NAME

    curl - transfer a URL

SYNOPSIS

    curl [options / URLs]

DESCRIPTION

    curl is a tool  for transferring data  from or to a  server using URLs.  It
    supports these protocols:  DICT, FILE,  FTP, FTPS,  GOPHER, GOPHERS,  HTTP,
    HTTPS, IMAP, IMAPS,  LDAP, LDAPS,  MQTT, MQTTS, POP3,  POP3S, RTMP,  RTMPS,
    RTSP, SCP, SFTP, SMB, SMBS, SMTP, SMTPS, TELNET, TFTP, WS and WSS.

    curl  is  powered  by  libcurl  for  all  transfer-related  features.   See
    libcurl(3) for details.

URL

    The URL syntax is protocol-dependent.  You can find a detailed  description
    in RFC 3986.

    If you provide  a URL without  a leading  protocol:// scheme, curl  guesses
    what protocol you want. It then  defaults to HTTP but assumes others  based
    on often-used hostname prefixes. For  example, for hostnames starting  with
    "ftp." curl assumes you want FTP.

    You can specify any  amount of URLs on the  command line. They are  fetched
    in a sequential manner  in the specified  order unless you use  --parallel.
    You can specify  command line options and  URLs mixed and  in any order  on
    the command line.

    curl attempts to reuse connections  when doing multiple transfers, so  that
    getting many files from  the same server do  not use multiple connects  and
    setup handshakes. This improves  speed. Connection reuse  can only be  done
    for URLs  specified for  a single  command line  invocation  and cannot  be
    performed between separate curl runs.

    Provide an IPv6 zone  id in the URL with  an escaped percentage sign.  Like
    in

	http://[fe80::3%25eth0]/

    Everything provided on the command line  that is not a command line  option
    or its argument, curl assumes is a URL and treats it as such.

GLOBBING

    You can specify  multiple URLs  or parts  of URLs by  writing lists  within
    braces or ranges within brackets. We call this "globbing".

    Provide a list with three different names like this:

	https://fun.example/{one,two,three}.jpg

	sftp://{one,two,three}.example/README

    Do sequences of alphanumeric series by using [] as in:

	ftp://ftp.example.com/file[1-100].txt

    With leading zeroes:

	ftp://ftp.example.com/file[001-100].txt

    With letters through the alphabet:

	ftp://ftp.example.com/file[a-z].txt

    Nested sequences are not  supported, but you can  use several ones next  to
    each other:

	https://example.com/archive[1996-1999]/vol[1-4]/part{a,b,c}.html

    You can specify a step  counter for the ranges  to get every Nth number  or
    letter:

	https://example.com/file[1-100:10].txt

	https://example.com/file[a-z:2].txt

    When using [] or {} sequences when invoked from a command line  prompt, you
    probably have to put the full  URL within double quotes to avoid the  shell
    from interfering  with it.  This  also goes  for other  characters  treated
    special, like for example '&', '?' and '*'.

    Switch off globbing with --globoff.

VARIABLES

    curl supports command line variables  (added in 8.3.0). Set variables  with
    --variable name=content or --variable name@file (where "file" can be  stdin
    if set to a single dash (-)).

    Variable contents can be expanded in option parameters using "{{name}}"  if
    the option name  is prefixed with  "--expand-". This  gets the contents  of
    the variable "name" inserted, or  a blank if the  name does not exist as  a
    variable. Insert  "{{"  verbatim  in the  string  by prefixing  it  with  a
    backslash, like "\{{".

    You can  access and  expand environment  variables by  importing them  with
    "--variable %name". This imports the variable called "name" but exits  with
    an error if  that environment  variable is  not already set.  To provide  a
    default  value   in  case   it  is   not  already   set,  use   "--variable
    %name=content" or "--variable %name@content".

    Example: get the USER  environment variable and  expand into the URL,  fail
    if USER is not set:

	--variable '%USER'
	--expand-url = "https://example.com/api/{{USER}}/method"

    When expanding variables, curl  supports a set  of functions that can  make
    the variable  contents more  convenient to  use. It  can  trim leading  and
    trailing white  space with "trim",  output the  contents as  a JSON  quoted
    string with  "json", URL encode  the string  with "url",  base64 encode  it
    with "b64"  and base64  decode it  with "64dec".  To apply  functions to  a
    variable expansion,  add them  colon separated  to the  right  side of  the
    variable. Variable content  holding null  bytes that are  not encoded  when
    expanded causes an error.

    Example: get the contents  of a file  called $HOME/.secret into a  variable
    called "fix". Make  sure that  the content is  trimmed and  percent-encoded
    when sent as POST data:

	--variable %HOME
	--expand-variable fix@{{HOME}}/.secret
	--expand-data "{{fix:trim:url}}"
	https://example.com/

    Command line variables and expansions were added in 8.3.0.

