
The '@' seems to work fine on the standalone ZyXel though
(I have used that for years on a nother server..)

Also for the ATS7=120...

But now I constantly get unspecified transmit errors (code 20) in phase B..

Note: I also tried adding 
	Class2DDISCmd:           AT+FDIS
but it didn't help..

It seems something to do with the encoding selection, but not being a fax-guru
I don' understand this..

Can anyone help??

here is the session log:

	Apr 15 15:22:38.14: [17350]: SESSION BEGIN 00000020 654753273
	Apr 15 15:22:38.14: [17350]: SEND FAX: JOB 10 DEST 4753273 COMMID 00000020
	Apr 15 15:22:38.14: [17350]: DELAY 2600 ms
	Apr 15 15:22:40.75: [17350]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
	Apr 15 15:22:40.97: [17350]: --> [2:OK]
	Apr 15 15:22:40.97: [17350]: <-- [22:ATS8=2S7=120&H3&D2&C1\r]
	Apr 15 15:22:40.99: [17350]: --> [2:OK]
	Apr 15 15:22:40.99: [17350]: <-- [14:AT+FCLASS=2.0\r]
	Apr 15 15:22:41.12: [17350]: --> [2:OK]
	Apr 15 15:22:41.12: [17350]: <-- [9:AT+FLO=2\r]
	Apr 15 15:22:41.13: [17350]: --> [2:OK]
	Apr 15 15:22:41.13: [17350]: <-- [9:AT+FPP=0\r]
	Apr 15 15:22:41.14: [17350]: --> [2:OK]
	Apr 15 15:22:41.14: [17350]: <-- [9:AT+FBO=0\r]
	Apr 15 15:22:41.15: [17350]: --> [2:OK]
	Apr 15 15:22:41.15: [17350]: <-- [10:AT+FCT=30\r]
	Apr 15 15:22:41.16: [17350]: --> [2:OK]
	Apr 15 15:22:41.16: [17350]: <-- [15:AT+FNR=1,1,1,1\r]
	Apr 15 15:22:41.17: [17350]: --> [2:OK]
	Apr 15 15:22:41.17: [17350]: <-- [9:AT+FIE=0\r]
	Apr 15 15:22:41.18: [17350]: --> [2:OK]
	Apr 15 15:22:41.18: [17350]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
	Apr 15 15:22:41.20: [17350]: --> [2:OK]
	Apr 15 15:22:41.20: [17350]: <-- [7:ATM1L5\r]
	Apr 15 15:22:41.21: [17350]: --> [2:OK]
	Apr 15 15:22:41.21: [17350]: <-- [14:AT+FCLASS=2.0\r]
	Apr 15 15:22:41.44: [17350]: --> [2:OK]
	Apr 15 15:22:41.44: [17350]: <-- [9:AT+FLO=2\r]
	Apr 15 15:22:41.55: [17350]: --> [2:OK]
	Apr 15 15:22:41.55: [17350]: <-- [9:AT+FPP=0\r]
	Apr 15 15:22:41.66: [17350]: --> [2:OK]
	Apr 15 15:22:41.66: [17350]: <-- [9:AT+FBO=0\r]
	Apr 15 15:22:41.77: [17350]: --> [2:OK]
	Apr 15 15:22:41.77: [17350]: <-- [10:AT+FCT=30\r]
	Apr 15 15:22:41.88: [17350]: --> [2:OK]
	Apr 15 15:22:41.88: [17350]: <-- [15:AT+FNR=1,1,1,1\r]
	Apr 15 15:22:41.99: [17350]: --> [2:OK]
	Apr 15 15:22:41.99: [17350]: <-- [9:AT+FIE=0\r]
	Apr 15 15:22:42.10: [17350]: --> [2:OK]
	Apr 15 15:22:42.10: [17350]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
	Apr 15 15:22:42.22: [17350]: --> [2:OK]
	Apr 15 15:22:42.22: [17350]: <-- [17:AT+FLI="SingNet"\r]
	Apr 15 15:22:42.34: [17350]: --> [2:OK]
	Apr 15 15:22:42.35: [17350]: DIAL 4753273
	Apr 15 15:22:42.35: [17350]: <-- [12:ATDT4753273\r]
	Apr 15 15:22:58.79: [17350]: --> [4:+FCO]
	Apr 15 15:22:58.79: [17350]: --> [18:+FNF:BC 53 01 60  ]
	Apr 15 15:22:58.79: [17350]: REMOTE NSF "BC 53 01 60"
	Apr 15 15:22:58.79: [17350]: --> [26:+FCI:                     ]
	Apr 15 15:22:58.79: [17350]: REMOTE CSI ""
	Apr 15 15:22:58.79: [17350]: --> [20:+FIS:1,3,0,2,1,0,0,0]
	Apr 15 15:22:58.79: [17350]: --> [2:OK]
	Apr 15 15:22:58.79: [17350]: REMOTE best rate 9600 bit/s
	Apr 15 15:22:58.79: [17350]: REMOTE max page width 1728 pixels in 215 mm
	Apr 15 15:22:58.79: [17350]: REMOTE max unlimited page length 
	Apr 15 15:22:58.79: [17350]: REMOTE best vres 7.7 line/mm
	Apr 15 15:22:58.79: [17350]: REMOTE best format 2-D MR
	Apr 15 15:22:58.79: [17350]: REMOTE best 0 ms/scanline
	Apr 15 15:22:58.79: [17350]: USE 9600 bit/s
	Apr 15 15:22:58.79: [17350]: USE 0 ms/scanline
	Apr 15 15:22:58.79: [17350]: SEND file "docq/doc10.cover;30"
	Apr 15 15:22:58.79: [17350]: USE page width 1728 pixels in 215 mm
	Apr 15 15:22:58.79: [17350]: USE unlimited page length 
	Apr 15 15:22:58.79: [17350]: USE 3.85 line/mm
	Apr 15 15:22:58.79: [17350]: USE 1-D MR
	Apr 15 15:22:58.79: [17350]: <-- [23:AT+FIS=0,3,0,2,0,0,0,0\r]
	Apr 15 15:23:05.96: [17350]: --> [7:+FHS:20]
	Apr 15 15:23:05.96: [17350]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
	Apr 15 15:23:05.96: [17350]: --> [2:OK]
	Apr 15 15:23:05.96: [17350]: <-- [7:AT+FDT\r]
	Apr 15 15:23:06.36: [17350]: --> [10:NO CARRIER]
	Apr 15 15:23:06.36: [17350]: MODEM No carrier
	Apr 15 15:23:06.36: [17350]: SEND: Unspecified Transmit Phase B error; Giving up after 3 attempts to send same page "docq/doc10.cover;30", dir
	num 0
	Apr 15 15:23:06.36: [17350]: <-- [5:ATH0\r]
	Apr 15 15:23:06.67: [17350]: --> [2:OK]
	Apr 15 15:23:06.67: [17350]: SESSION END


and here the config file:

	CountryCode:            65
	AreaCode:               ""
	FAXNumber:              +65.4767112
	LongDistancePrefix:     02
	InternationalPrefix:    001
	DialStringRules:        "etc/dialrules"
	ServerTracing:          11
	SessionTracing:         11
	RecvFileMode:           0600
	LogFileMode:            0600
	DeviceMode:             0600
	RingsBeforeAnswer:      1
	SpeakerVolume:          medium
	GettyArgs:              "-h %l dx_%s"
	LocalIdentifier:        SingNet
	TagLineFont:            etc/lutRS18.pcf
	TagLineFormat:          "From %%l|%c|Page %%p of %%t"
	NoCarrierRetrys:        3
	MaxRecvPages:           25
	#
	#
	# Modem-related stuff: should reflect modem command interface
	# and hardware connection/cabling (e.g. flow control).
	#
	ModemType:              Class2.0        # use class 2.0 interface
	ModemRate:              38400           # 38.4 works fine
	ModemFlowControl:       rtscts          # default
	#
	ModemNoFlowCmd:         AT&H0           # disable flow control
	ModemHardFlowCmd:       AT&H3           # hardware flow control
	ModemSoftFlowCmd:       AT&H4           # software flow control
	ModemSetupDTRCmd:       AT&D2           # DTR off causes modem to hang up
	ModemSetupDCDCmd:       AT&C1           # DCD tracks carrier
	#
	ModemSetupAACmd:        AT+FAA=1        # enable in current class
	#
	# Additional reset commands:
	#
	# &B1     DTE-DCE rate is fixed at DTE setting
	# &N0     Auto-negotiate highest possible DCE-DCE link rate
	# &S0     DSR always on
	# *F0     Deny remote configuration
	# S18=2   Receive at 38400
	# S38.3=1 DCD on/off sequence follows UNIX standard; also
	#         fix receiving baud rate at S18 value
	# S39=0   (avoid Class 2 compatibility hacks)
	# 
	ModemResetCmds:         AT&B1&N0&S0*F0S18=2S38.3=1S39=0
	#
	ModemWaitTimeCmd:       ATS7=120
	ModemDialCmd:           ATDT%s          # no '@' 'cuz then busy not recognized
	NoCarrierRetrys:        3               # retry 3 times on no carrier
	#
	ModemSetVolumeCmd:      "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
	#
	# Caller ID configuration setup.
	#
	#QualifyCID:            etc/cid         # CID access control list file
	#CIDNumber:             "CALLER NUMBER: " # pattern string for phone number info
	#CIDName:               "CALLER NAME: " # pattern string for identity info
	#
	PagerSetupCmds:         AT&K0&N15       # use V.22 at 1200 bps (PageNet)
	#
	# Rev 6.1x firmware have a bug in the ECM support so
	# explicitly disable it's use.  To re-enable its use just
	# comment out the following line.
	#
	Class2DCCQueryCmd:      "!(0,1),(0-5),(0-4),(0-2),(0,1),(0),(0),(0-7)"
	#Class2DDISCmd:           AT+FDIS

This is under Hylafax 4.0pl1, on Linux 2.0.29 with a Zyxel Rackmounted Modem

AT+FMDL?, AT+FREV? and AT+FMFR? all return:
	U1496R+  V 6.14 

Any help is appreciated..

Mathias Koerber	  | Tel: +65 / 471 9820    |   mathias@staff.singnet.com.sg
SingNet NOC	  | Fax: +65 / 475 3273    |            mathias@koerber.org
Q'town Tel. Exch. | PGP: Keyid: 768/25E082BD, finger mathias@singnet.com.sg
2 Stirling Rd     |      1A 8B FC D4 93 F1 9A FC BD 98 A3 1A 0E 73 01 65
S'pore 148943     | Disclaimer: I speak only for myself
* Eifersucht ist eine Leidenschaft, die mit Eifer sucht, was Leiden schafft *

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 15 Apr 1997 17:37:32 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: flexfax@sgi.com
Subject: help: need dialrules for ZA
Sender: owner-flexfax@celestial.com

Hi folks,

...i've got some trouble setting up the proper dialrules for my
environment.

The fax numbers are comming out of a database, where they don't have to
fit into a cannonical format (sigh)...
It is quite common, that the numbers are stored with brackets in it,
which is what you find here on a business card quite often.

...the dialrules that ship with HylaFAX v4.0pl1 don't handle this
properly.

Help anyone? 
I'll offer a greeting card from SA as a reward ;-)

TIA,
   fred

...here is what the dialrules SHOULD do:
	
	Country-Code: 27
	   Aera-Code: 11 (i.e. Johannesburg)
	  Long-Dist.: 0
	   Internat.: 09


	-> dial "(011)123-456" should result in:
	
		cannonically: +2711123456
		  dialstring: 123456

	-> dial "(021)123-456" (Capetown) should result in:

		cannonically: +2721123456
		  dialstring: 021123456

	-> dial "+49 (171) 12345" (Germany) should result in:

		cannonically: +4917112345
		  dialstring: 094917112345

...sometime you find even this:

	-> dial "+27 (0)11 123-4567" (Johannesburg) should result in:

		cannonically: +27111234567
		  dialstring: 1234567

	-> dial "+27 (0)21 123-4567 (Capetown) should result in:

		cannonically: +27211234567
		  dialstring: 0211234567

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 15 Apr 1997 18:40:17 +0200
From: "Ing. Richard Lutsch" <lut@porsche.co.at>
Reply-To: lut@porsche.co.at
Organization: Porsche Informatik
To: flexfax@sgi.com
CC: lut@comserv.szg.porsche.co.at
Subject: No response to MPS repeated 3 times
Sender: owner-flexfax@celestial.com

HylaFAX v4.0pl0 under AIX 4.1 (smitt installable version from
www.bull.de); GVC 14400 (MODEM EXAR ROCKWELL 144DP/E.C Version 7.1)

With some fax machines I get the following error:

"No response to MPS repeated 3 times (code 52)"

I looked to the FAQ, but didn't find something. Please, don't complain
about me, if i overlooked something in the FAQ :-)

Regards,

   Richard

P.S: I tried the same modem one year ago with hylafax Version 3.x and
AIX 3.2.5 with xlC and had the same problem with the same fax machine.
Apr 15 18:15:58.73: [24544]: SESSION BEGIN 00000019 004366227
Apr 15 18:15:58.73: [24544]: SEND FAX: JOB 30 DEST 27 COMMID 00000019
Apr 15 18:15:58.73: [24544]: DELAY 2600 ms
Apr 15 18:16:01.34: [24544]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 15 18:16:01.94: [24544]: --> [2:OK]
Apr 15 18:16:01.94: [24544]: <-- [30:ATS8=2S7=60&S1\G0\Q4\X1&D2&C1\r]
Apr 15 18:16:02.19: [24544]: --> [2:OK]
Apr 15 18:16:02.19: [24544]: <-- [12:AT+FCLASS=2\r]
Apr 15 18:16:02.42: [24544]: --> [2:OK]
Apr 15 18:16:02.42: [24544]: <-- [10:AT+FTBC=0\r]
Apr 15 18:16:02.65: [24544]: --> [5:ERROR]
Apr 15 18:16:02.65: [24544]: MODEM Command error
Apr 15 18:16:02.65: [24544]: <-- [10:AT+FBOR=0\r]
Apr 15 18:16:02.89: [24544]: --> [2:OK]
Apr 15 18:16:02.89: [24544]: <-- [13:AT+FPHCTO=30\r]
Apr 15 18:16:03.12: [24544]: --> [5:ERROR]
Apr 15 18:16:03.12: [24544]: MODEM Command error
Apr 15 18:16:03.12: [24544]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 15 18:16:03.36: [24544]: --> [2:OK]
Apr 15 18:16:03.36: [24544]: <-- [7:ATL1M1\r]
Apr 15 18:16:03.59: [24544]: --> [2:OK]
Apr 15 18:16:03.62: [24544]: <-- [12:AT+FCLASS=2\r]
Apr 15 18:16:03.95: [24544]: --> [2:OK]
Apr 15 18:16:03.95: [24544]: <-- [10:AT+FTBC=0\r]
Apr 15 18:16:04.28: [24544]: --> [5:ERROR]
Apr 15 18:16:04.28: [24544]: MODEM Command error
Apr 15 18:16:04.28: [24544]: <-- [10:AT+FBOR=0\r]
Apr 15 18:16:04.61: [24544]: --> [2:OK]
Apr 15 18:16:04.62: [24544]: <-- [13:AT+FPHCTO=30\r]
Apr 15 18:16:04.95: [24544]: --> [5:ERROR]
Apr 15 18:16:04.95: [24544]: MODEM Command error
Apr 15 18:16:04.95: [24544]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 15 18:16:05.29: [24544]: --> [2:OK]
Apr 15 18:16:05.29: [24544]: <-- [29:AT+FLID="Porsche Informatik"\r]
Apr 15 18:16:05.63: [24544]: --> [2:OK]
Apr 15 18:16:05.63: [24544]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,0\r]
Apr 15 18:16:05.97: [24544]: --> [2:OK]
Apr 15 18:16:05.98: [24544]: DIAL 27
Apr 15 18:16:05.98: [24544]: <-- [8:ATDT27@\r]
Apr 15 18:16:24.70: [24544]: --> [5:+FCON]
Apr 15 18:16:24.71: [24544]: --> [112:+FNSF: 00 00 11 80 00 80 5B 10 45 58 54 45 52 4E 41 2E 20 20 20 20 20 20 20 20 01 0F 00 27 00 80 80 80 02 01 01 ]
Apr 15 18:16:24.71: [24544]: REMOTE NSF " 00 00 11 80 00 80 5B 10 45 58 54 45 52 4E 41 2E 20 20 20 20 20 20 20 20 01 0F 00 27 00 80 80 80 02 01 01"
Apr 15 18:16:24.84: [24544]: --> [29:+FCSI: "      43 662 4670 27"]
Apr 15 18:16:24.84: [24544]: REMOTE CSI "43 662 4670 27"
Apr 15 18:16:24.84: [24544]: --> [22:+FDIS: 1,3,0,2,0,2,0,5]
Apr 15 18:16:24.85: [24544]: --> [2:OK]
Apr 15 18:16:24.85: [24544]: REMOTE best rate 9600 bit/s
Apr 15 18:16:24.85: [24544]: REMOTE max page width 1728 pixels in 215 mm
Apr 15 18:16:24.85: [24544]: REMOTE max unlimited page length 
Apr 15 18:16:24.85: [24544]: REMOTE best vres 7.7 line/mm
Apr 15 18:16:24.85: [24544]: REMOTE best format 1-D MR
Apr 15 18:16:24.85: [24544]: REMOTE supports T.30 Annex C, half duplex ECM
Apr 15 18:16:24.85: [24544]: REMOTE best 20 ms/scanline
Apr 15 18:16:24.85: [24544]: USE 9600 bit/s
Apr 15 18:16:24.85: [24544]: USE 20 ms/scanline
Apr 15 18:16:24.85: [24544]: SEND file "docq/doc30.cover;00"
Apr 15 18:16:24.86: [24544]: USE page width 1728 pixels in 215 mm
Apr 15 18:16:24.86: [24544]: USE unlimited page length 
Apr 15 18:16:24.86: [24544]: USE 3.85 line/mm
Apr 15 18:16:24.86: [24544]: USE 1-D MR
Apr 15 18:16:24.86: [24544]: <-- [7:AT+FDT\r]
Apr 15 18:16:31.00: [24544]: --> [22:+FDCS: 0,3,0,2,0,0,0,5]
Apr 15 18:16:32.69: [24544]: --> [7:CONNECT]
Apr 15 18:16:32.69: [24544]: SEND wait for XON
Apr 15 18:16:32.69: [24544]: --> [1:]
Apr 15 18:16:32.69: [24544]: SEND begin page
Apr 15 18:16:32.70: [24544]: <-- data [1028]
Apr 15 18:16:32.70: [24544]: <-- data [1036]
Apr 15 18:16:32.70: [24544]: <-- data [1030]
Apr 15 18:16:32.70: [24544]: <-- data [1036]
Apr 15 18:16:32.71: [24544]: <-- data [1050]
Apr 15 18:16:32.71: [24544]: <-- data [1042]
Apr 15 18:16:34.31: [24544]: <-- data [1050]
Apr 15 18:16:34.31: [24544]: <-- data [1051]
Apr 15 18:16:36.01: [24544]: <-- data [1043]
Apr 15 18:16:36.01: [24544]: <-- data [1044]
Apr 15 18:16:37.72: [24544]: <-- data [1036]
Apr 15 18:16:37.73: [24544]: <-- data [1025]
Apr 15 18:16:39.44: [24544]: <-- data [570]
Apr 15 18:16:39.45: [24544]: SENT 12858 bytes of data
Apr 15 18:16:39.45: [24544]: <-- data [2]
Apr 15 18:16:43.26: [24544]: SEND end page
Apr 15 18:16:43.53: [24544]: --> [2:OK]
Apr 15 18:16:43.53: [24544]: SEND send MPS (more pages, same document)
Apr 15 18:16:43.53: [24544]: <-- [9:AT+FET=0\r]
Apr 15 18:17:01.23: [24544]: --> [9:+FHNG: 52]
Apr 15 18:17:01.23: [24544]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52)
Apr 15 18:17:01.23: [24544]: <-- [5:ATH0\r]
Apr 15 18:17:01.23: [24544]: --> [2:OK]
Apr 15 18:17:01.24: [24544]: SESSION END

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 16 Apr 1997 08:37:16 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: Steve Williams <steve@genie96.com>
CC: Jonathan Chen <jonc@pinnacle.co.nz>, flexfax@sgi.com, tony@umcc.umich.edu
Subject: Re: WHFC 0.3b Lockups
Sender: owner-flexfax@celestial.com

Steve Williams wrote:
> Howdy,
> 
> I have been playing around with WHFC myself at work here.  I have whfc
> installed on a samba mounted drive on my PC, with the public phone book there
> as well.  My PC is running Win95.
> 
> Hylafax is running in the "daemon" mode, not being started from inetd.
> 
> I too am experiencing the "Hanging".  I typically am sending no graphics
> from MS Word 7.  I have the printer driver set as per the previous sets of
> email.
> 
> I figured I'd throw this out for consideration.  It might set off an alarm
> in someone's head.
> 
...
> At this time, the directory looks like:
> 
> FAXOUT   PS         53,070  04-14-97  5:24p FAXOUT.PS
> ~FAX0000 PS         53,070  04-14-97  5:23p ~fax0000.ps
> ~FAX0001 PS         53,070  04-14-97  5:24p ~fax0001.ps
> 
> Now, this looks a bit strange to me, I can understand there being one copy
> of the Postscript output, but Two Copies???

Hi,

thanks for this hint, i think i have found the problem now. The
printer manager sends two messages of the type WM_SPOOLERSTATUS, so
that whfc trys to open the sendfax dialog twice, or even reconnect
to the server during a running transmission which ends sometimes in 
strange behaviour of whfc and the server (and it may lead to the
problem of the "command error, expecting command token" bug).

I have uploaded a fixed pre release (dynamic only) on 
ftp://ftp.rgw-express.de/pub/whfc/whfc.zip but i have not updated the
web-page, because i have tested it only under Win95 (and will do some
rewritings). 

I will try to get out a better version on friday. However if 
someone has some time to test it, if it runs on his system 
(and send me a E-Mail if it works or not) this would help me.

Uli

-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 16 Apr 1997 16:03:11 +0800 (SST)
From: Mathias Koerber <mathias@staff.singnet.com.sg>
Reply-To: mathias@staff.singnet.com.sg
To: Flexfax Mailing List <flexfax@sgi.com>
Subject: And still problems with rackmounted Zyxel.. :-(
X-Disclaimer: I don't speak for anyone except for myself (and to myself sometimes)
Organization: SingNet
Sender: owner-flexfax@celestial.com

And I still got problems.. I got a tip to change the modem
from class 2.0 to class 2, but even that didn't help.
The only dif was that in class 2 it hangs up with FHNG:20
after the AT+FDIS command instead of with FHS:20 after
the FDT command...

Now  here I have TWO session traces.

The first one is from my GOOD (standalone Zyxel 1496e on server 1)
to my faxmachine (a Nucleus) using hylafax 3.0pl1..:

	MODEM ZYXEL U1496S/V 6.12 P

Apr 16 12:05:55.35: [ 8779]: SESSION BEGIN
Apr 16 12:05:55.35: [ 8779]: DELAY 2600 ms
Apr 16 12:05:57.97: [ 8779]: <-- [43:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0]
Apr 16 12:05:58.29: [ 8779]: --> [2:OK]
Apr 16 12:05:58.29: [ 8779]: <-- [20:ATS8=2S7=60&H3&D2&C1]
Apr 16 12:05:58.41: [ 8779]: --> [2:OK]
Apr 16 12:05:58.41: [ 8779]: <-- [13:AT+FCLASS=2.0]
Apr 16 12:05:58.64: [ 8779]: --> [2:OK]
Apr 16 12:05:58.64: [ 8779]: <-- [8:AT+FLO=2]
Apr 16 12:05:58.76: [ 8779]: --> [2:OK]
Apr 16 12:05:58.76: [ 8779]: <-- [8:AT+FPP=0]
Apr 16 12:05:58.88: [ 8779]: --> [2:OK]
Apr 16 12:05:58.88: [ 8779]: <-- [8:AT+FBO=0]
Apr 16 12:05:59.00: [ 8779]: --> [2:OK]
Apr 16 12:05:59.01: [ 8779]: <-- [9:AT+FCT=30]
Apr 16 12:05:59.12: [ 8779]: --> [2:OK]
Apr 16 12:05:59.12: [ 8779]: <-- [14:AT+FNR=1,1,1,1]
Apr 16 12:05:59.24: [ 8779]: --> [2:OK]
Apr 16 12:05:59.24: [ 8779]: <-- [8:AT+FIE=0]
Apr 16 12:05:59.36: [ 8779]: --> [2:OK]
Apr 16 12:05:59.37: [ 8779]: <-- [22:AT+FCC=1,5,2,2,1,0,0,0]
Apr 16 12:05:59.48: [ 8779]: --> [2:OK]
Apr 16 12:05:59.48: [ 8779]: <-- [4:ATM0]
Apr 16 12:05:59.60: [ 8779]: --> [2:OK]
Apr 16 12:05:59.61: [ 8779]: <-- [13:AT+FCLASS=2.0]
Apr 16 12:05:59.84: [ 8779]: --> [2:OK]
Apr 16 12:05:59.84: [ 8779]: <-- [8:AT+FLO=2]
Apr 16 12:05:59.96: [ 8779]: --> [2:OK]
Apr 16 12:05:59.96: [ 8779]: <-- [8:AT+FPP=0]
Apr 16 12:06:00.08: [ 8779]: --> [2:OK]
Apr 16 12:06:00.08: [ 8779]: <-- [8:AT+FBO=0]
Apr 16 12:06:00.20: [ 8779]: --> [2:OK]
Apr 16 12:06:00.20: [ 8779]: <-- [9:AT+FCT=30]
Apr 16 12:06:00.32: [ 8779]: --> [2:OK]
Apr 16 12:06:00.32: [ 8779]: <-- [14:AT+FNR=1,1,1,1]
Apr 16 12:06:00.44: [ 8779]: --> [2:OK]
Apr 16 12:06:00.44: [ 8779]: <-- [8:AT+FIE=0]
Apr 16 12:06:00.56: [ 8779]: --> [2:OK]
Apr 16 12:06:00.57: [ 8779]: <-- [22:AT+FCC=1,5,2,2,1,0,0,0]
Apr 16 12:06:00.68: [ 8779]: --> [2:OK]
Apr 16 12:06:00.68: [ 8779]: <-- [19:AT+FLI="+654753273"]
Apr 16 12:06:00.80: [ 8779]: --> [2:OK]
Apr 16 12:06:00.81: [ 8779]: DIAL 4753273@
Apr 16 12:06:00.81: [ 8779]: <-- [12:ATDT4753273@]
Apr 16 12:06:22.96: [ 8779]: --> [4:+FCO]
Apr 16 12:06:22.99: [ 8779]: --> [18:+FNF:BC 53 01 60  ]
Apr 16 12:06:22.99: [ 8779]: REMOTE NSF "BC 53 01 60"
Apr 16 12:06:22.99: [ 8779]: --> [26:+FCI:                     ]
Apr 16 12:06:23.00: [ 8779]: REMOTE CSI ""
Apr 16 12:06:23.00: [ 8779]: --> [20:+FIS:1,3,0,2,1,0,0,0]
Apr 16 12:06:23.00: [ 8779]: --> [2:OK]
Apr 16 12:06:23.00: [ 8779]: REMOTE best rate 9600 bit/s
Apr 16 12:06:23.01: [ 8779]: REMOTE max page width 1728 pixels in 215 mm
Apr 16 12:06:23.01: [ 8779]: REMOTE max unlimited page length 
Apr 16 12:06:23.01: [ 8779]: REMOTE best vres 7.7 line/mm
Apr 16 12:06:23.01: [ 8779]: REMOTE best format 2-D MR
Apr 16 12:06:23.01: [ 8779]: REMOTE best 0 ms/scanline
Apr 16 12:06:23.01: [ 8779]: REMOTE does not support PostScript transfer
Apr 16 12:06:23.02: [ 8779]: USE 9600 bit/s
Apr 16 12:06:23.02: [ 8779]: USE 0 ms/scanline
Apr 16 12:06:23.02: [ 8779]: SEND file "docq/doc11029.cover;00"
Apr 16 12:06:23.03: [ 8779]: USE page width 1728 pixels in 215 mm
Apr 16 12:06:23.03: [ 8779]: USE unlimited page length 
Apr 16 12:06:23.04: [ 8779]: USE 3.85 line/mm
Apr 16 12:06:23.04: [ 8779]: USE 1-D MR
Apr 16 12:06:23.04: [ 8779]: <-- [22:AT+FIS=0,3,0,2,0,0,0,0]
Apr 16 12:06:23.16: [ 8779]: --> [2:OK]
Apr 16 12:06:23.16: [ 8779]: <-- [6:AT+FDT]
Apr 16 12:06:28.94: [ 8779]: --> [20:+FCS:0,3,0,2,0,0,0,0]
Apr 16 12:06:28.95: [ 8779]: --> [7:CONNECT]
Apr 16 12:06:28.95: [ 8779]: SEND begin page
Apr 16 12:06:28.97: [ 8779]: <-- data [1025]
Apr 16 12:06:28.98: [ 8779]: <-- data [1033]
Apr 16 12:06:28.98: [ 8779]: <-- data [1042]
Apr 16 12:06:28.99: [ 8779]: <-- data [1037]
Apr 16 12:06:28.99: [ 8779]: <-- data [1025]
Apr 16 12:06:29.99: [ 8779]: <-- data [1026]
Apr 16 12:06:30.00: [ 8779]: <-- data [1024]
Apr 16 12:06:30.00: [ 8779]: <-- data [1035]
Apr 16 12:06:31.01: [ 8779]: <-- data [1030]
Apr 16 12:06:31.02: [ 8779]: <-- data [1024]
Apr 16 12:06:31.02: [ 8779]: <-- data [870]
Apr 16 12:06:31.03: [ 8779]: SENT 11108 bytes of data
Apr 16 12:06:31.03: [ 8779]: SEND 1D RTC
Apr 16 12:06:31.03: [ 8779]: <-- data [9]
Apr 16 12:06:31.03: [ 8779]: SEND end page
Apr 16 12:06:31.04: [ 8779]: SEND send MPS (more pages, same document)
Apr 16 12:06:31.04: [ 8779]: <-- data [2]
Apr 16 12:06:41.66: [ 8779]: --> [2:OK]
Apr 16 12:06:41.67: [ 8779]: SEND recv MCF (message confirmation)
Apr 16 12:06:41.68: [ 8779]: SEND FAX: FROM root@ixora.singnet.com.sg TO +654753273 (docq/doc11029.cover;00 sent in 0:46)
Apr 16 12:06:41.69: [ 8779]: SEND file "docq/doc11029;00"
Apr 16 12:06:41.70: [ 8779]: USE page width 1728 pixels in 215 mm
Apr 16 12:06:41.71: [ 8779]: USE unlimited page length 
Apr 16 12:06:41.71: [ 8779]: USE 3.85 line/mm
Apr 16 12:06:41.71: [ 8779]: USE 1-D MR
Apr 16 12:06:41.71: [ 8779]: <-- [6:AT+FDT]
Apr 16 12:06:41.83: [ 8779]: --> [7:CONNECT]
Apr 16 12:06:41.84: [ 8779]: SEND begin page
Apr 16 12:06:41.85: [ 8779]: <-- data [1026]
Apr 16 12:06:41.86: [ 8779]: <-- data [1024]
Apr 16 12:06:41.86: [ 8779]: <-- data [1024]
Apr 16 12:06:41.87: [ 8779]: <-- data [1024]
Apr 16 12:06:41.87: [ 8779]: <-- data [454]
Apr 16 12:06:42.87: [ 8779]: SENT 4550 bytes of data
Apr 16 12:06:42.88: [ 8779]: SEND 1D RTC
Apr 16 12:06:42.88: [ 8779]: <-- data [9]
Apr 16 12:06:42.88: [ 8779]: SEND end page
Apr 16 12:06:42.88: [ 8779]: SEND send EOP (no more pages or documents)
Apr 16 12:06:42.89: [ 8779]: <-- data [2]
Apr 16 12:06:50.45: [ 8779]: --> [7:+FHS:00]
Apr 16 12:06:50.46: [ 8779]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Apr 16 12:06:50.46: [ 8779]: SEND recv MCF (message confirmation)
Apr 16 12:06:50.47: [ 8779]: SEND FAX: FROM root@ixora.singnet.com.sg TO +654753273 (docq/doc11029;00 sent in 0:09)
Apr 16 12:06:50.48: [ 8779]: <-- [4:ATH0]
Apr 16 12:06:50.49: [ 8779]: --> [2:OK]
Apr 16 12:06:50.49: [ 8779]: SESSION END

and the second one is from my BAD modem on the new server
to the same faxmachine using hylafax 4.0...

	MODEM ZYXEL U1496R+/V 6.14

Apr 16 15:52:01.01: [19601]: SESSION BEGIN 00000061 654753273
Apr 16 15:52:01.01: [19601]: SEND FAX: JOB 21 DEST 4753273 COMMID 00000061
Apr 16 15:52:01.01: [19601]: MODEM set DTR OFF
Apr 16 15:52:01.01: [19601]: DELAY 2600 ms
Apr 16 15:52:03.62: [19601]: MODEM set DTR ON
Apr 16 15:52:03.62: [19601]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
Apr 16 15:52:03.62: [19601]: MODEM flush i/o
Apr 16 15:52:03.62: [19601]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Apr 16 15:52:03.84: [19601]: --> [2:OK]
Apr 16 15:52:03.84: [19601]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Apr 16 15:52:03.86: [19601]: --> [2:OK]
Apr 16 15:52:03.86: [19601]: <-- [14:AT+FCLASS=2.0\r]
Apr 16 15:52:03.99: [19601]: --> [2:OK]
Apr 16 15:52:03.99: [19601]: <-- [9:AT+FLO=2\r]
Apr 16 15:52:04.00: [19601]: --> [2:OK]
Apr 16 15:52:04.00: [19601]: <-- [9:AT+FPP=0\r]
Apr 16 15:52:34.00: [19601]: MODEM TIMEOUT: reading line from modem
Apr 16 15:52:34.00: [19601]: MODEM <Timeout>
Apr 16 15:52:34.00: [19601]: <-- [9:AT+FBO=0\r]
Apr 16 15:52:34.01: [19601]: --> [2:OK]
Apr 16 15:52:34.01: [19601]: <-- [10:AT+FCT=30\r]
Apr 16 15:52:34.02: [19601]: --> [2:OK]
Apr 16 15:52:34.02: [19601]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 16 15:52:34.03: [19601]: --> [2:OK]
Apr 16 15:52:34.03: [19601]: <-- [9:AT+FIE=0\r]
Apr 16 15:52:34.04: [19601]: --> [2:OK]
Apr 16 15:52:34.04: [19601]: <-- [9:AT+FBU=1\r]
Apr 16 15:52:34.05: [19601]: --> [2:OK]
Apr 16 15:52:34.05: [19601]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Apr 16 15:52:34.07: [19601]: --> [2:OK]
Apr 16 15:52:34.07: [19601]: <-- [7:ATM1L5\r]
Apr 16 15:52:34.08: [19601]: --> [2:OK]
Apr 16 15:52:34.08: [19601]: STATE CHANGE: RUNNING -> SENDING
Apr 16 15:52:34.08: [19601]: MODEM input buffering enabled
Apr 16 15:52:34.08: [19601]: <-- [14:AT+FCLASS=2.0\r]
Apr 16 15:52:34.31: [19601]: --> [2:OK]
Apr 16 15:52:34.31: [19601]: <-- [9:AT+FLO=2\r]
Apr 16 15:52:34.42: [19601]: --> [2:OK]
Apr 16 15:52:34.42: [19601]: <-- [9:AT+FPP=0\r]
Apr 16 15:52:34.53: [19601]: --> [2:OK]
Apr 16 15:52:34.53: [19601]: <-- [9:AT+FBO=0\r]
Apr 16 15:52:34.64: [19601]: --> [2:OK]
Apr 16 15:52:34.64: [19601]: <-- [10:AT+FCT=30\r]
Apr 16 15:52:34.75: [19601]: --> [2:OK]
Apr 16 15:52:34.75: [19601]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 16 15:52:34.86: [19601]: --> [2:OK]
Apr 16 15:52:34.86: [19601]: <-- [9:AT+FIE=0\r]
Apr 16 15:52:34.97: [19601]: --> [2:OK]
Apr 16 15:52:34.97: [19601]: <-- [9:AT+FBU=1\r]
Apr 16 15:52:35.08: [19601]: --> [2:OK]
Apr 16 15:52:35.08: [19601]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Apr 16 15:52:35.20: [19601]: --> [2:OK]
Apr 16 15:52:35.20: [19601]: <-- [17:AT+FLI="SingNet"\r]
Apr 16 15:52:35.31: [19601]: --> [2:OK]
Apr 16 15:52:35.31: [19601]: DIAL 4753273
Apr 16 15:52:35.31: [19601]: <-- [12:ATDT4753273\r]
Apr 16 15:52:54.26: [19601]: --> [4:+FCO]
Apr 16 15:52:54.26: [19601]: --> [18:+FNF:BC 53 01 60  ]
Apr 16 15:52:54.26: [19601]: REMOTE NSF "BC 53 01 60"
Apr 16 15:52:54.26: [19601]: --> [26:+FCI:                     ]
Apr 16 15:52:54.26: [19601]: REMOTE CSI ""
Apr 16 15:52:54.26: [19601]: --> [20:+FIS:1,3,0,2,1,0,0,0]
Apr 16 15:52:54.26: [19601]: --> [2:OK]
Apr 16 15:52:54.26: [19601]: REMOTE best rate 9600 bit/s
Apr 16 15:52:54.26: [19601]: REMOTE max page width 1728 pixels in 215 mm
Apr 16 15:52:54.26: [19601]: REMOTE max unlimited page length 
Apr 16 15:52:54.26: [19601]: REMOTE best vres 7.7 line/mm
Apr 16 15:52:54.26: [19601]: REMOTE best format 2-D MR
Apr 16 15:52:54.26: [19601]: REMOTE best 0 ms/scanline
Apr 16 15:52:54.26: [19601]: USE 9600 bit/s
Apr 16 15:52:54.26: [19601]: USE 0 ms/scanline
Apr 16 15:52:54.26: [19601]: SEND file "docq/doc21.cover;30"
Apr 16 15:52:54.26: [19601]: USE page width 1728 pixels in 215 mm
Apr 16 15:52:54.26: [19601]: USE unlimited page length 
Apr 16 15:52:54.26: [19601]: USE 3.85 line/mm
Apr 16 15:52:54.26: [19601]: USE 1-D MR
Apr 16 15:52:54.26: [19601]: <-- [23:AT+FIS=0,3,0,2,0,0,0,0\r]
Apr 16 15:53:01.35: [19601]: --> [7:+FHS:20]
Apr 16 15:53:01.38: [19601]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
Apr 16 15:53:01.38: [19601]: --> [2:OK]
Apr 16 15:53:01.38: [19601]: <-- [7:AT+FDT\r]
Apr 16 15:53:01.75: [19601]: --> [10:NO CARRIER]
Apr 16 15:53:01.75: [19601]: MODEM No carrier
Apr 16 15:53:01.75: [19601]: SEND: Unspecified Transmit Phase B error; Giving up after 3 attempts to send same page "docq/doc21.cover;30", dir
num 0
Apr 16 15:53:01.75: [19601]: <-- [5:ATH0\r]
Apr 16 15:53:02.06: [19601]: --> [2:OK]
Apr 16 15:53:02.06: [19601]: MODEM set DTR OFF
Apr 16 15:53:02.06: [19601]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Apr 16 15:53:02.06: [19601]: SESSION END

Can anyone spot the differemces here that could cause the problem?

Any help is appreciated..

Mathias Koerber	  | Tel: +65 / 471 9820    |   mathias@staff.singnet.com.sg
SingNet NOC	  | Fax: +65 / 475 3273    |            mathias@koerber.org
Q'town Tel. Exch. | PGP: Keyid: 768/25E082BD, finger mathias@singnet.com.sg
2 Stirling Rd     |      1A 8B FC D4 93 F1 9A FC BD 98 A3 1A 0E 73 01 65
S'pore 148943     | Disclaimer: I speak only for myself
* Eifersucht ist eine Leidenschaft, die mit Eifer sucht, was Leiden schafft *

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 16 Apr 1997 10:47:50 +0200 (EETDST)
From: Emre Sezginer <emre@knidos.cc.metu.edu.tr>
To: flexfax@sgi.com
Subject: Re: help: need dialrules for ZA
Sender: owner-flexfax@celestial.com

Hello,

There must be a solution within dialrules for that but why not try this;

The following command line assumes that your ascii fax number database has
one entry at a line and each entry contains a pair of brackets you want to
lose. If this is not the case forget all about it!

cat your_fax_db |awk -F "(" '{print($1,$2)}' |awk -F ")" '{print($1,$2)}' 
> your_new_fax_DB

(These should be on one line)


Hope it works!

Emre Sezginer
METU Computer Center
                                              /____/                     

On Tue, 15 Apr 1997, Fred Meyer wrote:

> Hi folks,
> 
> ...i've got some trouble setting up the proper dialrules for my
> environment.
> 
> The fax numbers are comming out of a database, where they don't have to
> fit into a cannonical format (sigh)...
> It is quite common, that the numbers are stored with brackets in it,
> which is what you find here on a business card quite often.
> 
> ...the dialrules that ship with HylaFAX v4.0pl1 don't handle this
> properly.
> 
> Help anyone? 
> I'll offer a greeting card from SA as a reward ;-)
> 
> TIA,
>    fred
> 
> ...here is what the dialrules SHOULD do:
> 	
> 	Country-Code: 27
> 	   Aera-Code: 11 (i.e. Johannesburg)
> 	  Long-Dist.: 0
> 	   Internat.: 09
> 
> 
> 	-> dial "(011)123-456" should result in:
> 	
> 		cannonically: +2711123456
> 		  dialstring: 123456
> 
> 	-> dial "(021)123-456" (Capetown) should result in:
> 
> 		cannonically: +2721123456
> 		  dialstring: 021123456
> 
> 	-> dial "+49 (171) 12345" (Germany) should result in:
> 
> 		cannonically: +4917112345
> 		  dialstring: 094917112345
> 
> ...sometime you find even this:
> 
> 	-> dial "+27 (0)11 123-4567" (Johannesburg) should result in:
> 
> 		cannonically: +27111234567
> 		  dialstring: 1234567
> 
> 	-> dial "+27 (0)21 123-4567 (Capetown) should result in:
> 
> 		cannonically: +27211234567
> 		  dialstring: 0211234567
> 
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: tony@umcc.umcc.umich.edu (Tony Poole)
Subject: Re: WHFC 0.3b Lockups
To: uli@rgw-express.de (Ulrich Eckhardt)
Date: Wed, 16 Apr 1997 09:36:36 -0400 (EDT)
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

>thanks for this hint, i think i have found the problem now. The
>printer manager sends two messages of the type WM_SPOOLERSTATUS, so
>that whfc trys to open the sendfax dialog twice, or even reconnect
>to the server during a running transmission which ends sometimes in 
>strange behaviour of whfc and the server (and it may lead to the
>problem of the "command error, expecting command token" bug).
>
>I have uploaded a fixed pre release (dynamic only) on 
>ftp://ftp.rgw-express.de/pub/whfc/whfc.zip but i have not updated the
>web-page, because i have tested it only under Win95 (and will do some
>rewritings). 

Well, this made things worse.  The first time I tried to run it, it locked
up as soon as it popped up on the screen.

I killed it and restarted it.  I hit the Send Queue button, and it locked
up.  I killed and restarted again.  This time hitting send queue worked, but
the receive queue button locked it up.  The Receive Queue button will always
lock it up now - the Send Queue does about every other time.

Just to make sure it wasn't a server problem, I started the older .3 version
I have, and the send and receive queue buttons work fine in it.

Tony


------------------------------------------------------------------------------
Tony Poole  Traverse City, MI USA  tony@umcc.umich.edu  tony@cherry1.trv.mi.us

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 16 Apr 97 09:42:18 EDT
To: badbob@algonet.se
Cc: flexfax@sgi.com
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Tore, you are missing the $SPOOLDIR/dev/null file, which is used by
hfaxd.  I believe it is normally created by hfaxd on the fly: you
might check for its existence, and see if there is maybe a file there
instead of a device.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM1TXND/+ItycgIJRAQGaUwP/QOgubxjFUYGBF101teNt7SezfDU+dbhH
vh27P1CIUzFoMRsDmeXAT5311iyGXimLT8G6q4ow5oNJo8tMdd1wPCGJ0CSdeeZs
SGs2yTPNMIk5hf2QEMBc+LYFLP1nf/fqJrw9OLHzrOjp2jnGzGzzOKaMJ9Jb7rd6
z2mb2MdIrQU=
=Pfht
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: your mail
To: badbob@algonet.se (Tore Johansson)
Date: Wed, 16 Apr 1997 16:54:33 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Tore Johansson wrote:
    
    Hi,
    
    I am testing HylaFAx but does not get it running.
    I have install it and run "faxsetup" whithout errors.
    
    The hfaxd just exits abruptly. The syslog shows:
    
    Apr 15 22:46:00 MadHawk HylaFAX[978]: stat(/dev/null): No such file or directory
    Apr 15 22:46:30 MadHawk HylaFAX[984]: stat(/dev/null): No such file or directory
    Apr 15 22:47:20 MadHawk HylaFAX[990]: stat(/dev/null): No such file or directory
    Apr 15 22:48:08 MadHawk HylaFAX[999]: stat(/dev/null): No such file or directory
    Apr 15 22:48:51 MadHawk HylaFAX[1002]: stat(/dev/null): No such file or director
    y
    Apr 15 22:53:05 MadHawk HylaFAX[1032]: stat(/dev/null): No such file or director
    y
    Apr 15 22:54:23 MadHawk HylaFAX[1037]: stat(/dev/null): No such file or director
    y
    Apr 15 22:55:02 MadHawk HylaFAX[1042]: stat(/dev/null): No such file or director
    y
    
    What's the fault?

what's your system type, your HylaFAX version and so on...
and how do you start hfaxd(1M)?

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 16 Apr 97 11:39:32 EST
From: kanaan@if.ufrgs.br (Antonio Kanaan)
To: flexfax@sgi.com
Subject: faxgetty won't start on my linux system
Sender: owner-flexfax@celestial.com

Hello folks,

I have hylafax 4.0.pl1 on a Linux system (2.0.23 kernel).  

This is what my modem claims to be when I query it with 'AT I4':

Telepath 2 14,400/FAX/Voice RS Rev. 2.0
(it's supposed to be a USRSportster 14400 fax class 1.0.  it's got a
gateway seal on it)

I am trying to set up faxgetty as my standard getty program and never
get it to work:


This is the entry I added to inittab:

# Serial lines
s1:45:respawn:/usr/local/sbin/faxgetty cua1

then I 'init q'

I get this on /var/adm/messages:

Apr 15 18:05:55 pcastro7 init: Re-reading inittab
Apr 15 18:06:40 pcastro7 FaxGetty[975]: Unable to setup modem on /dev/cua1; giving up after 2 attempts
Apr 15 18:06:40 pcastro7 FaxGetty[975]: CLOSE /dev/cua1
Apr 15 18:06:41 pcastro7 FaxGetty[990]: OPEN /dev/cua1
Apr 15 18:07:59 pcastro7 FaxGetty[990]: Unable to setup modem on /dev/cua1; giving up after 2 attempts
Apr 15 18:07:59 pcastro7 FaxGetty[990]: CLOSE /dev/cua1
Apr 15 18:08:00 pcastro7 FaxGetty[992]: OPEN /dev/cua1
Apr 15 18:08:06 pcastro7 FaxGetty[992]: /dev/cua1: Can not initialize modem.

And this on /var/adm/syslog:

Apr 15 18:06:40 pcastro7 FaxGetty[975]: MODEM /dev/cua1 appears to be wedged
Apr 15 18:07:59 pcastro7 FaxGetty[990]: MODEM /dev/cua1 appears to be wedged

I strongly suspect I am doing something awfully stupid, but can't find
what is wrong.  I had similar problems trying to use uu_getty and
mgetty.

I use my modem routinely for a PPP connection.  I also use it with
kermit and can connect to another machine and transfer data.


Hope somebody has had a similar experience and can share the solution
 (hope not the grief) with me. Thanks,

Antonio Kanaan

Antonio Kanaan
Astronomy Postdoc
Instituto de Fisica - Universidade Federal do Rio Grande do Sul
kanaan@if.ufrgs.br
phone = 55.51.3166432
fax   = 55.51.3191762

ps. My config file reads:

(/var/spool/fax/etc/config.cua1)

# $Id: class1,v 1.23 1996/06/24 02:58:32 sam Rel $
#

#
# Generic Class 1 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode:		55
AreaCode:		51
FAXNumber:		+55.51.3386595
LongDistancePrefix:	0
InternationalPrefix:	00
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%p of %%t"
QualifyTSI:		etc/tsi
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use this to supply a hint
ModemRate:		9600
ModemFlowControl:	xonxoff		# XON/XOFF flow control assumed
#
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD follows carrier
GettyArgs:		"-h %l dx_%s"	# modem must auto-detect fax/data
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer.  This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
#
ModemDialCmd:		ATDT%s@		# T for tone dialing, @ for silence
#
# Other possible configuration stuff.  The default strings are
# shown below.  Only those that are different from the defaults
# need to be included in the configuration file.
#
ModemResetCmds:		""		# stuff to do when modem is reset
ModemAnswerCmd:		ATA		# use this to answer phone
ModemNoFlowCmd:		AT&K		# disable flow control cmd
ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
ModemSoftFlowCmd:	AT&K4		# software flow control cmd
ModemNoAutoAnswerCmd:	ATS0=0		# disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
ModemSetVolumeCmd:	"ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
ModemEchoOffCmd:	ATE0		# disable command echo
ModemVerboseResultsCmd:	ATV1		# enable verbose command results
ModemResultCodesCmd:	ATQ0		# enable result codes
ModemOnHookCmd:		ATH0		# place phone on hook (hangup)
ModemSoftResetCmd:	ATZ		# do soft reset of modem
ModemWaitTimeCmd:	ATS7=60		# wait 60 seconds for carrier
ModemCommaPauseTimeCmd:	ATS8=2		# comma pause time is 2 seconds
ModemRecvFillOrder:	LSB2MSB		# bit order of received facsimile
ModemSendFillOrder:	LSB2MSB		# bit order modem expects for transmit
#
Class1Cmd:		AT+FCLASS=1	# command to enter class 1
Class1TCFResponseDelay:	75		# 75ms delay between recv TCF & response
Class1SendPPMDelay:	75		# 75ms delay before sending PPM
Class1SendTCFDelay:	75		# 75ms delay between sending DCS & TCF
Class1TrainingRecovery:	1500		# 1.5sec delay after training failure
Class1RecvAbortOK:	200		# wait 200ms for abort response
Class1FrameOverhead:	4		# 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer:	40000		# 35+5secs waiting for ident frames
Class1TCFMaxNonZero:	10		# max 10% of data may be non-zero
Class1TCFMinRun:	1000		# min run is 2/3rds of TCF duration

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: ben@dha.unon.org
X-Authentication-Warning: amahoro.dha.unon.org: ben owned process doing -bs
Date: Wed, 16 Apr 1997 14:19:13 -0300 (GMT+3)
Reply-To: ben@dha.unon.org
To: flexfax@sgi.com
Subject: faxmailer - linux in particular
Sender: owner-flexfax@celestial.com

I have a number of questions on dirk's faxmailer which I am trying to get
working on Linux 2.0.27. HylaFax works fine. Is there a separate mailing
list for e-mail fax gateways? Is there another script that might be a bit
easier? 

I cannot get the mailing list archives to show me the messages themselves
(only the search results page reloads) so I cannot do all the homework I
would like to (I am using Lynx - is that a problem?).

Problems: setuid syntax and ownership/permissions once compiled for the
faxmailer.c mini-wrapper program under Linux. I think I have tweaked the
sendmail.cf OK.

Features I'm looking for (not apparent in faxmail): the
confirmation/failure e-mail should include at least the subject line of
the original message (preferably the whole text) so you know *which*
message to a frequently-used number succeeded/failed, and can resubmit if
you want. 

Hoping for a bit of help,

Thanks,

Ben Parker
Nairobi
Kenya

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 17 Apr 1997 10:03:21 +0800
To: kanaan@if.ufrgs.br (Antonio Kanaan)
From: CARY LEUNG <cary@cary.com>
Subject: Re: faxgetty won't start on my linux system
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

At 11:39 AM 1997/4/16 EST, you wrote:
>Hello folks,
>
>I have hylafax 4.0.pl1 on a Linux system (2.0.23 kernel).  
>
>This is what my modem claims to be when I query it with 'AT I4':
>
>Telepath 2 14,400/FAX/Voice RS Rev. 2.0
>(it's supposed to be a USRSportster 14400 fax class 1.0.  it's got a
>gateway seal on it)
>
>I am trying to set up faxgetty as my standard getty program and never
>get it to work:
>
>
>This is the entry I added to inittab:
>
># Serial lines
>s1:45:respawn:/usr/local/sbin/faxgetty cua1
    ^^

You try use this:

sl:234:respawn:/usr/local/sbin/faxgetty cua1

Cary Leung
cary@cary.com
(System Administrator)
CARYCOM (H.K.) LTD
TEL: +(852)-2803-5650
FAX: +(852)-2575-0992

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Writing a client
Date: Wed, 16 Apr 97 22:07:09 -0500
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

Can some one share a little more light on the hfaxd system. I've read all 
the man pages and README's I could find. I've managed to get spool 
information and kill jobs using the ftp style interface to HylaFAX. What 
I haven't figured out is how to upload a job into the que. Currently I'm 
doing this with Samba and Sendfax and controling it with an FTP ocx but 
I'd really appreciate anyone sharing info on how I could transfer the job 
up and put it into the spooler to be processed. Samba is great but it 
does take a lot of extra over head I would like to get rid of. Ftpd has 
an option that allows you to log all the commands sent to it by a user. 
I've used this at times when trouble shooting other transfer problems. 
Does hfaxd have a similar feature that I've missed??

TIA!


Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    64mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs     1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Taehwan Weon <weon@solvit.co.kr>
To: "'Brian Walters'" <macbnr@saratoga.compassnet.com>
Cc: "'FlexFax'" <flexfax@sgi.com>
Subject: RE: Writing a client
Date: Thu, 17 Apr 1997 14:36:08 +0900
Sender: owner-flexfax@celestial.com

I used the event-triggering function to monitor all kind of events
occuring in fax server on Windows95.

Did you try to use the trigger function which already used in faxwatch ?
For more information, look at the source of faxwatch. :-)
hope useful.


------------------------------------------------------------------
Taehwan Weon			E-mail: weon@cosmos.kaist.ac.kr
Director of R&D,			234-4 Gueui-dong Kwangjin-gu
DigitalWave, Inc.			Seoul, Korea

----------
From: 	Brian Walters[SMTP:macbnr@saratoga.compassnet.com]
Sent: 	Thursday, April 17, 1997 12:07 PM
To: 	flexfax@sgi.com
Subject: 	Writing a client

Can some one share a little more light on the hfaxd system. I've read all 
the man pages and README's I could find. I've managed to get spool 
information and kill jobs using the ftp style interface to HylaFAX. What 
I haven't figured out is how to upload a job into the que. Currently I'm 
doing this with Samba and Sendfax and controling it with an FTP ocx but 
I'd really appreciate anyone sharing info on how I could transfer the job 
up and put it into the spooler to be processed. Samba is great but it 
does take a lot of extra over head I would like to get rid of. Ftpd has 
an option that allows you to log all the commands sent to it by a user. 
I've used this at times when trouble shooting other transfer problems. 
Does hfaxd have a similar feature that I've missed??

TIA!


Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    64mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs     1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Writing a client
To: macbnr@saratoga.compassnet.com (Brian Walters)
Date: Thu, 17 Apr 1997 12:50:01 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Brian Walters wrote:
    
    Can some one share a little more light on the hfaxd system. I've read all 
    the man pages and README's I could find. I've managed to get spool 
    information and kill jobs using the ftp style interface to HylaFAX. What 
    I haven't figured out is how to upload a job into the que. Currently I'm 
    doing this with Samba and Sendfax and controling it with an FTP ocx but 
    I'd really appreciate anyone sharing info on how I could transfer the job 
    up and put it into the spooler to be processed. Samba is great but it 
    does take a lot of extra over head I would like to get rid of. Ftpd has 
    an option that allows you to log all the commands sent to it by a user. 
    I've used this at times when trouble shooting other transfer problems. 
    Does hfaxd have a similar feature that I've missed??

To upload a job into the queue you have to speak the new protocol
to the hfaxd(1M) daemon. There is only a little bit documentation
about it in the man page of hfaxd(1M) but you could also use the
"-vv" flag for the client sendfax(1) to get examples how to submit
jobs. Attached below is the output of:

$ sendfax -vv -d XXXXXXXX /tmp/ps

	matthias

Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 kant server (HylaFAX (tm) Version 4.0pl0) ready.
-> USER guru
230 User guru logged in.
-> TZONE LOCAL
200 Using time values in MET.
			<...output of dialrules deleted ....>
-> TYPE I
200 Type set to Image.
SEND compressed data, 4088 bytes
-> PORT 127,0,0,1,6,208
200 PORT command successful.
-> MODE Z
200 Mode set to ZIP.
-> STOT
150 FILE: /tmp/doc1510.ps (Opening new data connection).
SEND 1310 bytes transmitted (3.1x compression)
226 Transfer complete (FILE: /tmp/doc1510.ps).
-> JNEW
200 New job created: jobid: 1040 groupid: 1040.
-> JPARM FROMUSER "Matthias Apitz"
213 FROMUSER set to "Matthias Apitz".
-> JPARM LASTTIME 000259
213 LASTTIME set to 000259.
-> JPARM MAXDIALS 12
213 MAXDIALS set to 12.
-> JPARM MAXTRIES 3
213 MAXTRIES set to 3.
-> JPARM SCHEDPRI 127
213 SCHEDPRI set to 127.
-> JPARM DIALSTRING "XXXXXXXX"
213 DIALSTRING set to "XXXXXXXX".
-> JPARM NOTIFYADDR "guru@kant"
213 NOTIFYADDR set to "guru@kant".
-> JPARM VRES 196
213 VRES set to 196.
-> JPARM PAGEWIDTH 209
213 PAGEWIDTH set to 209.
-> JPARM PAGELENGTH 296
213 PAGELENGTH set to 296.
-> JPARM NOTIFY "none"
213 NOTIFY set to "none".
-> JPARM PAGECHOP "default"
213 PAGECHOP set to "default".
-> JPARM CHOPTHRESHOLD 3
213 CHOPTHRESHOLD set to 3.
-> JPARM DOCUMENT /tmp/doc1510.ps
200 Added document /tmp/doc1510.ps as docq/doc1510.ps.1040.
-> JSUBM
200 Job 1040 submitted.
request id is 1040 (group id 1040) for host localhost (1 file)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 17 Apr 1997 18:06:40 +0300
From: Gintautas Rakauskas <gintas@impro.mii.lt>
Organization: ImPro Ltd.
To: flexfax@sgi.com
Subject: Motorola Lifestyle & Premier
Sender: owner-flexfax@celestial.com

Dear sirs,
    
    I had a problem with Motorola Lifestyle and Premier modems.
    It was not possible to put them into normal adaptive answer mode.
    Now i'm fixed this with modem script.
    As i red mailing list, few people asking help on that. 
    So i'm sending script that works form me (SGI+Lifestyle or
SGI+Premier).
    (Please do not look at the comments - they could be obsolete)
    
   
#------------------------------------------------------------------------------------
    # Modem-related stuff: should reflect modem command interface
    # and hardware connection/cabling (e.g. flow control).
    # 
    ModemType:              Class1          # use class 1 interface
    ModemRate:              38400           # locked for fax
    sending&receiving
    ModemFlowControl:       rtscts          # default
    #
    ModemNoFlowCmd:         AT\Q            # disable flow control cmd
    ModemSoftFlowCmd:       AT&R1\Q1        # software flow control cmd
    ModemHardFlowCmd:       AT&R\Q3         # hardware flow control cmd
    ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to
reset
    ModemSetupDCDCmd:       AT&C2           # DCD follows carrier
    ModemSetupAACmd:        AT+FCLASS=0+FAA=1 
    #
    AdaptiveAnswer:         yes
    #
    ModemAnswerCmd:         "AT*FR\nATA"
    #ModemWaitForConnect:   yes             # modem sends FAX/DATA first
    #
    # Apparently Rev 2 of the firmware requires that you send ATO
    # to initiate a data connection when adaptive answer is set; the
    # following will send ATO and then wait for the CONNECT response.
    # 
    ModemAnswerFaxBeginCmd:         "<waitfor:CONNECT>"
    ModemAnswerDataBeginCmd:        "ATO\n<waitfor:CONNECT>"
    #
    ModemMfrQueryCmd:       !Motorola
    ModemModelQueryCmd:     !28.8
    ModemRevQueryCmd:       AT%V            # model and firmware rev
    #
    ModemDialCmd:           ATDT%s          # T for tone dialing
    #
   
#-----------------------------------------------------------------------------
    
    
    
    
    Best regards,
    Gintautas Rakauskas

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 17 Apr 1997 12:15:04 -0400
From: Ravi Pina <falcon@gersh.org>
Organization: Web Marketing, Inc.
To: flexfax@sgi.com
Subject: FaxQueuer Errors
Sender: owner-flexfax@celestial.com

I occasionaly get, when sending a page, 

ns1 FaxQueuer[PID]: : line 1: Missing parameter name.

Any ideas?

--
Ravi Pina              * "I am forbidden to produce milk.  In cyberland,
Systems Administrator  *  we only drink Diet Coke(tm)." - RENT
Web Marketing, Inc.    * "Its 106 miles to Chicago, we've got a full
falcon@webmrkt.com     *  tank of gas, half a pack of cigarettes, its
http://www.webmrkt.com *  dark and we're wearing sunglasses." - Blu'B'rs

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 17 Apr 1997 10:21:27 -0700
To: flexfax@sgi.com
From: Daniel <daniel@lynx.bc.ca>
Subject: Sendpage commands
Sender: owner-flexfax@celestial.com

Hi folks,

I am trying to setup a paging server (hylafax 4.0) and I am wondering
whether it can do the following for me:

1) Can I submit multiple PIN with different messages in one time. ie. The
server dial to the paging terminal and submit mulitple PIN paging. If yes,
how can I achieve it?

2) Can I setup more than one paging terminal ? ie for differnet paging
company. I looked at the man pagermap but I don't understand what it means.

Any ideas will be appreciated.

Daniel

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 18 Apr 1997 08:57:42 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Matthias Pfuetzner <pfuetz@igd.fhg.de>
cc: flexfax@sgi.com
Subject: Re: Some Problems with compiling on Sun Solaris 2.5.1 and SunPRO C++...
Sender: owner-flexfax@celestial.com

On Thu, 17 Apr 1997, Matthias Pfuetzner wrote:

> Hello Jonathan,
> 
> You (Jonathan Chen) write:
> > Set
> > 
> > 	CXX="/opt/SUNWspro/bin/CC +.c++"
> > 
> > or whatever the option is to tell your C++ compiler that .c++ files are
> > valid C++ files
> 
> That's exactly the problem, there is NO such option! And that's the reason,
> why in the first place, this config.site contains such "workarounds".... ;-(
> 
> But this workaround is for version 3.0 of the Sun CC compiler, the "current"
> version is 4.x... ;-(

Well, the next simplest solution would be for you to install gcc/g++
and use that to compile HylaFAX. The other not-so-simple solution would
be for you to rename all the C++ files and poke the Makefiles with your
changes.

Both options really look bad, don't they? ;-(
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: flexfax@sgi.com
Path: troja.stuttgart.netsurf.de!not-for-mail
From: stenny@troja.stuttgart.netsurf.de (Stefan Schober)
Newsgroups: troja.hylafax
Subject: known problems - ZyXel 1496E 6.17M?
Date: 18 Apr 1997 00:07:45 +0200
Organization: *** The * Deep * Black * Hole ***
Lines: 20
NNTP-Posting-Host: troja.ilias.net
X-Newsreader: TIN [UNIX 1.3 unoff BETA release 960825]
Sender: owner-flexfax@celestial.com

	Hi,

are there any known problems in firmware V6.17M for ZyXel 1496E-Modems? I replaced my
Eproms (V6.13) with Version 6.17 and found my modem unable to send faxes. As I need
it, I didn't look any further, instead I just replaced the EProms and reinstalled
V6.13, which worked fine so far.

So the question is - are there new bugs in V6.17, or is a 150ns-Eprom just a bit too
slow for my modem?

	thx ia
		stefan

-- 
	Stefan Schober, Pforzheim/Germany
		reach me at stenny@troja.stuttgart.netsurf.de

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: faxgetty
Date: Fri, 18 Apr 97 00:29:57 -0000
From: jens martens <jm@ko-en.com>
To: <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

hi!

i am sorry if this isnt the right way to post a question.
tell me how i can do that if this way is wrong, please.

my problem:
sunsparc5 with HylaFAX 4.
everything works fine(send+recieve)!

 - but - ahem, how can i implement
the command "faxgetty ttyb" so it works at startup?

(ttyb was configured with admintool)
so far i always the command "faxgetty ttyb" by hand (dont laugh)


thanks for a hint

jens :_)

---------------------------------------------------------------------------

jens martens
hohenzollernstrasse 5
70178 stuttgart, germany
fone: +49 711 6402233
cellular: +49 1727133371
fax: +49 711 6498216
jm@ko-en.com
---------------------------------------------------------------------------

"DOS/WIN based computers manufactured by companies such as IBM, Compaq, 
Tandy, and millions of others, are by far the most popular, with about 70 
million machines in use worldwide. Macintosh fans, on the other hand, 
note that cockroaches are far more numerous than humans, and that numbers 
alone do not denote a higher life form." (New York Times)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Sendpage commands
To: daniel@lynx.bc.ca (Daniel)
Date: Fri, 18 Apr 1997 08:11:50 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Daniel wrote:
    
    Hi folks,
    
    I am trying to setup a paging server (hylafax 4.0) and I am wondering
    whether it can do the following for me:
    
    1) Can I submit multiple PIN with different messages in one time. ie. The
    server dial to the paging terminal and submit mulitple PIN paging. If yes,
    how can I achieve it?

You can't.
    
    2) Can I setup more than one paging terminal ? ie for differnet paging
    company. I looked at the man pagermap but I don't understand what it means.
    
    Any ideas will be appreciated.

Attached below is my file pagermap(4F) which allows the following:

$ sendpage -p 49171613... "Do you like the D1 net?"
$ sendpage -p 49172471... "Do you like the D2 net?"
$ sendpage -p 49177...... "Do you like the E+ net?"

spool/etc/pagermap:
# D1 Short Message Service Centre (SMSC)
#
49171(.*) 01712092522/49171\1
#
# D2 Short Message Service Centre (SMSC)
#
49172(.*) 01722278020/0172\1
#
# E-Plus
#
49177(.*) 01771167/49177\1
    
	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Limiting retries in certain cases
To: owen@aldiscon.ie (Owen Sullivan)
Date: Fri, 18 Apr 1997 08:17:03 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Owen Sullivan wrote:
    
    We are using v3 of HylaFAX.  We have not upgraded to v4 because we
    have written a GSM short message to Fax tool on top of HylaFAX, and 
    don't want to upgrade HylaFAX until we upgrade our tool.

    Everything works OK, but users sometimes accidentally send a fax to 
    a telephone instead of a fax machine.  The error that appears in this
    case in the syslog file is "Unspecified Transmit Phase B error" and 
    also "T.30 T1 timeout".  
    
    I would like to configure HylaFAX so that it does not retry on this
    type of error, while still allowing it to try 3 times on receipt of
    a busy signal. I know about the MaxDials, MaxTries, and 
    NoCarrierRetrys parameters that can be set in /var/spool/fax/etc/config,
    but none of these seem to be what I need.
    
    Is there any way to do this?  Thanks.

Please show me a session-log of such a call directed to a voice
telephone instead of a fax machine.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: faxgetty
To: jm@ko-en.com (jens martens)
Date: Fri, 18 Apr 1997 08:32:24 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

jens martens wrote:
    
    hi!
    
    i am sorry if this isnt the right way to post a question.
    tell me how i can do that if this way is wrong, please.
    
    my problem:
    sunsparc5 with HylaFAX 4.
    everything works fine(send+recieve)!
    
     - but - ahem, how can i implement
    the command "faxgetty ttyb" so it works at startup?
    
    (ttyb was configured with admintool)
    so far i always the command "faxgetty ttyb" by hand (dont laugh)
    
    
    thanks for a hint

You could start it from an entry in the file inittab(4F)
or from a script in /etc/rc2.d executed during system boot.
Read the INSTALL-notes for the svr4.2 binary distribution
(e.g. at http://www.sisis.de/INSTALL-x86-svr4.2-v4.0pl0.html),
the same script should also work for your system type.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Re: Some Problems with compiling on Sun Solaris 2.5.1 and SunPRO C++...
To: jonc@pinnacle.co.nz (Jonathan Chen)
Date: Fri, 18 Apr 1997 09:56:14 +0200 (MET DST)
Cc: flexfax@sgi.com
From: Matthias Pfuetzner <pfuetz@igd.fhg.de>
Reply-To: Matthias Pfuetzner <pfuetz@igd.fhg.de>
X-Www-Url: http://www.igd.fhg.de/~pfuetz/
X-Finger: finger pfuetz@dakeeper.igd.fhg.de
X-Face: 
	-Yv1`NC3/%hsT(war5Y{)TIP1@oK9"vj%*19rjevxliJMg~]\[X6O9_X.mM;?v&n1J0+zOZ
	H2s?#n&$#"$}2$8?:q{FH;BP|SaP}-n8KrP:ZU\3,_}JffX^|<hY$R>vUv:>O#JgAJ>;mm|5l:*{~u
	Wx{^|7['aLq>oZ\5wzwRBX^zG|\$'2a<^t`Oj~Ix{sVD(HbjC)~AegAnyUmFMm1V=>gjsK,Z
Sender: owner-flexfax@celestial.com

Hello Jonathan,

You (Jonathan Chen) write:
> On Thu, 17 Apr 1997, Matthias Pfuetzner wrote:
> > You (Jonathan Chen) write:
> > > Set
> > > 
> > > 	CXX="/opt/SUNWspro/bin/CC +.c++"
> > > 
> > > or whatever the option is to tell your C++ compiler that .c++ files are
> > > valid C++ files
> > 
> > That's exactly the problem, there is NO such option! And that's the reason,
> > why in the first place, this config.site contains such "workarounds".... ;-(
> > 
> > But this workaround is for version 3.0 of the Sun CC compiler, the "current"
> > version is 4.x... ;-(
> 
> Well, the next simplest solution would be for you to install gcc/g++
> and use that to compile HylaFAX. The other not-so-simple solution would
> be for you to rename all the C++ files and poke the Makefiles with your
> changes.
> 
> Both options really look bad, don't they? ;-(

Yes... ;-)

I do have gcc 2.7.2 available with all the stuff I'd need, but: I'd like to
use Sun's CC because it uses standard Sun shared libs in standard places, so
that I can use the compiled stuff (when no errors and warnings will arouse
during compilation) on all future Solaris versions (and log a bug report
against Sun provided tools, and not having to tweak HylaFAX sources!)... (BTW:
I'm doing Solaris 2.6 Beta test, and that's one of the reason why I no longer
want to use gcc... One other is, that there seems no real further development
of gcc (is there an Ultra-Sparc version? Or a version for native IRIX 6.2? Or
a version for the 64 bit version of IRIX 6.2 (IRIX646)? Just to ask some
questions concerning gcc/g++... ;-) )).

I'd hoped, I might find anyone out there in netland who had done all that
already, but it seems, I have to do it... And due to the fact, that the actual
versions of Sun's C/C++ Compilers don't accept .c++ as an extension I have to
tweak the Makefiles in order to add some "renaming stuff"...

Or is there still someone out there who actually already did it?

Sincerly,
        Matthias
-- 
     Matthias Pfützner     | pfuetzner@igd.fhg.de  | Manche Frauen sind
  @work:  +49 6151 155-312 | @home: +49 6151 75717 | verschlingend wie ein
FhG-IGD, Wilhelminenstr. 7 | Lichtenbergstraße 73  | Gully.
    64283 Darmstadt, FRG   | 64289 Darmstadt, FRG  | Manuel Vázquez Montalbán

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 18 Apr 1997 07:21:58 -0500 (CDT)
From: David Smith <david@bcm.tmc.edu>
To: jens martens <jm@ko-en.com>
cc: flexfax@sgi.com
Subject: Re: faxgetty
Sender: owner-flexfax@celestial.com

On Fri, 18 Apr 1997, jens martens wrote:

> my problem:
> sunsparc5 with HylaFAX 4.
> everything works fine(send+recieve)!
> 
>  - but - ahem, how can i implement
> the command "faxgetty ttyb" so it works at startup?
>
> (ttyb was configured with admintool)
> so far i always the command "faxgetty ttyb" by hand (dont laugh)

I am assuming your running Solaris 2.x, if your are running 1.x it is 
similer.  Both of them are in the documentation.

Add this line to /etc/inittab
fg:3:respawn:/usr/local/sbin/faxgetty tty3

teh fields are (from inittab man page)
unique identifier : when you wnat it to be started : what you want started.

NOTE I found that I got "responing to rapidly" messages with I finally 
tracked down to the fact that /usr/local/lib is NOT in the standard LD 
path, so it couldn't find the libtiff libiary, although I could run it 
from the command line.  I had to move libtiff to /usr/lib. 

-----------------------------------------------------------------------
David A. Smith                          | Baylor College of Medicine
Systems Services                        | Enterprise Services, MEDT1103
(713) 798-4560                          | One Baylor Plaza
Internet:  david@bcm.tmc.edu            | Houston, TX  77030

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 18 Apr 1997 16:46:32 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: HylaFax Mailing liste <flexfax@sgi.com>
Subject: WHFC 0.3c
Sender: owner-flexfax@celestial.com

Hi,

i have uploaded the Version 0.3c of whfc to
http://www.rgw-express.de/whfc

I have done some major rewritings in the networking code and the
auto-fax code. So i hope that the problems with complete
locking of whfc are gone now. Maybe the problem with is error-
message ": expecting command token .." is also fixed, but
i couldn't test it here, because i can't reproduce the error.

Uli 
-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Rodrigo Pinto Abrantes <rodrigo@painet.com.br>
Subject: Phase B error
To: flexfax@sgi.com (hylafax)
Date: Fri, 18 Apr 1997 15:43:59 -0300 (EST)
Cc: rodrigo@prisca.painet.com.br (Rodrigo Pinto Abrantes)
Sender: owner-flexfax@celestial.com


	Dear all.



	Im using Motorola Surfr as Class 2 Fax.
	Sometimes i receive the following message:


> >Apr 17 22:16:33.08: [ 1278]: SESSION BEGIN 00000227 55215121585
> >Apr 17 22:16:33.08: [ 1278]: SEND FAX: JOB 111 DEST +55215121585 COMMID 000002
> >27
> >Apr 17 22:16:33.08: [ 1278]: DELAY 2600 ms
> >
> >Apr 17 22:16:57.59: [ 1278]: --> [5:+FCON]
> >Apr 17 22:17:37.59: [ 1278]: REMOTE HANGUP: Unspecified Transmit Phase B error
> > (code 20)
> >Apr 17 22:17:37.59: [ 1278]: SEND FAILED: Unspecified Transmit Phase B error
> >Apr 17 22:17:37.59: [ 1278]: SEND FAILED: Unspecified Transmit Phase B error; 
> >too many attempts to send
> >Apr 17 22:17:37.59: [ 1278]: <-- [5:ATH0\r]
> >Apr 17 22:17:37.74: [ 1278]: --> [2:OK]
> >Apr 17 22:17:37.74: [ 1278]: SESSION END


	Does anybody have experienced with this kind of error ?!
	is its a error about Motorola Class 2, what ?



	best regards,
	rodrigo p abrantes

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Using the Hfaxd protocol
Date: Fri, 18 Apr 97 23:27:52 -0500
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: "hylafax" <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

Thanks to Mathias and everyone else who help me get the FTP commands 
working on my Win95 Broadcast Fax Client, now I just need some fine 
tuning.

I've searched the source files with a couple of different search scripts 
and just can't find this. Can someone tell me what happens after the 
JSUBM is issued in an ftp style fax job. When I try to send a PS file 
with sendfax I know I'm going through the ghostscript interpreter via 
ps2fax but where does a PS file get interpretted when it's uploaded to 
the fax server via the FTP protocol. I've found it necessary to edit my 
ps2fax script just a little to help with an image width problem 
1728vs1734 but it doesn't seem that I'm calling it when uploading a file 
with my ftp-like client.
TIA
Brian


Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    64mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs     1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: Re: Phase B error
Date: Fri, 18 Apr 97 23:34:31 -0500
From: Brian Walters <macbnr@saratoga.compassnet.com>
To: "hylafax" <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

>	Im using Motorola Surfr as Class 2 Fax.
>	Sometimes i receive the following message:
>
>
>> >Apr 17 22:16:33.08: [ 1278]: SESSION BEGIN 00000227 55215121585
>> >Apr 17 22:16:33.08: [ 1278]: SEND FAX: JOB 111 DEST +55215121585 COMMID 
>000002
>> >27
>> >Apr 17 22:16:33.08: [ 1278]: DELAY 2600 ms
>> >
>> >Apr 17 22:16:57.59: [ 1278]: --> [5:+FCON]
>> >Apr 17 22:17:37.59: [ 1278]: REMOTE HANGUP: Unspecified Transmit Phase B 
>error
>> > (code 20)
>> >Apr 17 22:17:37.59: [ 1278]: SEND FAILED: Unspecified Transmit Phase B 
error
>> >Apr 17 22:17:37.59: [ 1278]: SEND FAILED: Unspecified Transmit Phase B 
>error; 
>> >too many attempts to send
>> >Apr 17 22:17:37.59: [ 1278]: <-- [5:ATH0\r]
>> >Apr 17 22:17:37.74: [ 1278]: --> [2:OK]
>> >Apr 17 22:17:37.74: [ 1278]: SESSION END
>
>
>	Does anybody have experienced with this kind of error ?!
>	is its a error about Motorola Class 2, what ?
>
Sorry rodrigo, I haven't seen this error on my motorolas. Does it happen 
with different recv'ing fax machines or just one? I have seen this type 
of error on the UsRobotics though. Make sure your modem is getting fully 
initialized.





Brian Walters<------------------------------------>macbnr@compassnet.com
      "How many computers can one have before they become obsessed???"
________________________________Systems__________________________________
PM6100w/dos   40mgs     1.5gigs       Mac7.5, Win3.x, Mklinux
Amd586-133    64mgs     7.1gigs       RH 4.1, Win95/3.x, SCO 5, OS/2
Alpha UDB 166 24mgs     3.2gigs       RedHat 4.1 Linux
486 dx100     16mgs     1.6gigs       RH 4.1 w/ HylaFax!!!
_________________________________________________________________________
http://www.compassnet.com/macbnr/bill_in_hell.html Joke about Bill Gates
    http://www.compassnet.com/macbnr               My home page

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sat, 19 Apr 1997 13:45:56 +0300
From: Uri Shkolnik <uri@harmonic.co.il>
Reply-To: uri@harmonic.co.il
Organization: Harmonic Lightwaves
To: uli@rgw-express.de
CC: flexfax@sgi.com
Subject: WHFC 0.3c
Sender: owner-flexfax@celestial.com

Hi,

The problem:
":Syntax error, expecting command token.

still exist in the current version (0.3c)

Regards,
-- 
***************************************
* Uri Shkolnik - System Administrator *
* Harmonic Lightwaves  (Israel)       *
* Email: uri@harmonic.co.il           *
* Tel: (972) 6 6230150  Fax: ~6230151 *
***************************************

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Using the Hfaxd protocol
To: macbnr@saratoga.compassnet.com (Brian Walters)
Date: Sat, 19 Apr 1997 16:32:56 +0200 (MST)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Brian Walters wrote:
    
    Thanks to Mathias and everyone else who help me get the FTP commands 
    working on my Win95 Broadcast Fax Client, now I just need some fine 
    tuning.
    
    I've searched the source files with a couple of different search scripts 
    and just can't find this. Can someone tell me what happens after the 
    JSUBM is issued in an ftp style fax job. When I try to send a PS file 
    with sendfax I know I'm going through the ghostscript interpreter via 
    ps2fax but where does a PS file get interpretted when it's uploaded to 
    the fax server via the FTP protocol. I've found it necessary to edit my 
    ps2fax script just a little to help with an image width problem 
    1728vs1734 but it doesn't seem that I'm calling it when uploading a file 
    with my ftp-like client.

ps2fax(1M) is called by the HylaFAX daemon faxq(1M) if the file
to transmit is a PostScript file. sendfax(1) does not convert
PostScript to TIFF/F.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sat, 19 Apr 1997 11:12:22 -0700
From: Steve Kapalko <kapalko@ibm.net>
To: flexfax@sgi.com
Subject: sendpage and SkyTel/SkyWord?
Sender: owner-flexfax@celestial.com

I am trying to send pages using sendpage to SkyTel/SkyWord and
am not having much success.  I am using hylaFAX4.0p1 on a ThinkPad850
running AIX4.1.5 with an IBM PCMCIA 28.8/14.4 bps Data/Fax Modem.  The
modem is operational for dialout, dialin and fax in/out.  Below is a
0x100f session log.
Thank You,
Steve

Apr 19 11:00:34.93: [17058]: SESSION BEGIN 00000068 18007669619
Apr 19 11:00:34.93: [17058]: SEND PAGE: JOB 17 DEST 18007669619 COMMID
00000068
Apr 19 11:00:34.93: [17058]: MODEM set DTR OFF
Apr 19 11:00:34.93: [17058]: DELAY 2600 ms
Apr 19 11:00:37.53: [17058]: MODEM set DTR ON
Apr 19 11:00:37.54: [17058]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS, output flow RTS/CTS
Apr 19 11:00:37.54: [17058]: MODEM add rts control discipline
Apr 19 11:00:37.55: [17058]: MODEM flush i/o
Apr 19 11:00:37.55: [17058]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 19 11:00:37.69: [17058]: --> [14:ATE0V1Q0S0=0H0]
Apr 19 11:00:37.69: [17058]: --> [2:OK]
Apr 19 11:00:37.69: [17058]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Apr 19 11:00:37.83: [17058]: --> [2:OK]
Apr 19 11:00:37.83: [17058]: <-- [5:ATM0\r]
Apr 19 11:00:37.97: [17058]: --> [2:OK]
Apr 19 11:00:37.97: [17058]: MODEM set parity: 7 bits, even parity
Apr 19 11:00:37.97: [17058]: MODEM input buffering enabled
Apr 19 11:00:38.02: [17058]: <-- [12:AT+FCLASS=0\r]
Apr 19 11:00:38.26: [17058]: --> [2:OK]
Apr 19 11:00:38.26: [17058]: <-- [22:ATW2+MS=2,0,2400,2400\r]
	NOTE: +MS=2,0,2400,2400 forces V.22bis,NO Automode,2400 baud
Apr 19 11:00:38.51: [17058]: --> [2:OK]
Apr 19 11:00:38.51: [17058]: DIAL 18007669619
Apr 19 11:00:38.51: [17058]: <-- [16:ATDT18007669619\r]
Apr 19 11:00:56.61: [17058]: --> [12:CONNECT 2400]
Apr 19 11:00:56.61: [17058]: EXPECT ID (paging central identification)
Apr 19 11:00:56.61: [17058]: <-- <1:\015>
Apr 19 11:00:58.61: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:00:58.61: [17058]: <-- <1:\015>
Apr 19 11:01:00.61: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:00.61: [17058]: <-- <1:\015>
Apr 19 11:01:02.61: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:02.61: [17058]: <-- <1:\015>
Apr 19 11:01:04.61: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:04.62: [17058]: <-- <1:\015>
Apr 19 11:01:06.62: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:06.62: [17058]: <-- <1:\015>
Apr 19 11:01:08.62: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:08.62: [17058]: <-- <1:\015>
Apr 19 11:01:10.62: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:10.62: [17058]: <-- <1:\015>
Apr 19 11:01:12.62: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:12.62: [17058]: <-- <1:\015>
Apr 19 11:01:14.62: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:14.62: [17058]: <-- <1:\015>
Apr 19 11:01:16.62: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:16.63: [17058]: PAGE FAILED: No initial ID response from
paging central
Apr 19 11:01:16.63: [17058]: <-- [5:ATH0\r]
Apr 19 11:01:21.63: [17058]: MODEM TIMEOUT: reading line from modem
Apr 19 11:01:21.63: [17058]: MODEM <Timeout>
Apr 19 11:01:21.63: [17058]: MODEM input buffering enabled
Apr 19 11:01:21.63: [17058]: MODEM set DTR OFF
Apr 19 11:01:21.63: [17058]: SESSION END

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sat, 19 Apr 1997 23:22:19 -0500
From: Neal Dalton <nrd@usmainstream.net>
To: flexfax@sgi.com
Subject: faxstst/hfaxd - no responce
Sender: owner-flexfax@celestial.com

I have 2 linux boxes, one is a 486 and hyla fax is working fine.  The
other is a P120 and faxstat is hanging.  Even when I telnet to port 
4559.  It just hangs, I don't get the HyalFAX banner of anything.

It is forking off the second hfaxd, but something is wrong.  the
etc/hosts file is only available to HylaFAX and I can't find what the
problem could be.

They both have redhat Linux 4.1, the 486 is running 2.0.30 kernel. I
have the latest version of HylaFAX, I installed the RPM version and
build a version, niether worked.

Also, I haven't figured out a good way to debug the child process, any
suggestions?

If I can't figure it out, I'm going to copy the disk of the working 
one and reconfigure it  But that is a lot of work.

I would greatly appreciate any help!!!

Thanks,

Neal

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: faxstst/hfaxd - no responce
To: nrd@usmainstream.net (Neal Dalton)
Date: Sun, 20 Apr 1997 12:56:39 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Neal Dalton wrote:
    
    I have 2 linux boxes, one is a 486 and hyla fax is working fine.  The
    other is a P120 and faxstat is hanging.  Even when I telnet to port 
    4559.  It just hangs, I don't get the HyalFAX banner of anything.
    
    It is forking off the second hfaxd, but something is wrong.  the
    etc/hosts file is only available to HylaFAX and I can't find what the
    problem could be.
    
    They both have redhat Linux 4.1, the 486 is running 2.0.30 kernel. I
    have the latest version of HylaFAX, I installed the RPM version and
    build a version, niether worked.
    
    Also, I haven't figured out a good way to debug the child process, any
    suggestions?

A good way to monitor such problems is strace(1) (or truss(1) on
other systems). In your case you should start the hfaxd(1M)
on the remote system from the shell as root under control
of strace(1). Don't forget to disable the hfaxd(1M) in the
inetd.conf(4F) for this test.

	matthias
    
    If I can't figure it out, I'm going to copy the disk of the working 
    one and reconfigure it  But that is a lot of work.
    
    I would greatly appreciate any help!!!
    
    Thanks,
    
    Neal


From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sun, 20 Apr 1997 11:42:36 -0500
From: Neal Dalton <nrd@usmainstream.net>
To: Matthias Apitz <Matthias.Apitz@SOFTCON.de>
CC: flexfax@sgi.com
Subject: Re: faxstst/hfaxd - no responce
Sender: owner-flexfax@celestial.com

Matthias.Apitz@SOFTCON.de wrote:
> 
> Neal Dalton wrote:
> 
> A good way to monitor such problems is strace(1) (or truss(1) on
> other systems). In your case you should start the hfaxd(1M)
> on the remote system from the shell as root under control
> of strace(1). Don't forget to disable the hfaxd(1M) in the
> inetd.conf(4F) for this test.

I forgot about strace.  It helped some, but once the process forks off,
I loose it.  It did show some printfs I had added.


I can't remember the trick I once new to debug deamon that forked
themselves.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: faxstst/hfaxd - no responce
To: nrd@usmainstream.net (Neal Dalton)
Date: Sun, 20 Apr 1997 20:57:59 +0200 (MSZ)
Cc: Matthias.Apitz@SOFTCON.de, flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Neal Dalton wrote:
    
    Matthias.Apitz@SOFTCON.de wrote:
    > 
    > Neal Dalton wrote:
    > 
    > A good way to monitor such problems is strace(1) (or truss(1) on
    > other systems). In your case you should start the hfaxd(1M)
    > on the remote system from the shell as root under control
    > of strace(1). Don't forget to disable the hfaxd(1M) in the
    > inetd.conf(4F) for this test.
    
    I forgot about strace.  It helped some, but once the process forks off,
    I loose it.  It did show some printfs I had added.
    
    I can't remember the trick I once new to debug deamon that forked
    themselves.

The real "trick" is reading the man page of strace(1); I'm not
using Linux but I think there is a flag "-f" or something like
that to get strace(1) follow the childs.

	matthias


From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Reply-to: cmattern@mindspring.com
To: flexfax@celestial.com
Subject: modem unavailable timeouts
Date: Sun, 20 Apr 1997 22:44:37 -0400
From: "Chuck Mattern" <cmattern@madman.ronin.mindspring.com>
Sender: owner-flexfax@celestial.com

I run hylafax 4.0 pl1 on a machine with only one modem which has to serve fax, 
dialup and internet connectivity.  If I submit a page request to hfaxd with 
the sendpage client while the modem is off hook for internet access or dialup 
the page times out in five minutes.  I see a mention in the man pages for 
number of attempts and time between attempts but all of these indicate that 
they are based on the number of actual dials and connections.  In my case no 
dial is made at all becasue the modem is unavailable.  I run faxgetty on the 
line and if I run faxstat while the attempt is queued and the modem is 
unavailable I get back the message indicating the hylafax is running and is 
waiting for the modem to become available.

Q: Is there a way to increase the timeout in this situation?

TIA,
Chuck
-- 
-----------------------------------------------------------------------------
|Chuck Mattern           | "That which does not kill us, makes us stronger."|
|cmattern@mindspring.com | -Friedrich Nietzsche-                            |
-----------------------------------------------------------------------------

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sun, 20 Apr 1997 23:50:28 -0500
From: Neal Dalton <nrd@usmainstream.net>
To: Matthias Apitz <Matthias.Apitz@SOFTCON.de>
CC: flexfax@sgi.com
Subject: Re: faxstst/hfaxd - no responce
Sender: owner-flexfax@celestial.com

Matthias.Apitz@SOFTCON.de wrote:

> The real "trick" is reading the man page of strace(1); I'm not
> using Linux but I think there is a flag "-f" or something like
> that to get strace(1) follow the childs.

THANKS, that was what I needed.  I missed the -f option in the man page.
I with the options came first.

The solution was that teh /etc/hosts file had perm 600 and HylaFAX
couldn't read it, so it went to DNS and timed out.

Neal

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: modem unavailable timeouts
To: cmattern@mindspring.com
Date: Mon, 21 Apr 1997 08:14:42 +0200 (MSZ)
Cc: flexfax@celestial.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Chuck Mattern wrote:
    
    I run hylafax 4.0 pl1 on a machine with only one modem which has to serve fax, 
    dialup and internet connectivity.  If I submit a page request to hfaxd with 
    the sendpage client while the modem is off hook for internet access or dialup 
    the page times out in five minutes.  I see a mention in the man pages for 
    number of attempts and time between attempts but all of these indicate that 
    they are based on the number of actual dials and connections.  In my case no 
    dial is made at all becasue the modem is unavailable.  I run faxgetty on the 
    line and if I run faxstat while the attempt is queued and the modem is 
    unavailable I get back the message indicating the hylafax is running and is 
    waiting for the modem to become available.
    
    Q: Is there a way to increase the timeout in this situation?

A: Check the man page of sendpage(1) for the flag "-l" and
the man page of the SNPP daemon part of hfaxd(1M) for the
config values KillTimeMap and RetryTimeMap. In the default
service level (=1) the default KillTime is 5 minutes. Either
use another service level for your jobs or change the mapping
in the KillTimeMap.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 21 Apr 1997 09:08:54 +0100
To: HylaFAX <flexfax@sgi.com>
From: Phil Watkinson <pkw@elgro.co.uk>
Subject: whfc 0.3c - cannot assign requested address problem
Cc: Ulrich Eckhardt <uli@rgw-express.de>
Sender: owner-flexfax@celestial.com

Hi.

Thanks for the new version of whfc; however, when either the 'Send queue'
or the 'Receive queue' buttons are pressed, or a fax is sent, the following
error message comes up :-

        'WSAEADDRNOTAVAIL Can't assign requested address'

followed by the error message :-

        'Cannot build data connection - Connection refused'

We have moved back to whfc 0.3a which does communicate with the fax server
correctly. 

I simply installed the new version over the old version - I made no changes
to 'ini' files or whatever - did I miss something ?  If this was the first
time we had tried whfc, I would suspect that the 'hosts' file was not set up
properly; but older versions of whfc seem to be fine.

Regards,
Phil Watkinson,
Boston, UK.

        "A life?? I don't have a life, I have a program" 
          - holographic doctor in Star Trek Voyager 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 21 Apr 1997 17:36:36 +0700
To: flexfax@sgi.com
From: "Frans Agus" <frans@centrin.net.id> (by way of Jim Smith <jimsmith@iName.com>)
Subject: faxmail
Sender: owner-flexfax@celestial.com

Hello,
I'v already install dirk's FaxMailer and Bob-faxmailer.
first my system is :

pentium pro 200
Unix BSD/OS 2.1
hylafax :v4.0pl1
The sendfax program already tested and running well

I tried Dirk's FaxMailer but I have idea how to configure sendmail.df
because there is no detail explanation how to configure sendmail.cf, after
reading the README file of bob-faxmailer, there is how to configure
sendmail.cf, then I 
I try to change sendmail.cf and other file according to bob-faxmailer
README file.
I add two lines :

##################
#   local info   #
##################
Mfax, P=/usr/local/bin/faxmailer, F=SmsDFMul, S=16, R=26, E=\r\n,
A=faxmailer $h Su


######################################
###   Ruleset 0 -- Parse Address   ###
######################################

S0

R$+ < @ fax.centrin.net.id. >   $#fax$@fax$:$1


also I copy faxmailer( from dirk ), parser.pl ... and etc to apropriate
directory,
then I mail to my fax :
mail 434115@fax.centrin.net.id

there is no fax I receive, after a few minutes mail administrator receive
that 434115 users unknown.


my questions are :
-where I must add this line exactly, I am not familiar with sendmail.cf.
there is no error occured when I restart sendmail.
-anything wrong with the configuration, or left ?


frans Agus
http://www.centrin.net.id

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Ludovico Magnocavallo <root@mailhub.communicate.it>
Subject: problem with sendfax
To: flexfax@sgi.com
Date: Mon, 21 Apr 1997 14:37:38 -0100 (GMT+1)
Sender: owner-flexfax@celestial.com

I am running Hylafax 4.0pl1 on a Linux 2.0.21 machine, and I get the
following message from sendfax:

Unrecoverable error: invalidfileaccess in .outputpage
Operand stack:
    true  1

Unexpected interpreter error -9.
Error object: (f80)op(245:.outputpage)0x80642c4
Operand stack at 0x8140f08:
0x81489d4: 0x0b int  --F------ 0x0000 0x00000001 = 1
0x81489dc: 0x01 bool --F------ 0x0000 0x00000001 = true
Execution stack at 0x8140f5c:
0x814a33c: 0x0f oper --F---e-- 0x0000 0x08050000 = %interp_exit
0x814a344: 0x12 str  --F-rxe-- 0x0000 0x00000000 = 
0x814a34c: 0x03 file --L-rxe-- 0x0001 0x08151978
0x814a354: 0x0e null --F---e-- 0x0000 0x0805aeb4
0x814a35c: 0x03 file --S-rxe-- 0x0001 0x08144294
0x814a364: 0x0f oper --F---e-- 0x0000 0x0805ae70 = %runexec_finish
0x814a36c: 0x03 file --S-rxe-- 0x0001 0x08144294
0x814a374: 0x05 mpry --G-rxe-- 0x0002 0x0817fec6
0x814a37c: 0x05 mpry --G-rxe-- 0x0003 0x0817feac
0x814a384: 0x05 mpry --G-rxe-- 0x0039 0x08180532
Dictionary stack at 0x8140e84:
0x814ab6c: 0x02 dict --Gwrx--- 0x0000 0x0814acbc
0x814ab74: 0x02 dict --Gwrx--- 0x0000 0x0818f7d0
0x814ab7c: 0x02 dict --Lwrx--- 0x0000 0x0814fbc0
0x814ab84: 0x02 dict --Lwrx--- 0x0000 0x08151a00

Any help is appreciated.

(GS works fine, and hylafax itself has been working flawlessly for a
while).

Thank you

Ludovico Magnocavallo
Communicate! srl
+39 2 58305818
ludo@communicate.it

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Jacek Badziak <Jacek.Badziak@students.mimuw.edu.pl>
Date: Mon, 21 Apr 1997 17:59:02 +0200 (MET DST)
To: flexfax@sgi.com
Subject: new browser for hylafax !
Sender: owner-flexfax@celestial.com


	Hi folks.

I'd like to inform You that there is a new browser for incoming fax'es. It
was originaly written for "mgetty" software and ported by me to work with
HylaFax and Apache WWW server. I will make it avaiable on 22 april 1997 at 
ftp.pkbs.com.pl ---> browser.tgz 

Best Regards

////////////////////////////////
+ Jacek Badziak                +
+ System Administrator         +
+ http://www.pkbs.com.pl       +
+ tel. +48.22.625.25.64        +
+ fax. +48.22.625.23.91        +
+ e-mail: jb@pkbs.com.pl       +
///////////////////////////////
  

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: "Bernd Duerrer" <duerrer@aea.ruhr-uni-bochum.de>
To: <flexfax@sgi.com>
Subject: Waiting for modem to come ready
Date: Mon, 21 Apr 1997 18:55:43 +0200
Sender: owner-flexfax@celestial.com

Configuration: HylaFAX v4.0pl1 under SunOS 4.1.3 with gcc 2.7.2.1

When running faxstat, I always get the message "Waiting for modem to come
ready". The modem works fine when I use an UNIX command like tip. When both
hfaxd and  faxq are running and I start faxgetty manually, the log shows
the following:

Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM /dev/cua0 appears to be wedged
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM WEDGED: bin/wedged "cua0"
"/dev/cua0"
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM WEDGED: bin/wedged "cua0"
"/dev/cua0"
Apr 21 18:31:55 ftp FaxQueuer[145]: MODEM WEDGED: bin/wedged "cua0"
"/dev/cua0"

I would be grateful for any hints to get it to work.

By the way: the LogFacility entry in the hfaxd.conf file seems to be
ignored: when I start hfaxd the startup messages

Apr 21 18:26:44 ftp HylaFAX[148]: HylaFAX SNPP Protocol Server: restarted.
Apr 21 18:26:44 ftp HylaFAX[148]: HylaFAX INET Protocol Server: restarted.

are written to the log file I use for daemon logging.

Regards,

Bernd

----------------------------------------------------------------------------
---
Dipl.-Ing. Bernd Duerrer
Institute of Communication Acoustics
IC 1/132
Ruhr-Universitaet Bochum
44780 Bochum, Germany
Tel.: +49-234-700-3481
Fax: +49-234-7094-165
e-mail: duerrer@aea.ruhr-uni-bochum.de
 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 22 Apr 1997 01:26:50 +0200 (MET DST)
From: Richard Kail <richard@kailkiste.at>
Reply-To: e8903122@student.tuwien.ac.at
To: Matthias Apitz <Matthias.Apitz@SOFTCON.de>
Cc: Neal Dalton <nrd@usmainstream.net>, Matthias.Apitz@SOFTCON.de,
        flexfax@sgi.com
Subject: Re: faxstst/hfaxd - no responce
Sender: owner-flexfax@celestial.com

Hello !

On Sun, 20 Apr 1997 Matthias.Apitz@SOFTCON.de wrote:

> The real "trick" is reading the man page of strace(1); I'm not
> using Linux but I think there is a flag "-f" or something like
> that to get strace(1) follow the childs.

	BTW, with this 'trick' you can also debug servers forked off by 
inetd(8). Using strace -fp <pid-of-inetd> you can watch the servers. This 
method is only useful if you box hasn't much traffic.

Kind regards,
	Richard

------
We can use symlinks of course... syslogd would be a symlink to syslogp and
ftpd and ircd would be linked to ftpp and ircp... and of course the
point-to-point protocal paenguin.
(Kevin M. Bealer, commenting on the penguin Linux logo.)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 22 Apr 1997 08:57:40 +0800
To: flexfax@sgi.com
From: CARY LEUNG <cary@cary.com>
Subject: Solaris X86 binaries
Sender: owner-flexfax@celestial.com

Dear All users of HylaFAX,

I already setup three binaries for HylaFAX, include 'mgetty-1.1.0',
'gs4.03' and 'hylafax-v4.0pl1'.

I already test ok running in Solaris-2.5-x86, and these binaries 
using gcc-2.7.2.2 to setup.

You can find the binaries in ftp.cary.net/pub/unix/fax

mgetty.solaris-x86.tar.gz
gs403.solaris-x86.tar.gz
hylafax.solaris-x86.tar.gz

and you can find the gcc-2.7.2.2 binaries in 
ftp.cary.net/pub/unix/sun/solaris/x86/binaries

gcc-2.7.2.2-x86-solaris2.5.tar.Z

Any comment or question, you can email to me at cary@cary.com or
post to flexfax@sgi.com.

Good Luck.


Cary Leung
cary@cary.com
(System Administrator)
CARYCOM (H.K.) LTD
TEL: +(852)-2803-5650
FAX: +(852)-2575-0992

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 22 Apr 1997 09:08:20 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: Phil Watkinson <pkw@elgro.co.uk>
CC: HylaFAX <flexfax@sgi.com>
Subject: Re: whfc 0.3c - cannot assign requested address problem
Sender: owner-flexfax@celestial.com

Phil Watkinson wrote:
> 
> Hi.
> 
> Thanks for the new version of whfc; however, when either the 'Send queue'
> or the 'Receive queue' buttons are pressed, or a fax is sent, the following
> error message comes up :-
> 
>         'WSAEADDRNOTAVAIL Can't assign requested address'
> 
> followed by the error message :-
> 
>         'Cannot build data connection - Connection refused'
> 
> We have moved back to whfc 0.3a which does communicate with the fax server
> correctly.
> 
> I simply installed the new version over the old version - I made no changes
> to 'ini' files or whatever - did I miss something ?  If this was the first
> time we had tried whfc, I would suspect that the 'hosts' file was not set up
> properly; but older versions of whfc seem to be fine.
> 
> Regards,
> Phil Watkinson,
> Boston, UK.

Hi,

your installation process is correct. This may be an other bug in the 
windows 8-< networking code. Do you use it on NT or Win95 ?

Uli

-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
X-Authentication-Warning: Hurwitz.fs100.suse.de: choeger owned process doing -bs
Date: Tue, 22 Apr 1997 10:16:27 +0200 (CEST)
From: Carsten Hoeger <choeger@suse.de>
To: flexfax@sgi.com
Subject: faxgetty & mgetty
Sender: owner-flexfax@celestial.com

Hello,

all those people having trouble to run mgetty AND faxgetty together
(under Linux):
with the new version of mgetty (1.0.0) it works fine!!! :-)

mfG,
	Carsten Hoeger
------
Carsten Hoeger  - S.u.S.E. GmbH -  Gebhardtstr. 2  -  90762 Fuerth  -  Germany
fax +49-911-3206727                 -                  mailbox +49-911-3247122

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Solaris X86 binaries
To: cary@cary.com (CARY LEUNG)
Date: Tue, 22 Apr 1997 11:05:58 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

CARY LEUNG wrote:
    
    Dear All users of HylaFAX,
    
    I already setup three binaries for HylaFAX, include 'mgetty-1.1.0',
    'gs4.03' and 'hylafax-v4.0pl1'.
    
    I already test ok running in Solaris-2.5-x86, and these binaries 
    using gcc-2.7.2.2 to setup.
    
    You can find the binaries in ftp.cary.net/pub/unix/fax
    
    mgetty.solaris-x86.tar.gz
    gs403.solaris-x86.tar.gz
    hylafax.solaris-x86.tar.gz
    
    and you can find the gcc-2.7.2.2 binaries in 
    ftp.cary.net/pub/unix/sun/solaris/x86/binaries
    
    gcc-2.7.2.2-x86-solaris2.5.tar.Z
    
    Any comment or question, you can email to me at cary@cary.com or
    post to flexfax@sgi.com.

There is a "central" ftp-server for the HylaFAX distribution
(ftp://sgi.com/sgi/fax/) and will be a mirror in Germany too
in the next few days.

If you have something (e.g. a binary distribution for a specific
Unix system) to share you can also place it to sgi/fax/incoming
and drop a message to Sam Leffler (sam@sgi.com).

For each binary distribution there is also and should be also
a guide how to install the package(s), e.g. for Sun sparc
there are:

INSTALL-sparc-sunos5.5-v4.0pl1 
hylafax-sparc-sunos5.5-v4.0pl1-pkg.gz

Some of the INSTALL-* files are already HTML which makes them easy to
use during the installation. Most of the binary distributions are
in the standard install format for the specific system type.

BTW: I'm not sure what "mgetty.solaris-x86.tar.gz" is for in the
environment of HylaFAX (I know what mgetty is).

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 22 Apr 1997 09:37:34 -0400 (EDT)
From: Eliot Moss <moss@rhea.cs.umass.edu>
To: flexfax@sgi.com
Subject: More modem wedged woes
Reply-To: moss@cs.umass.edu
Sender: owner-flexfax@celestial.com

HylaFAX Version 4.0pl1
OS: Solaris 2.5 (x86)
Compiler: gcc 2.6.2

I have sending and receiving working ok, but when I use the single modem for
outgoing PPP calls, I get modem wedged messages, apparently from faxd (not
faxgetty). The status reads "waiting for modem to come ready".

Further info:

1) aspppd is the component that sets up ppp connections automatically when a
packet is routed to the ppp interface. To do so, it forks a child (or so it
appears from ps output). The child sets a UUCP lock on the modem device (cua2
in my case). Once the connection is established, the lock file is left there
until the connection is torn down (by the parent process), but the pid in the
lock file remains that of the child (slightly bogus).

2) When I use the line outgoing with Kermit, I do not get the messages
(presumably because the Kermit lock file has the correct process id in it).

3) I can't really debug on this system because -g is not supported by gcc and
the only debugger I have (gdb) cannot do anything with CC's -g output
(apparently), at least for C++ code. (C code I could probably debug.) So I
can't offer a patch.

4) Even when I turn on most of the trace bits, I do not seem to get trace
output. Perhaps someone could advise me further on that matter. (Solaris seems
to be a bit unusual in general :-).

Regards --							Eliot Moss

J. Eliot B. Moss, Associate Professor
Computer Science Department, LGRC          (413) 545-4206
University of Massachusetts                (413) 545-1249 (fax)
Box 34610                                  moss@cs.umass.edu (email)
Amherst MA 01003-4610

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
X-Authentication-Warning: amahoro.dha.unon.org: ben owned process doing -bs
Date: Tue, 22 Apr 1997 13:43:08 -0300 (GMT+3)
From: Ben Parker <ben@dha.unon.org>
To: Frans Agus <frans@centrin.net.id>
cc: flexfax@sgi.com
Subject: Re: faxmail
Sender: owner-flexfax@celestial.com

Look for a line in sendmail.cf beginning Cw and add your fax domain. It
might look like this. You will see from Bob's readme that you need an MX
record pointing to your host if you want to submit mail from elsewhere. 

Cwfax.centrin.net.id localhost

I warn you, these scripts may need some tweaking! Contact me (probably
best off the list) if you need more help.

On Mon, 21 Apr 1997, Frans Agus wrote:

> Hello,
> I'v already install dirk's FaxMailer and Bob-faxmailer.
> first my system is :
> 
> pentium pro 200
> Unix BSD/OS 2.1
> hylafax :v4.0pl1
> The sendfax program already tested and running well
> 
> I tried Dirk's FaxMailer but I have idea how to configure sendmail.df
> because there is no detail explanation how to configure sendmail.cf, after
> reading the README file of bob-faxmailer, there is how to configure
> sendmail.cf, then I 
> I try to change sendmail.cf and other file according to bob-faxmailer
> README file.
> I add two lines :
> 
> ##################
> #   local info   #
> ##################
> Mfax, P=/usr/local/bin/faxmailer, F=SmsDFMul, S=16, R=26, E=\r\n,
> A=faxmailer $h Su
> 
> 
> ######################################
> ###   Ruleset 0 -- Parse Address   ###
> ######################################
> 
> S0
> 
> R$+ < @ fax.centrin.net.id. >   $#fax$@fax$:$1
> 
> 
> also I copy faxmailer( from dirk ), parser.pl ... and etc to apropriate
> directory,
> then I mail to my fax :
> mail 434115@fax.centrin.net.id
> 
> there is no fax I receive, after a few minutes mail administrator receive
> that 434115 users unknown.
> 
> 
> my questions are :
> -where I must add this line exactly, I am not familiar with sendmail.cf.
> there is no error occured when I restart sendmail.
> -anything wrong with the configuration, or left ?
> 
> 
> frans Agus
> http://www.centrin.net.id
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 22 Apr 1997 10:02:24 -0700 (PDT)
From: "Scott J. Kramer" <sjk@graham.com>
To: Carsten Hoeger <choeger@suse.de>
Cc: flexfax@sgi.com
Subject: Re: faxgetty & mgetty
Sender: owner-flexfax@celestial.com

On Tue, 22 Apr 1997 10:16 +0200, Carsten Hoeger wrote:

    Hello,
    
    all those people having trouble to run mgetty AND faxgetty together
    (under Linux):
    with the new version of mgetty (1.0.0) it works fine!!! :-)

Uhh, mgetty-1.0.0 isn't new... last I checked, it was at version 1.1.4.

-sjk

-- 
Scott J. Kramer				Graham Technology Solutions
UNIX/Network Systems Administrator	20823 Stevens Creek Blvd., Suite 300
<sjk@graham.com>			Cupertino, CA  95014  USA
http://www.graham.com			+1.408.366.8001

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 22 Apr 1997 13:20:03 -0400
From: "Sam C. Nicholson !!" <scion@delphi.com>
Organization: Skye Communication Networks, Inc.
To: moss@cs.umass.edu
CC: flexfax@sgi.com
Subject: Re: More modem wedged woes
Sender: owner-flexfax@celestial.com

<Professor Moss complained of asppp's incompatibility with HylaFax>

I strongly recommend the DP package from ftp.acn.purdue.edu:/pub/dp
I prefer the dp3.1.4, because I only have SunOS5 here.  Dp-4.0
attempts to be compatible with SunOS4 as well, and has features I
just don't use.

FWIW, I just re-installed dp 3.1.4 here on twinscrew, having previously
installed HylaFax for the paging function.

The two seem to co-exist rather nicely.

Also FWIW, the last time I used asppp (Sun's bundled ppp for Solaris)
I found that even tip would be locked out of an otherwise idle port
for completely invisible reasons which required a reboot to clear.

I do not know who maintains dp now as Kirk Smith moved on to greener
pastures.  But the code (based on ppp-2.1.2) is solid.

-sam

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: RatMedic@aol.com
Date: Tue, 22 Apr 1997 22:39:53 -0400 (EDT)
To: flexfax@sgi.com
Subject: HylaFAX on non-networked machine
Sender: owner-flexfax@celestial.com

I was wondering if it is possible to run HylaFAX on a non-networked machine
running SCO V 386 3.2 v 4.2.

I downloaded the binary version and installed it. The documentation seemed to
say that TCP was not required, however whenever I try to use it I get error
messages indicating that open /dev/socksys failed. I suppose this is part of
TCP/IP, which I do not have. I have searched the documentation, but can find
nothing related to this.

If there is a way to configure it to run without TCP/IP please let me know.
Or else let me know that it's time to give up. Thanks.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
X-Authentication-Warning: Hurwitz.fs100.suse.de: choeger owned process doing -bs
Date: Wed, 23 Apr 1997 08:38:41 +0200 (CEST)
From: Carsten Hoeger <choeger@suse.de>
To: "Scott J. Kramer" <sjk@graham.com>
cc: flexfax@sgi.com
Subject: Re: faxgetty & mgetty
Sender: owner-flexfax@celestial.com

On Tue, 22 Apr 1997, Scott J. Kramer wrote:

> On Tue, 22 Apr 1997 10:16 +0200, Carsten Hoeger wrote:
> 
>     Hello,
>     
>     all those people having trouble to run mgetty AND faxgetty together
>     (under Linux):
>     with the new version of mgetty (1.0.0) it works fine!!! :-)
> 
> Uhh, mgetty-1.0.0 isn't new... last I checked, it was at version 1.1.4.

Yes, I have noticed it, but with an earlier version of mgetty it doesn`t
work...

1.1.5 is the actual version, I think...

mfG,
	Carsten Hoeger
------
Carsten Hoeger  - S.u.S.E. GmbH -  Gebhardtstr. 2  -  90762 Fuerth  -  Germany
fax +49-911-3206727                 -                  mailbox +49-911-3247122

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Alexandre Meissonnier <ameissonnier@dohle.com>
To: "HylaFAX-Mailingliste (E-Mail)" <flexfax@sgi.com>
Subject: Ghostscript binary distribution
Date: Wed, 23 Apr 1997 09:57:12 +0200
Sender: owner-flexfax@celestial.com

On my fax server, running SCO 5.0.2, I use the ghostscript binary distribution from ftp.sgi.com which, according to the README file, is configured to work with HylaFAX. However, I could not convert a single postscript document with it so far. Even the example postscript files in the distribution don't work. 
Is this a problem of the distribution in general or an incompatibility between SCO 5.0.2 and a distribution made for SCO 3.2?

For gs gurus: here is the error message I get:

	Error: /undefinedfilename in --file--
	Operand stack:
	    (cheq.ps)  (r)
	Execution stack:
	    %interp_exit  --nostringval--  --nostringval--  --nostringval--  false  --nostringval--  --nostringval--  --nostringval--
	Dictionary stack:
	    537/547  0/20  6/200  30/70
	Ghostscript: Unrecoverable error, exit code 1
	
	
--
Alexandre Meisonnier
Dohle Handelsgruppe Systemberatung GmbH
53719 Siegburg (Germany)
ameissonnier@dohle.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
X-Authentication-Warning: Hurwitz.fs100.suse.de: choeger owned process doing -bs
Date: Wed, 23 Apr 1997 10:00:48 +0200 (CEST)
From: Carsten Hoeger <choeger@suse.de>
To: "Lorenzo M. Catucci" <lorenzo@argon.roma2.infn.it>
cc: flexfax@sgi.com
Subject: Re: faxgetty & mgetty
Sender: owner-flexfax@celestial.com

On Wed, 23 Apr 1997, Lorenzo M. Catucci wrote:

> > On Tue, 22 Apr 1997, Scott J. Kramer wrote:
> > 
> > > On Tue, 22 Apr 1997 10:16 +0200, Carsten Hoeger wrote:
> > > 
> > >     Hello,
> > >     
> > >     all those people having trouble to run mgetty AND faxgetty together
> > >     (under Linux):
> > >     with the new version of mgetty (1.0.0) it works fine!!! :-)
> > > 
> > > Uhh, mgetty-1.0.0 isn't new... last I checked, it was at version 1.1.4.
> > 
> > Yes, I have noticed it, but with an earlier version of mgetty it doesn`t
> > work...
> > 
> > 1.1.5 is the actual version, I think...
> > 
> Would you mind to tell something more about mgetty configuration to
> accomplish this result? And, as a second question, does the callback
> function work too?

I don`t know about the callback function, sorry.

This are my GettyArgs:

GettyArgs:		"-r -b -s 19200 modem"

And this is the required section in my mgetty.config:

port modem
direct y
toggle-dtr n


mfG,
	Carsten Hoeger
------
Carsten Hoeger  - S.u.S.E. GmbH -  Gebhardtstr. 2  -  90762 Fuerth  -  Germany
fax +49-911-3206727                 -                  mailbox +49-911-3247122

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 23 Apr 1997 15:44:59 +0200
From: Hans-Peter Straub <straub@gks.de>
Reply-To: straub@gks.de
Organization: GKS Polygon
To: flexfax@sgi.com
CC: straub@gks.de
Subject: Problems converting ps2fax
Sender: owner-flexfax@celestial.com

Hello 

is ther someone who knows something about my problem. All the server
components are running fine, but the converting from phostscript to fax
format doesn't work. I've attached a mail from the server with some
error messages. 

I have all the needed programms installed:

- Ghostscript 4.03
- Tiff 3.4ba

and I have all the critical configs from mgetty or sendfax deleted
before.

Is that a known problem??

Plese send me mail. I'm, not belong to the mailing list.

Yours

Hans-Peter
>From fax@asem.straub.com  Tue Apr 22 20:40:37 1997
Return-Path: fax
Received: (from uucp@localhost) by asem.straub.com (8.7.5/8.7.3) id UAA01070; Tue, 22 Apr 1997 20:40:36 +0200
Date: Tue, 22 Apr 1997 20:40:36 +0200
From: Fax Agent <fax@asem.straub.com>
Message-Id: <199704221840.UAA01070@asem.straub.com>
To: hape@asem.straub.com
Subject: facsimile job 7 to 922241 failed
Status: RO

Your facsimile job to 922241 was not sent because
the document conversion script was not found.

    ---- Unsent job status ----

   Destination: 922241
         JobID: 7
       GroupID: 7
        Sender: Hans-Peter Straub
      Mailaddr: hape@asem.straub.com
Submitted From: highscreen.straub.com
    Page Width: 194 (mm)
   Page Length: 281 (mm)
    Resolution: 98 (lpi)
        Status: Unrecoverable error: undefined in K?
Operand stack:
    --nostringval--    comments19    comments18    comments17    comments16    comments15    comments14    comments13    comments12    comments11    comments10    comments9    comments8    comments7    comments6    comments5    comments4    comments3    comments2    comments1

Unexpected interpreter error -21.
Error object: K?(d84)name(0x8168670#5b6)
Operand stack at 0x811f728:
0x8127114: 0x0d name --S------ 0x046a 0x081676bc = comments1
0x812711c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127124: 0x0d name --S------ 0x0456 0x081675cc = comments2
0x812712c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127134: 0x0d name --S------ 0x0411 0x08167290 = comments3
0x812713c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127144: 0x0d name --S------ 0x044c 0x08167554 = comments4
0x812714c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127154: 0x0d name --S------ 0x04ad 0x081679ec = comments5
0x812715c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127164: 0x0d name --S------ 0x0501 0x08167de8 = comments6
0x812716c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127174: 0x0d name --S------ 0x053c 0x081680ac = comments7
0x812717c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127184: 0x0d name --S------ 0x05ae 0x08168610 = comments8
0x812718c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127194: 0x0d name --S------ 0x05e9 0x081688d4 = comments9
0x812719c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x81271a4: 0x0d name --S------ 0x05a4 0x08168598 = comments10
0x81271ac: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x81271b4: 0x0d name --S------ 0x05df 0x0816885c = comments11
0x81271bc: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x81271c4: 0x0d name --S------ 0x059a 0x08168520 = comments12
0x81271cc: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x81271d4: 0x0d name --S------ 0x05d5 0x081687e4 = comments13
0x81271dc: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x81271e4: 0x0d name --S------ 0x0590 0x081684a8 = comments14
0x81271ec: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x81271f4: 0x0d name --S------ 0x05de 0x08168850 = comments15
0x81271fc: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127204: 0x0d name --S------ 0x0599 0x08168514 = comments16
0x812720c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127214: 0x0d name --S------ 0x0585 0x08168424 = comments17
0x812721c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127224: 0x0d name --S------ 0x05c0 0x081686e8 = comments18
0x812722c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127234: 0x0d name --S------ 0x05fb 0x081689ac = comments19
0x812723c: 0x12 str  --Lwrx--- 0x0000 0x081323a1 = 
0x8127244: 0x0c mark --F------ 0xbfff 0x00000001
Execution stack at 0x811f77c:
0x8128a7c: 0x0f oper --F---e-- 0x0000 0x0806e784 = %interp_exit
0x8128a84: 0x12 str  --F-rxe-- 0x0000 0x00000000 = 
0x8128a8c: 0x03 file --L-rxe-- 0x0001 0x081302b8
0x8128a94: 0x0e null --F---e-- 0x0000 0x08079638
0x8128a9c: 0x03 file --S-rxe-- 0x0001 0x081229d4
0x8128aa4: 0x0f oper --F---e-- 0x0000 0x080795f4 = %runexec_finish
0x8128aac: 0x03 file --S-rxe-- 0x0001 0x081229d4
0x8128ab4: 0x05 mpry --G-rxe-- 0x0039 0x0815ef1e
Dictionary stack at 0x811f6a4:
0x81292ac: 0x02 dict --Gwrx--- 0x0000 0x081293fc
0x81292b4: 0x02 dict --Gwrx--- 0x0000 0x0816da50
0x81292bc: 0x02 dict --Lwrx--- 0x0000 0x0812e300
0x81292c4: 0x02 dict --Lwrx--- 0x0000 0x0813054c

       Dialogs: 0 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 0 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 0 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc7.cover          7378 PostScript cover page
docq/doc13.ps.7        209536 PostScript

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: mdander@calv4.cray.com (Mark D. Anderson)
Subject: HylaFax
To: flexfax@sgi.com
Date: Wed, 23 Apr 1997 10:07:58 -0400 (EDT)
Sender: owner-flexfax@celestial.com

Greetings,

We've installed hylafax v4.0pl1 on an Indy running 6.2 with Impressario 2.1,
but we seem to missing some parts.

Specifically, we don't have (or can find) "fax.so". The ps2fax.imp program
complains that it can'f find "fax.so" and says that we should have installed
"hylafax.sw.imprip". We've check FAQ's, searched the Web, re-downloaded the
distribution, but we cannot find "hylafax.sw.imprip" either.

Help!

					Mark Anderson
					mdander@cray.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 23 Apr 1997 07:23:18 -0700 (PDT)
From: Tim Rice <tim@trr.metro.NET>
To: RatMedic@aol.com
cc: flexfax@sgi.com
Subject: Re: HylaFAX on non-networked machine
Sender: owner-flexfax@celestial.com

On Tue, 22 Apr 1997 RatMedic@aol.com wrote:

> I was wondering if it is possible to run HylaFAX on a non-networked machine
> running SCO V 386 3.2 v 4.2.
> 
> I downloaded the binary version and installed it. The documentation seemed to
> say that TCP was not required, however whenever I try to use it I get error
> messages indicating that open /dev/socksys failed. I suppose this is part of
> TCP/IP, which I do not have. I have searched the documentation, but can find
> nothing related to this.
> 
> If there is a way to configure it to run without TCP/IP please let me know.
> Or else let me know that it's time to give up. Thanks.
> 

It will NOT run without TCP/IP.

You can buy TCP/IP for 3.2v4.2 (some distruibuters still have copies)
or you can upgrade to Open Server 5 enterprise.

--
Tim Rice			Multitalents	(707) 887-1469 (voice)
tim@trr.metro.net

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 23 Apr 97 10:48:42 EDT
To: straub@gks.de
Cc: flexfax@sgi.com
Subject: Re: Problems converting ps2fax
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


It looks like the specific postscript file in question is not
understood by ghostscript. Remember that different programs use
slightly different versions of Postscript, and use commands that may
be not included in ghostscript or are just plain *wrong* but
understood by *their* funky software.

Win95 drivers are, I believe, notorious for this.

Try turning the file to TIFF or to tiffg3 by hand using ps2tiff or
ps2fax, and see if it will convert. You also might look at the
original Postscript files in docq, directly with ghostscript or
ghostview, to see if ghostscript can interpret them directly into a
visual display.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM14hRD/+ItycgIJRAQFN4QP7BTAx2hZ7UcCUAuze3qTek7VMfnIfYhWX
/ElnoPtW3EPra/meHX1mmK8vlSykNX8LS4dXKV0IDNdNITZ+uR5suSRxKhLCa1Vd
5pQwripSsGvw7iMiPmXlP4BcGgEyK15ePRO0hT7AceNFf/G87TuNQEZWJEZKzujC
QpCXw+8gRWU=
=2eBb
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 23 Apr 1997 08:17:13 -0700 (PDT)
From: Tim Rice <tim@trr.metro.NET>
Reply-To: Tim Rice <tim@trr.metro.NET>
To: Alexandre Meissonnier <ameissonnier@dohle.com>
cc: "HylaFAX-Mailingliste (E-Mail)" <flexfax@sgi.com>
Subject: Re: Ghostscript binary distribution
Sender: owner-flexfax@celestial.com


On Wed, 23 Apr 1997, Alexandre Meissonnier wrote:

> On my fax server, running SCO 5.0.2, I use the ghostscript binary
> distribution from ftp.sgi.com which, according to the README file, is
> configured to work with HylaFAX. However, I could not convert a single
> postscript document with it so far. Even the e xample postscript files
> in the distribution don't work. Is this a problem of the distribution in
> general or an incompatibility between SCO 5.0.2 and a distribution made
> for SCO 3.2? 
> 
If you followed the instructions, including downloading the 2.6.2 fonts
from prep.ai.mit.edu it should work fine.
It works on the 5.0.2 machine I used to make the HylaFAX OS5 binary.

Someone else on the list running SCO 5.0.2 had gs troubles and also
wanted HP laser support so I made a gs with HP laser suport and it.
For some unknown reason it seemed to fix his gs problems.
Pick it up at ftp://trruw.metro.net/pub/gs.gz

As soon as I get a replacement test machine so I can run SCO OS5 again
I'll make a gs4.04 binary. 

> For gs gurus: here is the error message I get:
> 
> 	Error: /undefinedfilename in --file--
> 	Operand stack:
> 	    (cheq.ps)  (r)
> 	Execution stack:
> 	    %interp_exit  --nostringval--  --nostringval--  --nostringval--  false  --nostringval--  --nostringval--  --nostringval--
> 	Dictionary stack:
> 	    537/547  0/20  6/200  30/70
> 	Ghostscript: Unrecoverable error, exit code 1
> 	
> 	
> --
> Alexandre Meisonnier
> Dohle Handelsgruppe Systemberatung GmbH
> 53719 Siegburg (Germany)
> ameissonnier@dohle.com
> 
> 

--
Tim Rice			Multitalents	(707) 887-1469 (voice)
tim@trr.metro.net

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: hylafax : faxq
To: flexfax@sgi.com
Date: Wed, 23 Apr 1997 11:18:49 -0400 (EDT)
From: "Subin K Shrestha" <subin@seas.upenn.edu>
Cc: subin@seas.upenn.edu
Sender: owner-flexfax@celestial.com

Hello,
-------------------------------------------
PROBLEM: FAXQ DOESN'T KEEP ON RUNNING
FOR:	 OUTBOUND SERVICES only
-------------------------------------------

HYLAFAX VERSION: hylafax-v4.0pl1
COMPILER: gcc (2.7.1)
SYSTEM: SPARC/1000
OS VERSION: SOLARIS 2.5
MODEM: U.S. ROBOTICS SPORSTER 14.4

FAXSETUP run "hfaxd" but NOT "faxq". When I try to manually
do "% faxq" it exits right away. From what I understand I need
to have "faxq" running so that I can use "faxmodem" to attach
the modem (after doing "%faxaddmodem"). Here is what I am doing:

% faxsetup		# hfaxd RUNS: faxq DOESN'T
% faxaddmodem cua/b	# WORKS
% faxmodem cua/b	
% faxstat -v		# DOESN'T SHOW INFO ABOUT MODEM

Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 palm.rad.upenn.edu server (HylaFAX (tm) Version 4.0pl1) ready.
-> USER root
230 User root logged in.
-> PORT 127,0,0,1,234,127
200 PORT command successful.
-> LIST status
150 Opening new data connection for "status".
HylaFAX scheduler on palm.rad.upenn.edu: Running
226 Transfer complete.

I will really appreciate your help.
Thank you.

Sincerely,
Subin
-- 
*****************************************************************************
Subin K. Shrestha UPENN SEAS     Enrolled for: B.S.E. in CSE && M.S.E. in CIS
URL: http://www.seas.upenn.edu/~subin   My PGP public key is in my homepage.
email: subin@eniac.seas.upenn.edu       
Home: 215-222-1833 			Office: 215-573-9104
*****************************************************************************

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 23 Apr 97 13:10:41 EDT
To: flexfax@sgi.com, subin@seas.upenn.edu
Subject: Re: hylafax : faxq
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Subin, make sure that you are not running hfaxd from /etc/inetd.conf
(or the Solaris equivalent). Instead, use the "hylafax" script from
hylafax-v4.0pl1/etc/ directory to stop, then start up faxq and hfaxd
as daemons.  Then use "ps" to make sure you have an hfaxd running,
and work from there.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM15Ciz/+ItycgIJRAQFkpAP+McghmnHgKVZ3W/dUZOdA4JGn9D546ym6
6V95y2zT6OFR74dHfntAMBB9C7gTs5KL26RG79JMNwwkUA6VL2KhVIGNRAXTiePW
MB4DWSuoPzXmePLOsJ39IfXzmnCreXg36sJ/e9LzNUapgfc/ETPAG4sZCbkhMQOr
qFxrXwyrVb8=
=kKdK
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 23 Apr 1997 22:17:10 +0200
Reply-To: moeller.heinemann@t-online.de
Organization: A. Heinemann Heide GmbH & Co. KG
To: flexfax@sgi.com
Subject: Low resulation : retrain negative
From: moeller.heinemann@t-online.de (Michael Möller)
Sender: owner-flexfax@celestial.com

HI !
I`ve got a problem which I don´t understand.
Hardware : P90, 64 MB, 2 Skyconnect 28.800
Software : HylaFAX 4.0 pl 1 , Kernel 2.0.29 (S.u.S.E.)
I used HylaFAX for longer time to receive facsimile and print them.
Now I wanted to send facsimile. No problem at all, I can fax to everbody
except my dealer. I can only send to him in medium resolution
(196lines).
Then everything works fine. But I want to send facsimile in low
resolution
because it`s only test and half the price. When I try this,
HylaFAX sends every page 3 times and then it aborts with an error, but
the page is transmitted fine. (3 times, my dealer doesn´t like this.)

Session Log:

...
<-- data [453]
SENT 16835 bytes of data
<-- data [2]
SEND end page
--> [2:OK]
SEND send EOP (no more pages or documents)
<-- [9:AT+FET=2\r]
--> [8:+FPTS: 2]                     # I normally get +FPTS: 3 =>ok
--> [SEND recv RTN (retrain negative)# what does it mean exactly ?
<-- [6:AT+FK\r]
--> [9:+FHNG: 50]
REMOTE HANGUP: Unspecified Transmit Phase D error
...


Any ideas or suggestions ?

Michael

PS: I already know that I should improve my english.
-- 
Michael Möller                    A. Heinemann Heide GmbH & Co.KG
Unix-Systemadministrator          Technische Gebäudeausrüstung
moeller.heinemann@t-online.de     Süderdamm 5, 25746 Heide, Germany
D2:0172/4576755  Fax:05334/7485 oder 0481/87654  Tel.:0481/8571-0

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 24 Apr 1997 09:47:14 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Bernd Duerrer <duerrer@aea.ruhr-uni-bochum.de>
cc: flexfax@sgi.com
Subject: Re: Waiting for modem to come ready
Sender: owner-flexfax@celestial.com

On Mon, 21 Apr 1997, Bernd Duerrer wrote:

> Configuration: HylaFAX v4.0pl1 under SunOS 4.1.3 with gcc 2.7.2.1
> 
> When running faxstat, I always get the message "Waiting for modem to come
> ready". The modem works fine when I use an UNIX command like tip.

You've got to be careful with `tip'. On some implementations, it
appears to ignore control signals from the pins; and you get the
situation where you'd be able to connect to the modem with `tip'
whereas `cu' would just freeze.

Check out your modem connection with `cu', since that's usually run at
the same privilege level as hfaxd. If that doens't work, I'd check out
your pin-connections.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 23 Apr 1997 17:52:22 -0400 (EDT)
From: Tony Mori <tonylist@cobra.compusource.net>
To: flexfax@sgi.com
Subject: FreeBSD 2.2.1-Release & HFax 4.0pl1
Sender: owner-flexfax@celestial.com

Why won't it compile? I do ./configure, then
make, and get:

'rules", line 197:  Need an operator
Fatal errors encountered -- cannot continue





Tony Mori
Systems Administrator
CompuSOURCE Internet Services
Miami, Fl

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 23 Apr 1997 15:45:16 -0700
From: "Tad J. Kutcher" <dave@3diinc.com>
Organization: N.C.C.S.
To: flexfax@sgi.com
Subject: Hylafax on Indy Irix 5.3 R4400
Sender: owner-flexfax@celestial.com

Hey flexfax:

I previously had Hylafax working just fine on an Indy running Irix 5.3
using /dev/ttyf2
but this machine was a 100MHz R4600. My boss switched to a faster R4400
but now our fax doesn,t work.

I have installed Hylafax 4.0 on yhis new Indy running Irix 5.3 and tried
/dev/ttyf2 and /dev/ttyd2 but niether one will connect with faxgetty or
allow faxsend to connect. The modem is a USR class1 sportster 14400 and
here is the ouput from hinv.


Iris Audio Processor: version A2 revision 4.1.0
1 175 MHZ IP22 Processor
FPU: MIPS R4010 Floating Point Chip Revision: 0.0
CPU: MIPS R4400 Processor Chip Revision: 6.0
On-board serial ports: 2
On-board bi-directional parallel port
Data cache size: 16 Kbytes
Instruction cache size: 16 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Main memory size: 96 Mbytes
Integral ISDN: Basic Rate Interface unit 0, revision 1.0
Integral Ethernet: ec0, version 1
Integral SCSI controller 0: Version WD33C93B, revision D
Tape drive: unit 6 on SCSI controller 0: QIC 1000
CDROM: unit 5 on SCSI controller 0
Disk drive: unit 4 on SCSI controller 0
Tape drive: unit 3 on SCSI controller 0: DAT
Disk drive: unit 1 on SCSI controller 0
Graphics board: Indy 24-bit
Vino video: unit 0, revision 0, IndyCam connected


I understand that there is an issue with USR and Irix 5.3 and attempted
to install the replacement to patch 475, patch1268 but the portion
patchSG0001268eoe2_sw.kdebug gives an error when installed on this
system and the portion patchSG0001268dev.man.irix_lib requires a
subsystem that does not exist on our Irix 5.3 R4400 R4600 OS disk.

This patch was not necessary to run Hylafax with this modem on the R4600
so perhaps thier are some issues that pertain only to the R4400 and her
serial port control ?

Anyone ??

Tad J. Kutcher

V.N.A.

P.S. Is it possible for faxgetty to call uugetty instead of getty ?

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 23 Apr 97 20:06:30 EDT
To: tonylist@cobra.compusource.net
Cc: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Tony, which "make" are you using? The "rules" file is included as part of
the "Makefile": different OS's use different commands for inclusion,
and line 297 of the rules file should mention *another* file to
include, namely "Makedepend", which is set in the "defs" file.



-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM16kAT/+ItycgIJRAQErUAP/apw0YRvrQVcWOD55/88fsPrMCsFr4QmT
tKsnrwSVHCz2HkHIusT1qtgXlyBQgfy7WZGkxLIMLSVuK5r422k/wQ3Z430qmkWu
GN29B+qEO0DWfyCn1w+EykRCKjeyHmdkAS1qbt1Y9saEzkpbBBOIR2/Gsy1eswba
J/zZuGvvoqY=
=WtK9
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 23 Apr 1997 21:14:20 -0400 (EDT)
From: Ramon F Herrera <herrera@MIT.EDU>
To: flexfax@sgi.com
Subject: Linking error on SCO
Sender: owner-flexfax@celestial.com


I am trying to build the latest Hylafax.  I was able to make
some minor changes and solve several easy problems, but I
finally got stuck with the error included below.  It seems that
the function 'gettimeofday' cannot be located at link time, but
it also seems to be right there in /usr/lib/libc.a

Any help or pointers will be very much appreciated.

Regards,

-Ramon F. Herrera

____________________________________________________________________
Version Information:
--------------------------------------------------------------------
hylafax-v4.0pl1
OS: SCO OpenServer 5.0.2
gcc version 2.7-95q4   (downloaded from www.sco.com in binary format)
libg++ version unknown (downloaded from www.sco.com in binary format)
GNU Make version 3.75
GNU sed version 2.05
GNU Awk 3.0.2
GNU bash, version 2.00.0(1)-release (i586-unknown-sco3.2v5.0.2)
diff - GNU diffutils version 2.7
cmp - GNU diffutils version 2.7
GNU ar version 2.7
GNU ranlib version 2.7
GNU nm version 2.7
Note about 'ld': Unfortunatedly, there is no GNU ld for SCO, so I
have to use the vendor-provided 'ld'.
--------------------------------------------------------------------


Error Messages (stderr):
--------------------------------------------------------------------
undefined			first referenced
 symbol  			    in file
gettimeofday__FP7timevalP8timezone  ../util/libfaxutil.a
ld fatal: Symbol referencing errors. No output written to faxq
make[3]: *** [faxq] Error 1
make[2]: *** [default] Error 2
undefined			first referenced
 symbol  			    in file
gettimeofday__FP7timevalP8timezone  ../util/libfaxutil.a
ld fatal: Symbol referencing errors. No output written to hfaxd
make[3]: *** [hfaxd] Error 1
make[2]: *** [default] Error 2
--------------------------------------------------------------------
stdout:
--------------------------------------------------------------------
= faxd
make[3]: Entering directory `/home/ramon/ftp/hylafax/hylafax-v4.0pl1/faxd'
/usr/local/bin/gcc -Dsco -D_SVID3       -D__ANSI_CPP__ -I. -I.. -I.././faxd -I.././util -I/usr/local/include -I.././regex -g -O -o faxq DestControl.o DestInfo.o Job.o HylaClient.o Modem.o QLink.o Trigger.o TriggerRef.o faxQueueApp.o libfaxserver.a   -L/usr/local/lib  ../util/libfaxutil.a ../port/libport.a -L/usr/local/lib -ltiff -L../zlib -lz -L../regex -lregex -lsocket -lnsl -lm  -lmalloc 

[ld was exec'ed like this:]
ld -b coff /usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/sco5.ifile -Y P,/usr/ccs/lib:/usr/lib -o faxq /usr/ccs/lib/crt1.o /usr/ccs/lib/values-Xa.o /usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/crtbegin.o -L/usr/local/lib -L/usr/local/lib -L../zlib -L../regex -L/usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4 -L/usr/ccs/lib -L/usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/../../.. DestControl.o DestInfo.o Job.o HylaClient.o Modem.o QLink.o Trigger.o TriggerRef.o faxQueueApp.o libfaxserver.a ../util/libfaxutil.a ../port/libport.a -ltiff -lz -lregex -lsocket -lnsl -lm -lmalloc -lgcc -YP,/usr/ccs/lib:/lib:/usr/lib -lgcc -lcrypt -lgen -lc /usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/crtend.o make[3]!
: Leaving directory `/home/ramon/ftp/hylafax/hylafax-v4.0pl1/faxd'

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Raul Zighelboim <mango@staff.communique.net>
To: "'Tony Mori'" <tonylist@cobra.compusource.net>,
        "'flexfax@sgi.com'"
	 <flexfax@sgi.com>
Subject: RE: FreeBSD 2.2.1-Release & HFax 4.0pl1
Date: Wed, 23 Apr 1997 21:00:37 -0500
Sender: owner-flexfax@celestial.com

try gmake instead of make....

then post again about the next problem.

>-----Original Message-----
>From:	Tony Mori [SMTP:tonylist@cobra.compusource.net]
>Sent:	Wednesday, April 23, 1997 4:52 PM
>To:	flexfax@sgi.com
>Subject:	FreeBSD 2.2.1-Release & HFax 4.0pl1
>
>Why won't it compile? I do ./configure, then
>make, and get:
>
>'rules", line 197:  Need an operator
>Fatal errors encountered -- cannot continue
>
>
>
>
>
>Tony Mori
>Systems Administrator
>CompuSOURCE Internet Services
>Miami, Fl
>
>

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Hylafax on Indy Irix 5.3 R4400
To: dave@3diinc.com (Tad J. Kutcher)
Date: Thu, 24 Apr 1997 07:50:39 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Tad J. Kutcher wrote:
    
    Hey flexfax:
    
    I previously had Hylafax working just fine on an Indy running Irix 5.3
    using /dev/ttyf2
    but this machine was a 100MHz R4600. My boss switched to a faster R4400
    but now our fax doesn,t work.
    
    I have installed Hylafax 4.0 on yhis new Indy running Irix 5.3 and tried
    /dev/ttyf2 and /dev/ttyd2 but niether one will connect with faxgetty or
    allow faxsend to connect. The modem is a USR class1 sportster 14400 and
    here is the ouput from hinv.
    
    
    Iris Audio Processor: version A2 revision 4.1.0
    1 175 MHZ IP22 Processor
    FPU: MIPS R4010 Floating Point Chip Revision: 0.0
    CPU: MIPS R4400 Processor Chip Revision: 6.0
    On-board serial ports: 2
    On-board bi-directional parallel port
    Data cache size: 16 Kbytes
    Instruction cache size: 16 Kbytes
    Secondary unified instruction/data cache size: 1 Mbyte
    Main memory size: 96 Mbytes
    Integral ISDN: Basic Rate Interface unit 0, revision 1.0
    Integral Ethernet: ec0, version 1
    Integral SCSI controller 0: Version WD33C93B, revision D
    Tape drive: unit 6 on SCSI controller 0: QIC 1000
    CDROM: unit 5 on SCSI controller 0
    Disk drive: unit 4 on SCSI controller 0
    Tape drive: unit 3 on SCSI controller 0: DAT
    Disk drive: unit 1 on SCSI controller 0
    Graphics board: Indy 24-bit
    Vino video: unit 0, revision 0, IndyCam connected
    
    
    I understand that there is an issue with USR and Irix 5.3 and attempted
    to install the replacement to patch 475, patch1268 but the portion
    patchSG0001268eoe2_sw.kdebug gives an error when installed on this
    system and the portion patchSG0001268dev.man.irix_lib requires a
    subsystem that does not exist on our Irix 5.3 R4400 R4600 OS disk.
    
    This patch was not necessary to run Hylafax with this modem on the R4600
    so perhaps thier are some issues that pertain only to the R4400 and her
    serial port control ?
    
    Anyone ??
    
    Tad J. Kutcher
    
    V.N.A.
    
    P.S. Is it possible for faxgetty to call uugetty instead of getty ?

Just define the PATH_GETTY in your config.local and re-run
./configure.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Linking error on SCO
To: herrera@MIT.EDU (Ramon F Herrera)
Date: Thu, 24 Apr 1997 07:57:40 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Ramon F Herrera wrote:
    
    
    I am trying to build the latest Hylafax.  I was able to make
    some minor changes and solve several easy problems, but I

If you make changes to the HylaFAX source try finding out
the *real* reason for this change (sometimes the OS header
files are broken and not HylaFAX :-)) and provide a patch
which does not break building on other systems.

    finally got stuck with the error included below.  It seems that
    the function 'gettimeofday' cannot be located at link time, but
    it also seems to be right there in /usr/lib/libc.a
    
    Any help or pointers will be very much appreciated.

Check the prototype for gettimeofday(3) in your system and
compare it with its usage in HylaFAX;

	matthias
    
    Regards,
    
    -Ramon F. Herrera
    
    ____________________________________________________________________
    Version Information:
    --------------------------------------------------------------------
    hylafax-v4.0pl1
    OS: SCO OpenServer 5.0.2
    gcc version 2.7-95q4   (downloaded from www.sco.com in binary format)
    libg++ version unknown (downloaded from www.sco.com in binary format)
    GNU Make version 3.75
    GNU sed version 2.05
    GNU Awk 3.0.2
    GNU bash, version 2.00.0(1)-release (i586-unknown-sco3.2v5.0.2)
    diff - GNU diffutils version 2.7
    cmp - GNU diffutils version 2.7
    GNU ar version 2.7
    GNU ranlib version 2.7
    GNU nm version 2.7
    Note about 'ld': Unfortunatedly, there is no GNU ld for SCO, so I
    have to use the vendor-provided 'ld'.
    --------------------------------------------------------------------
    
    
    Error Messages (stderr):
    --------------------------------------------------------------------
    undefined			first referenced
     symbol  			    in file
    gettimeofday__FP7timevalP8timezone  ../util/libfaxutil.a
    ld fatal: Symbol referencing errors. No output written to faxq
    make[3]: *** [faxq] Error 1
    make[2]: *** [default] Error 2
    undefined			first referenced
     symbol  			    in file
    gettimeofday__FP7timevalP8timezone  ../util/libfaxutil.a
    ld fatal: Symbol referencing errors. No output written to hfaxd
    make[3]: *** [hfaxd] Error 1
    make[2]: *** [default] Error 2
    --------------------------------------------------------------------
    stdout:
    --------------------------------------------------------------------
    = faxd
    make[3]: Entering directory `/home/ramon/ftp/hylafax/hylafax-v4.0pl1/faxd'
    /usr/local/bin/gcc -Dsco -D_SVID3       -D__ANSI_CPP__ -I. -I.. -I.././faxd -I.././util -I/usr/local/include -I.././regex -g -O -o faxq DestControl.o DestInfo.o Job.o HylaClient.o Modem.o QLink.o Trigger.o TriggerRef.o faxQueueApp.o libfaxserver.a   -L/usr/local/lib  ../util/libfaxutil.a ../port/libport.a -L/usr/local/lib -ltiff -L../zlib -lz -L../regex -lregex -lsocket -lnsl -lm  -lmalloc 
    
    [ld was exec'ed like this:]
    ld -b coff /usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/sco5.ifile -Y P,/usr/ccs/lib:/usr/lib -o faxq /usr/ccs/lib/crt1.o /usr/ccs/lib/values-Xa.o /usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/crtbegin.o -L/usr/local/lib -L/usr/local/lib -L../zlib -L../regex -L/usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4 -L/usr/ccs/lib -L/usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/../../.. DestControl.o DestInfo.o Job.o HylaClient.o Modem.o QLink.o Trigger.o TriggerRef.o faxQueueApp.o libfaxserver.a ../util/libfaxutil.a ../port/libport.a -ltiff -lz -lregex -lsocket -lnsl -lm -lmalloc -lgcc -YP,/usr/ccs/lib:/lib:/usr/lib -lgcc -lcrypt -lgen -lc /usr/cygnus/progressive-95q4/H-i486-unknown-sco3.2v5.0.0/lib/gcc-lib/i486-unknown-sco3.2v5.0.0/2.7-95q4/crtend.o m!
 ak!
e[!
     3]!
    : Leaving directory `/home/ramon/ftp/hylafax/hylafax-v4.0pl1/faxd'

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Reply-To: <frans@centrin.net.id>
From: "Frans Agus" <frans@centrin.net.id>
To: "Ben Parker" <ben@dha.unon.org>
Cc: <hirawan@centrin.net.id>, <flexfax@sgi.com>
Subject: Re: faxmail
Date: Thu, 24 Apr 1997 15:48:36 +0700
Sender: owner-flexfax@celestial.com



----------
> From: Ben Parker <ben@dha.unon.org>
> To: Frans Agus <frans@centrin.net.id>
> Cc: flexfax@sgi.com
> Subject: Re: faxmail
> Date: Tuesday, April 22, 1997 11:43 PM
> 
> Look for a line in sendmail.cf beginning Cw and add your fax domain. It
> might look like this. You will see from Bob's readme that you need an MX
> record pointing to your host if you want to submit mail from elsewhere. 

I added this to DNS :

fax     IN      A       202.146.253.6
        IN      MX      10 fax
        IN      MX      20 bdg


these are aditional information may be useful :

and I am using sendmail 8.8.5 , this is telnet to port 25 and 110

fax# telnet 0 25
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
220 fax.centrin.net.id ESMTP Sendmail 8.8.5/8.7.3; Thu, 24 Apr 1997 11:27:03 +0700 (JVT)

fax# telnet 0 110
Trying 0.0.0.0...
Connected to 0.
Escape character is '^]'.
+OK QUALCOMM Pop server derived from UCB (version 2.1.4-R3) at fax.centrin.net.id starting.

and this is the output of faxstat -v
fax# faxstat -v
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.centrin.net.id.
220 fax.centrin.net.id server (HylaFAX (tm) Version 4.0pl1) ready.
-> USER root
230 User root logged in.
-> PORT 127,0,0,1,4,16
200 PORT command successful.
-> LIST status
150 Opening new data connection for "status".
HylaFAX scheduler on fax.centrin.net.id: Running
Modem tty01 (62 22 434115): Waiting for modem to come ready
226 Transfer complete.

> 
> Cwfax.centrin.net.id localhost
> 
> I warn you, these scripts may need some tweaking! Contact me (probably
> best off the list) if you need more help.

I already add Cw, in sendmail.cf ( at local info section ), restart sendmail, and the problem still exist.
I know very little about sendmail, where is exactly I must add the Cw ? I don't know where to add this line.
would you please send me more detail step to edit the sendmail.cf
when I mail to 434115@fax.centrin.net.id I get :
Returned mail: unknown mailer error 255

thank you for your time and information.

frans agus
http://www.centrin.net.id

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Jacek Badziak <Jacek.Badziak@students.mimuw.edu.pl>
Date: Thu, 24 Apr 1997 11:11:40 +0200 (MET DST)
To: Jacek Badziak <Jacek.Badziak@students.mimuw.edu.pl>
cc: flexfax@sgi.com
Subject: Re: new browser for hylafax !
Sender: owner-flexfax@celestial.com


Hi again...........
	I'd like to inform all people who tried to download on 22 and 23
april package "browser.tgz" that we had major problem with shared
directories on our ftp server, but problem is fixed now and package is
where it supposed to be that is:
ftp.pkbs.com.pl ---------> browser.tgz


I apologise for the inconvinence caused
Best Regards
J.Badziak
e-mail:jb@pkbs.com.pl 


On Mon, 21 Apr 1997, Jacek Badziak wrote:

> 
> 	Hi folks.
> 
> I'd like to inform You that there is a new browser for incoming fax'es. It
> was originaly written for "mgetty" software and ported by me to work with
> HylaFax and Apache WWW server. I will make it avaiable on 22 april 1997 at 
> ftp.pkbs.com.pl ---> browser.tgz 
> 
> Best Regards
> 
> ////////////////////////////////
> + Jacek Badziak                +
> + System Administrator         +
> + http://www.pkbs.com.pl       +
> + tel. +48.22.625.25.64        +
> + fax. +48.22.625.23.91        +
> + e-mail: jb@pkbs.com.pl       +
> ///////////////////////////////
>   
> 
> 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 24 Apr 1997 11:11:35 +0100
To: flexfax@sgi.com
From: Axel Friedrich <friedrich@planet.de>
Subject: Problems with textfmt
Sender: owner-flexfax@celestial.com

Hi Folks,

I have problems with the program textfmt.
I use HylaFAX 4.0-pl0 , gcc 2.7.2 under linux 2.0.25. 
Textfmt converts my input in a wrong way.
After a "a-umlaut" it puts a blank-line on output.
After a "A-umlaut" it puts a blank-line on output.
Can anybody help me?

PS: Sorry, me english is not so good!

A.Friedrich

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 24 Apr 1997 19:22:04 +0900
From: ZhenYu Wang <wzy@szwd.net.cn>
Reply-To: wzy@szwd.net.cn
Organization: WDNet
To: flexfax@sgi.com
Subject: How to faxrm and clean docq?
Sender: owner-flexfax@celestial.com

Dear Sir:

	I have install the hylafax v4.0p1, but I have some problem.

	1. I can not remove a job.
	
	I have seen the FAQ120, and config the file etc/hosts like this:
"root:::F182qdighLJ". When I use 'telnet 0 4559', I can use 'admin' and
'jkill' and 'jdele' to remove a job, but I cant use 'faxrm jid' to
remove a job which is not send by me.

	2. I can not clean the docq.

	When I use faxrm remove a job I do, I can move the jid in sendq, but I
can not move the file in docq, I must use rm manual.

	Can you help me?
	
	Thanks.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 24 Apr 97 07:19:02 EST
From: kanaan@if.ufrgs.br (Antonio Kanaan)
To: flexfax@sgi.com
Subject: faxgetty won't start on my linux system
Sender: owner-flexfax@celestial.com

Hello folks,

A few days ago I wrote the following message:

%I have hylafax 4.0.pl1 on a Linux system (2.0.23 kernel).  

%This is what my modem claims to be when I query it with 'AT I4':

%Telepath 2 14,400/FAX/Voice RS Rev. 2.0

%I am trying to set up faxgetty as my standard getty program and never
%get it to work:


%This is the entry I added to inittab:

%# Serial lines
%s1:45:respawn:/usr/local/sbin/faxgetty cua1

%then I 'init q'

%I get this on /var/adm/messages:

%Apr 15 18:05:55 pcastro7 init: Re-reading inittab
%Apr 15 18:06:40 pcastro7 FaxGetty[975]: Unable to setup modem on /dev/cua1; giving up after 2 attempts
%Apr 15 18:07:59 pcastro7 FaxGetty[990]: CLOSE /dev/cua1
%Apr 15 18:08:00 pcastro7 FaxGetty[992]: OPEN /dev/cua1
%Apr 15 18:08:06 pcastro7 FaxGetty[992]: /dev/cua1: Can not initialize modem.

%And this on /var/adm/syslog:

%Apr 15 18:06:40 pcastro7 FaxGetty[975]: MODEM /dev/cua1 appears to be wedged
%Apr 15 18:07:59 pcastro7 FaxGetty[990]: MODEM /dev/cua1 appears to be wedged

%I strongly suspect I am doing something awfully stupid, but can't find
%what is wrong.  I had similar problems trying to use uu_getty and
%mgetty.


Well I was doing something stupid.  I caught itgetting more detailed
logs.  Then I found in /var/adm/messages:

Apr 19 03:00:34 pcastro7 FaxSend[1043]: --> [2:OK]
Apr 19 03:00:34 pcastro7 FaxSend[1043]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]
Apr 19 03:00:34 pcastro7 FaxSend[1043]: --> [5:ERROR]
Apr 19 03:00:34 pcastro7 FaxSend[1043]: MODEM Command error
Apr 19 03:00:34 pcastro7 FaxSend[1043]: MODEM set DTR OFF

My modem does not have AT&K4.  Once I fixed that faxgetty stopped
dying. It is true that I actually found this while trying to send a
fax not while running faxgetty, but anyway I believe this was the
reason for faxgetty to quit before.  

By the way I was suggested to use 

s1:23:respawn:/usr/local/sbin/faxgetty cua1

(23 instead of 45)

If I do that faxgetty does not run at all...

Hope this helps somebody,

Antonio

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 24 Apr 97 07:42:50 EST
From: kanaan@if.ufrgs.br (Antonio Kanaan)
To: flexfax@sgi.com
Subject: send faxes, but they arrive as garbage
Sender: owner-flexfax@celestial.com

Hello folks,

I have hylafax 4.0.pl1 on a Linux system (2.0.23 kernel).  

This is what my modem claims to be when I query it with 'AT I4':

Telepath 2 14,400/FAX/Voice RS Rev. 2.0

This is a class 1 fax/modem.

I've been trying to send and receive fax for a while now without
success.  I am now able to get my modem to call other phone numbers.
Once the call is completed two things may happen:

1) it does call, the other (FAX) machine answers and I get this:

(In short: it does get to the other machine and it tries to do the
training and never succeeds)

Apr 19 04:38:27.30: [ 1664]: SESSION BEGIN 00000055 55512264940
Apr 19 04:38:27.30: [ 1664]: SEND FAX: JOB 27 DEST 2264940 COMMID 00000055
Apr 19 04:38:27.30: [ 1664]: MODEM set DTR OFF
Apr 19 04:38:27.30: [ 1664]: DELAY 2600 ms
Apr 19 04:38:29.91: [ 1664]: MODEM set DTR ON
Apr 19 04:38:29.91: [ 1664]: MODEM set baud rate: 9600 baud, input flow XON/XOFF, output flow XON/XOFF
Apr 19 04:38:29.91: [ 1664]: MODEM flush i/o
Apr 19 04:38:29.92: [ 1664]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 19 04:38:30.07: [ 1664]: --> [2:OK]
Apr 19 04:38:30.07: [ 1664]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Apr 19 04:38:30.22: [ 1664]: --> [2:OK]
Apr 19 04:38:30.22: [ 1664]: <-- [12:AT+FCLASS=1\r]
Apr 19 04:38:30.37: [ 1664]: --> [2:OK]
Apr 19 04:38:30.37: [ 1664]: <-- [7:ATL1M1\r]
Apr 19 04:38:30.51: [ 1664]: --> [2:OK]
Apr 19 04:38:30.51: [ 1664]: STATE CHANGE: RUNNING -> SENDING
Apr 19 04:38:30.51: [ 1664]: MODEM input buffering enabled
Apr 19 04:38:30.51: [ 1664]: Apply DialString rules to "2264940"
Apr 19 04:38:30.52: [ 1664]: --> return result "2264940"
Apr 19 04:38:30.52: [ 1664]: <-- [12:AT+FCLASS=1\r]
Apr 19 04:38:30.76: [ 1664]: --> [2:OK]
Apr 19 04:38:30.76: [ 1664]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Apr 19 04:38:30.77: [ 1664]: DIAL 2264940
Apr 19 04:38:30.77: [ 1664]: <-- [13:ATDT2264940@\r]
Apr 19 04:38:50.58: [ 1664]: --> [7:CONNECT]
Apr 19 04:38:50.58: [ 1664]: MODEM input buffering disabled
Apr 19 04:38:50.58: [ 1664]: --> HDLC<45:FF C0 04 00 00 9E 00 00 00 41 F0 90 48 00 08 A0 40 A1 13 11 01 01 80 80 92 40 62 A2 4A 72 82 72 22 F2 04 5A 82 E2 F2 04 04 04 C0 72 BA>
Apr 19 04:38:50.58: [ 1664]: --> [2:OK]
Apr 19 04:38:50.59: [ 1664]: <-- [9:AT+FRH=3\r]
Apr 19 04:38:50.61: [ 1664]: --> [7:CONNECT]
Apr 19 04:38:51.16: [ 1664]: --> HDLC<25:FF C0 02 0C 2C 9C 2C 04 6C 4C 4C 04 04 04 04 04 04 04 04 04 04 04 04 B7 55>
Apr 19 04:38:51.17: [ 1664]: --> [2:OK]
Apr 19 04:38:51.17: [ 1664]: REMOTE CSI "226 4940"
Apr 19 04:38:51.17: [ 1664]: <-- [9:AT+FRH=3\r]
Apr 19 04:38:51.20: [ 1664]: --> [7:CONNECT]
Apr 19 04:38:51.43: [ 1664]: --> HDLC<9:FF C8 01 00 72 1D 00 71 24>
Apr 19 04:38:51.44: [ 1664]: --> [2:OK]
Apr 19 04:38:51.44: [ 1664]: REMOTE best rate 9600 bit/s
Apr 19 04:38:51.44: [ 1664]: REMOTE max page width 1728 pixels in 215 mm
Apr 19 04:38:51.44: [ 1664]: REMOTE max unlimited page length 
Apr 19 04:38:51.44: [ 1664]: REMOTE best vres 7.7 line/mm
Apr 19 04:38:51.44: [ 1664]: REMOTE best format 1-D MR
Apr 19 04:38:51.45: [ 1664]: REMOTE best 20 ms, 10 ms/scanline
Apr 19 04:38:51.45: [ 1664]: USE 9600 bit/s
Apr 19 04:38:51.45: [ 1664]: USE 20 ms, 10 ms/scanline
Apr 19 04:38:51.45: [ 1664]: SEND file "docq/doc39.ps;30"
Apr 19 04:38:51.45: [ 1664]: USE page width 1728 pixels in 215 mm
Apr 19 04:38:51.45: [ 1664]: USE unlimited page length 
Apr 19 04:38:51.45: [ 1664]: USE 3.85 line/mm
Apr 19 04:38:51.45: [ 1664]: USE 1-D MR
Apr 19 04:38:51.45: [ 1664]: SEND training at v.29 9600 bit/s
Apr 19 04:38:51.45: [ 1664]: <-- [9:AT+FTH=3\r]
Apr 19 04:38:54.00: [ 1664]: MODEM TIMEOUT: reading line from modem
Apr 19 04:38:54.00: [ 1664]: Error sending T.30 prologue frames
... (lots of training trials)
Apr 19 04:39:09.30: [ 1664]: Error sending T.30 prologue frames
Apr 19 04:39:09.30: [ 1664]: SEND training at v.27ter fallback mode 2400 bit/s
Apr 19 04:39:09.30: [ 1664]: <-- [9:AT+FTH=3\r]
Apr 19 04:39:11.85: [ 1664]: MODEM TIMEOUT: reading line from modem
Apr 19 04:39:11.85: [ 1664]: Error sending T.30 prologue frames
Apr 19 04:39:11.85: [ 1664]: TRAINING failed
Apr 19 04:39:11.85: [ 1664]: <-- [9:AT+FTH=3\r]
Apr 19 04:39:14.40: [ 1664]: --> [0:]
Apr 19 04:39:14.40: [ 1664]: MODEM TIMEOUT: sending HDLC frame
Apr 19 04:39:14.40: [ 1664]: MODEM input buffering enabled
Apr 19 04:39:14.40: [ 1664]: <-- [5:ATH0\r]
Apr 19 04:39:19.40: [ 1664]: MODEM TIMEOUT: reading line from modem
Apr 19 04:39:19.40: [ 1664]: MODEM <Timeout>
Apr 19 04:39:19.40: [ 1664]: MODEM set DTR OFF
Apr 19 04:39:19.40: [ 1664]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Apr 19 04:39:19.41: [ 1664]: SESSION END

2) With other machines (the same thing always happen to a given machine)
the training process works fine, the logs seem to indicate a succesful
transmission, but people on the other side of the line get garbage.
This is the log of one of these sessions (I don't see anything here
that may indicate problems):

Apr 21 12:48:33.19: [ 1520]: SESSION BEGIN 00000059 55513343306
Apr 21 12:48:33.19: [ 1520]: SEND FAX: JOB 32 DEST 3343306 COMMID 00000059
Apr 21 12:48:33.19: [ 1520]: MODEM set DTR OFF
Apr 21 12:48:33.19: [ 1520]: DELAY 2600 ms
Apr 21 12:48:35.80: [ 1520]: MODEM set DTR ON
Apr 21 12:48:35.81: [ 1520]: MODEM set baud rate: 9600 baud, input flow XON/XOFF, output flow XON/XOFF
Apr 21 12:48:35.81: [ 1520]: MODEM flush i/o
Apr 21 12:48:35.81: [ 1520]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 21 12:48:35.96: [ 1520]: --> [2:OK]
Apr 21 12:48:35.96: [ 1520]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Apr 21 12:48:36.11: [ 1520]: --> [2:OK]
Apr 21 12:48:36.11: [ 1520]: <-- [12:AT+FCLASS=1\r]
Apr 21 12:48:36.26: [ 1520]: --> [2:OK]
Apr 21 12:48:36.26: [ 1520]: <-- [7:ATL1M1\r]
Apr 21 12:48:36.40: [ 1520]: --> [2:OK]
Apr 21 12:48:36.40: [ 1520]: STATE CHANGE: RUNNING -> SENDING
Apr 21 12:48:36.40: [ 1520]: MODEM input buffering enabled
Apr 21 12:48:36.40: [ 1520]: Apply DialString rules to "3343306"
Apr 21 12:48:36.40: [ 1520]: --> return result "3343306"
Apr 21 12:48:36.40: [ 1520]: <-- [12:AT+FCLASS=1\r]
Apr 21 12:48:36.65: [ 1520]: --> [2:OK]
Apr 21 12:48:36.86: [ 1520]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Apr 21 12:48:36.96: [ 1520]: DIAL 3343306
Apr 21 12:48:36.96: [ 1520]: <-- [13:ATDT3343306@\r]
Apr 21 12:49:24.22: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:24.22: [ 1520]: MODEM input buffering disabled
Apr 21 12:49:24.22: [ 1520]: --> HDLC<39:FF C0 04 00 00 8C 00 72 1D 00 21 B0 BB 00 00 BB BB 00 00 BB BB BB BB BB E9 20 84 40 C8 82 C0 B7 44 09 00 00 08 30 21>
Apr 21 12:49:24.22: [ 1520]: --> [2:OK]
Apr 21 12:49:24.22: [ 1520]: <-- [9:AT+FRH=3\r]
Apr 21 12:49:24.25: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:24.83: [ 1520]: --> HDLC<25:FF C0 02 04 6C 0C CC CC 2C CC CC D4 8C AC D4 AC AC 04 04 04 04 04 04 B6 9E>
Apr 21 12:49:24.84: [ 1520]: --> [2:OK]
Apr 21 12:49:24.84: [ 1520]: REMOTE CSI "55+51+3343306"
Apr 21 12:49:24.84: [ 1520]: <-- [9:AT+FRH=3\r]
Apr 21 12:49:24.87: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:25.10: [ 1520]: --> HDLC<9:FF C8 01 00 72 1D 00 71 24>
Apr 21 12:49:25.11: [ 1520]: --> [2:OK]
Apr 21 12:49:25.60: [ 1520]: REMOTE best rate 9600 bit/s
Apr 21 12:49:25.60: [ 1520]: REMOTE max page width 1728 pixels in 215 mm
Apr 21 12:49:25.60: [ 1520]: REMOTE max unlimited page length 
Apr 21 12:49:25.60: [ 1520]: REMOTE best vres 7.7 line/mm
Apr 21 12:49:25.60: [ 1520]: REMOTE best format 1-D MR
Apr 21 12:49:25.60: [ 1520]: REMOTE best 20 ms, 10 ms/scanline
Apr 21 12:49:25.60: [ 1520]: USE 9600 bit/s
Apr 21 12:49:25.60: [ 1520]: USE 20 ms, 10 ms/scanline
Apr 21 12:49:25.60: [ 1520]: SEND file "docq/doc44.ps;30"
Apr 21 12:49:25.68: [ 1520]: USE page width 1728 pixels in 215 mm
Apr 21 12:49:25.68: [ 1520]: USE unlimited page length 
Apr 21 12:49:25.68: [ 1520]: USE 3.85 line/mm
Apr 21 12:49:25.68: [ 1520]: USE 1-D MR
Apr 21 12:49:25.68: [ 1520]: SEND training at v.29 9600 bit/s
Apr 21 12:49:25.70: [ 1520]: <-- [9:AT+FTH=3\r]
Apr 21 12:49:25.75: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:25.75: [ 1520]: <-- HDLC<23:FF C0 C2 CC 04 96 4E 46 86 E2 F4 96 CE 96 32 F4 F6 96 76 F6 2E 76 82>
Apr 21 12:49:25.75: [ 1520]: <-- data [23]
Apr 21 12:49:25.75: [ 1520]: <-- data [2]
Apr 21 12:49:27.19: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:27.19: [ 1520]: <-- HDLC<6:FF C8 C1 00 60 10>
Apr 21 12:49:27.19: [ 1520]: <-- data [6]
Apr 21 12:49:27.19: [ 1520]: <-- data [2]
Apr 21 12:49:27.75: [ 1520]: --> [2:OK]
Apr 21 12:49:27.75: [ 1520]: DELAY 75 ms
Apr 21 12:49:27.84: [ 1520]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Apr 21 12:49:27.84: [ 1520]: <-- [10:AT+FTM=96\r]
Apr 21 12:49:28.18: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:28.18: [ 1520]: <-- data [1024]
Apr 21 12:49:28.18: [ 1520]: <-- data [776]
Apr 21 12:49:28.18: [ 1520]: <-- data [2]
Apr 21 12:49:30.17: [ 1520]: --> [2:OK]
Apr 21 12:49:30.17: [ 1520]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Apr 21 12:49:30.17: [ 1520]: <-- [9:AT+FRH=3\r]
Apr 21 12:49:31.27: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:31.39: [ 1520]: --> HDLC<5:FF C8 21 57 BE>
Apr 21 12:49:31.40: [ 1520]: --> [2:OK]
Apr 21 12:49:31.40: [ 1520]: TRAINING succeeded
Apr 21 12:49:31.40: [ 1520]: <-- [10:AT+FTM=96\r]
Apr 21 12:49:31.74: [ 1520]: --> [7:CONNECT]
Apr 21 12:49:31.74: [ 1520]: SEND begin page
Apr 21 12:49:31.74: [ 1520]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Apr 21 12:49:31.77: [ 1520]: <-- data [1028]
... (lots of lines saying the same)
Apr 21 12:49:55.85: [ 1520]: <-- data [1024]
Apr 21 12:49:55.86: [ 1520]: <-- data [874]
Apr 21 12:49:59.85: [ 1520]: SENT 27498 bytes of data
Apr 21 12:49:59.85: [ 1520]: <-- data [768]
Apr 21 12:49:59.85: [ 1520]: SENT 768 bytes of data
Apr 21 12:49:59.86: [ 1520]: SEND 1D RTC
Apr 21 12:49:59.86: [ 1520]: <-- data [29]
Apr 21 12:49:59.86: [ 1520]: <-- data [2]
Apr 21 12:49:59.86: [ 1520]: SEND end page
Apr 21 12:50:01.38: [ 1520]: --> [2:OK]
Apr 21 12:50:01.38: [ 1520]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Apr 21 12:50:01.38: [ 1520]: DELAY 75 ms
Apr 21 12:50:01.47: [ 1520]: SEND send MPS (more pages, same document)
Apr 21 12:50:01.47: [ 1520]: <-- [9:AT+FTH=3\r]
Apr 21 12:50:01.52: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:01.52: [ 1520]: <-- HDLC<3:FF C8 F2>
Apr 21 12:50:01.52: [ 1520]: <-- data [3]
Apr 21 12:50:01.52: [ 1520]: <-- data [2]
Apr 21 12:50:02.72: [ 1520]: --> [2:OK]
Apr 21 12:50:02.72: [ 1520]: <-- [9:AT+FRH=3\r]
Apr 21 12:50:04.66: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:04.78: [ 1520]: --> HDLC<5:FF C8 32 75 EC>
Apr 21 12:50:04.79: [ 1520]: --> [2:OK]
Apr 21 12:50:04.79: [ 1520]: SEND recv RTN (retrain negative)
Apr 21 12:50:04.79: [ 1520]: SEND training at v.29 9600 bit/s
Apr 21 12:50:04.79: [ 1520]: <-- [9:AT+FTH=3\r]
Apr 21 12:50:04.84: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:04.84: [ 1520]: <-- HDLC<23:FF C0 C2 CC 04 96 4E 46 86 E2 F4 96 CE 96 32 F4 F6 96 76 F6 2E 76 82>
Apr 21 12:50:04.84: [ 1520]: <-- data [23]
Apr 21 12:50:04.84: [ 1520]: <-- data [2]
Apr 21 12:50:06.26: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:06.26: [ 1520]: <-- HDLC<6:FF C8 C1 00 60 10>
Apr 21 12:50:06.26: [ 1520]: <-- data [6]
Apr 21 12:50:06.26: [ 1520]: <-- data [2]
Apr 21 12:50:06.84: [ 1520]: --> [2:OK]
Apr 21 12:50:06.84: [ 1520]: DELAY 75 ms
Apr 21 12:50:06.93: [ 1520]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Apr 21 12:50:06.93: [ 1520]: <-- [10:AT+FTM=96\r]
Apr 21 12:50:07.27: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:07.27: [ 1520]: <-- data [1024]
Apr 21 12:50:07.27: [ 1520]: <-- data [776]
Apr 21 12:50:07.27: [ 1520]: <-- data [2]
Apr 21 12:50:09.26: [ 1520]: --> [2:OK]
Apr 21 12:50:09.26: [ 1520]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Apr 21 12:50:09.26: [ 1520]: <-- [9:AT+FRH=3\r]
Apr 21 12:50:10.36: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:10.48: [ 1520]: --> HDLC<5:FF C8 21 57 BE>
Apr 21 12:50:10.49: [ 1520]: --> [2:OK]
Apr 21 12:50:10.49: [ 1520]: TRAINING succeeded
Apr 21 12:50:10.49: [ 1520]: <-- [10:AT+FTM=96\r]
Apr 21 12:50:10.83: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:10.83: [ 1520]: SEND begin page
Apr 21 12:50:10.83: [ 1520]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
Apr 21 12:50:10.84: [ 1520]: <-- data [1028]
Apr 21 12:50:10.84: [ 1520]: <-- data [1024]
Apr 21 12:50:10.84: [ 1520]: <-- data [1024]
Apr 21 12:50:10.84: [ 1520]: <-- data [1027]
Apr 21 12:50:10.84: [ 1520]: <-- data [1031]
Apr 21 12:50:14.84: [ 1520]: <-- data [1025]
Apr 21 12:50:14.84: [ 1520]: <-- data [1025]
Apr 21 12:50:14.84: [ 1520]: <-- data [1024]
...
Apr 21 12:50:34.84: [ 1520]: <-- data [1024]
Apr 21 12:50:34.84: [ 1520]: <-- data [1024]
Apr 21 12:50:34.84: [ 1520]: <-- data [874]
Apr 21 12:50:38.84: [ 1520]: SENT 27498 bytes of data
Apr 21 12:50:38.84: [ 1520]: <-- data [768]
Apr 21 12:50:38.84: [ 1520]: SENT 768 bytes of data
Apr 21 12:50:38.84: [ 1520]: SEND 1D RTC
Apr 21 12:50:38.84: [ 1520]: <-- data [29]
Apr 21 12:50:38.85: [ 1520]: <-- data [2]
Apr 21 12:50:38.85: [ 1520]: SEND end page
Apr 21 12:50:40.45: [ 1520]: --> [2:OK]
Apr 21 12:50:40.47: [ 1520]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
Apr 21 12:50:40.47: [ 1520]: DELAY 75 ms
Apr 21 12:50:40.56: [ 1520]: SEND send MPS (more pages, same document)
Apr 21 12:50:40.56: [ 1520]: <-- [9:AT+FTH=3\r]
Apr 21 12:50:40.61: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:40.61: [ 1520]: <-- HDLC<3:FF C8 F2>
Apr 21 12:50:40.61: [ 1520]: <-- data [3]
Apr 21 12:50:40.61: [ 1520]: <-- data [2]
Apr 21 12:50:41.81: [ 1520]: --> [2:OK]
Apr 21 12:50:41.81: [ 1520]: <-- [9:AT+FRH=3\r]
Apr 21 12:50:43.81: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:43.96: [ 1520]: --> HDLC<5:FF C8 5F C8 E7>
Apr 21 12:50:43.97: [ 1520]: --> [2:OK]
Apr 21 12:50:43.97: [ 1520]: SEND recv DCN (disconnect)
Apr 21 12:50:43.97: [ 1520]: <-- [9:AT+FTH=3\r]
Apr 21 12:50:44.02: [ 1520]: --> [7:CONNECT]
Apr 21 12:50:44.02: [ 1520]: <-- HDLC<3:FF C8 DF>
Apr 21 12:50:44.02: [ 1520]: <-- data [3]
Apr 21 12:50:44.02: [ 1520]: <-- data [2]
Apr 21 12:50:45.22: [ 1520]: --> [2:OK]
Apr 21 12:50:45.22: [ 1520]: MODEM input buffering enabled
Apr 21 12:50:45.22: [ 1520]: <-- [5:ATH0\r]
Apr 21 12:50:45.46: [ 1520]: --> [2:OK]
Apr 21 12:50:45.46: [ 1520]: MODEM set DTR OFF
Apr 21 12:50:45.46: [ 1520]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Apr 21 12:50:45.46: [ 1520]: SESSION END


Sorry for the long message.  As I don't know where the problem is I
thought it would be better to send a log as complete as possible.  I
only erased lines that were clearly repetitive and indicated that with
...


I am sending a PS file.  I also checked the ps2fax scrpt, creating a tiff
file, and checked that file, it looks fine.  Therefore, I believe the
problem is in the transmission process, not in the file conversion.
Thanks,

Antonio

-- 
Antonio Kanaan
Astronomy Postdoc
Instituto de Fisica - Universidade Federal do Rio Grande do Sul
kanaan@if.ufrgs.br
phone = 55.51.3166432
fax   = 55.51.3191762
http://www.if.ufrgs.br/~kanaan

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: How to faxrm and clean docq?
To: wzy@szwd.net.cn
Date: Thu, 24 Apr 1997 17:00:16 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

ZhenYu Wang wrote:
    
    Dear Sir:
    
    	I have install the hylafax v4.0p1, but I have some problem.
    
    	1. I can not remove a job.
    	
    	I have seen the FAQ120, and config the file etc/hosts like this:
    "root:::F182qdighLJ". When I use 'telnet 0 4559', I can use 'admin' and
    'jkill' and 'jdele' to remove a job, but I cant use 'faxrm jid' to
    remove a job which is not send by me.

Actually there is no way to remove a job with faxrm(1) if
you're not the owner of the job (you can't specify "become admin"
with this client).
    
    	2. I can not clean the docq.
    
    	When I use faxrm remove a job I do, I can move the jid in sendq, but I
    can not move the file in docq, I must use rm manual.

No. Please read the manual of faxqclean(1M).

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Alexandre Meissonnier <ameissonnier@dohle.com>
To: "HylaFAX-Mailingliste (E-Mail)" <flexfax@sgi.com>
Subject: RE: Ghostscript binary distribution
Date: Thu, 24 Apr 1997 18:01:24 +0200
Sender: owner-flexfax@celestial.com



-----Original Message-----
From:	Tim Rice [SMTP:tim@trr.metro.net]
Sent:	Wednesday, April 23, 1997 5:17 PM
To:	Alexandre Meissonnier
Cc:	HylaFAX-Mailingliste (E-Mail)
Subject:	Re: Ghostscript binary distribution


On Wed, 23 Apr 1997, Alexandre Meissonnier wrote:

> On my fax server, running SCO 5.0.2, I use the ghostscript binary
> distribution from ftp.sgi.com which, according to the README file, is
> configured to work with HylaFAX. However, I could not convert a single
> postscript document with it so far. Even the e xample postscript files
> in the distribution don't work. Is this a problem of the distribution in
> general or an incompatibility between SCO 5.0.2 and a distribution made
> for SCO 3.2? 
> 
If you followed the instructions, including downloading the 2.6.2 fonts
from prep.ai.mit.edu it should work fine.
It works on the 5.0.2 machine I used to make the HylaFAX OS5 binary.

Someone else on the list running SCO 5.0.2 had gs troubles and also
wanted HP laser support so I made a gs with HP laser suport and it.
For some unknown reason it seemed to fix his gs problems.
Pick it up at ftp://trruw.metro.net/pub/gs.gz


[Alexandre Meissonnier]  
This one doesn't work either. Let me tell you what I did to install ghostscript. Maybe I just forgot something. Otherwise there might be a problem with the configuration of my machine (although I'm not aware of anything special).

First I downloaded gs262-sco3.2v4.2-tar.gz and unpacked it. This archive automatically installs the gs library in /usr/local/lib/ghostscript, so I left this unchanged. 
Then I got ghostscript-fonts-2.6.2.tar.gz and unpacked it in /usr/local/lib/ghostscript/fonts.
That's all, since I found no documentation which told me to adjust e.g. environment variables. 

However, I have the impression that ghostscript cannot find its font files. The error message slightly changes when I set GS_FONTPATH to /usr/local/lib/ghostscript/fonts, but it still doesn't work. 
Here are both error messages. First the one without GS_FONTPATH set:
---
Error: /undefinedfilename in --file--
Operand stack:
    (cheq.ps)  (r)
Execution stack:
    %interp_exit  --nostringval--  --nostringval--  --nostringval--  false  --no
stringval--  --nostringval--  --nostringval--
Dictionary stack:
    537/547  0/20  6/200  30/70
Ghostscript: Unrecoverable error, exit code 1
---
Now the message after GS_FONTPATH=/usr/local/lib/ghostscript;export GS_FONTPATH:
---
While reading gs_fonts.ps:
Error: /undefinedfilename in --file--
Operand stack:
    ()  0  (/usr/local/lib/ghostscript/fonts/*)  (/usr/local/lib/ghostscript/fon
ts/*)  (r)
Execution stack:
    %interp_exit  --nostringval--  --nostringval--  --nostringval--  false  --no
stringval--  --nostringval--  --nostringval--  %loop_continue  --nostringval--
--nostringval--  /usr/local/lib/ghostscript/fonts/*  /usr/local/lib/ghostscript/
fonts/*    --nostringval--  %file_continue  --nostringval--  --nostringval--  --
nostringval--
Dictionary stack:
    422/547  5/200  422/547
Current file position is 5532
---

What's wrong with my installation???

--
Alexandre Meissonnier
Dohle Handelsgruppe Systemberatung GmbH
53719 Siegburg (Germany)
ameissonnier@dohle.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Raul Zighelboim <mango@staff.communique.net>
To: "'Tony Mori'" <tonylist@cobra.compusource.net>,
        "'flexfax@sgi.com'"
	 <flexfax@sgi.com>
Subject: RE: FreeBSD 2.2.1-Release & HFax 4.0pl1
Date: Thu, 24 Apr 1997 16:54:54 -0500
Sender: owner-flexfax@celestial.com


I run into the same problem... then I gave up and installed the package
(3.xx)

>-----Original Message-----
>From:	Tony Mori [SMTP:tonylist@cobra.compusource.net]
>Sent:	Thursday, April 24, 1997 10:04 AM
>To:	flexfax@sgi.com
>Subject:	RE: FreeBSD 2.2.1-Release & HFax 4.0pl1
>
>
>
>On Wed, 23 Apr 1997, Raul Zighelboim wrote:
>
>> try gmake instead of make....
>> 
>> then post again about the next problem.
>> 
>
>You mean the stinking image.h file not being there? or in the tiff
>distrib? or anywhere else for that matter? This is really frustrating.
>I figures out the gmake about 30min after i sent the post, then fought
>for about another hour looking for image.h  
>
>I actually did check the website, the doc's, and the HylaFAQ at
>www.vix.com, and even checked back to 12/96 in the archives of this
>list
>at celestial.com, doing searches for FreeBSD. No luck.
>
>
>any ideas?
>
>
>Tony Mori
>Systems Administrator
>CompuSOURCE Internet Services
>Miami, Fl
>

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 24 Apr 1997 18:44:41 -0400 (EDT)
From: Tony Mori <tonylist@cobra.compusource.net>
To: Raul Zighelboim <mango@staff.communique.net>
cc: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: RE: FreeBSD 2.2.1-Release & HFax 4.0pl1
Sender: owner-flexfax@celestial.com



On Thu, 24 Apr 1997, Raul Zighelboim wrote:

> 
> I run into the same problem... then I gave up and installed the package
> (3.xx)
> 
> >-----Original Message-----
> >From:	Tony Mori [SMTP:tonylist@cobra.compusource.net]
> >Sent:	Thursday, April 24, 1997 10:04 AM
> >To:	flexfax@sgi.com
> >Subject:	RE: FreeBSD 2.2.1-Release & HFax 4.0pl1
> >
> >
> >
> >On Wed, 23 Apr 1997, Raul Zighelboim wrote:
> >
> >> try gmake instead of make....
> >> 
> >> then post again about the next problem.
> >> 
> >
> >You mean the stinking image.h file not being there? or in the tiff
> >distrib? or anywhere else for that matter? This is really frustrating.
> >I figures out the gmake about 30min after i sent the post, then fought
> >for about another hour looking for image.h  
> >
> >I actually did check the website, the doc's, and the HylaFAQ at
> >www.vix.com, and even checked back to 12/96 in the archives of this
> >list
> >at celestial.com, doing searches for FreeBSD. No luck.
> >
> >
> >any ideas?
> >
> >

I actually fixed that, but now have different errors. I edited configure,
and changed SGI2FAX=auto to SGI2FAX=no , did a make clobber, and
./configure, then make, then the NEW errors! guess that's why there's no
4.x package for FreeBSD yet, huh?  ;)


Tony Mori
Systems Administrator
CompuSOURCE Internet Services
Miami, Fl

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Thu, 24 Apr 1997 16:59:50 -0700 (PDT)
From: Tim Rice <tim@trr.metro.NET>
To: Ramon F Herrera <herrera@MIT.EDU>
cc: flexfax@sgi.com
Subject: Re: Linking error on SCO
Sender: owner-flexfax@celestial.com

On Wed, 23 Apr 1997, Ramon F Herrera wrote:

> 
> I am trying to build the latest Hylafax.  I was able to make
> some minor changes and solve several easy problems, but I
> finally got stuck with the error included below.  It seems that
> the function 'gettimeofday' cannot be located at link time, but
> it also seems to be right there in /usr/lib/libc.a
> 
> Any help or pointers will be very much appreciated.

Here is the patch I used to build the SCO OS5 binary on ftp.sgi.com
Be sure to read html/building.html. It mentions a system include file
that needs modification.
I was using the SCO development system so you may have to make additional
changes to work with gcc.

P.S. I sent this patch to Sam shortly before he turned the source over
to Matthias. Hopefully it's been incorporated into the master source.

> 
> Regards,
> 
> -Ramon F. Herrera
> 
> ____________________________________________________________________
> Version Information:
> --------------------------------------------------------------------
> hylafax-v4.0pl1
> OS: SCO OpenServer 5.0.2
> gcc version 2.7-95q4   (downloaded from www.sco.com in binary format)
> libg++ version unknown (downloaded from www.sco.com in binary format)
> GNU Make version 3.75
> GNU sed version 2.05
> GNU Awk 3.0.2
> GNU bash, version 2.00.0(1)-release (i586-unknown-sco3.2v5.0.2)
> diff - GNU diffutils version 2.7
> cmp - GNU diffutils version 2.7
> GNU ar version 2.7
> GNU ranlib version 2.7
> GNU nm version 2.7
> Note about 'ld': Unfortunatedly, there is no GNU ld for SCO, so I
> have to use the vendor-provided 'ld'.
> --------------------------------------------------------------------
> 
[ Error Messages sniped]
> --------------------------------------------------------------------
> 

--
Tim Rice			Multitalents	(707) 887-1469 (voice)
tim@trr.metro.net		Keeper of the HylaFAX SCO binaries
Content-Type: TEXT/PLAIN; charset=US-ASCII; name="sco5.patch"
Content-ID: <Pine.ASV.3.96.970424165950.26525B@trr.metro.NET>
Content-Description: 

*** configure.old Tue Nov 26 15:20:17 1996
--- configure Sun Dec 29 18:36:37 1996
***************
*** 833,838 ****
  	fi
      }
  fi
  if [ "$GCOPTS" ]; then
      Note "Using \"$GCOPTS\" for C compiler options."
  fi
--- 833,843 ----
  	fi
      }
  fi
+ case $TARGET in
+ 	*-sco3.2v5.*)	GCOPTS="$GCOPTS -b elf"
+ 			Note "Setting GCOPTS for ELF Binaries."
+ 		;;
+ esac
  if [ "$GCOPTS" ]; then
      Note "Using \"$GCOPTS\" for C compiler options."
  fi
***************
*** 984,989 ****
      xlC-*-aix*)
  	GCXXOPTS='-qlanglvl=compat -I/usr/lpp/xlC/include -I/usr/include'
  	;;
      *)
  	GCXXOPTS=
  	;;
--- 989,998 ----
      xlC-*-aix*)
  	GCXXOPTS='-qlanglvl=compat -I/usr/lpp/xlC/include -I/usr/include'
  	;;
+     CC-*-sco3.2v5.*)		# cfront-based or cfront-compatible
+ 	GCXXOPTS='+a1 +p -b elf'
+ 	Note "Setting GCXXOPTS for ELF Binaries."
+ 	;;
      *)
  	GCXXOPTS=
  	;;
***************
*** 1180,1185 ****
      case $CXX-$TARGET in
      xlC-*-aix*)	CXXFILE="-+";;
      gcc-*)	CXXFILE="-x c++";;
      esac
  fi
  
--- 1189,1195 ----
      case $CXX-$TARGET in
      xlC-*-aix*)	CXXFILE="-+";;
      gcc-*)	CXXFILE="-x c++";;
+     CC-*-sco3.2v5.*)	CXXFILE="+.c++";;
      esac
  fi
  
***************
*** 1802,1807 ****
      #
      test "$CONFIG_BADEXECVPROTO" || {		# char* const* vs. const char**
  	case $TARGET in
  	*-sco*)		CONFIG_BADEXECVPROTO=yes;;
  	*)		CONFIG_BADEXECVPROTO=no;;
  	esac
--- 1812,1818 ----
      #
      test "$CONFIG_BADEXECVPROTO" || {		# char* const* vs. const char**
  	case $TARGET in
+ 	*-sco3.2v5.*)	CONFIG_BADEXECVPROTO=no;;
  	*-sco*)		CONFIG_BADEXECVPROTO=yes;;
  	*)		CONFIG_BADEXECVPROTO=no;;
  	esac
***************
*** 1812,1817 ****
      fi
      test "$CONFIG_BADEXECVEPROTO" || {		# char* const* vs. const char**
  	case $TARGET in
  	*-sco*)		CONFIG_BADEXECVEPROTO=yes;;
  	*)		CONFIG_BADEXECVEPROTO=no;;
  	esac
--- 1823,1829 ----
      fi
      test "$CONFIG_BADEXECVEPROTO" || {		# char* const* vs. const char**
  	case $TARGET in
+ 	*-sco3.2v5.*)	CONFIG_BADEXECVEPROTO=no;;
  	*-sco*)		CONFIG_BADEXECVEPROTO=yes;;
  	*)		CONFIG_BADEXECVEPROTO=no;;
  	esac
***************
*** 2263,2268 ****
      CheckVarDecl dev_t 'typedef int dev_t;' $TYPES_H stdlib.h
  
      if CheckForIncludeFile osfcn.h; then
  	Note "... configure use of <osfcn.h>"
  	echo '#define HAS_OSFCN_H 1'
  	OSFCNH='osfcn.h'
--- 2275,2284 ----
      CheckVarDecl dev_t 'typedef int dev_t;' $TYPES_H stdlib.h
  
      if CheckForIncludeFile osfcn.h; then
+ 	case $CXX-$TARGET in
+ 	CC-*-sco3.2v5.*)	OSFCNH=
+ 		;;
+ 	*)
  	Note "... configure use of <osfcn.h>"
  	echo '#define HAS_OSFCN_H 1'
  	OSFCNH='osfcn.h'
***************
*** 2266,2271 ****
  	Note "... configure use of <osfcn.h>"
  	echo '#define HAS_OSFCN_H 1'
  	OSFCNH='osfcn.h'
      else
  	OSFCNH=
      fi
--- 2282,2289 ----
  	Note "... configure use of <osfcn.h>"
  	echo '#define HAS_OSFCN_H 1'
  	OSFCNH='osfcn.h'
+ 		;;
+ 	esac
      else
  	OSFCNH=
      fi
*** util/Dispatcher.c++.old Tue Nov 26 15:20:37 1996
--- util/Dispatcher.c++ Sun Dec 29 18:36:37 1996
***************
*** 31,36 ****
  #if HAS_SELECT_H
  #include <sys/select.h>
  #endif
  #include <sys/time.h>
  #include <limits.h>
  
--- 31,37 ----
  #if HAS_SELECT_H
  #include <sys/select.h>
  #endif
+ extern "C" {
  #include <sys/time.h>
  }
  #include <limits.h>
***************
*** 32,37 ****
  #include <sys/select.h>
  #endif
  #include <sys/time.h>
  #include <limits.h>
  
  #include "Dispatcher.h"
--- 33,39 ----
  #endif
  extern "C" {
  #include <sys/time.h>
+ }
  #include <limits.h>
  
  #include "Dispatcher.h"
*** faxd/FaxMachineLog.c++.old Tue Nov 26 15:21:31 1996
--- faxd/FaxMachineLog.c++ Sun Dec 29 18:36:38 1996
***************
*** 24,29 ****
   * OF THIS SOFTWARE.
   */
  #include <ctype.h>
  #include <sys/time.h>
  #include <errno.h>
  
--- 24,30 ----
   * OF THIS SOFTWARE.
   */
  #include <ctype.h>
+ extern "C" {
  #include <sys/time.h>
  }
  #include <errno.h>
***************
*** 25,30 ****
   */
  #include <ctype.h>
  #include <sys/time.h>
  #include <errno.h>
  
  #include "Sys.h"
--- 26,32 ----
  #include <ctype.h>
  extern "C" {
  #include <sys/time.h>
+ }
  #include <errno.h>
  
  #include "Sys.h"
*** html/building.html.old Tue Dec 31 13:42:10 1996
--- html/building.html Tue Dec 31 13:48:06 1996
***************
*** 2216,2221 ****
    #ifdef _NO_PROTOTYPE
  </LISTING>
  
  <A NAME="Solaris"><H3>Solaris Guidance</H3></A>
  
  Under (at least) Solaris 2.3
--- 2216,2251 ----
    #ifdef _NO_PROTOTYPE
  </LISTING>
  
+ These notes pertain to SCO 3.2 v5.0
+ <P>
+ One of SCO's system include files has incorrect function prototypes
+ that cause compilation to fail;
+ The following diff may be applied to the problematic system include file
+ or one may create a patched copy of the file in a private
+ <B>sys</B> directory under the top level of the HylaFAX build tree.
+ 
+ <LISTING>
+ *** /usr/include/sys/syslog.h Thu Dec 26 04:42:27 1996
+ --- sys/syslog.h Fri Dec 27 17:05:11 1996
+ ***************
+ *** 198,204 ****
+   void closelog __P((void));
+   void openlog __P((const char *, int, int));
+   int setlogmask __P((int));
+ ! int vsyslog __P((int, char *, va_list ));
+   __END_DECLS
+   
+   #endif /* !INKERNEL */
+ --- 198,204 ----
+   void closelog __P((void));
+   void openlog __P((const char *, int, int));
+   int setlogmask __P((int));
+ ! int vsyslog __P((int, const char *, va_list ));
+   __END_DECLS
+   
+   #endif /* !INKERNEL */
+ </LISTING>
+ 
  <A NAME="Solaris"><H3>Solaris Guidance</H3></A>
  
  Under (at least) Solaris 2.3
Date: Thu, 24 Apr 1997 18:28:45 -0600 (CST)
From: Amacias Toledo Reyes <atoledo@fenix.sasa.com.ni>
To: flexfax@sgi.com
Subject: Cover Sheet Page
Sender: owner-flexfax@celestial.com


	I have Hylafax installed on a BSDI/OS 2.1 server conected to
        windowsNt server.

	How I can change the cover Sheet page, for one logo made in 
	Ms-Word97 or others graphics?

	How I can send docs made in Ms-Office.xx
        Im using winflex for that but dont work, the fax machine 
        recive the netx message: 
              this job required more memory than is available in 
              this printer ?
        Is this one Hylafax error or winflex error?

        Actually I send the docs :

        1.- Print the docs to one file in Postscript Format(Laserwriter).

	2.- Send the file with winflex, form one terminal conected to winNT

	Can I do that in other way?

        thanks for the help!!

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 09:54:21 +0900 (CDT)
From: ZhenYu Wang <wzy@shell.szwd.net.cn>
To: Matthias Apitz <Matthias.Apitz@SOFTCON.de>
cc: flexfax@sgi.com
Subject: Re: How to faxrm and clean docq?
Sender: owner-flexfax@celestial.com

On Thu, 24 Apr 1997 Matthias.Apitz@SOFTCON.de wrote:

>
> Actually there is no way to remove a job with faxrm(1) if
> you're not the owner of the job (you can't specify "become admin"
> with this client).
>     

Dear Sir:

	Thanks for your help.

	You mean in hylafax v4.0p1, the job can not be controled? I am in
Linux with kernel 2.0.0. If I want to manage the job, how can I do?

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 13:23:30 +1200 (NZST)
From: Phil Abercrombie <Philip.Abercrombie@MCS.VUW.AC.NZ>
To: flexfax@sgi.com
Subject: CGI faxstat  & browser
Sender: owner-flexfax@celestial.com


Here's a useful little tool I put together for monitoring our fax
server.  Put this perl script in your cgi-bin directory and make sure
you modify FAXSERVER as required.  You'll need to get CGI and libNet
from your local CPAN site (see http://www.perl.com/CPAN)

What you get is a tables-based view of the current modem status,
sendq, doneq and recvq, with clickable links to detailed job
information, and clickable links to tiff and postscript documents.

The script attempts to contact the server with the $REMOTE_USER
username and no password.  This is not particularly clever, and I am
open to ideas.

I am also open (wide open!) to suggestions for functionality to add,
(e.g., to emulate faxrm better, to add faxalter-style functions, to
allow users to log in using the fax system password so they can query
their own documents and no others), especially if they come with
user-interface suggestions too!

        -phil

#!/usr/local/bin/perl

use CGI;
use Config;
use Net::FTP;

$FAXSERVER = "downstage";
$HYLAFAX   = 4559;

my $cgi = new CGI;

eval{&main};
if ($@) 
{
  my $a=$@;
  print CGI->header,CGI->start_html("Error"), "<P>", join ("<BR>", split "\n", "$a"), CGI->end_html;
  die $a 
}



sub main
{
  my $hfax = new Net::FTP $FAXSERVER, Port=>$HYLAFAX 
    or die "Can't connect to host $FAXSERVER";
  $hfax->login(CGI->remote_user) 
    or die "Can't login to host $FAXSERVER";
  $hfax->binary;

  if ($cgi->param(ps))
  {
    &psinfo($hfax, $cgi->param(ps))
  }
  elsif ($cgi->param(tiff))
  {
    &tiffinfo($hfax, $cgi->param(tiff))
  }
  elsif ($cgi->param(d)) 
  { 
    &killjob($hfax, $cgi->param(d)) 
  }
  elsif ($cgi->param(j)) 
  { 
    &jobinfo($hfax, $cgi->param(j)) 
  }
  else 
  {
    &faxstat($hfax) 
  }
}

sub list ($@) 
{
  my $hfax = shift;
  my $cx = $hfax->list(@_) || die;
  my @results = <$cx>;
  $cx->close;
  @results;
}

sub list_jobs($@)
{
  my $hfax = shift;
  map do { my %d; @d{a..z,A..Z}=split /$;/; \%d }, list $hfax, @_;
}

sub faxstat 
{
  my $hfax = shift;
  my $jobfmt = join "$;", map "%$_", a..z, A..Z;

  print CGI->header;
  print CGI->start_html("Fax System Status");
  print "<H1>Fax System Status</H1>\n";


  my @status = map [split(/:/)], list $hfax, "status";
 
  $hfax->quot("JOBFMT","\"$jobfmt\"") or die;
  my @send = list_jobs $hfax, "sendq";
  $hfax->quot("JOBFMT","\"$jobfmt\"");
  die $hfax->message unless $hfax->ok;
  my @done = list_jobs $hfax, "doneq";
  $hfax->quot("RCVFMT","\"$jobfmt\"");
  die $hfax->message unless $hfax->ok;
  my @recv = list_jobs $hfax, "recvq";

  print "<H2>Status</H2><TABLE BORDER>\n";  
  for(@status)
  {
    for($_->[1])
    {
      if (/job (\d+)/)
      {
        $cgi->param(j=>$1);
        my $surl = $cgi->self_url;
        s!job (\d+)!job <A href="$surl">$1</a>!g;
        $cgi->delete("j");
      }
    }
    print "<TR>", map( "<TD>$_</TD>", @$_), "</TR>\n";
  }
  print "</TABLE>\n";

  &show_outq( "Jobs in Send Queue", @send );
  &show_outq( "Jobs in Done Queue", @done );
  &show_inq( "Jobs in Receive Queue", @recv );

  print CGI->end_html;
}

sub show_outq
{
  my $title = shift;
  my @jobs = @_;
  
  if (@jobs)
  {  
    print qq{<H2>$title</H2>\n<TABLE BORDER>\n};
    print "<TR>",map "<TH>$_</TH>",
    "Job", "Sender", "To","Dials","Pages","Status";
    print "</TR>\n";
    for(@jobs)
    {
      $_->{e} =~ s/^\+644/+64&nbsp;4&nbsp;/;
      $_->{s} =~ s/ /&nbsp;/g;
      
      $cgi->param(j=>$_->{j});
      my $self = $cgi->self_url;
      print <<JOB;
<TR>
<TD><A HREF="$self">$_->{j}</a></TD>
<TD><A HREF="mailto:$_->{M}">$_->{M}</a></TD>
<TD><TT>$_->{e}</TT></TD>
<TD>$_->{D}</TD>
<TD>$_->{P}</TD>
<TD>$_->{s}</TD>
</TR>
JOB
  ;
    }
    print "</TABLE>\n";
  }
}

sub show_inq
{
  my $title = shift;
  my @jobs = @_;
  my $self = $cgi->self_url;

  if (@jobs)
  {  
    print qq{<H2>$title</H2>\n<TABLE BORDER>\n};
    print "<TR>",map "<TH>$_</TH>",
    "Filename", "Sender/TSI", "Pages","Received@";
    print "</TR>\n";
    for(@jobs)
    {
      $cgi->param(tiff,"recvq/$_->{f}");
      my $self = $cgi->self_url;
      
      print <<JOB;
<TR>
<TD><A HREF="$self">$_->{f}</a></TD>
<TD><TT>$_->{s}</TT></TD>
<TD>$_->{p}$_->{z}</TD>
<TD>$_->{t}</TD>
</TR>
JOB
  ;
    }
    print "</TABLE>\n";
  }
}

sub jobinfo
{
  my $hfax = shift;
  my $job = shift;
  my $cx;
  my $self = CGI->script_name;

  print CGI->header;
  print CGI->start_html("Fax Job Info");

  print "<H1>Job Info for job $job</H1>\n";

  $cx = $hfax->retr( "sendq/q$job" ) || $hfax->retr( "doneq/q$job" ) || die "Cannot retrieve job info";
  my @job=<$cx> or die "No job info available";
  $cx->close or die "Data connection error";

  $cgi->param(d=>$job);
  my $self=$cgi->self_url;
  print qq{<A HREF="$self">Delete Me</A>\n};
  $cgi->delete('d');

  print "<TABLE BORDER>\n";
  for (@job)
  {
    chomp;
    $cgi->delete("poscript","tiff");
    my ($key,$val)=split(/:/,$_,2);
    $val = localtime($val) if $key eq 'tts' || $key =~ /time$/;
    if ($key =~ /postscript|tiff/)
    {     
      my $param = ($& eq postscript)?"ps":"tiff";
      my ($ref) = ($val =~ m!(docq/\S+)!);
      $cgi->param($param,$ref);
      my $self = $cgi->self_url;
      $val =~ s!docq/\S+!<a href="$self">$&</a>!;
    }

    print "<TR><TD>$key</TD><TD>$val</TD></TR>\n";
  }
  print "</TABLE>\n";

  print CGI->end_html;
}

sub psinfo
{
  my $hfax = shift;
  my $psfile = shift;

  $cx = $hfax->retr( $psfile ) || die "Cannot retrieve postscript file";
  my @job=<$cx>;
  $cx->close or die "Data connection error";

  print CGI->header( "application/postscript" );
  print @job;
}

sub tiffinfo
{
  my $hfax = shift;
  my $tiff = shift;

  $cx = $hfax->retr( $tiff ) || die "Cannot retrieve tiff file";
  my @job=<$cx>;
  $cx->close or die "Data connection error";

  print CGI->header( "image/tiff" );
  print @job;
}

sub killjob
{
  my $hfax = shift;
  my $job = shift;
  $hfax->quot( "JSUSP", $job );
  my ($mess,$ok)=($hfax->message, $hfax->ok);
  $hfax->quot( "JDELE", $job );
  die "$mess\n".$hfax->message unless $hfax->ok;
  
  print CGI->redirect( $cgi->self_url );
}

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 11:58:05 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: flexfax@sgi.com
Subject: Probs using 2-D MR on transmission
Sender: owner-flexfax@celestial.com

Hi folks,

...i'm using HylaFAX v4.0pl1 build from source on a Linux box.
The Faxmodem is a MultiTech MT2834ZDXI, which should support 2-D MR
transmissions.

When connecting to a remote fax, that reports itself as 2-D capable,
HylaFAX still selects 1-D MR.

...actually i went for this modem because of this feature...and here in
SA the MT-modem is twice the price of an USR :(

...any hints?...i'll attach a logfile at the end of this mail....

TIA,
   Fred

-----Hylafax-logfile----------------- 
Apr 25 10:59:04.58: [ 2841]: SESSION BEGIN 00000071 27112393701
Apr 25 10:59:04.59: [ 2841]: SEND FAX: JOB 7 DEST xxxxxx COMMID 00000071
Apr 25 10:59:04.59: [ 2841]: DELAY 2600 ms
Apr 25 10:59:07.20: [ 2841]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 25 10:59:07.41: [ 2841]: --> [14:ATE0V1Q0S0=0H0]
Apr 25 10:59:07.41: [ 2841]: --> [2:OK]
Apr 25 10:59:07.41: [ 2841]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Apr 25 10:59:07.58: [ 2841]: --> [2:OK]
Apr 25 10:59:07.58: [ 2841]: <-- [12:AT+FCLASS=2\r]
Apr 25 10:59:07.74: [ 2841]: --> [2:OK]
Apr 25 10:59:07.74: [ 2841]: <-- [10:AT+FTBC=0\r]
Apr 25 10:59:07.90: [ 2841]: --> [2:OK]
Apr 25 10:59:07.90: [ 2841]: <-- [10:AT+FBOR=0\r]
Apr 25 10:59:08.06: [ 2841]: --> [2:OK]
Apr 25 10:59:08.06: [ 2841]: <-- [13:AT+FPHCTO=30\r]
Apr 25 10:59:08.22: [ 2841]: --> [2:OK]
Apr 25 10:59:08.22: [ 2841]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 25 10:59:08.39: [ 2841]: --> [2:OK]
Apr 25 10:59:08.39: [ 2841]: <-- [5:ATM0\r]
Apr 25 10:59:08.55: [ 2841]: --> [2:OK]
Apr 25 10:59:08.55: [ 2841]: <-- [12:AT+FCLASS=2\r]
Apr 25 10:59:08.82: [ 2841]: --> [2:OK]
Apr 25 10:59:08.82: [ 2841]: <-- [10:AT+FTBC=0\r]
Apr 25 10:59:09.08: [ 2841]: --> [2:OK]
Apr 25 10:59:09.08: [ 2841]: <-- [10:AT+FBOR=0\r]
Apr 25 10:59:09.34: [ 2841]: --> [2:OK]
Apr 25 10:59:09.34: [ 2841]: <-- [13:AT+FPHCTO=30\r]
Apr 25 10:59:09.60: [ 2841]: --> [2:OK]
Apr 25 10:59:09.60: [ 2841]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Apr 25 10:59:09.87: [ 2841]: --> [2:OK]
Apr 25 10:59:09.87: [ 2841]: <-- [31:AT+FLID="abcdefghijk"\r]
Apr 25 10:59:10.14: [ 2841]: --> [2:OK]
Apr 25 10:59:10.14: [ 2841]: DIAL xxxxxx
Apr 25 10:59:10.14: [ 2841]: <-- [13:ATDTxxxxxxx@\r]
Apr 25 10:59:27.51: [ 2841]: --> [5:+FCON]
[...]
Apr 25 10:59:30.69: [ 2841]: --> [21:+FDIS:1,3,0,2,1,0,0,2]
Apr 25 10:59:30.69: [ 2841]: --> [2:OK]
Apr 25 10:59:30.69: [ 2841]: REMOTE best rate 9600 bit/s
Apr 25 10:59:30.69: [ 2841]: REMOTE max page width 1728 pixels in 215 mm
Apr 25 10:59:30.69: [ 2841]: REMOTE max unlimited page length 
Apr 25 10:59:30.69: [ 2841]: REMOTE best vres 7.7 line/mm
Apr 25 10:59:30.69: [ 2841]: REMOTE best format 2-D MR
Apr 25 10:59:30.69: [ 2841]: REMOTE best 10 ms, 5 ms/scanline
Apr 25 10:59:30.69: [ 2841]: USE 9600 bit/s
Apr 25 10:59:30.69: [ 2841]: USE 10 ms, 5 ms/scanline
Apr 25 10:59:30.69: [ 2841]: SEND file "docq/doc55.ps;00"
Apr 25 10:59:30.93: [ 2841]: USE page width 1728 pixels in 215 mm
Apr 25 10:59:30.93: [ 2841]: USE unlimited page length 
Apr 25 10:59:30.93: [ 2841]: USE 3.85 line/mm
Apr 25 10:59:30.93: [ 2841]: USE 1-D MR
Apr 25 10:59:30.93: [ 2841]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,2\r]
Apr 25 10:59:31.20: [ 2841]: --> [2:OK]
Apr 25 10:59:31.20: [ 2841]: <-- [7:AT+FDT\r]
Apr 25 10:59:37.04: [ 2841]: --> [21:+FDCS:0,3,0,2,0,0,0,3]
Apr 25 10:59:37.04: [ 2841]: --> [7:CONNECT]
Apr 25 10:59:37.04: [ 2841]: SEND wait for XON
Apr 25 10:59:37.04: [ 2841]: --> [1:^Q]
Apr 25 10:59:37.04: [ 2841]: SEND begin page
Apr 25 10:59:37.11: [ 2841]: <-- data [1028]
[...]

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Subject: fifo error message
Date: Fri, 25 Apr 97 10:39:23 -0000
From: jens martens <jm@ko-en.com>
To: "HylaFAX Mailing List" <flexfax@sgi.com>
Sender: owner-flexfax@celestial.com

hi!

solaris 2.4, sunsparc20, HylaFAX 4.0

problem when sendfaxing:
460 Failed to submit job 2: Unable to open scheduler FIFO: No such device 
or address

read some faq's. does an fifo problem exit on solaris 2.4?
besides that i have the impression faxgetty (although in inittab) 
isnt running correctly.


thanks for some advise.

jens:_)

---------------------------------------------------------------------------

jens martens
hohenzollernstrasse 5
70178 stuttgart, germany
fone: +49 711 6402233
cellular: +49 1727133371
fax: +49 711 6498216
jm@ko-en.com
---------------------------------------------------------------------------

"DOS/WIN based computers manufactured by companies such as IBM, Compaq, 
Tandy, and millions of others, are by far the most popular, with about 70 
million machines in use worldwide. Macintosh fans, on the other hand, 
note that cockroaches are far more numerous than humans, and that numbers 
alone do not denote a higher life form." (New York Times)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Fri, 25 Apr 97 08:03:42 EDT
To: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Tony, "make clobber" doesn't always get everything: for example, if
you've added the HTML options, it doesn't correctly clear that
directory, or any following directories. I suspect that you still have
remnants of the broken Makefiles, etc.

Move your config.local or config.site that you've been editing aside,
delete the source directory, and start from the top. Add changes to
config.local one at a time until you get the combination you want....

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu



-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2CdmT/+ItycgIJRAQG3oQQAhsLr+ItLcdYi0mvjDInKpnWm0OMy4jnz
Krzm/jVBAynRmZM+b+Wz04KpARL6xFkqemiAcAeoi9C18QvRRde6igqwWSqpcaSE
FvH4dTWe0Ekfe4Gh/k39aVE4iOoaAC/48hitVXa46iCCsI1yGvn0bNwyqXZ/b/q3
+tqgv9Dvukk=
=UAiq
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Fri, 25 Apr 97 08:06:57 EDT
To: wzy@shell.szwd.net.cn
Cc: flexfax@sgi.com
Subject: Re: How to faxrm and clean docq?
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


It's not that you can't control the jobs: it's that you can't delete
them as someone else on the network. If you were to, for example, su
to become that person, or tweak their .rhosts and rlogin as root and
rlogin as them in another window, you should then be able to delete
the job as that user.

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2CeXD/+ItycgIJRAQEkcwP8CKXBPQ/8gyQAhA8PZnrSX+G+NB1Xlwsy
ZHr/bI2LdAU4pqmI1k8u/V41T15m6lo8MC3lHR0CJt7gNiuafnvWIlzw3tBDxffW
VWrMm54srR5Xd/EIgu1b5QqB/wLjh4TCQrrMttmcAanhb6goPFtBhshcTvJLWr4D
puxWSbb1YuE=
=/SOB
-----END PGP SIGNATURE-----

From root@rapunzel.rgw-express.de  Wed Feb 17 13:55:07 1999
Sender: root@rapunzel.rgw-express.de
Date: Fri, 25 Apr 1997 14:12:18 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: Phil Watkinson <pkw@elgro.co.uk>
Subject: Re: whfc 0.3c - cannot assign requested address problem

Phil Watkinson wrote:

> Hi, Uli.
> 
> Thanks for your reply; the PCs have only one network card. We have two
> servers ( the main application server running SCO and the email/fax/
> intranet server running Linux ) and about 25 clients (all PCs).
> 
> I have looked at the /etc/services files on both servers, and here's a
> list of the ports allocated between 1024 and 5000 - just in case you can
> see a conflict or other problem :-

Hi,

i couldn't see a problem there. It's really strange. Maybe i'll change 
the networking code of whfc so that it can use more than the range
from 1024 to 5000.

> [ The match last night between Man Utd and Dortmund showed the best of
>   British and German football ].

I am not so interested in football, so i haven't seen the match

have a nice Weekend
Uli
-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 97 08:22:08 EDT
From: Glenn Burkhardt <glenn@aoi.ultranet.com>
To: flexfax@sgi.com
Subject: Probs using 2-D MR on transmission
Sender: owner-flexfax@celestial.com

>  From: Fred Meyer <fred@mediswitch.co.za>
>  Hi folks,
>  
>  ...i'm using HylaFAX v4.0pl1 build from source on a Linux box.
>  The Faxmodem is a MultiTech MT2834ZDXI, which should support 2-D MR
>  transmissions.
>  

Not all ZDX modems support 2D encoding.  Models more than a year or two
old probably do not.  Check by issuing this query:

AT+FDCC=?

The response from a newer model (firmware rev 2.13A or 3.13A) will be

+FDCC=(0-1),(0-5),(0-4),(0-2),(0-2),(0),(0),(0-7)
                                ^
The fifth item                  |
is the encoding capability of the modem.  If this value is '(0)', your
modem only supports 1D encoding.

MultiTech upgraded my modem's firmware for free - give their tech
support line a call.

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 16:13:10 +0200
From: Ulrich Eckhardt <uli@rgw-express.de>
Organization: RGW Express Airfreight GmbH
To: HylaFax Mailing liste <flexfax@sgi.com>
Subject: WHFC 0.3d is ready
Sender: owner-flexfax@celestial.com

Hi,

i have uploaded a WHFC 0.3d. WHFC 0.3c crashes when entering a
ip - number instead of the hostname of the fax host. This bug
is fixed now.

Uli
-- 
Ulrich Eckhardt		                   mailto:uli@rgw-express.de
http://people.frankfurt.netsurf.de/uli
Truly great madness can not be achieved without significant
intelligence. (Henrik Tikkanen)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 10:38:01 -0400 (EDT)
From: Tony Mori <tonylist@cobra.compusource.net>
To: raoul@cirl.meei.harvard.edu
cc: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Sender: owner-flexfax@celestial.com



On Fri, 25 Apr 1997 raoul@cirl.meei.harvard.edu wrote:

HTML problems, I could handle. It's having trouble finding header files
(termiox.h, mkdev.h, crypt.h, net/errno.h), and frankly, so am I. Those
are nowhere in glibc, libg++, /usr/src/*, or even the 4.4BSD-Lite2
distribution!! I've looked EVERYWHERE.


Here's what's missing:


./util/InetTransport.c++  includes Socket.h, which chokes on  net/errno.h
./faxd/ModemServer.c++  chokes on termiox.h  and modem.h
./hfaxd/Login.c++  chokes on crypt.h
./etc/lockname.c  chokes on sys/mkdev.h



> -----BEGIN PGP SIGNED MESSAGE-----
> 
> 
> Tony, "make clobber" doesn't always get everything: for example, if
> you've added the HTML options, it doesn't correctly clear that
> directory, or any following directories. I suspect that you still have
> remnants of the broken Makefiles, etc.
> 
> Move your config.local or config.site that you've been editing aside,
> delete the source directory, and start from the top. Add changes to
> config.local one at a time until you get the combination you want....
> 
> 			Nico Garcia
> 			Engineer, CIRL 
> 			Mass. Eye and Ear Infirmary
> 			raoul@cirl.meei.harvard.edu


					

					Tony Mori
				        Systems Administrator
					CompuSOURCE Internet Services
				        Miami, FL, USA

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 16:41:09 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: Glenn Burkhardt <glenn@aoi.ultranet.com>
cc: flexfax@sgi.com
Subject: Re: Probs using 2-D MR on transmission
Sender: owner-flexfax@celestial.com



On Fri, 25 Apr 1997, Glenn Burkhardt wrote:

> >  From: Fred Meyer <fred@mediswitch.co.za>
> >  Hi folks,
> >  
> >  ...i'm using HylaFAX v4.0pl1 build from source on a Linux box.
> >  The Faxmodem is a MultiTech MT2834ZDXI, which should support 2-D MR
> >  transmissions.
> >  
> 
> Not all ZDX modems support 2D encoding.  Models more than a year or two
> old probably do not.  Check by issuing this query:
> 
> AT+FDCC=?
> 
> The response from a newer model (firmware rev 2.13A or 3.13A) will be
> 
> +FDCC=(0-1),(0-5),(0-4),(0-2),(0-2),(0),(0),(0-7)
>                                 ^
> The fifth item                  |
> is the encoding capability of the modem.  If this value is '(0)', your
> modem only supports 1D encoding.


...yes, that is exactly what the modem reports...

Here's an other hint: 
in the q-file of an unsuccessful attempt, one can find:

signalrate:0 bit/s
dataformat:2-D MMR
jobtype:facsimile
status:No carrier detected

...what does 2-D MMR encoding compared to 2-D MR mean?

TIA,
   fred

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Fri, 25 Apr 97 11:28:06 EDT
To: tonylist@cobra.compusource.net
Cc: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Hmm. net/errno.h should not be searched for if not present on the
system, "configure" should set that. Same for termiox.h, modem.h,
crypt.h, and sys/mkdev.h, all of which have flags which determine
their use, set with the CheckForInclude function in configure.

Have you thrown out your previous compilations and tried to work
from clean source, with only those config.local settings that
you need to alter for new compilation? 

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2DNfT/+ItycgIJRAQE+owQAmvXEhJ5gVd53EV6HmhmvoSWY415P15RE
ugpgp3DvdhwHE3i09jPuk00w0pC1pqXfGClFV1V7V/2lQu49ikYIUDL8W241v3za
B6nqtub2mEVERwwkGHwJAWkct5G8wxcnnQzdQr3iU5Q0hHxLEzTmr1lCApRvtCBr
7HII7vDrxCQ=
=U6R2
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@softcon.de
Subject: Re: Probs using 2-D MR on transmission
To: Fred Meyer <fred@mediswitch.co.za>
Date: Fri, 25 Apr 1997 18:10:27 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias Apitz <Matthias.Apitz@softcon.de>
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Fred Meyer wrote:
    
    Hi folks,
    
    ...i'm using HylaFAX v4.0pl1 build from source on a Linux box.
    The Faxmodem is a MultiTech MT2834ZDXI, which should support 2-D MR
    transmissions.
    
    When connecting to a remote fax, that reports itself as 2-D capable,
    HylaFAX still selects 1-D MR.
    
    ...actually i went for this modem because of this feature...and here in
    SA the MT-modem is twice the price of an USR :(
    
    ...any hints?...i'll attach a logfile at the end of this mail....

remove the spool/info/xxxxxx file for this destination number

	matthias
    
    TIA,
       Fred
    
    -----Hylafax-logfile----------------- 
    Apr 25 10:59:04.58: [ 2841]: SESSION BEGIN 00000071 27112393701
    Apr 25 10:59:04.59: [ 2841]: SEND FAX: JOB 7 DEST xxxxxx COMMID 00000071
    Apr 25 10:59:04.59: [ 2841]: DELAY 2600 ms
    Apr 25 10:59:07.20: [ 2841]: <-- [15:ATE0V1Q0S0=0H0\r]
    Apr 25 10:59:07.41: [ 2841]: --> [14:ATE0V1Q0S0=0H0]
    Apr 25 10:59:07.41: [ 2841]: --> [2:OK]
    Apr 25 10:59:07.41: [ 2841]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
    Apr 25 10:59:07.58: [ 2841]: --> [2:OK]
    Apr 25 10:59:07.58: [ 2841]: <-- [12:AT+FCLASS=2\r]
    Apr 25 10:59:07.74: [ 2841]: --> [2:OK]
    Apr 25 10:59:07.74: [ 2841]: <-- [10:AT+FTBC=0\r]
    Apr 25 10:59:07.90: [ 2841]: --> [2:OK]
    Apr 25 10:59:07.90: [ 2841]: <-- [10:AT+FBOR=0\r]
    Apr 25 10:59:08.06: [ 2841]: --> [2:OK]
    Apr 25 10:59:08.06: [ 2841]: <-- [13:AT+FPHCTO=30\r]
    Apr 25 10:59:08.22: [ 2841]: --> [2:OK]
    Apr 25 10:59:08.22: [ 2841]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
    Apr 25 10:59:08.39: [ 2841]: --> [2:OK]
    Apr 25 10:59:08.39: [ 2841]: <-- [5:ATM0\r]
    Apr 25 10:59:08.55: [ 2841]: --> [2:OK]
    Apr 25 10:59:08.55: [ 2841]: <-- [12:AT+FCLASS=2\r]
    Apr 25 10:59:08.82: [ 2841]: --> [2:OK]
    Apr 25 10:59:08.82: [ 2841]: <-- [10:AT+FTBC=0\r]
    Apr 25 10:59:09.08: [ 2841]: --> [2:OK]
    Apr 25 10:59:09.08: [ 2841]: <-- [10:AT+FBOR=0\r]
    Apr 25 10:59:09.34: [ 2841]: --> [2:OK]
    Apr 25 10:59:09.34: [ 2841]: <-- [13:AT+FPHCTO=30\r]
    Apr 25 10:59:09.60: [ 2841]: --> [2:OK]
    Apr 25 10:59:09.60: [ 2841]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
    Apr 25 10:59:09.87: [ 2841]: --> [2:OK]
    Apr 25 10:59:09.87: [ 2841]: <-- [31:AT+FLID="abcdefghijk"\r]
    Apr 25 10:59:10.14: [ 2841]: --> [2:OK]
    Apr 25 10:59:10.14: [ 2841]: DIAL xxxxxx
    Apr 25 10:59:10.14: [ 2841]: <-- [13:ATDTxxxxxxx@\r]
    Apr 25 10:59:27.51: [ 2841]: --> [5:+FCON]
    [...]
    Apr 25 10:59:30.69: [ 2841]: --> [21:+FDIS:1,3,0,2,1,0,0,2]
    Apr 25 10:59:30.69: [ 2841]: --> [2:OK]
    Apr 25 10:59:30.69: [ 2841]: REMOTE best rate 9600 bit/s
    Apr 25 10:59:30.69: [ 2841]: REMOTE max page width 1728 pixels in 215 mm
    Apr 25 10:59:30.69: [ 2841]: REMOTE max unlimited page length 
    Apr 25 10:59:30.69: [ 2841]: REMOTE best vres 7.7 line/mm
    Apr 25 10:59:30.69: [ 2841]: REMOTE best format 2-D MR
    Apr 25 10:59:30.69: [ 2841]: REMOTE best 10 ms, 5 ms/scanline
    Apr 25 10:59:30.69: [ 2841]: USE 9600 bit/s
    Apr 25 10:59:30.69: [ 2841]: USE 10 ms, 5 ms/scanline
    Apr 25 10:59:30.69: [ 2841]: SEND file "docq/doc55.ps;00"
    Apr 25 10:59:30.93: [ 2841]: USE page width 1728 pixels in 215 mm
    Apr 25 10:59:30.93: [ 2841]: USE unlimited page length 
    Apr 25 10:59:30.93: [ 2841]: USE 3.85 line/mm
    Apr 25 10:59:30.93: [ 2841]: USE 1-D MR
    Apr 25 10:59:30.93: [ 2841]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,2\r]
    Apr 25 10:59:31.20: [ 2841]: --> [2:OK]
    Apr 25 10:59:31.20: [ 2841]: <-- [7:AT+FDT\r]
    Apr 25 10:59:37.04: [ 2841]: --> [21:+FDCS:0,3,0,2,0,0,0,3]
    Apr 25 10:59:37.04: [ 2841]: --> [7:CONNECT]
    Apr 25 10:59:37.04: [ 2841]: SEND wait for XON
    Apr 25 10:59:37.04: [ 2841]: --> [1:^Q]
    Apr 25 10:59:37.04: [ 2841]: SEND begin page
    Apr 25 10:59:37.11: [ 2841]: <-- data [1028]
    [...]

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 12:11:56 -0400 (EDT)
From: Tony Mori <tonylist@cobra.compusource.net>
To: raoul@cirl.meei.harvard.edu
cc: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Sender: owner-flexfax@celestial.com



On Fri, 25 Apr 1997 raoul@cirl.meei.harvard.edu wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> 
> 
> Hmm. net/errno.h should not be searched for if not present on the
> system, "configure" should set that. Same for termiox.h, modem.h,
> crypt.h, and sys/mkdev.h, all of which have flags which determine
> their use, set with the CheckForInclude function in configure.
> 
> Have you thrown out your previous compilations and tried to work
> from clean source, with only those config.local settings that
> you need to alter for new compilation? 
> 
>


Just tried it again...  config.local....you mean ./config.site  ?

I change  #SGI2FAX="auto"    to   #SGI2FAX="no"    to get rid of other
errors. Tried ./configure, then make, same thing. bunch off  net/errno.h
errors, etc...



Tony Mori
Systems Administrator
CompuSOURCE Internet Services

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Fri, 25 Apr 97 12:30:12 EDT
To: tonylist@cobra.compusource.net
Cc: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Tony, it looks like "configure" is not properly doing the 
CheckForInclude test.

./config.local is an optional file that is checked after
./config.site: I use it instead of modifying config.site so that I can
just move config.local to new source distributions and not modify any
source files whatsoever. It uses the same format as config.site, and I
find it easier to pop a couple of select entries there rather than
duplicate and modify all of the original config.site file.

When you say you tried it again: did you delete the entire source
directory and work from scratch? I would consider it vital that you
work from a completely clean source tree at this point.


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2DcDz/+ItycgIJRAQE/gQP8DHMivRueIw2GCSl4u88jqsoF4cxLdnCy
M0Q/RzE/Fu3Yr+7Apzy384v5UvMOe44nXUpyg6iHoHm232LWiHwta8JH+NL8so7t
ouC0hGp6zdugf3dCBfNl13em50gzrgG3dfiVKDVwdL310O/ugTI+MDaEVuaCQqKl
5GJmrDqslt0=
=VuOy
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 12:34:10 -0400 (EDT)
From: Tony Mori <tonylist@cobra.compusource.net>
To: raoul@cirl.meei.harvard.edu
cc: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Sender: owner-flexfax@celestial.com



On Fri, 25 Apr 1997 raoul@cirl.meei.harvard.edu wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> 
> 
> Tony, it looks like "configure" is not properly doing the 
> CheckForInclude test.
> 
> ./config.local is an optional file that is checked after
> ./config.site: I use it instead of modifying config.site so that I can
> just move config.local to new source distributions and not modify any
> source files whatsoever. It uses the same format as config.site, and I
> find it easier to pop a couple of select entries there rather than
> duplicate and modify all of the original config.site file.
> 
> When you say you tried it again: did you delete the entire source
> directory and work from scratch? I would consider it vital that you
> work from a completely clean source tree at this point.
> 
> 
> -----BEGIN PGP SIGNATURE-----
> Version: 2.6.2
> Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface
> 
> iQCVAwUBM2DcDz/+ItycgIJRAQE/gQP8DHMivRueIw2GCSl4u88jqsoF4cxLdnCy
> M0Q/RzE/Fu3Yr+7Apzy384v5UvMOe44nXUpyg6iHoHm232LWiHwta8JH+NL8so7t
> ouC0hGp6zdugf3dCBfNl13em50gzrgG3dfiVKDVwdL310O/ugTI+MDaEVuaCQqKl
> 5GJmrDqslt0=
> =VuOy
> -----END PGP SIGNATURE-----
> 


not only did I clean, I did an rm -R  on the WHOLE hyla source tree ,
re-ungzipped, and de-tarred the file, made the single change to
config.site, and ./configure'd, and make'd !


Tony Mori
Systems Administrator
CompuSOURCE Internet Services

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Fri, 25 Apr 97 13:09:23 EDT
To: tonylist@cobra.compusource.net
Cc: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


OK, I believe you. I just wasn't sure that you had cleaned out the whole
debris from your previous notes.

It seems that the shell subroutine CheckForIncludeFile is not
working correctly in the "configure". The files
that are checked for are
	termios.h || sys/termios.h
	sys/bsdtypes.h
	osfcn.h
	sys/select.h
	net/errno.h
	sys/mkdev.h
	locale.h
	paths.h
	sys/modem.h
	sys/termiox.h
	utmpx.h
	crypt.h

Some of these are not checked for depending on other variables, and
some of them doubtless *do* exist on FreeBSD. I suggest that you run
"sh -x ./configure" and record the results to figure out what is
broken, but I'll bet that it is spuriously detecting non-existent
include files. If this is the case, you should be able to set those
particular flags (such as HAS_CRYPT_H) in your config.local file.

Sam Leffler's shell scripts are very complicated and very cunning, but
this makes them a bit fragile for cross-platform stuff. I suspect
you've run into a shell scripting problem....

			Nico Garcia
			Engineer, CIRL
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2DlAT/+ItycgIJRAQHjLAP/Ri4T71El2S+JDlLidFjg870NGAMKS9Ho
qrut8oKpVCWx25K30SdRgAfS2E84vOfOiBCA7vErFoKHsSm0wpDkHvJhFWCyoq4O
5FEWBKD8Q1uWTtlTjJ2Uqw1IkUrvVFL06bMwgYNw4xuivGCw9/qjpeq8Te4Gsoww
8ecpkSEjKJE=
=6/3b
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 12:10:58 -0600 (CST)
From: ChrisArauz <chris@teranet.teran.com.ni>
To: flexfax@sgi.com
Subject: WHFC client.
Sender: owner-flexfax@celestial.com


	Where can I found the Whfc client complete?

	Actually I download the whfc0.3.zip, but when I try install it 
	Ask for an winhfax.ini file . What format have this file?
      
	Information can email me to atoledo@fenix.sasa.com.ni
      
	Thanks!

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Stefan Soucek <e9325745@student.tuwien.ac.at>
To: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: Re: Cover Sheet Page
Date: Fri, 25 Apr 1997 18:40:25 +-200
Sender: owner-flexfax@celestial.com


>	How I can send docs made in Ms-Office.xx
>        Im using winflex for that but dont work, the fax machine 
>        recive the netx message: 
>              this job required more memory than is available in 
>              this printer ?
>        Is this one Hylafax error or winflex error?

Select "Archive Format" for output in the Laserwriter Postscript Options box.
This will eliminate the error message and print the document instead.

					mfg. Stefan

---------------------------------------------------------
Stefan Soucek
Student of Computer Sience
Technical University Vienna, Austria
e9325745@student.tuwien.ac.at

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 12:09:21 -0700 (PDT)
From: Tim Rice <tim@trr.metro.net>
To: Tony Mori <tonylist@cobra.compusource.net>
cc: raoul@cirl.meei.harvard.edu, flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Sender: owner-flexfax@celestial.com

On Fri, 25 Apr 1997, Tony Mori wrote:

> 
> 
> HTML problems, I could handle. It's having trouble finding header files
> (termiox.h, mkdev.h, crypt.h, net/errno.h), and frankly, so am I. Those
   ^^^^^^^ on BSD?
> are nowhere in glibc, libg++, /usr/src/*, or even the 4.4BSD-Lite2
> distribution!! I've looked EVERYWHERE.
> 
> 
> Here's what's missing:
> 
> 
> ./util/InetTransport.c++  includes Socket.h, which chokes on  net/errno.h
> ./faxd/ModemServer.c++  chokes on termiox.h  and modem.h

If you lookt at faxd/ModemServer.c++  you will see that termiox.h and
modem.h are conditional includes. Check your port.h to see
if HAS_MODEM_H and HAS_TERMIOX are defined. If so check the
configure logs to see what wrong. If they are not in port.h your compiler
may have a problem with the #if directive.
....
#if HAS_MODEM_H
#include <sys/modem.h>
#else
#include <sys/ioctl.h>
#endif
#if HAS_TERMIOX
#include <sys/termiox.h
#endif
....

Termiox caught my eye bacause it's a SVR4 type thing. As far as I know 
BSD doesn't have it. I haven't looked at the other files you're having
trouble with, but I suspect they are all related.

> ./hfaxd/Login.c++  chokes on crypt.h
> ./etc/lockname.c  chokes on sys/mkdev.h
> 
[snip]
> 
> 

--
Tim Rice			Multitalents	(707) 887-1469 (voice)
tim@trr.metro.net

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Fri, 25 Apr 97 16:41:42 EDT
To: tonylist@cobra.compusource.net, flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Reply-To: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


A quick test with Toni's FreeBSD (with permission at his machine)
shows that configure is, indeed, failing to correctly test for the
existence of these include files. It's not clear to me where it fails:
I suspect the runMakeX subroutine....

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2EXAD/+ItycgIJRAQFVEgP+LekzDlKLJO+CmUFciQjUOHY+9ZTMGP91
6zcO/OnDDOcPEkZut52ph0M+vwZ71UGp+OigHZK0UL07WHZYRDpxwYXI/LV8AvWJ
FrFEUwOfp5y7EDWfsB39/M4yduJxbTDDFaXjluE3av43LqpWA3WrAc9mnLkVJFhF
0aSTDRqrVL4=
=wEpn
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Fri, 25 Apr 1997 17:30:24 -0400 (EDT)
From: Tony Mori <tonylist@cobra.compusource.net>
To: flexfax@sgi.com
Subject: Re: FreeBSD 2.2.1-Release & HFax 4.0pl1
Sender: owner-flexfax@celestial.com



On Fri, 25 Apr 1997 raoul@cirl.meei.harvard.edu wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> 
> 
> A quick test with Toni's FreeBSD (with permission at his machine)
> shows that configure is, indeed, failing to correctly test for the
> existence of these include files. It's not clear to me where it fails:
> I suspect the runMakeX subroutine....
> 
> 			Nico Garcia
> 			Engineer, CIRL 
> 			Mass. Eye and Ear Infirmary
> 			raoul@cirl.meei.harvard.edu
> 
>

So....it's not me? Whew! I thought I was going nuts or something!


Tony Mori
Systems Administrator
CompuSOURCE Internet Services

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sat, 26 Apr 1997 17:15:30 +0000
From: Didier Gautheron <dgautheron@magic.fr>
To: flexfax@sgi.com
Subject: Re: Low resulation : retrain negative
Sender: owner-flexfax@celestial.com

Hi

Michael Mller wrote:
> 
> --> [8:+FPTS: 2]                     # I normally get +FPTS: 3 =>ok
> --> [SEND recv RTN (retrain negative)# what does it mean exactly ?
> <-- [6:AT+FK\r]
> --> [9:+FHNG: 50]
> REMOTE HANGUP: Unspecified Transmit Phase D error
> ...
> 
It's easy for a fax to check the data received for conformity with T4.
and if quality is poor
in phase D (at the end of a page) the remote fax could answer :
RTP retrain positive: the page is ok but the remote fax wants to
renegotiate speed for next page
RTN retrain negative: the page is not ok and have to be retransmit after
speed renegotiation if (a big if) the local modem have the capability to
do it.

This problem - remote sends and RTN even when the page seems ok - isn't
uncommon.
May be a new option in sendfax could deal with it (i.e. don't resend on
a RTN ). 

We noticed this problem always on the same faxs with other problems
(class 1 modem):
remote fax is disconnecting without notice after training succeed.
black dots at the page's top
first lines are missing.
too many white lines at the top.

Looks like remote has problems with the first EOL.

And we're testing a workaround:
In T30 specs
>             Note 3 -  Transmission  of  signals  utilizing  the  modulation  system  of
>         Recommendation  V.21  channel  No.  2  should  be  followed   by   a   delay   of
>         75  20 milliseconds before the  signalling,  utilizing  a  different  modulation
>         system commences (e.g. the delay between DCS and  the  Recommendation  V.27  ter,
>        V.29, V.33 or V.17 training sequence).
>               Note 4 - The transmission of signalling utilizing  the  modulation  systems
>         of Recommendations V.27 ter, V.29, V.33 or V.17 should be followed by a delay  of
>         75  20 milliseconds before the  signalling,  utilizing  a  different  modulation
>         system, commences (e.g. the delay between RTC and MPS).
And HylaFAX does it

And in the "FAX MODEM SOURCEBOOK - WILEY" Andrew Margolis wrote 
> The latest version of T.30 includes a recommandation that there should be a wait of 75 ms after > receiving any T.30 signals before sending data at any of the higher speeds.
 So we do it we add a new delay (actually we are testing 2 things : a
delay after training succeed - in test -, and sending a stream of 1
after the second AT+FTM=96 - not tested yet -).

And all problems vanish (maybe) !

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Sun, 27 Apr 1997 15:11:22 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: Matthias Apitz <Matthias.Apitz@softcon.de>
cc: flexfax@sgi.com
Subject: Re: Probs using 2-D MR on transmission
Sender: owner-flexfax@celestial.com



On Fri, 25 Apr 1997 Matthias.Apitz@SOFTCON.de wrote:

> Fred Meyer wrote:
>     
>     Hi folks,
>     
>     ...i'm using HylaFAX v4.0pl1 build from source on a Linux box.
>     The Faxmodem is a MultiTech MT2834ZDXI, which should support 2-D MR
>     transmissions.
>     
>     When connecting to a remote fax, that reports itself as 2-D capable,
>     HylaFAX still selects 1-D MR.
>     
>     ...actually i went for this modem because of this feature...and here in
>     SA the MT-modem is twice the price of an USR :(
>     
>     ...any hints?...i'll attach a logfile at the end of this mail....
> 
> remove the spool/info/xxxxxx file for this destination number
> 

...that does not solve the problem...the info-file for this destination
clearly reports the 2D capability of the remote fax, but hylafax still
selects 1D encoding! :(

hints?

TIA,
   fred

----------info-file:-------
supportsHighRes:yes
supports2DEncoding:yes
supportsPostScript:no
calledBefore:yes
maxPageWidth:1728
maxPageLength:-1
maxSignallingRate:"9600"
minScanlineTime:"10ms/5ms"
remoteCSI:"xxxxxxxxxx"
sendFailures:0
dialFailures:0
lastDialFailure:"No carrier detected"

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: 	Sun, 27 Apr 1997 11:15:20 -0400
From: "D. Hugh Redelmeier" <hugh@mimosa.com>
To: flexfax@sgi.com
Subject: out of memory [was: Re: Cover Sheet Page]
Sender: owner-flexfax@celestial.com

| From: Stefan Soucek <e9325745@student.tuwien.ac.at>

| >	How I can send docs made in Ms-Office.xx
| >        Im using winflex for that but dont work, the fax machine 
| >        recive the netx message: 
| >              this job required more memory than is available in 
| >              this printer ?
| >        Is this one Hylafax error or winflex error?
| 
| Select "Archive Format" for output in the Laserwriter Postscript Options box.
| This will eliminate the error message and print the document instead.

I seem to remember that the problem is that the actual PostScript code
tries to test for sufficient memory and issues this message if it
thinks that there is not enough.  At least some versions of
GhostScript cause this test to fail.  One cure is to use a sed script
or the like to filter out this test.  I don't remember the details,
but I hope this points you in a useful direction.  I think that this
should be covered in the archives a year or more ago.

Hugh Redelmeier
hugh@mimosa.com  voice: +1 416 482-8253

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@softcon.de
Subject: Re: Probs using 2-D MR on transmission
To: Fred Meyer <fred@mediswitch.co.za>
Date: Sun, 27 Apr 1997 17:23:14 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias Apitz <Matthias.Apitz@softcon.de>
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Fred Meyer wrote:
    
    On Fri, 25 Apr 1997 Matthias.Apitz@SOFTCON.de wrote:
    
    > Fred Meyer wrote:
    >     
    >     Hi folks,
    >     
    >     ...i'm using HylaFAX v4.0pl1 build from source on a Linux box.
    >     The Faxmodem is a MultiTech MT2834ZDXI, which should support 2-D MR
    >     transmissions.
    >     
    >     When connecting to a remote fax, that reports itself as 2-D capable,
    >     HylaFAX still selects 1-D MR.
    >     
    >     ...actually i went for this modem because of this feature...and here in
    >     SA the MT-modem is twice the price of an USR :(
    >     
    >     ...any hints?...i'll attach a logfile at the end of this mail....
    > 
    > remove the spool/info/xxxxxx file for this destination number
    > 
    
    ...that does not solve the problem...the info-file for this destination
    clearly reports the 2D capability of the remote fax, but hylafax still
    selects 1D encoding! :(
    
    hints?

Submit a job and check the spool/sendq/qXXXX file for the value of
"desireddf" (should be >0 for 2-D MR) and if you send a PostScript
file (or a text file converted by textfmt(1) to PostScript) make also
sure that ps2fax(1M) use the tiffg32d-driver converting the file to
TIFF/F, e.g. do:

$ gs -h | grep tiffg32d
$ gs -h | grep tiffg3
    x11 tiffg3 pbm pbmraw pgm pgmraw ppm ppmraw

(my gostscript doesn't support tiffg32d).

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 28 Apr 1997 09:37:38 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: wzy@shell.szwd.net.cn
cc: Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: How to faxrm and clean docq?
Sender: owner-flexfax@celestial.com

On Fri, 25 Apr 1997, ZhenYu Wang wrote:

> On Thu, 24 Apr 1997 Matthias.Apitz@SOFTCON.de wrote:
> 
> >
> > Actually there is no way to remove a job with faxrm(1) if
> > you're not the owner of the job (you can't specify "become admin"
> > with this client).
> >     
[snip]
> 	You mean in hylafax v4.0p1, the job can not be controled? I am in
> Linux with kernel 2.0.0. If I want to manage the job, how can I do?

If you really want to delete someone else's job, I posted a patch to
faxrm(1) a couple of weeks ago that you can apply that will allow you
to do just that if you supply a '-a'.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 28 Apr 1997 15:17:22 +0800
From: Stone <stones@iname.com>
To: flexfax@sgi.com
Subject: sinclude problem
Sender: owner-flexfax@celestial.com


Dear all,

I have got into problem when I try to build the hylafax 4.0 patch level
1 on my BSDI machine:

1. When I finish configure and execute "make", there come up the error
messages:

"Makefile", line 42: Need an operator
"Makefile", line 67: Need an operator
"Makefile", line 383: Need an operator 

It seems that there are some syntax error in "Makefile". I have correct
the "include" to ".include" and quote the include file names.

2. When I try to execute "make" again, there comes another error:

"rules", line 197: Need an operator
Fatal errors encountered -- cannot continue

I found that line 197 is follow:
sinclude ${MKDEPFILE}  

Could someone tell me what's going wrong. Thank you!

Best regards,
Stone/<stones@iname.com>
                                       
Date: Mon, 28 Apr 1997 03:47:21 -0400 (EDT)
From: Robert Weiner <robert@progplus.com>
To: flexfax@sgi.com
Subject: Re: hfaxd(1M) dumps core for SNPP on SVR4
Sender: owner-flexfax@celestial.com


Reply to an old email so I included most of it below...

I finally found the time to upgrade my Hylafax to 4.0pl1 under SCO
OpenServer 3.2v4.2 and can confirm the "hfaxd crashing after page" problem
reported by Matthias.  GNU tools: gcc-2.7.0 and libg++-2.7.0a-1.  Modem:
Multitech 2834ZDX.

Did anyone find a fix yet?  (I didn't see a reply to this in the archives) 

I found that 'sendpage -q' (queued page, returns immediately) does not
trigger this bug where 'sendpage' (interactive wait for completion) does. 
Except for the syslog of "HylaFAX: CAUGHT SIGNAL 11" on the hfaxd child
process (which triggers the resulting sendpage error message), everything
else seems to work correctly with the page.

Here's the gdb-4.14 trace (I'm sorry if any line numbers are slightly off,
I was playing around inserting extra malloc/new and free/delete code
during my tests).  Basically, it does seem to always SEGV inside malloc. 

By inserting a 'malloc(128)' call before the 'new' line Matthias mentions
below, I found that it crashes in that malloc(128).  Note that inserting
'malloc(1)' didn't trigger a crash in malloc(1)... but it still crashed in
the 'new'.  I'd say that malloc's internal data structures got trashed
somewhere along the way. 

The gdb-4.14 trace:

Program received signal SIGSEGV, Segmentation fault.
0x6b5c0 in malloc ()
(gdb) where
#0  0x6b5c0 in malloc ()
#1  0x6bebc in __builtin_new (sz=44)
#2  0x1ccf in update__9FileCachePCcR4statUc (pathname=0x410290 "/doneq/q25", sb=0x7ffffa50,
    addToCache=1 '\001') at FileCache.c++:233
#3  0xb652 in findJobOnDisk__13HylaFAXServerPCcR5fxStr (this=0x410850, jid=0x40daa0 "25",
    emsg=0x7ffffb9c) at Jobs.c++:947
#4  0xbb22 in findJob__13HylaFAXServerPCcR5fxStr (this=0x410850, jobid=0x40daa0 "25",
    emsg=0x7ffffb9c) at Jobs.c++:1052
#5  0x260c7 in sendCmd__10SNPPServer (this=0x410850) at SNPPServer.c++:1284
#6  0x23c60 in cmd__10SNPPServer5Token (this=0x410850, t=T_SEND) at SNPPServer.c++:650
#7  0x233cf in parse__10SNPPServer (this=0x410850) at SNPPServer.c++:502
#8  0x730c in inputReady__13HylaFAXServeri (this=0x410850, fd=0) at HylaFAXServer.c++:413
#9  0x33089 in notify__10DispatcheriR6FdMaskN22 (this=0x40f528, nfound=1,
    rmaskret=0x7ffffcb8, wmaskret=0x7ffffca4, emaskret=0x7ffffc90) at Dispatcher.c++:664
#10 0x32cba in dispatch__10DispatcherP7timeval (this=0x40f528, howlong=0x0)
    at Dispatcher.c++:546
#11 0x32a67 in dispatch__10Dispatcher (this=0x40f528) at Dispatcher.c++:508
#12 0x284be in main (argc=7, argv=0x7ffffdc4, envp=0x7ffffde4) at main.c++:319
(gdb)

On Sun, 15 Sep 1996, Matthias Apitz wrote:

> From: Matthias Apitz <Matthias.Apitz@SOFTCON.de>
> Subject: hfaxd(1M) dumps core for SNPP on SVR4
> 
> The hfaxd(1M) child dumps core during SNPP-handling if the job
> is done.  At user-level in sendpage(1) this looks like:
> 
> $ sendpage -p 49171....... "hello world"
> destination pin 49171.......: request id is 32 for host localhost
> sendpage: Service not available, remote server closed connection
> sendpage:
> $
> 
> The page is sent anyway.
> 
> hfaxd(1M) awaits the message from faxq(1M) about the job done
> and then checks with stat(2) for "spool/sendq/q32" and for
> "spool/doneq/q32" (the job is moved to "spool/doneq/" by
> faxq(1M)). While allocating a new FileCache entry in hfaxd/FileCache.c++
> 
> FileCache::update( ... )
> 	...
>     /*
>      * Pathname not found in the cache.
>      */
>     if (Sys::stat(pathname, sb) < 0)
>         return (FALSE);
>     if (addToCache && pathname[0] != '.') {
>         if (fi) {
>             fi = oldest;
>             displaced++;
>         } else {
>             write(99, "newFileCache", strlen("newFileCache")); // DEBUG
>             fi = cache[h] = new FileCache;
>             write(99, "got?", strlen("got?"));                 // DEBUG
>         }
>         fi->name = pathname;
>         fi->serial = master++;
>         fi->sb = sb;
>     }
>     return (TRUE);
> 
> it dumps core. I've added two write(99,.....) statements to locate
> the place in the truss(1)-output of hfaxd(1M):
> 
>         poll(0x08045508, 2, -1)                         = 1
>         read(3, " S *\0", 2047)                         = 3
>         read(3, 0x08046D1C, 2047)                       = 0
>         poll(0x08045628, 2, -1)                         = 1
>         read(3, " !  02\0 :\004\0 cE1 ; 2".., 2047)     = 58
>         xstat(2, "/sendq/q32", 0x08046C58)              Err#2  ENOENT
>         read(3, 0x08046E3C, 2047)                       = 0
>         xstat(2, "/sendq/q32", 0x08047774)              Err#2  ENOENT
>         xstat(2, "/doneq/q32", 0x08047774)              = 0
>         write(99, " n e w F i l e C a c h e", 12)       Err#9  EBADF
>         ^^^^^^^^^^^^^^^^^^^^^^
>             Incurred fault #6, FLTBOUNDS  %pc = 0x0808EC0A
>               siginfo: SIGSEGV SEGV_ACCERR addr=0x00000004
>             Received signal #11, SIGSEGV [caught]
>               siginfo: SIGSEGV SEGV_ACCERR addr=0x00000004
> 
> As you can see from the truss(1) the 2nd write(99....) is not
> reached. I've no idea what should be wrong w/ the statement
> 	....
> 	fi = cache[h] = new FileCache;
> 	....
> 
> It's difficult for me to debug this 'cuze the gcc doesn't
> write debug information on SVR4. For me this looks like
> a "random writing to memory" at some other place.
> 
> Is someone also debuging this problem? Does this problem
> exist also on other systems?
> 
> 	matthias
> 

--
Robert Weiner / Programming Plus	Hardware & Software Consulting
Email: robert@progplus.com		Web: http://www.progplus.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 28 Apr 1997 13:48:43 +0200
From: Hans-Peter Straub <straub@gks.de>
Reply-To: straub@gks.de
Organization: GKS Polygon
To: Hylafax Mailinglist <flexfax@sgi.com>
Subject: received faxes not readable or not in a valid format !!
Sender: owner-flexfax@celestial.com

Hello,

my HylaFax server is running fine with outgoing faxes. Incoming faxes
are received properly, but with several Client tools i.e "imaging"
(win95) are the ???.tif files not readable. The Graphik Workshop returns
-->> File corrupted !! . Have you got an idea about this problem ??

See the log for one of the received faxes attached.

Yours

Hans-Peter
Apr 27 13:12:18.96: [ 9561]: SESSION BEGIN 00000034 107161922241
Apr 27 13:12:18.97: [ 9561]: <-- [4:ATA\r]
Apr 27 13:12:29.02: [ 9561]: --> [4:+FCO]
Apr 27 13:12:29.06: [ 9561]: ANSWER: FAX CONNECTION
Apr 27 13:12:29.07: [ 9561]: RECV FAX: begin
Apr 27 13:12:31.39: [ 9561]: --> [26:+FTI:      49 7161 929444 ]
Apr 27 13:12:31.39: [ 9561]: REMOTE TSI "49 7161 929444"
Apr 27 13:12:31.40: [ 9561]: --> [20:+FCS:0,3,0,2,1,0,0,3]
Apr 27 13:12:31.40: [ 9561]: REMOTE wants 9600 bit/s
Apr 27 13:12:31.40: [ 9561]: REMOTE wants page width 1728 pixels in 215 mm
Apr 27 13:12:31.40: [ 9561]: REMOTE wants unlimited page length 
Apr 27 13:12:31.40: [ 9561]: REMOTE wants 3.85 line/mm
Apr 27 13:12:31.40: [ 9561]: REMOTE wants 2-D MR
Apr 27 13:12:31.40: [ 9561]: --> [2:OK]
Apr 27 13:12:31.41: [ 9561]: <-- [7:AT+FDR\r]
Apr 27 13:12:32.98: [ 9561]: --> [20:+FCS:0,3,0,2,1,0,0,3]
Apr 27 13:12:32.98: [ 9561]: REMOTE wants 9600 bit/s
Apr 27 13:12:32.99: [ 9561]: REMOTE wants page width 1728 pixels in 215 mm
Apr 27 13:12:32.99: [ 9561]: REMOTE wants unlimited page length 
Apr 27 13:12:32.99: [ 9561]: REMOTE wants 3.85 line/mm
Apr 27 13:12:32.99: [ 9561]: REMOTE wants 2-D MR
Apr 27 13:12:33.32: [ 9561]: --> [7:CONNECT]
Apr 27 13:12:33.32: [ 9561]: RECV: begin page
Apr 27 13:12:33.33: [ 9561]: RECV: send trigger 022
Apr 27 13:12:33.33: [ 9561]: <-- data [1]
Apr 27 13:12:45.63: [ 9561]: RECV: 11950 bytes of data, 588 total lines
Apr 27 13:12:45.64: [ 9561]: --> [16:+FPS:1,247,2,2,0]
Apr 27 13:12:46.96: [ 9561]: --> [6:+FET:2]
Apr 27 13:12:46.96: [ 9561]: RECV recv EOP (no more pages or documents)
Apr 27 13:12:46.97: [ 9561]: --> [2:OK]
Apr 27 13:12:47.18: [ 9561]: RECV send MCF (message confirmation)
Apr 27 13:12:47.19: [ 9561]: RECV FAX (00000034): from 49 7161 929444, page 1 in 0:16, INF, 3.85 line/mm, 2-D MR
Apr 27 13:12:47.22: [ 9561]: RECV FAX (00000034): recvq/fax00006.tif from 49 7161 929444, route to <unspecified>, 1 pages in 0:18
Apr 27 13:12:47.25: [ 9561]: <-- [7:AT+FDR\r]
Apr 27 13:12:50.12: [ 9561]: --> [7:+FHS:00]
Apr 27 13:12:50.12: [ 9561]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Apr 27 13:12:50.13: [ 9561]: RECV FAX: bin/faxrcvd "recvq/fax00006.tif" "ttyS0" "00000034" ""
Apr 27 13:12:52.10: [ 9561]: RECV FAX: end
Apr 27 13:12:52.11: [ 9561]: SESSION END

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 28 Apr 1997 15:07:45 +0300
To: flexfax@sgi.com
From: Mario Misic <mario@laus.hr>
Subject: WHFC client still having problems 
Sender: owner-flexfax@celestial.com

HI folks !

I have installed HYLAFAX 4.0pl0 on AIX-3.2.5 and software is running corectly.

I have as a client NT-4.0 server with whfc-0.3a-d. 
All versions of whfc are running OK, I have not got problems with NT-4.0.

My problems are on Win95.

whfc0.3.exe             HANGS 
whfc0.3a_dynamic.exe    STILL HANGS
whfc0.3b_static.exe     STILL HANGS

I notice that WHFC hang when client receive an error (busy line, no answer,
no dial tone e.t.c), but when sending is succesfully everything after works
fine. 


whfc0.3c_dynamic.exe    
When sending file, client gives me this warning  "Cannot build data
connection: Connection refused", then sending is aborted. This is also
happening with whfc0.3d_dynamic.exe.

I tried all suggestions from mailing list but problems are not solved.


This is strange because all versions of WHFC client works fine on NT-4.0. 

Server with NT-4.0 is:
686-200Mhz
32Mb RAM

Server with WIN95 is:
Pentium 133Mhz
16Mb RAM


Please E-mail me any suggestions what to do !!!!!!!!!!

P.S
Please, don't suggest to install NT-4.0 an all machines in firm !!


Thanks

Mario Misic




    

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Mon, 28 Apr 97 10:35:12 EDT
To: flexfax@sgi.com
Subject: Re: sinclude problem
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Stone, the problem is the version of "make" you are using. "configure"
is supposed to figure out what kind of "make" you are using, and give
the right options, but that kind of shell-scripting and
auto-configuration is an art form. Clean out your installation, restore
it from source, and run "configure" again to see how it wound up with
the wrong include.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2S1mj/+ItycgIJRAQFO3AQAm674lSWMguDNm4CWFlCfTqZRcHrLp8bP
pqXyXAR+v/BtS8KDuSmxExg4WS9xVFtd3IHGfzrvxioT7rbK1H53Mri2BUunJuM/
dKfICYs5Z2eBcxT1laaAZW44t6QKhPLSBj4LdFSUUpa1nXSdswCi7sGzksd7ijWr
ZNyVHlP1GQs=
=zm1I
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Mon, 28 Apr 97 10:38:33 EDT
To: straub@gks.de
Cc: flexfax@sgi.com
Subject: Re: received faxes not readable or not in a valid format !!
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Hans, the received faxes are not "merely" TIFF, but are tiffg3, the
fax format. Since Sam Leffler (who wrote HylaFAX) also created TIFF,
I'm willing to accept his word that it is the correct way to label
them.  But on my systems, I modified faxrcvd to call the received
faxes faxxxxx.fax instead of faxxxxx.tif, to make it easier to tell
what format it is for web viewers, etc.

Try using "viewfax" under a UNIX system, available from
ftp://ftp.sgi.com/sgi/fax/contrib/

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2S2YT/+ItycgIJRAQEMkwQAh9o77xQjhi+4pKKH7ZWgxksyC1opBLw4
Z5CtZ2K5INOrPFo5aufEtji47unJjXbzLsU4c6/0o8jSMAdRIIyetlIq23t11zpy
xoyVHZYlPFYRtWbRay2RjD6kJS0HB9WMucelJdXc5vIYE79WJKX0eXO1MnY+1Kpj
FxniDkqZlRo=
=wj49
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: received faxes not readable or not in a valid format !!
To: straub@gks.de
Date: Mon, 28 Apr 1997 17:53:22 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Hans-Peter Straub wrote:
    
    Hello,
    
    my HylaFax server is running fine with outgoing faxes. Incoming faxes
    are received properly, but with several Client tools i.e "imaging"
    (win95) are the ???.tif files not readable. The Graphik Workshop returns
    -->> File corrupted !! . Have you got an idea about this problem ??
    
    See the log for one of the received faxes attached.

Try using

$ fax2ps xxxxxx.tif > /tmp/xxxxxx.ps

and if that produces a printable PostScript file you should
check your tools whether they can "image" a TIFF/F file.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
X-Authentication-Warning: amahoro.dha.unon.org: ben owned process doing -bs
Date: Mon, 28 Apr 1997 15:43:07 -0300 (GMT+3)
From: Ben Parker <ben@dha.unon.org>
To: flexfax@sgi.com
Subject: faxmail MIME/CIME converters - gif2tiff
Sender: owner-flexfax@celestial.com


Could someone be so kind as to post me an example of how to implement
external converters for faxmail? I have worked out where to put the
scripts eg .../faxmail/image/gif for example, but the command line syntax
escapes me. For gif2tiff, for example, the program wants inputfile
outputfile. Inputfile is taken care of by faxmail. What/where do I give it
for output file? 

Thanks,

Ben

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Mon, 28 Apr 1997 13:05:38 -0600 (CST)
From: ChrisArauz <chris@teranet.teran.com.ni>
To: "D. Hugh Redelmeier" <hugh@mimosa.com>
cc: flexfax@sgi.com, e9325745@student.tuwien.at
Subject: Re: out of memory (dont work).
Sender: owner-flexfax@celestial.com


> | From: Stefan Soucek <e9325745@student.tuwien.ac.at>
> 
> | >	How I can send docs made in Ms-Office.xx
> | >        Im using winflex for that but dont work, the fax machine 
> | >        recive the netx message: 
> | >              this job required more memory than is available in 
> | >              this printer ?
> | >        Is this one Hylafax error or winflex error?
> | 
> | Select "Archive Format" for output in the Laserwriter Postscript Options box.
> | This will eliminate the error message and print the document instead.
> 
> I seem to remember that the problem is that the actual PostScript code
> tries to test for sufficient memory and issues this message if it
> thinks that there is not enough.  At least some versions of
> GhostScript cause this test to fail.  One cure is to use a sed script
> or the like to filter out this test.  I don't remember the details,
> but I hope this points you in a useful direction.  I think that this
> should be covered in the archives a year or more ago.
> 
> Hugh Redelmeier
> hugh@mimosa.com  voice: +1 416 482-8253
> 
------------------------------------------
	Thanks!!! 
	I try whit both sugestions,
	But dont work yet.
	I print the doc to a file (using a Laserwriter Plus)
        and then I send it whit Winflex.
	I can see and print the file using Gsview.
	I dont know what it could be.  
	

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 29 Apr 1997 01:58:24 +0200
From: Michael Agbaglo <byteshif@cs.tu-berlin.de>
To: flexfax@sgi.com
Subject: Linux RedHat 4.1, HylaFAX 4.0pl1 --> serveral errors
Sender: owner-flexfax@celestial.com

1. The stuff won't install due to 4 fizzed up Makefiles in

/man/cman.apps
/man/cman.files
/man/sman.apps
/man/sman.files

I edited them by hand ( '/' was missing... )

2. faxsetup didn't work properly, hanged during alias creation

3. It doesn't recognize my modem ( ZyXEL Omni288S ), although it appears
in the garbage thrown on the screen...

4. faxgetty doesn't installed. When I invoke it by hand (or via inittab)
it terminates w/o comment leaving DTR on 


ARRRRRGH !



-- 
Die SQL-Sprache des Microsoft Jet-Datenbankmoduls ist grundsätzlich zu
ANSI-89 Level 1 kompatibel.
Allerdings sind einige ANSI SQL-Funktionen in der SQL-Sprache des
Jet-Datenbankmoduls nicht implementiert.
(MS Access, Stichwort: ANSI-89)

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 29 Apr 1997 10:26:51 +0800
From: Stone <stones@iname.com>
To: flexfax@sgi.com
Subject: sinclude problem
Sender: owner-flexfax@celestial.com

Dear all,

Thank you for your support. I have found out the problem myself. In the
BSDI 3.0
system, we must use the 'GNU gmake' instead of 'make'.

Best regards,
Stone/Vitek

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: Linux RedHat 4.1, HylaFAX 4.0pl1 --> serveral errors
To: byteshif@cs.tu-berlin.de (Michael Agbaglo)
Date: Tue, 29 Apr 1997 08:04:57 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Michael Agbaglo wrote:
    
    1. The stuff won't install due to 4 fizzed up Makefiles in
    
    /man/cman.apps
    /man/cman.files
    /man/sman.apps
    /man/sman.files
    
    I edited them by hand ( '/' was missing... )

Please explain in detail which Makefile(s) are wrong and provide
a patch for the .in files if there are bugs.
    
    2. faxsetup didn't work properly, hanged during alias creation

Again please provide more information what's wrong (e.g. run
faxsetup(1M) with "sh -x ./faxsetup").
    
    3. It doesn't recognize my modem ( ZyXEL Omni288S ), although it appears
    in the garbage thrown on the screen...

Please try to understand how the creation of the modem config file
from the prototype files works and modify one of the existing
prototype files for the ZyXEL's (don't break the other types of
ZyXEL's) or create a new one for the ZyXEL Omni288S and post it
to me.
    
    4. faxgetty doesn't installed. When I invoke it by hand (or via inittab)
    it terminates w/o comment leaving DTR on 
    
Why faxgetty(1M) didn't istall?
    
    ARRRRRGH !

Again, please provide more information. "ARRRRRGH" doesn't fit.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 29 Apr 1997 11:04:32 +0200 (SAT)
From: Fred Meyer <fred@mediswitch.co.za>
To: Michael Agbaglo <byteshif@cs.tu-berlin.de>
cc: flexfax@sgi.com
Subject: Re: Linux RedHat 4.1, HylaFAX 4.0pl1 --> serveral errors
Sender: owner-flexfax@celestial.com



On Tue, 29 Apr 1997, Michael Agbaglo wrote:

> 1. The stuff won't install due to 4 fizzed up Makefiles in
> 
> /man/cman.apps
> /man/cman.files
> /man/sman.apps
> /man/sman.files
> 
> I edited them by hand ( '/' was missing... )
> 
> 2. faxsetup didn't work properly, hanged during alias creation
> 
> 3. It doesn't recognize my modem ( ZyXEL Omni288S ), although it appears
> in the garbage thrown on the screen...
> 
> 4. faxgetty doesn't installed. When I invoke it by hand (or via inittab)
> it terminates w/o comment leaving DTR on 
> 

...it compiled and installed with only one minor problem on our Redhat4.1
The adduser/useradd script in faxsetup is not matching the parameters of
the real function supplied with this linux distribution....besides that,
all had gone smoothly.

regards,
      fred

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 29 Apr 1997 18:35:45 +0800
To: Ted Garaventa <tsg@cctg.com>
From: CARY LEUNG <cary@cary.com>
Subject: Re: HylaFax 4.0 for solaris x86
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

At 10:37 AM 1997/4/28 -0700, you wrote:
>Is Hylafax V 4 available for Solaris-x86 2.5.1 in a pkgadd format?
>I already have V 4 in tar format but cannot get past the make install
>part. 
>-- 
>Ted
>
>*********************************************************************
>*                  T E D   G A R A V E N T A                        *
>*           C C T G   I N T E R N E T   S E R V I C E S             *
>*                        tsg@cctg.com                               *
>*                        P.O. Box 174                               *
>*                    San Ramon, CA  94583                           *
>*                      1 (510) 830 5110                             *
>*********************************************************************
>
>
Dear Ted,

Have you read the INSTALL file, You can not use pkgadd to install, and you must
install some software before, this notice in INSTALL file.

Cary Leung
cary@cary.com
(System Administrator)
CARYCOM (H.K.) LTD
TEL: +(852)-2803-5650
FAX: +(852)-2575-0992

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 29 Apr 1997 06:59:17 -0500
From: Neal Dalton <nrd@usmainstream.net>
To: Gabriel Fernandez <fernande@CS.Sc.EDU>
CC: flexfax@sgi.com
Subject: Re: HylaFAX v4.0pl1  with USR Courier V.Everything
Sender: owner-flexfax@celestial.com

Gabriel Fernandez wrote:
> 
> To whom it may concern:
> 
>    I downloaded the latest version of HylaFAX (V4.0pl1) and tried to use
> it with my USR Courier V.Everything. Unfortunately it does not work. Here
> is a description of the model and the incompatibilities/bugs that I found.
> 
> MODEM:
>   Manufacturer: U.S. Robotics
>   Model: Courier V.Everything
>   Latest Firmware Revision Tried: Supervisor 09/20/96 DSP 07/29/96
> 
> OPERATING SYSTEM:
>   Linux Distribution: Slackware96
>   Linux Kernel Version: 2.0.27
>   GCC Version: 2.7.2
>   TIFF Library Version: 3.4
> 
> SYSTEM:
>   CPU: Pentium 75MHz
>   RAM: 64MB
> 
> INFO:
>   My system is stnadalone, so I would like just to send and receive faxes
> in the simplest way. This seems not to be possible. I don't seems to find
> information about running the client programs without too much hussle.
> 
>   I have decided to use the fax server to try the program. However, I
> always get the same error, it does not matter what program I call.
> 
> >faxstat
> Service not available, remote server closed connection
> >ftp localhost 4559
> Connected to localhost.
> 421 Service not available, remote server has closed connection
> ftp> quit
> >telnet localhost 4559
> Trying 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
> Connection closed by foreign host.
> >
> 
>    I have gone through all the man pages and the troubleshooting
> documentation. There is not any error similar to this one. I checked that
> the compilation procedure was bug-free and everything checked correctly
> except for a couple of getty programs (/sbin/vgetty and /sbin/egetty),
> which I read are not indispensible.
> 
>    I have run hfaxd with inetd and alone. I has not worked either way.
> 
>    Messages in /var/adm/messages are
> 
> Jan 11 01:53:53 apricot HylaFAX[1301]: HylaFAX INET Protocol Server: restarted.
> 
>    Messages in /var/adm/syslog are
> 
> Jan 11 01:45:55 apricot HylaFAX[1257]: CAUGHT SIGNAL 11
> Jan 11 01:49:01 apricot HylaFAX[1283]: CAUGHT SIGNAL 11
> Jan 11 01:53:30 apricot HylaFAX[1225]: CAUGHT SIGNAL 11
> 
> (one for everytime the connection was dropped).


I had this problem and spent a weekend tracing it down to my /etc/hosts 
file had the wrong perms.  I was able to do a lookup in the hosts file,
so it went to DNS, where it was defined.

Neal

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
X-Authentication-Warning: poplar.cs.sc.edu: fernande owned process doing -bs
Date: Tue, 29 Apr 1997 11:27:04 -0400 (EDT)
From: Gabriel Fernandez <fernande@CS.Sc.EDU>
Reply-To: Gabriel Fernandez <fernande@CS.Sc.EDU>
To: Neal Dalton <nrd@usmainstream.net>
cc: flexfax@sgi.com
Subject: Re: HylaFAX v4.0pl1 with USR Courier V.Everything
Sender: owner-flexfax@celestial.com

Hi Neal:

> I had this problem and spent a weekend tracing it down to my /etc/hosts 
> file had the wrong perms.  I was able to do a lookup in the hosts file,
> so it went to DNS, where it was defined.

   Thanks for the message. What exactly was the problem with the
/etc/hosts file?  I found that the problem was a little more complicated
that that.  Linux boxes do not have DNS running by default.  They do not
have a network defined either. You basically do not need it.  HylaFAX,
however, needs a "network" and an IP number in order to run the FAX
daemon.

   I ended up defining a "dummy" network and a "fake" IP number for my
localhost, so that I was able to run the daemon and all the other
programs.

   I had the same problem with 'rplay'. I don't understand the usefulness
of having a daemon running instead of a simple process for standalone
machines. These programs seem to be designed for more demanding tasks.

   Anyway, let me know if you are referring to a different problem.

   Thanks,

	Gabriel

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: "Bernd Duerrer" <duerrer@aea.ruhr-uni-bochum.de>
To: "Hylafax" <flexfax@sgi.com>
Subject: Modem does not support document page width
Date: Tue, 29 Apr 1997 17:57:59 +0200
Sender: owner-flexfax@celestial.com

The HylaFAX software runs fine when ASCII-files are passed to sendfax, but
when using a postscript file, HylaFAX connects to the fax machine, but the
fax is not sent. In the log, there is the following message:

Apr 29 16:28:57 6D:goliath FaxSend[5213]: Modem does not support document
page width, max page width 1728 pixels, image width 1686 pixels

What does this message exactly mean: is it a problem of the sending modem
or of the receiving fax machine?

The problem only occurs, when passing postscript files on to sendfax. The
conversion is done with Ghostscript v4.03. When I convert the postscript
file manually to a TIFF file using Ghostscript with the same parameters
HylaFAX passes through the ps2fax.gs script, the resulting TIFF file can be
sent with sendfax.

Any hint for solving this problem is very much appreciated!

Bernd

-------------------------------------------------------------------------
Dipl.-Ing. Bernd Duerrer
Institute of Communication Acoustics
IC 1/132
Ruhr-Universitaet Bochum
44780 Bochum, Germany
Tel.: +49-234-700-3481
Fax: +49-234-7094-165
e-mail: duerrer@ika.ruhr-uni-bochum.de

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
To: "Bernd Duerrer" <duerrer@aea.ruhr-uni-bochum.de>
Cc: flexfax@sgi.com
Subject: Re: Modem does not support document page width 
Date: Tue, 29 Apr 1997 19:12:15 +0100
From: "Mr. Arlington Hewes" <tpcadmin@info.tpc.int>
Sender: owner-flexfax@celestial.com

In message <199704291557.RAA25644@rapido.aea.ruhr-uni-bochum.de>, "Bernd Duerre
r" writes:
>The HylaFAX software runs fine when ASCII-files are passed to sendfax, but
>when using a postscript file, HylaFAX connects to the fax machine, but the
>fax is not sent. In the log, there is the following message:
>
>Apr 29 16:28:57 6D:goliath FaxSend[5213]: Modem does not support document
>page width, max page width 1728 pixels, image width 1686 pixels
>
>What does this message exactly mean: is it a problem of the sending modem
>or of the receiving fax machine?

I have noticed similar behaviour, as detailed below:

info on the destination:

supportsHighRes:yes
supports2DEncoding:yes
supportsPostScript:no
calledBefore:yes
maxPageWidth:1728
maxPageLength:-1
maxSignallingRate:"9600"
minScanlineTime:"10ms/5ms"
remoteCSI:"01455 251020"
sendFailures:12
lastSendFailure:"Client does not support document page width, max remote page 
wi
dth 1728 pixels, image width 1734 pixels"
dialFailures:0
lastDialFailure:"No answer (T.30 T1 timeout)"

SYSLOG says:

Apr 24 10:02:03 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri 127 tts 0:00 killtime 23:58:37): PREPARE START
Apr 24 10:02:03 fax-gw FaxQueuer[5450]: JOB 28427 (active dest +44145525xxxx 
pri 127 tts 0:00 killtime 23:58:37): CONVERT DOCUMENT: bin/ps2fax -o docq/doc28448.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28448.ps.28427

Apr 24 10:02:07 fax-gw FaxQueuer[5450]: JOB 28427 (active dest +44145525xxxx pri 127 tts 0:00 killtime 23:58:33): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28449.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28449.ps.28427
Apr 24 10:02:08 fax-gw FaxQueuer[5450]: JOB 28427 (active dest +44145525xxxx 
pri 127 tts 0:00 killtime 23:58:32): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28450.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28450.ps.28427
Apr 24 10:02:10 fax-gw FaxQueuer[5450]: JOB 28427 (active dest +44145525xxxx 
pri 127 tts 0:00 killtime 23:58:30): CONVERT DOCUMENT: bin/ps2fax -o docq/doc28451.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28451.ps.28427
Apr 24 10:02:11 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
127 tts 0:00 killtime 23:58:29): PREPARE DONE
Apr 24 10:02:11 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri 127 tts 0:00 killtime 23:58:29): CMD START /usr/local/sbin/faxsend -m ttyC01 
sendq/q28427 (PID 5463)

Apr 24 10:02:19 fax-gw FaxSend[5463]: MODEM MULTI-TECH SYSTEMS MT2834ZDXI/0308
Apr 24 10:02:19 fax-gw FaxSend[5463]: SEND FAX: JOB 28427 DEST +44145525xxxx 
COMMID 00000178

Apr 24 10:03:57 fax-gw FaxSend[5463]: Client does not support document page 
width, max remote page width 1728 pixels, image width 1734 pixels

Apr 24 10:04:00 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
127 tts 0:00 killtime 23:56:40): CMD DONE: exit status 0x300


Apr 24 10:04:00 fax-gw FaxQueuer[927]: JOB 28427 (ready dest +44145525xxxx pri 
126 tts 0:00 killtime 23:56:40): SEND INCOMPLETE: retry immediately; Client does
not support document page width, max remote page width 1728 pixels, image width
1734 pixels

Apr 24 10:04:00 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
126 tts 0:00 killtime 23:56:40): PREPARE START
Apr 24 10:04:00 fax-gw FaxQueuer[5574]: JOB 28427 (active dest +44145525xxxx 
pri 126 tts 0:00 killtime 23:56:40): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28448;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28448.ps

Apr 24 10:04:10 fax-gw FaxQueuer[5574]: JOB 28427 (active dest +44145525xxxx 
pri 126 tts 0:00 killtime 23:56:30): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28449;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28449.ps
Apr 24 10:04:11 fax-gw FaxQueuer[5574]: JOB 28427 (active dest +44145525xxxx 
pri 126 tts 0:00 killtime 23:56:29): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28450.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28450.ps.28427

Apr 24 10:04:13 fax-gw FaxQueuer[5574]: JOB 28427 (active dest +44145525xxxx 
pri 126 tts 0:00 killtime 23:56:27): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28451.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28451.ps.28427
Apr 24 10:04:14 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
126 tts 0:00 killtime 23:56:26): PREPARE DONE
Apr 24 10:04:14 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
126 tts 0:00 killtime 23:56:26): CMD START /usr/local/sbin/faxsend -m ttyC01 
sendq/q28427 (PID 5599)

Apr 24 10:04:22 fax-gw FaxSend[5599]: MODEM MULTI-TECH SYSTEMS MT2834ZDXI/0308
Apr 24 10:04:22 fax-gw FaxSend[5599]: SEND FAX: JOB 28427 DEST +44145525xxxx 
COMMID 00000182

Apr 24 10:06:01 fax-gw FaxSend[5599]: Client does not support document page 
width, max remote page width 1728 pixels, image width 1734 pixels

Apr 24 10:06:03 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
126 tts 0:00 killtime 23:54:37): CMD DONE: exit status 0x300

Apr 24 10:06:03 fax-gw FaxQueuer[927]: JOB 28427 (ready dest +44145525xxxx pri 
125 tts 0:00 killtime 23:54:37): SEND INCOMPLETE: retry immediately; Client does
not support document page width, max remote page width 1728 pixels, image width
1734 pixels

Apr 24 10:06:03 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
125 tts 0:00 killtime 23:54:37): PREPARE START
Apr 24 10:06:03 fax-gw FaxQueuer[5792]: JOB 28427 (active dest +44145525xxxx 
pri 125 tts 0:00 killtime 23:54:37): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28450.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28450.ps.28427

Apr 24 10:06:08 fax-gw FaxQueuer[5792]: JOB 28427 (active dest +44145525xxxx 
pri 125 tts 0:00 killtime 23:54:32): CONVERT DOCUMENT: bin/ps2fax -o 
docq/doc28451.ps;01 -r 196 -w 1728 -l 297 -m 20 -1 docq/doc28451.ps.28427

Apr 24 10:06:10 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
125 tts 0:00 killtime 23:54:30): PREPARE DONE
Apr 24 10:06:10 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
125 tts 0:00 killtime 23:54:30): CMD START /usr/local/sbin/faxsend -m ttyC01 
sendq/q28427 (PID 5807)

Apr 24 10:06:18 fax-gw FaxSend[5807]: SEND FAX: JOB 28427 DEST +44145525xxxx 
COMMID 00000189

Apr 24 10:07:18 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
125 tts 0:00 killtime 23:53:22): CMD DONE: exit status 0

Apr 24 10:07:18 fax-gw FaxQueuer[927]: JOB 28427 (sleeping dest +44145525xxxx 
pri 124 tts 0:00 killtime 23:53:22): SEND INCOMPLETE: requeue for 7:17; No answer(T.30 T1 timeout)
Apr 24 10:07:18 fax-gw FaxQueuer[927]: NOTIFY: /var/tpc/tpcnotify.pl 
"sendq/q28427" "requeued" "" "10:14"

Apr 24 10:14:36 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
124 tts 0:00 killtime 23:46:04): CMD START /usr/local/sbin/faxsend -m ttyC01 
sendq/q28427 (PID 6381)

Apr 24 10:14:41 fax-gw FaxSend[6381]: MODEM MULTI-TECH SYSTEMS MT2834ZDXI/0308
Apr 24 10:14:41 fax-gw FaxSend[6381]: SEND FAX: JOB 28427 DEST +44145525xxxx COMMID 00000204

Apr 24 10:16:08 fax-gw FaxQueuer[927]: Bogus document handed to unrefDoc: 01
Apr 24 10:16:08 fax-gw FaxQueuer[927]: Bogus document handed to unrefDoc: 01


Apr 24 10:16:08 fax-gw FaxSend[6381]: Unable to rename transmitted document docq/doc28448: Invalid argument
Apr 24 10:16:08 fax-gw FaxSend[6381]: Unable to rename transmitted document docq/doc28448: Invalid argument

Apr 24 10:17:05 fax-gw FaxQueuer[927]: Bogus document handed to unrefDoc: 01
Apr 24 10:17:05 fax-gw FaxQueuer[927]: Bogus document handed to unrefDoc: 01
Apr 24 10:17:05 fax-gw FaxSend[6381]: Unable to rename transmitted document docq/doc28449: Invalid argument
Apr 24 10:17:05 fax-gw FaxSend[6381]: Unable to rename transmitted document docq/doc28449: Invalid argument
Apr 24 10:17:05 fax-gw FaxSend[6381]: Client does not support document page width, max remote page width 1728 pixels, image width 1734 pixels

Apr 24 10:17:07 fax-gw FaxQueuer[927]: JOB 28427 (active dest +44145525xxxx pri
124 tts 0:00 killtime 23:43:33): CMD DONE: exit status 0x300
Apr 24 10:17:07 fax-gw FaxQueuer[927]: JOB 28427 (ready dest +44145525xxxx pri 123 tts 0:00 killtime 23:43:33): SEND INCOMPLETE: retry immediately; Client does
not support document page width, max remote page width 1728 pixels, image width 1734 pixels
Apr 24 10:17:07 fax-gw FaxQueuer[927]: sendq/q28427: line 52: Can not access document file "docq/doc28448": No such file or directory
Apr 24 10:17:07 fax-gw FaxQueuer[927]: sendq/q28427: line 52: Can not access document file "docq/doc28448": No such file or directory
Apr 24 10:17:07 fax-gw FaxQueuer[927]: sendq/q28427: line 53: Can not access document file "docq/doc28449": No such file or directory
Apr 24 10:17:07 fax-gw FaxQueuer[927]: sendq/q28427: line 53: Can not access document file "docq/doc28449": No such file or directory
Apr 24 10:17:07 fax-gw FaxQueuer[927]: JOB 28427: Could not read job file
Apr 24 10:17:07 fax-gw FaxQueuer[927]: JOB 28427: Could not read job file



c00000178 says:

Apr 24 10:02:19.80: [ 5463]: SESSION BEGIN 00000178 44145525xxxx
Apr 24 10:02:19.81: [ 5463]: SEND FAX: JOB 28427 DEST +44145525xxxx COMMID 00000178
Apr 24 10:02:19.81: [ 5463]: DELAY 2600 ms
Apr 24 10:02:24.46: [ 5463]: <-- [15:ATE0V1X4S0=0H0\r]
Apr 24 10:02:24.61: [ 5463]: --> [14:ATE0V1X4S0=0H0]
Apr 24 10:02:24.61: [ 5463]: --> [2:OK]
Apr 24 10:02:24.61: [ 5463]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Apr 24 10:02:24.71: [ 5463]: --> [2:OK]
Apr 24 10:02:24.71: [ 5463]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:02:24.81: [ 5463]: --> [2:OK]
Apr 24 10:02:24.81: [ 5463]: <-- [10:AT+FTBC=0\r]
Apr 24 10:02:24.91: [ 5463]: --> [2:OK]
Apr 24 10:02:24.91: [ 5463]: <-- [10:AT+FBOR=0\r]
Apr 24 10:02:25.01: [ 5463]: --> [2:OK]
Apr 24 10:02:25.01: [ 5463]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:02:25.11: [ 5463]: --> [2:OK]
Apr 24 10:02:25.11: [ 5463]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:02:25.21: [ 5463]: --> [2:OK]
Apr 24 10:02:25.21: [ 5463]: <-- [5:ATM0\r]
Apr 24 10:02:25.33: [ 5463]: --> [2:OK]
Apr 24 10:02:25.39: [ 5463]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:02:25.58: [ 5463]: --> [2:OK]
Apr 24 10:02:25.58: [ 5463]: <-- [10:AT+FTBC=0\r]
Apr 24 10:02:25.76: [ 5463]: --> [2:OK]
Apr 24 10:02:25.76: [ 5463]: <-- [10:AT+FBOR=0\r]
Apr 24 10:02:25.94: [ 5463]: --> [2:OK]
Apr 24 10:02:25.94: [ 5463]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:02:26.14: [ 5463]: --> [2:OK]
Apr 24 10:02:26.14: [ 5463]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:02:26.32: [ 5463]: --> [2:OK]
Apr 24 10:02:26.32: [ 5463]: <-- [29:AT+FLID="Demon Internet Ltd"\r]
Apr 24 10:02:26.50: [ 5463]: --> [2:OK]
Apr 24 10:02:26.51: [ 5463]: DIAL 0145525xxxx
Apr 24 10:02:26.51: [ 5463]: <-- [16:ATDT0145525xxxx\r]
Apr 24 10:02:40.90: [ 5463]: --> [5:+FCON]
Apr 24 10:02:43.78: [ 5463]: --> [111:+FNSF:00 00 11 80 00 80 49 10 53 45 41 2D
42 41 4E 44 20 55 4B 20 4C 54 44 20 00 42 00 80 80 C0 2E 01 01 01 01 ]
Apr 24 10:02:43.79: [ 5463]: REMOTE NSF "00 00 11 80 00 80 49 10 53 45 41 2D 42
41 4E 44 20 55 4B 20 4C 54 44 20 00 42 00 80 80 C0 2E 01 01 01 01"
Apr 24 10:02:43.79: [ 5463]: --> [28:+FCSI:"        01455 25xxxx"]
Apr 24 10:02:43.79: [ 5463]: REMOTE CSI "01455 25xxxx"
Apr 24 10:02:43.79: [ 5463]: --> [21:+FDIS:1,3,0,2,1,2,0,2]
Apr 24 10:02:43.90: [ 5463]: --> [2:OK]
Apr 24 10:02:43.90: [ 5463]: REMOTE best rate 9600 bit/s
Apr 24 10:02:43.90: [ 5463]: REMOTE max page width 1728 pixels in 215 mm
Apr 24 10:02:43.90: [ 5463]: REMOTE max unlimited page length
Apr 24 10:02:43.90: [ 5463]: REMOTE best vres 7.7 line/mm
Apr 24 10:02:43.90: [ 5463]: REMOTE best format 2-D MR
Apr 24 10:02:43.90: [ 5463]: REMOTE supports T.30 Annex C, half duplex ECM
Apr 24 10:02:43.90: [ 5463]: REMOTE best 10 ms, 5 ms/scanline
Apr 24 10:02:43.90: [ 5463]: USE 9600 bit/s
Apr 24 10:02:43.90: [ 5463]: USE 10 ms, 5 ms/scanline
Apr 24 10:02:43.90: [ 5463]: SEND file "docq/doc28448.ps;01"
Apr 24 10:02:43.91: [ 5463]: USE page width 1728 pixels in 215 mm
Apr 24 10:02:43.91: [ 5463]: USE unlimited page length
Apr 24 10:02:43.91: [ 5463]: USE 7.7 line/mm
Apr 24 10:02:43.91: [ 5463]: USE 1-D MR
Apr 24 10:02:43.91: [ 5463]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,2\r]
Apr 24 10:02:44.12: [ 5463]: --> [2:OK]
Apr 24 10:02:44.12: [ 5463]: <-- [7:AT+FDT\r]
Apr 24 10:02:49.90: [ 5463]: --> [21:+FDCS:1,3,0,2,0,0,0,1]
Apr 24 10:02:49.90: [ 5463]: --> [7:CONNECT]
Apr 24 10:02:49.90: [ 5463]: SEND wait for XON
Apr 24 10:02:49.90: [ 5463]: --> [1:^Q]
Apr 24 10:02:49.90: [ 5463]: SEND begin page
Apr 24 10:02:49.91: [ 5463]: <-- data [1029]
Apr 24 10:02:49.91: [ 5463]: <-- data [1027]
Apr 24 10:02:49.91: [ 5463]: <-- data [1025]
Apr 24 10:02:49.93: [ 5463]: <-- data [1029]
Apr 24 10:02:50.27: [ 5463]: <-- data [1027]
Apr 24 10:02:50.47: [ 5463]: <-- data [1030]
Apr 24 10:02:50.77: [ 5463]: <-- data [1029]
Apr 24 10:02:52.81: [ 5463]: <-- data [1031]
Apr 24 10:02:54.09: [ 5463]: <-- data [1029]
Apr 24 10:02:55.31: [ 5463]: <-- data [1032]
Apr 24 10:02:57.31: [ 5463]: <-- data [1035]
Apr 24 10:02:58.37: [ 5463]: <-- data [1037]
Apr 24 10:02:59.83: [ 5463]: <-- data [1032]
Apr 24 10:03:00.93: [ 5463]: <-- data [1033]
Apr 24 10:03:01.73: [ 5463]: <-- data [1033]
Apr 24 10:03:02.93: [ 5463]: <-- data [1029]
Apr 24 10:03:04.55: [ 5463]: <-- data [1028]
Apr 24 10:03:05.33: [ 5463]: <-- data [1024]
Apr 24 10:03:06.26: [ 5463]: <-- data [1025]
Apr 24 10:03:07.13: [ 5463]: <-- data [1026]
Apr 24 10:03:08.17: [ 5463]: <-- data [1026]
Apr 24 10:03:10.01: [ 5463]: <-- data [1031]
Apr 24 10:03:10.97: [ 5463]: <-- data [1035]
Apr 24 10:03:12.15: [ 5463]: <-- data [1027]
Apr 24 10:03:13.67: [ 5463]: <-- data [1033]
Apr 24 10:03:16.62: [ 5463]: <-- data [1028]
Apr 24 10:03:17.57: [ 5463]: <-- data [1026]
Apr 24 10:03:18.28: [ 5463]: <-- data [1031]
Apr 24 10:03:19.60: [ 5463]: <-- data [1026]
Apr 24 10:03:20.40: [ 5463]: <-- data [1027]
Apr 24 10:03:21.14: [ 5463]: <-- data [1026]
Apr 24 10:03:21.94: [ 5463]: <-- data [1029]
Apr 24 10:03:22.74: [ 5463]: <-- data [1024]
Apr 24 10:03:23.48: [ 5463]: <-- data [1028]
Apr 24 10:03:24.84: [ 5463]: <-- data [1026]
Apr 24 10:03:25.68: [ 5463]: <-- data [1029]
Apr 24 10:03:25.88: [ 5463]: <-- data [1025]
Apr 24 10:03:27.30: [ 5463]: <-- data [1028]
Apr 24 10:03:28.14: [ 5463]: <-- data [1028]
Apr 24 10:03:28.84: [ 5463]: <-- data [1028]
Apr 24 10:03:29.74: [ 5463]: <-- data [1025]
Apr 24 10:03:30.56: [ 5463]: <-- data [1025]
Apr 24 10:03:31.26: [ 5463]: <-- data [1026]
Apr 24 10:03:32.58: [ 5463]: <-- data [1027]
Apr 24 10:03:33.40: [ 5463]: <-- data [1028]
Apr 24 10:03:34.10: [ 5463]: <-- data [1025]
Apr 24 10:03:34.94: [ 5463]: <-- data [1025]
Apr 24 10:03:35.76: [ 5463]: <-- data [1028]
Apr 24 10:03:36.42: [ 5463]: <-- data [1024]
Apr 24 10:03:37.24: [ 5463]: <-- data [1026]
Apr 24 10:03:38.58: [ 5463]: <-- data [758]
Apr 24 10:03:39.32: [ 5463]: SENT 51955 bytes of data
Apr 24 10:03:39.32: [ 5463]: <-- data [2]
Apr 24 10:03:40.12: [ 5463]: SEND end page
Apr 24 10:03:43.08: [ 5463]: --> [112:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q]
Apr 24 10:03:43.08: [ 5463]: --> [2:OK]
Apr 24 10:03:43.08: [ 5463]: SEND send MPS (more pages, same document)
Apr 24 10:03:43.08: [ 5463]: <-- [9:AT+FET=0\r]
Apr 24 10:03:47.82: [ 5463]: --> [7:+FPTS:1]
Apr 24 10:03:47.82: [ 5463]: --> [2:OK]
Apr 24 10:03:47.82: [ 5463]: SEND recv MCF (message confirmation)
Apr 24 10:03:47.85: [ 5463]: SEND FAX (00000178): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (page 1 of 4 sent in 1:04)
Apr 24 10:03:47.85: [ 5463]: SEND FAX (00000178): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (docq/doc28448.ps;01 sent in 1:04)
Apr 24 10:03:47.96: [ 5463]: SEND file "docq/doc28449.ps;01"
Apr 24 10:03:47.96: [ 5463]: USE page width 1728 pixels in 215 mm
Apr 24 10:03:47.96: [ 5463]: USE unlimited page length
Apr 24 10:03:47.96: [ 5463]: USE 7.7 line/mm
Apr 24 10:03:47.96: [ 5463]: USE 1-D MR
Apr 24 10:03:47.96: [ 5463]: <-- [7:AT+FDT\r]
Apr 24 10:03:48.22: [ 5463]: --> [7:CONNECT]
Apr 24 10:03:48.22: [ 5463]: SEND wait for XON
Apr 24 10:03:48.22: [ 5463]: --> [1:^Q]
Apr 24 10:03:48.22: [ 5463]: SEND begin page
Apr 24 10:03:48.23: [ 5463]: <-- data [1027]
Apr 24 10:03:48.23: [ 5463]: <-- data [1025]
Apr 24 10:03:48.23: [ 5463]: <-- data [1028]
Apr 24 10:03:48.25: [ 5463]: <-- data [673]
Apr 24 10:03:48.59: [ 5463]: SENT 3740 bytes of data
Apr 24 10:03:48.59: [ 5463]: <-- data [2]
Apr 24 10:03:48.79: [ 5463]: SEND end page
Apr 24 10:03:52.26: [ 5463]: --> [2:OK]
Apr 24 10:03:52.26: [ 5463]: SEND send MPS (more pages, same document)
Apr 24 10:03:52.26: [ 5463]: <-- [9:AT+FET=0\r]
Apr 24 10:03:57.80: [ 5463]: --> [7:+FPTS:1]
Apr 24 10:03:57.81: [ 5463]: --> [2:OK]
Apr 24 10:03:57.81: [ 5463]: SEND recv MCF (message confirmation)
Apr 24 10:03:57.83: [ 5463]: SEND FAX (00000178): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (page 2 of 4 sent in 0:10)
Apr 24 10:03:57.83: [ 5463]: SEND FAX (00000178): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (docq/doc28449.ps;01 sent in 0:10)
Apr 24 10:03:57.96: [ 5463]: SEND file "docq/doc28450.ps;01"
Apr 24 10:03:57.97: [ 5463]: Client does not support document page width, max remote page width 1728 pixels, image width 1734 pixels
Apr 24 10:03:57.97: [ 5463]: <-- [5:ATH0\r]
Apr 24 10:03:59.55: [ 5463]: --> [7:+FHNG:2]
Apr 24 10:03:59.55: [ 5463]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (code 2)
Apr 24 10:03:59.75: [ 5463]: --> [0:]
Apr 24 10:03:59.75: [ 5463]: MODEM <Empty line>
Apr 24 10:03:59.83: [ 5463]: SESSION END


And c00000182:
Apr 24 10:04:22.88: [ 5599]: SESSION BEGIN 00000182 44145525xxxx
Apr 24 10:04:22.89: [ 5599]: SEND FAX: JOB 28427 DEST +44145525xxxx COMMID 00000182
Apr 24 10:04:22.89: [ 5599]: DELAY 2600 ms
Apr 24 10:04:27.53: [ 5599]: <-- [15:ATE0V1X4S0=0H0\r]
Apr 24 10:04:27.67: [ 5599]: --> [14:ATE0V1X4S0=0H0]
Apr 24 10:04:27.67: [ 5599]: --> [2:OK]
Apr 24 10:04:27.67: [ 5599]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Apr 24 10:04:27.77: [ 5599]: --> [2:OK]
Apr 24 10:04:27.77: [ 5599]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:04:27.87: [ 5599]: --> [2:OK]
Apr 24 10:04:27.87: [ 5599]: <-- [10:AT+FTBC=0\r]
Apr 24 10:04:27.97: [ 5599]: --> [2:OK]
Apr 24 10:04:27.97: [ 5599]: <-- [10:AT+FBOR=0\r]
Apr 24 10:04:28.07: [ 5599]: --> [2:OK]
Apr 24 10:04:28.07: [ 5599]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:04:28.17: [ 5599]: --> [2:OK]
Apr 24 10:04:28.17: [ 5599]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:04:28.27: [ 5599]: --> [2:OK]
Apr 24 10:04:28.27: [ 5599]: <-- [5:ATM0\r]
Apr 24 10:04:28.37: [ 5599]: --> [2:OK]
Apr 24 10:04:28.41: [ 5599]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:04:28.58: [ 5599]: --> [2:OK]
Apr 24 10:04:28.58: [ 5599]: <-- [10:AT+FTBC=0\r]
Apr 24 10:04:28.76: [ 5599]: --> [2:OK]
Apr 24 10:04:28.76: [ 5599]: <-- [10:AT+FBOR=0\r]
Apr 24 10:04:28.94: [ 5599]: --> [2:OK]
Apr 24 10:04:28.94: [ 5599]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:04:29.12: [ 5599]: --> [2:OK]
Apr 24 10:04:29.12: [ 5599]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:04:29.30: [ 5599]: --> [2:OK]
Apr 24 10:04:29.30: [ 5599]: <-- [29:AT+FLID="Demon Internet Ltd"\r]
Apr 24 10:04:29.48: [ 5599]: --> [2:OK]
Apr 24 10:04:29.49: [ 5599]: DIAL 0145525xxxx
Apr 24 10:04:29.49: [ 5599]: <-- [16:ATDT0145525xxxx\r]
Apr 24 10:04:44.10: [ 5599]: --> [5:+FCON]
Apr 24 10:04:46.99: [ 5599]: --> [111:+FNSF:00 00 11 80 00 80 49 10 53 45 41 2D
42 41 4E 44 20 55 4B 20 4C 54 44 20 00 42 00 80 80 C0 2E 01 01 01 01 ]
Apr 24 10:04:46.99: [ 5599]: REMOTE NSF "00 00 11 80 00 80 49 10 53 45 41 2D 42
41 4E 44 20 55 4B 20 4C 54 44 20 00 42 00 80 80 C0 2E 01 01 01 01"
Apr 24 10:04:46.99: [ 5599]: --> [28:+FCSI:"        01455 25xxxx"]
Apr 24 10:04:46.99: [ 5599]: REMOTE CSI "01455 25xxxx"
Apr 24 10:04:46.99: [ 5599]: --> [21:+FDIS:1,3,0,2,1,2,0,2]
Apr 24 10:04:47.10: [ 5599]: --> [2:OK]
Apr 24 10:04:47.10: [ 5599]: REMOTE best rate 9600 bit/s
Apr 24 10:04:47.10: [ 5599]: REMOTE max page width 1728 pixels in 215 mm
Apr 24 10:04:47.10: [ 5599]: REMOTE max unlimited page length
Apr 24 10:04:47.10: [ 5599]: REMOTE best vres 7.7 line/mm
Apr 24 10:04:47.10: [ 5599]: REMOTE best format 2-D MR
Apr 24 10:04:47.10: [ 5599]: REMOTE supports T.30 Annex C, half duplex ECM
Apr 24 10:04:47.10: [ 5599]: REMOTE best 10 ms, 5 ms/scanline
Apr 24 10:04:47.10: [ 5599]: USE 9600 bit/s
Apr 24 10:04:47.10: [ 5599]: USE 10 ms, 5 ms/scanline
Apr 24 10:04:47.10: [ 5599]: SEND file "docq/doc28448;01"
Apr 24 10:04:47.11: [ 5599]: USE page width 1728 pixels in 215 mm
Apr 24 10:04:47.11: [ 5599]: USE unlimited page length
Apr 24 10:04:47.11: [ 5599]: USE 7.7 line/mm
Apr 24 10:04:47.11: [ 5599]: USE 1-D MR
Apr 24 10:04:47.11: [ 5599]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,2\r]
Apr 24 10:04:47.30: [ 5599]: --> [2:OK]
Apr 24 10:04:47.30: [ 5599]: <-- [7:AT+FDT\r]
Apr 24 10:04:53.06: [ 5599]: --> [21:+FDCS:1,3,0,2,0,0,0,1]
Apr 24 10:04:53.06: [ 5599]: --> [7:CONNECT]
Apr 24 10:04:53.06: [ 5599]: SEND wait for XON
Apr 24 10:04:53.06: [ 5599]: --> [1:^Q]
Apr 24 10:04:53.06: [ 5599]: SEND begin page
Apr 24 10:04:53.07: [ 5599]: <-- data [1027]
Apr 24 10:04:53.07: [ 5599]: <-- data [1026]
Apr 24 10:04:53.08: [ 5599]: <-- data [1026]
Apr 24 10:04:53.09: [ 5599]: <-- data [1029]
Apr 24 10:04:53.43: [ 5599]: <-- data [1027]
Apr 24 10:04:53.63: [ 5599]: <-- data [1030]
Apr 24 10:04:53.93: [ 5599]: <-- data [1029]
Apr 24 10:04:55.97: [ 5599]: <-- data [1031]
Apr 24 10:04:57.25: [ 5599]: <-- data [1029]
Apr 24 10:04:58.49: [ 5599]: <-- data [1031]
Apr 24 10:05:00.49: [ 5599]: <-- data [1036]
Apr 24 10:05:01.55: [ 5599]: <-- data [1037]
Apr 24 10:05:03.01: [ 5599]: <-- data [1032]
Apr 24 10:05:04.11: [ 5599]: <-- data [1033]
Apr 24 10:05:04.91: [ 5599]: <-- data [1033]
Apr 24 10:05:06.60: [ 5599]: <-- data [1029]
Apr 24 10:05:07.74: [ 5599]: <-- data [1028]
Apr 24 10:05:08.51: [ 5599]: <-- data [1024]
Apr 24 10:05:09.42: [ 5599]: <-- data [1025]
Apr 24 10:05:10.30: [ 5599]: <-- data [1026]
Apr 24 10:05:11.36: [ 5599]: <-- data [1026]
Apr 24 10:05:13.20: [ 5599]: <-- data [1031]
Apr 24 10:05:14.14: [ 5599]: <-- data [1035]
Apr 24 10:05:15.32: [ 5599]: <-- data [1027]
Apr 24 10:05:16.86: [ 5599]: <-- data [1033]
Apr 24 10:05:19.78: [ 5599]: <-- data [1028]
Apr 24 10:05:20.72: [ 5599]: <-- data [1026]
Apr 24 10:05:21.44: [ 5599]: <-- data [1031]
Apr 24 10:05:22.76: [ 5599]: <-- data [1026]
Apr 24 10:05:23.56: [ 5599]: <-- data [1027]
Apr 24 10:05:24.30: [ 5599]: <-- data [1026]
Apr 24 10:05:25.13: [ 5599]: <-- data [1028]
Apr 24 10:05:25.90: [ 5599]: <-- data [1025]
Apr 24 10:05:26.64: [ 5599]: <-- data [1027]
Apr 24 10:05:28.00: [ 5599]: <-- data [1027]
Apr 24 10:05:28.84: [ 5599]: <-- data [1029]
Apr 24 10:05:29.04: [ 5599]: <-- data [1025]
Apr 24 10:05:30.46: [ 5599]: <-- data [1028]
Apr 24 10:05:31.30: [ 5599]: <-- data [1028]
Apr 24 10:05:32.00: [ 5599]: <-- data [1028]
Apr 24 10:05:32.88: [ 5599]: <-- data [1025]
Apr 24 10:05:33.70: [ 5599]: <-- data [1025]
Apr 24 10:05:34.40: [ 5599]: <-- data [1026]
Apr 24 10:05:35.73: [ 5599]: <-- data [1027]
Apr 24 10:05:36.57: [ 5599]: <-- data [1028]
Apr 24 10:05:37.27: [ 5599]: <-- data [1025]
Apr 24 10:05:38.11: [ 5599]: <-- data [1025]
Apr 24 10:05:38.93: [ 5599]: <-- data [1028]
Apr 24 10:05:39.59: [ 5599]: <-- data [1024]
Apr 24 10:05:40.41: [ 5599]: <-- data [1026]
Apr 24 10:05:41.78: [ 5599]: <-- data [763]
Apr 24 10:05:42.49: [ 5599]: SENT 51960 bytes of data
Apr 24 10:05:42.49: [ 5599]: <-- data [2]
Apr 24 10:05:43.29: [ 5599]: SEND end page
Apr 24 10:05:46.24: [ 5599]: --> [112:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q]
Apr 24 10:05:46.24: [ 5599]: --> [2:OK]
Apr 24 10:05:46.24: [ 5599]: SEND send MPS (more pages, same document)
Apr 24 10:05:46.24: [ 5599]: <-- [9:AT+FET=0\r]
Apr 24 10:05:50.98: [ 5599]: --> [7:+FPTS:1]
Apr 24 10:05:50.98: [ 5599]: --> [2:OK]
Apr 24 10:05:50.98: [ 5599]: SEND recv MCF (message confirmation)
Apr 24 10:05:51.06: [ 5599]: SEND FAX (00000182): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (page 3 of 6 sent in 1:03)
Apr 24 10:05:51.07: [ 5599]: SEND FAX (00000182): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (docq/doc28448;01 sent in 1:04)
Apr 24 10:05:51.44: [ 5599]: SEND file "docq/doc28449;01"
Apr 24 10:05:51.44: [ 5599]: USE page width 1728 pixels in 215 mm
Apr 24 10:05:51.44: [ 5599]: USE unlimited page length
Apr 24 10:05:51.44: [ 5599]: USE 7.7 line/mm
Apr 24 10:05:51.44: [ 5599]: USE 1-D MR
Apr 24 10:05:51.44: [ 5599]: <-- [7:AT+FDT\r]
Apr 24 10:05:51.70: [ 5599]: --> [7:CONNECT]
Apr 24 10:05:51.70: [ 5599]: SEND wait for XON
Apr 24 10:05:51.70: [ 5599]: --> [1:^Q]
Apr 24 10:05:51.70: [ 5599]: SEND begin page
Apr 24 10:05:51.71: [ 5599]: <-- data [1027]
Apr 24 10:05:51.71: [ 5599]: <-- data [1025]
Apr 24 10:05:51.71: [ 5599]: <-- data [1028]
Apr 24 10:05:51.73: [ 5599]: <-- data [679]
Apr 24 10:05:52.07: [ 5599]: SENT 3746 bytes of data
Apr 24 10:05:52.07: [ 5599]: <-- data [2]
Apr 24 10:05:52.27: [ 5599]: SEND end page
Apr 24 10:05:55.74: [ 5599]: --> [2:OK]
Apr 24 10:05:55.74: [ 5599]: SEND send MPS (more pages, same document)
Apr 24 10:05:55.74: [ 5599]: <-- [9:AT+FET=0\r]
Apr 24 10:06:01.27: [ 5599]: --> [7:+FPTS:1]
Apr 24 10:06:01.27: [ 5599]: --> [2:OK]
Apr 24 10:06:01.27: [ 5599]: SEND recv MCF (message confirmation)
Apr 24 10:06:01.28: [ 5599]: SEND FAX (00000182): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (page 4 of 6 sent in 0:10)
Apr 24 10:06:01.29: [ 5599]: SEND FAX (00000182): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (docq/doc28449;01 sent in 0:10)
Apr 24 10:06:01.44: [ 5599]: SEND file "docq/doc28450.ps;01"
Apr 24 10:06:01.44: [ 5599]: Client does not support document page width, max re
mote page width 1728 pixels, image width 1734 pixels
Apr 24 10:06:01.44: [ 5599]: <-- [5:ATH0\r]
Apr 24 10:06:03.00: [ 5599]: --> [7:+FHNG:2]
Apr 24 10:06:03.00: [ 5599]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (code 2)
Apr 24 10:06:03.21: [ 5599]: --> [0:]
Apr 24 10:06:03.21: [ 5599]: MODEM <Empty line>
Apr 24 10:06:03.34: [ 5599]: SESSION END

and c00000189:

Apr 24 10:06:18.14: [ 5807]: SESSION BEGIN 00000189 44145525xxxx
Apr 24 10:06:18.15: [ 5807]: SEND FAX: JOB 28427 DEST +44145525xxxx COMMID 00000189
Apr 24 10:06:18.15: [ 5807]: DELAY 2600 ms
Apr 24 10:06:22.88: [ 5807]: <-- [15:ATE0V1X4S0=0H0\r]
Apr 24 10:06:22.99: [ 5807]: --> [14:ATE0V1X4S0=0H0]
Apr 24 10:06:22.99: [ 5807]: --> [2:OK]
Apr 24 10:06:22.99: [ 5807]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Apr 24 10:06:23.11: [ 5807]: --> [2:OK]
Apr 24 10:06:23.11: [ 5807]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:06:23.23: [ 5807]: --> [2:OK]
Apr 24 10:06:23.23: [ 5807]: <-- [10:AT+FTBC=0\r]
Apr 24 10:06:23.35: [ 5807]: --> [2:OK]
Apr 24 10:06:23.35: [ 5807]: <-- [10:AT+FBOR=0\r]
Apr 24 10:06:23.47: [ 5807]: --> [2:OK]
Apr 24 10:06:23.47: [ 5807]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:06:23.59: [ 5807]: --> [2:OK]
Apr 24 10:06:23.59: [ 5807]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:06:23.71: [ 5807]: --> [2:OK]
Apr 24 10:06:23.71: [ 5807]: <-- [5:ATM0\r]
Apr 24 10:06:23.81: [ 5807]: --> [2:OK]
Apr 24 10:06:23.83: [ 5807]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:06:24.04: [ 5807]: --> [2:OK]
Apr 24 10:06:24.04: [ 5807]: <-- [10:AT+FTBC=0\r]
Apr 24 10:06:24.22: [ 5807]: --> [2:OK]
Apr 24 10:06:24.22: [ 5807]: <-- [10:AT+FBOR=0\r]
Apr 24 10:06:24.40: [ 5807]: --> [2:OK]
Apr 24 10:06:24.40: [ 5807]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:06:24.58: [ 5807]: --> [2:OK]
Apr 24 10:06:24.58: [ 5807]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:06:24.76: [ 5807]: --> [2:OK]
Apr 24 10:06:24.76: [ 5807]: <-- [29:AT+FLID="Demon Internet Ltd"\r]
Apr 24 10:06:24.94: [ 5807]: --> [2:OK]
Apr 24 10:06:24.95: [ 5807]: DIAL 0145525xxxx
Apr 24 10:06:24.95: [ 5807]: <-- [16:ATDT0145525xxxx\r]
Apr 24 10:07:15.54: [ 5807]: --> [8:+FHNG:11]
Apr 24 10:07:15.54: [ 5807]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
Apr 24 10:07:15.56: [ 5807]: SEND FAILED: No answer (T.30 T1 timeout)
Apr 24 10:07:15.56: [ 5807]: <-- [5:ATH0\r]
Apr 24 10:07:16.05: [ 5807]: --> [2:OK]
Apr 24 10:07:16.15: [ 5807]: SESSION END



And c00000204:

Apr 24 10:14:41.96: [ 6381]: SESSION BEGIN 00000204 44145525xxxx
Apr 24 10:14:41.96: [ 6381]: SEND FAX: JOB 28427 DEST +44145525xxxx COMMID 00000204
Apr 24 10:14:41.96: [ 6381]: DELAY 2600 ms
Apr 24 10:14:46.62: [ 6381]: <-- [15:ATE0V1X4S0=0H0\r]
Apr 24 10:14:46.80: [ 6381]: --> [14:ATE0V1X4S0=0H0]
Apr 24 10:14:46.80: [ 6381]: --> [2:OK]
Apr 24 10:14:46.80: [ 6381]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Apr 24 10:14:46.90: [ 6381]: --> [2:OK]
Apr 24 10:14:46.90: [ 6381]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:14:47.00: [ 6381]: --> [2:OK]
Apr 24 10:14:47.00: [ 6381]: <-- [10:AT+FTBC=0\r]
Apr 24 10:14:47.10: [ 6381]: --> [2:OK]
Apr 24 10:14:47.10: [ 6381]: <-- [10:AT+FBOR=0\r]
Apr 24 10:14:47.20: [ 6381]: --> [2:OK]
Apr 24 10:14:47.20: [ 6381]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:14:47.30: [ 6381]: --> [2:OK]
Apr 24 10:14:47.30: [ 6381]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:14:47.40: [ 6381]: --> [2:OK]
Apr 24 10:14:47.40: [ 6381]: <-- [5:ATM0\r]
Apr 24 10:14:47.50: [ 6381]: --> [2:OK]
Apr 24 10:14:47.53: [ 6381]: <-- [12:AT+FCLASS=2\r]
Apr 24 10:14:47.71: [ 6381]: --> [2:OK]
Apr 24 10:14:47.71: [ 6381]: <-- [10:AT+FTBC=0\r]
Apr 24 10:14:47.89: [ 6381]: --> [2:OK]
Apr 24 10:14:47.89: [ 6381]: <-- [10:AT+FBOR=0\r]
Apr 24 10:14:48.07: [ 6381]: --> [2:OK]
Apr 24 10:14:48.07: [ 6381]: <-- [13:AT+FPHCTO=60\r]
Apr 24 10:14:48.25: [ 6381]: --> [2:OK]
Apr 24 10:14:48.25: [ 6381]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Apr 24 10:14:48.43: [ 6381]: --> [2:OK]
Apr 24 10:14:48.43: [ 6381]: <-- [29:AT+FLID="Demon Internet Ltd"\r]
Apr 24 10:14:48.61: [ 6381]: --> [2:OK]
Apr 24 10:14:48.62: [ 6381]: DIAL 0145525xxxx
Apr 24 10:14:48.62: [ 6381]: <-- [16:ATDT0145525xxxx\r]
Apr 24 10:15:03.07: [ 6381]: --> [5:+FCON]
Apr 24 10:15:05.93: [ 6381]: --> [111:+FNSF:00 00 11 80 00 80 49 10 53 45 41 2D
42 41 4E 44 20 55 4B 20 4C 54 44 20 00 42 00 80 80 C0 2E 01 01 01 01 ]
Apr 24 10:15:05.93: [ 6381]: REMOTE NSF "00 00 11 80 00 80 49 10 53 45 41 2D 42
41 4E 44 20 55 4B 20 4C 54 44 20 00 42 00 80 80 C0 2E 01 01 01 01"
Apr 24 10:15:06.07: [ 6381]: --> [28:+FCSI:"        01455 25xxxx"]
Apr 24 10:15:06.07: [ 6381]: REMOTE CSI "01455 25xxxx"
Apr 24 10:15:06.07: [ 6381]: --> [21:+FDIS:1,3,0,2,1,2,0,2]
Apr 24 10:15:06.07: [ 6381]: --> [2:OK]
Apr 24 10:15:06.07: [ 6381]: REMOTE best rate 9600 bit/s
Apr 24 10:15:06.07: [ 6381]: REMOTE max page width 1728 pixels in 215 mm
Apr 24 10:15:06.07: [ 6381]: REMOTE max unlimited page length
Apr 24 10:15:06.07: [ 6381]: REMOTE best vres 7.7 line/mm
Apr 24 10:15:06.07: [ 6381]: REMOTE best format 2-D MR
Apr 24 10:15:06.07: [ 6381]: REMOTE supports T.30 Annex C, half duplex ECM
Apr 24 10:15:06.07: [ 6381]: REMOTE best 10 ms, 5 ms/scanline
Apr 24 10:15:06.07: [ 6381]: USE 9600 bit/s
Apr 24 10:15:06.07: [ 6381]: USE 10 ms, 5 ms/scanline
Apr 24 10:15:06.07: [ 6381]: SEND file "01"
Apr 24 10:15:06.07: [ 6381]: USE page width 1728 pixels in 215 mm
Apr 24 10:15:06.07: [ 6381]: USE unlimited page length
Apr 24 10:15:06.07: [ 6381]: USE 7.7 line/mm
Apr 24 10:15:06.07: [ 6381]: USE 1-D MR
Apr 24 10:15:06.07: [ 6381]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,2\r]
Apr 24 10:15:06.27: [ 6381]: --> [2:OK]
Apr 24 10:15:06.27: [ 6381]: <-- [7:AT+FDT\r]
Apr 24 10:15:12.13: [ 6381]: --> [21:+FDCS:1,3,0,2,0,0,0,1]
Apr 24 10:15:12.13: [ 6381]: --> [7:CONNECT]
Apr 24 10:15:12.13: [ 6381]: SEND wait for XON
Apr 24 10:15:12.13: [ 6381]: --> [1:^Q]
Apr 24 10:15:12.13: [ 6381]: SEND begin page
Apr 24 10:15:12.14: [ 6381]: <-- data [1024]
Apr 24 10:15:12.14: [ 6381]: <-- data [1028]
Apr 24 10:15:12.14: [ 6381]: <-- data [1025]
Apr 24 10:15:12.15: [ 6381]: <-- data [1029]
Apr 24 10:15:12.51: [ 6381]: <-- data [1029]
Apr 24 10:15:12.71: [ 6381]: <-- data [1027]
Apr 24 10:15:13.01: [ 6381]: <-- data [1029]
Apr 24 10:15:15.03: [ 6381]: <-- data [1032]
Apr 24 10:15:16.31: [ 6381]: <-- data [1031]
Apr 24 10:15:17.55: [ 6381]: <-- data [1037]
Apr 24 10:15:19.57: [ 6381]: <-- data [1035]
Apr 24 10:15:19.77: [ 6381]: <-- data [1029]
Apr 24 10:15:22.17: [ 6381]: <-- data [1039]
Apr 24 10:15:23.31: [ 6381]: <-- data [1035]
Apr 24 10:15:24.37: [ 6381]: <-- data [1027]
Apr 24 10:15:25.17: [ 6381]: <-- data [1024]
Apr 24 10:15:26.99: [ 6381]: <-- data [1024]
Apr 24 10:15:27.69: [ 6381]: <-- data [1027]
Apr 24 10:15:28.45: [ 6381]: <-- data [1026]
Apr 24 10:15:29.72: [ 6381]: <-- data [1030]
Apr 24 10:15:30.58: [ 6381]: <-- data [1034]
Apr 24 10:15:32.76: [ 6381]: <-- data [1029]
Apr 24 10:15:34.38: [ 6381]: <-- data [1029]
Apr 24 10:15:37.10: [ 6381]: <-- data [1032]
Apr 24 10:15:38.24: [ 6381]: <-- data [1026]
Apr 24 10:15:39.06: [ 6381]: <-- data [1031]
Apr 24 10:15:40.38: [ 6381]: <-- data [1025]
Apr 24 10:15:40.58: [ 6381]: <-- data [1027]
Apr 24 10:15:41.92: [ 6381]: <-- data [1027]
Apr 24 10:15:42.72: [ 6381]: <-- data [1025]
Apr 24 10:15:43.42: [ 6381]: <-- data [1028]
Apr 24 10:15:44.24: [ 6381]: <-- data [1026]
Apr 24 10:15:45.62: [ 6381]: <-- data [1027]
Apr 24 10:15:45.82: [ 6381]: <-- data [1028]
Apr 24 10:15:47.18: [ 6381]: <-- data [1027]
Apr 24 10:15:48.06: [ 6381]: <-- data [1027]
Apr 24 10:15:48.80: [ 6381]: <-- data [1028]
Apr 24 10:15:49.56: [ 6381]: <-- data [1028]
Apr 24 10:15:50.44: [ 6381]: <-- data [1026]
Apr 24 10:15:51.18: [ 6381]: <-- data [1025]
Apr 24 10:15:51.96: [ 6381]: <-- data [1024]
Apr 24 10:15:53.38: [ 6381]: <-- data [1029]
Apr 24 10:15:53.58: [ 6381]: <-- data [1026]
Apr 24 10:15:54.96: [ 6381]: <-- data [1027]
Apr 24 10:15:55.78: [ 6381]: <-- data [1025]
Apr 24 10:15:56.50: [ 6381]: <-- data [1028]
Apr 24 10:15:57.29: [ 6381]: <-- data [1024]
Apr 24 10:15:58.09: [ 6381]: <-- data [1026]
Apr 24 10:15:58.85: [ 6381]: <-- data [973]
Apr 24 10:16:00.19: [ 6381]: SENT 50122 bytes of data
Apr 24 10:16:00.19: [ 6381]: <-- data [2]
Apr 24 10:16:00.99: [ 6381]: SEND end page
Apr 24 10:16:03.95: [ 6381]: --> [108:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q]
Apr 24 10:16:03.95: [ 6381]: --> [2:OK]
Apr 24 10:16:03.95: [ 6381]: SEND send MPS (more pages, same document)
Apr 24 10:16:03.95: [ 6381]: <-- [9:AT+FET=0\r]
Apr 24 10:16:08.65: [ 6381]: --> [7:+FPTS:1]
Apr 24 10:16:08.65: [ 6381]: --> [2:OK]
Apr 24 10:16:08.65: [ 6381]: SEND recv MCF (message confirmation)
Apr 24 10:16:08.73: [ 6381]: SEND FAX (00000204): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (page 5 of 8 sent in 1:02)
Apr 24 10:16:08.73: [ 6381]: SEND FAX (00000204): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (01 sent in 1:02)
Apr 24 10:16:08.94: [ 6381]: SEND file "01"
Apr 24 10:16:08.94: [ 6381]: USE page width 1728 pixels in 215 mm
Apr 24 10:16:08.94: [ 6381]: USE unlimited page length
Apr 24 10:16:08.94: [ 6381]: USE 7.7 line/mm
Apr 24 10:16:08.94: [ 6381]: USE 1-D MR
Apr 24 10:16:08.94: [ 6381]: <-- [7:AT+FDT\r]
Apr 24 10:16:09.21: [ 6381]: --> [7:CONNECT]
Apr 24 10:16:09.21: [ 6381]: SEND wait for XON
Apr 24 10:16:09.21: [ 6381]: --> [1:^Q]
Apr 24 10:16:09.21: [ 6381]: SEND begin page
Apr 24 10:16:09.22: [ 6381]: <-- data [1026]
Apr 24 10:16:09.22: [ 6381]: <-- data [1027]
Apr 24 10:16:09.22: [ 6381]: <-- data [1025]
Apr 24 10:16:09.23: [ 6381]: <-- data [1029]
Apr 24 10:16:09.57: [ 6381]: <-- data [1029]
Apr 24 10:16:09.77: [ 6381]: <-- data [1027]
Apr 24 10:16:10.07: [ 6381]: <-- data [1029]
Apr 24 10:16:12.07: [ 6381]: <-- data [1032]
Apr 24 10:16:13.37: [ 6381]: <-- data [1031]
Apr 24 10:16:14.60: [ 6381]: <-- data [1037]
Apr 24 10:16:16.61: [ 6381]: <-- data [1035]
Apr 24 10:16:16.81: [ 6381]: <-- data [1029]
Apr 24 10:16:19.19: [ 6381]: <-- data [1039]
Apr 24 10:16:20.33: [ 6381]: <-- data [1035]
Apr 24 10:16:21.39: [ 6381]: <-- data [1027]
Apr 24 10:16:22.20: [ 6381]: <-- data [1024]
Apr 24 10:16:24.02: [ 6381]: <-- data [1024]
Apr 24 10:16:24.80: [ 6381]: <-- data [1027]
Apr 24 10:16:25.56: [ 6381]: <-- data [1026]
Apr 24 10:16:26.84: [ 6381]: <-- data [1030]
Apr 24 10:16:27.68: [ 6381]: <-- data [1034]
Apr 24 10:16:30.02: [ 6381]: <-- data [1029]
Apr 24 10:16:31.54: [ 6381]: <-- data [1029]
Apr 24 10:16:33.09: [ 6381]: <-- data [1032]
Apr 24 10:16:35.31: [ 6381]: <-- data [1026]
Apr 24 10:16:36.13: [ 6381]: <-- data [1031]
Apr 24 10:16:37.45: [ 6381]: <-- data [1025]
Apr 24 10:16:37.65: [ 6381]: <-- data [1027]
Apr 24 10:16:38.99: [ 6381]: <-- data [1027]
Apr 24 10:16:39.81: [ 6381]: <-- data [1025]
Apr 24 10:16:40.49: [ 6381]: <-- data [1028]
Apr 24 10:16:41.33: [ 6381]: <-- data [1026]
Apr 24 10:16:42.17: [ 6381]: <-- data [1027]
Apr 24 10:16:42.89: [ 6381]: <-- data [1028]
Apr 24 10:16:43.74: [ 6381]: <-- data [1027]
Apr 24 10:16:45.17: [ 6381]: <-- data [1027]
Apr 24 10:16:45.89: [ 6381]: <-- data [1028]
Apr 24 10:16:46.71: [ 6381]: <-- data [1028]
Apr 24 10:16:47.59: [ 6381]: <-- data [1026]
Apr 24 10:16:48.33: [ 6381]: <-- data [1025]
Apr 24 10:16:49.11: [ 6381]: <-- data [1024]
Apr 24 10:16:50.45: [ 6381]: <-- data [1029]
Apr 24 10:16:50.65: [ 6381]: <-- data [1026]
Apr 24 10:16:51.98: [ 6381]: <-- data [1027]
Apr 24 10:16:52.82: [ 6381]: <-- data [1025]
Apr 24 10:16:53.54: [ 6381]: <-- data [1028]
Apr 24 10:16:54.32: [ 6381]: <-- data [1024]
Apr 24 10:16:55.12: [ 6381]: <-- data [1026]
Apr 24 10:16:55.86: [ 6381]: <-- data [973]
Apr 24 10:16:57.22: [ 6381]: SENT 50122 bytes of data
Apr 24 10:16:57.22: [ 6381]: <-- data [2]
Apr 24 10:16:58.00: [ 6381]: SEND end page
Apr 24 10:17:00.99: [ 6381]: --> [108:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S
^Q^S^Q^S^Q^S^Q]
Apr 24 10:17:00.99: [ 6381]: --> [2:OK]
Apr 24 10:17:01.00: [ 6381]: SEND send MPS (more pages, same document)
Apr 24 10:17:01.00: [ 6381]: <-- [9:AT+FET=0\r]
Apr 24 10:17:05.68: [ 6381]: --> [7:+FPTS:1]
Apr 24 10:17:05.68: [ 6381]: --> [2:OK]
Apr 24 10:17:05.68: [ 6381]: SEND recv MCF (message confirmation)
Apr 24 10:17:05.70: [ 6381]: SEND FAX (00000204): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (page 6 of 8 sent in 0:57)
Apr 24 10:17:05.71: [ 6381]: SEND FAX (00000204): FROM byron@sea-band.demon.co.uk TO +44145525xxxx (01 sent in 0:57)
Apr 24 10:17:05.77: [ 6381]: SEND file "docq/doc28450.ps;01"
Apr 24 10:17:05.77: [ 6381]: Client does not support document page width, max remote page width 1728 pixels, image width 1734 pixels
Apr 24 10:17:05.77: [ 6381]: <-- [5:ATH0\r]
Apr 24 10:17:07.42: [ 6381]: --> [7:+FHNG:2]
Apr 24 10:17:07.42: [ 6381]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (code 2)
Apr 24 10:17:07.62: [ 6381]: --> [0:]
Apr 24 10:17:07.62: [ 6381]: MODEM <Empty line>
Apr 24 10:17:07.70: [ 6381]: SESSION END




I am able to reproduce this problem at will, should anyone be interested in looking into the rather ugly failure/immediate requeueing.  It results in the recipient receiving _SOMEONE ELSE'S_ document . . . so it's rather annoying ;-)

-DPN



Attachment Converted: c:\program files\eudora\attach\Re Modem does not support docu

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 29 Apr 1997 15:36:25 -0400
From: "Sam C. Nicholson !!" <scion@delphi.com>
Organization: Skye Communication Networks, Inc.
To: "Ted S. Garaventa" <tsg@tercesi.cctg.com>
CC: HylaFAX software <flexfax@sgi.com>
Subject: Re: sendpage
Sender: owner-flexfax@celestial.com

Ted asks:
>How much of the hylafax software must I run to get the sendpage part to 
>work?

Pretty much all of it.  faxgetty runs the show as far as the modem is
concerned.  You might consider removing the fax executables, but they
are pretty handy.  I suppose that you might also delete the faxdaemon,
claiming to the install process that it is run out of inetd.  Unless
you are really starved for memory, I don't know what that'll get you.

On my sparc 10, I show the three running HylaFax processes consuming
750 Kbytes of core.  They are faxgetty, faxd, and faxq.  I think that
I have seen all three involved in the paging process, so I am not sure
if anything other than a bit of disk space can be saved.

I got it just for the paging as well, but ended up using it for most
all of my faxes.

As it is a tightly integrated piece of software, I think that you will
have more trouble than the effort will save of computer resources.  As
well, folks on the list will be hard pressed to help if they don't know
what you've done to the S/W.

-sam

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 30 Apr 1997 08:46:42 +1200 (NZST)
From: Jonathan Chen <jonc@pinnacle.co.nz>
To: Marie-Noelle Dauphin <dauphin@idris.fr>
cc: Hylafax Mailing list <flexfax@sgi.com>
Subject: Re: Can't receive fax !!!
Sender: owner-flexfax@celestial.com

On Tue, 29 Apr 1997, Marie-Noelle Dauphin wrote:

> We are using hylafax on AIX 4.1.5 . sending is OK !! but .... :-( 
> 
> after read  faq , mailing-archive , man  etc..... we don't solve our problem!!!!
> 
> we don't receive fax , can someone help us ???
> thank you very much for your response ...
> 
[snip]
> Class2RecvDataTrigger:	""		# character sent to modem to start recv

Try changing the above to "\022". The hardest part about setting up
HylaFAX is that you have to read *ALL* the stuff about config(4).
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Tue, 29 Apr 1997 14:48:08 -0700 (PDT)
From: "Ted S. Garaventa" <tsg@tercesi.cctg.com>
To: HylaFAX software <flexfax@sgi.com>
Subject: tiff-v3.4beta036
Sender: owner-flexfax@celestial.com

I was just told by Cary Leung that I need the tiff-v3.4beta036 to run
HylaFAX on solaris-x86. I downloaded it and as usual it needs to be
compiled to work. Where can I get it in binary form already compiled?
I am not a programmer and all this software is useless if I cannot get a
pre-compiled version of all the software.

Ted

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 30 Apr 1997 09:57:13 +0800
To: "Ted S. Garaventa" <tsg@tercesi.cctg.com>
From: CARY LEUNG <cary@cary.com>
Subject: Re: tiff-v3.4beta036
Cc: flexfax@sgi.com
Sender: owner-flexfax@celestial.com

At 02:48 PM 1997/4/29 -0700, you wrote:
>I was just told by Cary Leung that I need the tiff-v3.4beta036 to run
>HylaFAX on solaris-x86. I downloaded it and as usual it needs to be
>compiled to work. Where can I get it in binary form already compiled?
>I am not a programmer and all this software is useless if I cannot get a
>pre-compiled version of all the software.
>
>Ted
>
>
>
Dear Ted,

If you already get tiff software from sgi.com, You can type the following
command
to setup.

./configure i386-unknown-solaris2.5

make

make install

This can compile and install the software, If you had not get it from
sgi.com, I 
had a compiled version in our ftp server.

ftp.cary.net/pub/unix/fax/tiff-x86-Solaris2.5.tar.gz

Good luck.


Cary Leung
cary@cary.com
(System Administrator)
CARYCOM (H.K.) LTD
TEL: +(852)-2803-5650
FAX: +(852)-2575-0992

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: "Ronald Wiplinger" <ronald@trace.com.tw>
To: "flexfax@sgi.com" <flexfax@sgi.com>
Date: Wed, 30 Apr 97 11:07:59 +0800
Reply-To: "Ronald Wiplinger" <ronald@trace.com.tw>
Subject: xferlog description
Sender: owner-flexfax@celestial.com


Please guide me to the field description of the xferlog

xferlog (sample line):

04/29/97 02:49	SEND	00000078	cua1	59	""	JWSlavin@aol.com	"9088043"	""
	65535	0	1:18	0:00	"No carrier detected"


Is there any script available, that brings the logfile into a better (human) readable form?

BTW, what does the No carrier detected mean? The modem is on, the fax number is correct. Where 
should I look for?

....  for more information use:

*   http://www.trace.com.tw          *   gopher://gopher.trace.com.tw
*   ftp://ftp.trace.com.tw           *   telnet://bbs.trace.com.tw
*   sticky:  Ronald  gate.trace.com.tw  (the very fast way to reach me)
*   for talk, InterCom (picture phone) ronald@gate.trace.com.tw
*   Tel: +886 2 609-0652, Fax: +886 2 600-0132, NET: +886 2 600-2318 



Ronald Wiplinger    [Taipei, 24h online] 

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: sendpage
To: tsg@tercesi.cctg.com (Ted S. Garaventa)
Date: Wed, 30 Apr 1997 07:42:11 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Ted S. Garaventa wrote:
    
    How much of the hylafax software must I run to get the sendpage part to
    work? Even though I am interested in the other capabilities I really don't
    need them.

hfaxd(1M), faxq(1M) and all must be correct installed and setup'ed;

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: tiff-v3.4beta036
To: tsg@tercesi.cctg.com (Ted S. Garaventa)
Date: Wed, 30 Apr 1997 07:47:48 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Ted S. Garaventa wrote:
    
    I was just told by Cary Leung that I need the tiff-v3.4beta036 to run
    HylaFAX on solaris-x86. I downloaded it and as usual it needs to be
    compiled to work. Where can I get it in binary form already compiled?
    I am not a programmer and all this software is useless if I cannot get a
    pre-compiled version of all the software.

There is a little bit hope that the pre-compiled tiff-tools
in my HylaFAX distribution for x86 SVR4.2 will also work
on Solaris x86; you could pull the package from sgi.com, un-tar
it and move the tiff-tools in your PATH if they work.

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: Matthias.Apitz@SOFTCON.de
Subject: Re: xferlog description
To: ronald@trace.com.tw
Date: Wed, 30 Apr 1997 09:30:11 +0200 (MSZ)
Cc: flexfax@sgi.com
>From: guru@sisis.de (Matthias Apitz)
Reply-To: Matthias.Apitz@SOFTCON.de (Matthias Apitz)
X-FAX-cover: faxcover-sisis.ps
Sender: owner-flexfax@celestial.com

Ronald Wiplinger wrote:
    
    Please guide me to the field description of the xferlog

The field description is in detail in the man page of xferlog(4F).
    
    xferlog (sample line):
    
    04/29/97 02:49	SEND	00000078	cua1	59	""	JWSlavin@aol.com	"9088043"	""
    	65535	0	1:18	0:00	"No carrier detected"
    
    
    Is there any script available, that brings the logfile into
    a better (human) readable form?

You may start with the man page xferstats(1M) (or with the script-source
if you don't like the output of xferstats(1M));
    
    BTW, what does the No carrier detected mean? The modem is on,
    the fax number is correct. Where should I look for?

"No carrier detected" means what it says: your modem wasn't able
to establish CARRIER with the remote device. For more information
about the problem you should consult the session log file of
such a call.
    
    ....  for more information use:

For more information about what?

	matthias

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 30 Apr 1997 07:15:33 -0500 (CDT)
From: David Smith <david@bcm.tmc.edu>
To: "Ted S. Garaventa" <tsg@tercesi.cctg.com>
cc: HylaFAX software <flexfax@sgi.com>
Subject: Re: tiff-v3.4beta036
X-FAX-NUMBER: 798-1234
Sender: owner-flexfax@celestial.com

On Tue, 29 Apr 1997, Ted S. Garaventa wrote:

> I was just told by Cary Leung that I need the tiff-v3.4beta036 to run
> HylaFAX on solaris-x86. I downloaded it and as usual it needs to be
> compiled to work. Where can I get it in binary form already compiled?
> I am not a programmer and all this software is useless if I cannot get a
> pre-compiled version of all the software.

You don't have to be a programmer to build most software off the net.  
There is usually a configure or install file that steps you through how 
to build and install it.  You just need a C compiler, I reccomend gcc, 
which is avalible in source and binary forms for most platforms, 
including Solaris x86.

Most free UNIX software is distributed in source form.  There are many
reasons for this.  One is most developers don't have access to every type 
and revision of UNIX and so would only be able to provide software on 
only a few platforms.  Another is that paths and libaries would have to 
be hard coded, so you would have to install where the developer wanted, 
and the binaries would either be much larger or you would have to have 
compatable libaries (and I have seen cases where just a patch level, on 
the same hardware and OS rev level has caused programs to crash).

If you can't at least compile basic programs, and you don't even need to 
know any program language to do that, you won't be able to use much of 
the free software avalible.


-----------------------------------------------------------------------
David A. Smith                          | Baylor College of Medicine
Systems Services                        | Enterprise Services, MEDT1103
(713) 798-4560                          | One Baylor Plaza
Internet:  david@bcm.tmc.edu            | Houston, TX  77030

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 30 Apr 1997 07:38:24 -0500 (CDT)
From: David Smith <david@bcm.tmc.edu>
To: Ronald Wiplinger <ronald@trace.com.tw>
cc: "flexfax@sgi.com" <flexfax@sgi.com>
Subject: Re: xferlog description
X-FAX-NUMBER: 798-1234
Sender: owner-flexfax@celestial.com

On Wed, 30 Apr 1997, Ronald Wiplinger wrote:

> 
> Please guide me to the field description of the xferlog
> 
> xferlog (sample line):
> 
> 04/29/97 02:49	SEND	00000078	cua1	59	""	JWSlavin@aol.com	"9088043"	""
> 	65535	0	1:18	0:00	"No carrier detected"
> 

The man page on xferlog has a description of all the fields.
 
> Is there any script available, that brings the logfile into a better (human) readable form?

I don't know but it shouldn't be very to hack up something.
 
> BTW, what does the No carrier detected mean? The modem is on, the fax number is correct. Where 
> should I look for?

That is the response form the other end, whatever you were trying to call 
didn't answer with a fax signal. 

-----------------------------------------------------------------------
David A. Smith                          | Baylor College of Medicine
Systems Services                        | Enterprise Services, MEDT1103
(713) 798-4560                          | One Baylor Plaza
Internet:  david@bcm.tmc.edu            | Houston, TX  77030

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 30 Apr 1997 16:01:00 -0500
From: Evan Roberts <eroberts@healthcare.com>
To: flexfax@sgi.com
Subject: HylaFAX for HP/UX 10.20
Sender: owner-flexfax@celestial.com


Summary
=======

I've gotten HylaFAX 4.0ALPHA22 built and installed, but can't get it
configured.  faxsetup works, faxaddmodem can't seem to poll the
correct speed. At this point faxaddmodem exits.

Details
========
0) Current Installation:

	HylaFAX Distribution:	HylaFAX v4.0pl1 ALPHA 022
	GhostScript:		Aladdin Ghostscript 4.03 (1996-9-23)
	TIFF			3.4beta ALPHA 036
	uname -s -r -v -m:	HP-UX B.10.20 A 9000/715
	Compiler:		gcc version 2.7.2
	Modem:			USRobotics Courier V.32bis V.34+ Fax 


1) After some debugging of faxaddmodem I've found the commands/results
   are not being echo'ed, so the script never sees the results.

2) I've read the HP man pages for /dev/tty, cu, modem, and others. I
   am still unsure which entry to use:

   >bighost # ll /dev/*0p*
   >crw-rw-r--   1 bin        bin          1 0x000001 Apr 30 11:13 /dev/cua0p0
   >crw-rw-r--   1 bin        bin          1 0x000001 Apr 30 11:13 /dev/cul0p0
   >crw--w--w-   1 bin        bin          1 0x000000 Apr 30 15:23 /dev/tty0p0
   >crw--w----   1 uucp       bin          1 0x000002 Apr 30 11:14 /dev/ttyd0p0

3) I've used cu to talk to the modem, see the following output:

   >bighost # cu -l ttyd0p0
   >Connected
   >ATI7
   >Configuration Profile...
   >
   >Product type           US/Canada External
   >Options                V32bis,Terbo,VFC,V34+
   >Fax Options            Class 1/Class 2.0
   >Clock Freq             20.16Mhz
   >Eprom                  256k
   >Ram                    32k
   >
   >Supervisor date        07/12/95
   >DSP date               07/05/95
   >
   >Supervisor rev         6.2.3
   >DSP rev                1.2.4
   >
   >OK
   >
   >ati4
   >USRobotics Courier V.32bis V.34+ Fax Settings...
   >
   >   B0  C1  E1  F1  M1  Q0  V1  X7
   >   BAUD=9600   PARITY=N  WORDLEN=8
   >   DIAL=PULSE  ON HOOK   TIMER
   >
   >   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K1  &L0  &M4  &N0
   >   &P0  &R2  &S0  &T5  &X0  &Y1  %N6  
   >
   >   S00=000  S01=000  S02=043  S03=013  S04=010  S05=008  S06=002  S07=060  
   >   S08=002  S09=006  S10=007  S11=070  S12=050  S13=000  S14=000  S15=000  
   >   S16=000  S17=000  S18=000  S19=000  S20=000  S21=010  S22=017  S23=019  
   >   S24=150  S25=005  S26=001  S27=000  S28=008  S29=020  S30=000  S31=000  
   >   S32=009  S33=000  S34=000  S35=000  S36=000  S37=000  S38=000  S39=000  
   >   S40=000  S41=000  S42=126  S43=200  S44=015  S45=000  S46=000  S47=000  
   >   S48=000  S49=000  S50=000  S51=000  S52=000  S53=000  S54=064  S55=000  
   >   S56=000  S57=000  
   >
   >   LAST DIALED #:                                       
   >
   >OK

4) I've searched the last year's worth of mail archive, read the trouble
   shooting advice and still I'm floundering. I'd gladly accept pointers
   to doc's or fixes.

	I think the ondelay program is working as designed....

Evan R.
-------------------------------------------------------------------------------
Evan Roberts                               Web:   http://www.healthcare.com
Healthcare Communications Inc              Voice: (972) 851-7075
15301 Dallas Parkway, Suite 950            Fax:   (972) 851-7045
Dallas, Texas 75248-4605                   Email: eroberts@healthcare.com

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
Date: Wed, 30 Apr 1997 16:09:28 -0700
From: "Tad J. Kutcher" <dave@3diinc.com>
Organization: N.C.C.S.
To: flexfax@sgi.com
Subject: flow control Irix 5.3 on R4400
Sender: owner-flexfax@celestial.com

Hey flexfax:

I recently installed hylafax 4.0 on an Indy R4400 running Irix 5.3.

When I attempt  rtscts with /dev/ttyf2 sendafax cannot initialize the
server; faxstat reports "initializing server" then shortly thereafter
reports "Waiting or modem to come available" and of course no fax is
transmitted.

When I attempt to use xonxoff with /dev/ttym2 sendafax does initialize
the server the modem dials and the receiving fax machine answers but
absolutely nothing is transmitted; faxstat eventually reports "Unknown
problem ( check modem power ).

The modem is a USrobotics sportster 56k faxmodem configured in class
2.0.

Anyone ?

Here is a Trace log from one of the xonxoff calls.

Apr 30 15:53:19.61: [27111]: SEND FAX: JOB 5 DEST XXX-XXXX COMMID
00000004
Apr 30 15:53:19.61: [27111]: DELAY 2600 ms
Apr 30 15:53:22.21: [27111]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Apr 30 15:53:22.36: [27111]: --> [16:ATE0V1Q0X4S0=0H0]
Apr 30 15:53:22.36: [27111]: --> [2:OK]
Apr 30 15:53:22.36: [27111]: <-- [32:ATS8=2S7=60&H2&I2&R1S13=1&D2&C1\r]
Apr 30 15:53:22.51: [27111]: --> [2:OK]
Apr 30 15:53:22.51: [27111]: <-- [14:AT+FCLASS=2.0\r]
Apr 30 15:53:22.65: [27111]: --> [2:OK]
Apr 30 15:53:22.65: [27111]: <-- [9:AT+FLO=1\r]
Apr 30 15:53:22.79: [27111]: --> [2:OK]
Apr 30 15:53:22.79: [27111]: <-- [9:AT+FPP=0\r]
Apr 30 15:53:22.93: [27111]: --> [2:OK]
Apr 30 15:53:22.93: [27111]: <-- [9:AT+FBO=0\r]
Apr 30 15:53:23.07: [27111]: --> [2:OK]
Apr 30 15:53:23.07: [27111]: <-- [10:AT+FCT=30\r]
Apr 30 15:53:23.22: [27111]: --> [2:OK]
Apr 30 15:53:23.22: [27111]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 30 15:53:23.37: [27111]: --> [2:OK]
Apr 30 15:53:23.37: [27111]: <-- [9:AT+FIE=0\r]
Apr 30 15:53:23.51: [27111]: --> [2:OK]
Apr 30 15:53:23.51: [27111]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 30 15:53:23.66: [27111]: --> [2:OK]
Apr 30 15:53:23.66: [27111]: <-- [5:ATM0\r]
Apr 30 15:53:23.80: [27111]: --> [2:OK]
Apr 30 15:53:23.81: [27111]: <-- [14:AT+FCLASS=2.0\r]
Apr 30 15:53:24.03: [27111]: --> [2:OK]
Apr 30 15:53:24.03: [27111]: <-- [9:AT+FLO=1\r]
Apr 30 15:53:24.25: [27111]: --> [2:OK]
Apr 30 15:53:24.25: [27111]: <-- [9:AT+FPP=0\r]
Apr 30 15:53:24.47: [27111]: --> [2:OK]
Apr 30 15:53:24.47: [27111]: <-- [9:AT+FBO=0\r]
Apr 30 15:53:24.69: [27111]: --> [2:OK]
Apr 30 15:53:24.69: [27111]: <-- [10:AT+FCT=30\r]
Apr 30 15:53:24.92: [27111]: --> [2:OK]
Apr 30 15:53:24.93: [27111]: <-- [15:AT+FNR=1,1,1,1\r]
Apr 30 15:53:25.16: [27111]: --> [2:OK]
Apr 30 15:53:25.16: [27111]: <-- [9:AT+FIE=0\r]
Apr 30 15:53:25.38: [27111]: --> [2:OK]
Apr 30 15:53:25.38: [27111]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Apr 30 15:53:25.61: [27111]: --> [2:OK]
Apr 30 15:53:25.61: [27111]: <-- [14:AT+FLI="NCCS"\r]
Apr 30 15:53:25.84: [27111]: --> [2:OK]
Apr 30 15:53:25.87: [27111]: DIAL 553-1180
Apr 30 15:53:25.87: [27111]: <-- [13:ATDTXXX-XXXX\r]
Apr 30 15:56:26.21: [27111]: SEND FAILED: Unknown problem (check modem
power)
Apr 30 15:56:26.21: [27111]: <-- [5:ATH0\r]
Apr 30 15:56:26.43: [27111]: --> [4:ATH0]
Apr 30 15:56:26.43: [27111]: --> [2:OK]
Apr 30 15:56:26.43: [27111]: SESSION END

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: raoul@cirl.meei.harvard.edu
Date: Wed, 30 Apr 97 19:12:17 EDT
To: eroberts@healthcare.com
Cc: flexfax@sgi.com
Subject: Re: HylaFAX for HP/UX 10.20
Reply-To: raoul@cirl.meei.harvard.edu
Sender: owner-flexfax@celestial.com

-----BEGIN PGP SIGNED MESSAGE-----


Start with probemodem: see what you get there. Also, shouldn't you be
using HylaFAX v4.0pl1? And have you confirmed that cu and faxgetty are
using the same style and location of lock files?

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu



-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
Comment: Processed by Mailcrypt 3.4, an Emacs/PGP interface

iQCVAwUBM2fRzD/+ItycgIJRAQEXaQQAhGDtTiVmWplW22VyKbNoceb7vlRtMF3r
fYwm+UN110Sh+0MTFzyZ7sxEvaCVrD67St+e0z1rok4BbKTQjZnQC6O06Dvbbymo
iHynFkLqwQ4m/VVjUbU6D3thy+c/vNUdv/lHaJi4/k6UzXCtPDrDbHEO/xIeZFFg
CIEBUYVS9Yc=
=mxWb
-----END PGP SIGNATURE-----

From owner-flexfax@celestial.com  Wed Feb 17 13:55:07 1999
From: "Gower, David" <DGower@chw.org>
To: "'flexfax@sgi.com'" <flexfax@sgi.com>
Subject: Source build  on linux kernel ver 1.3.2
Date: Wed, 30 Apr 1997 18:49:51 -0500
Sender: owner-flexfax@celestial.com

I get an error "Cannot locate termios.h or sys/termios.h"
"Unrecoverable error!  Once you've corrected the problem rerun this
script"  

I did a find and I found those file in the /usr/include and
/usr/include/sys directories.  

This is the second time I installed Hylafax on simular machines.  I am
baffled could someone please help me?

Regards 
Dave