OUTPUT

    If not told otherwise, curl writes  the received data to stdout. It can  be
    instructed to instead save that data into a local file, using  the --output
    or --remote-name options.  If curl is  given multiple  URLs to transfer  on
    the command line,  it similarly needs  multiple options  for where to  save
    them.

    curl does  not  parse or  otherwise "understand"  the  content it  gets  or
    writes as output. It does no encoding or decoding, unless  explicitly asked
    to with dedicated command line options.

PROTOCOLS

    curl supports  numerous  protocols, or  put  in URL  terms:  schemes.  Your
    particular build may not support them all.

    DICT

	Lets you lookup words using online dictionaries.

    FILE

	Read or write local files. curl does not support accessing  file:// URL
	remotely, but when running  on Microsoft Windows  using the native  UNC
	approach works. Only absolute paths.

    FTP(S)

	curl supports  the File  Transfer Protocol  with a  lot  of tweaks  and
	levers. With or without using TLS.

    GOPHER(S)

	Retrieve files.

    HTTP(S)

	curl supports HTTP with numerous  options and variations. It can  speak
	HTTP version 0.9, 1.0, 1.1, 2 and 3 depending on build options  and the
	correct command line options.

    IMAP(S)

	Using the  mail reading  protocol, curl  can download  emails for  you.
	With or without using TLS.

    LDAP(S)

	curl can do directory lookups for you, with or without TLS.

    MQTT

	curl supports MQTT version 3. Downloading over MQTT equals  subscribing
	to a topic while uploading/posting  equals publishing on a topic.  MQTT
	over TLS is not supported (yet).

    POP3(S)

	Downloading from a pop3 server means getting an email. With  or without
	using TLS.

    RTMP(S)

	The Realtime Messaging  Protocol is primarily  used to serve  streaming
	media and curl can download it.

    RTSP

	curl supports RTSP 1.0 downloads.

    SCP

	curl supports SSH version 2 scp transfers.

    SFTP

	curl supports SFTP (draft 5) done over SSH version 2.

    SMB(S)

	curl supports SMB version 1 for upload and download.

    SMTP(S)

	Uploading contents to an  SMTP server means  sending an email. With  or
	without TLS.

    TELNET

	Fetching a  telnet URL  starts an  interactive session  where it  sends
	what it reads on stdin and outputs what the server sends it.

    TFTP

	curl can do TFTP downloads and uploads.

    WS(S)

	WebSocket done over HTTP/1. WSS implies that it works over HTTPS.

PROGRESS METER

    curl normally displays a progress  meter during operations, indicating  the
    amount of transferred data, transfer  speeds and estimated time left,  etc.
    The progress  meter displays the  transfer rate  in bytes  per second.  The
    used suffixes ("k" for kilo, "M" for mega, "G" for giga, "T" for  tera, "P"
    for peta and "E" for exa) are 1024 based. For example 1k is 1024  bytes. 1M
    is 1048576  bytes. Strictly  speaking  this makes  the units  kibibyte  and
    mebibyte etc.

    curl displays this data to the  terminal by default, so if you invoke  curl
    to do  an operation  and it  is about  to write  data to  the terminal,  it
    disables the  progress  meter as  otherwise it  would  mess up  the  output
    mixing progress meter and response data.

    If you want a  progress meter for  HTTP POST or PUT  requests, you need  to
    redirect the response output to a file, using shell redirect  (>), --output
    or similar.

    This does not apply to FTP upload  as that operation does not spit out  any
    response data to the terminal.

    If you prefer a progress  bar instead of the regular meter,  --progress-bar
    is your friend.  You can also  disable the  progress meter completely  with
    the --silent option.

VERSION

    This man page describes  curl 8.19.0. If you  use a later version,  chances
    are this  man page  does  not fully  document  it. If  you use  an  earlier
    version, this document  tries to  include version  information about  which
    specific version that introduced changes.

    You can always learn which the latest curl version is by running

	curl https://curl.se/info

    The  online  version  of  this  man  page  is  always  showing  the  latest
    incarnation: https://curl.se/docs/manpage.html

OPTIONS

    Options start  with one  or  two dashes.  Many of  the options  require  an
    additional value  next to  them. If  provided text  does not  start with  a
    dash, it is presumed to be and treated as a URL.

    The short "single-dash" form  of the options, -d  for example, may be  used
    with or without a  space between it  and its value, although  a space is  a
    recommended separator.  The  long  double-dash form,  --data  for  example,
    requires a space between it and its value.

    Short version options that  do not need any  additional values can be  used
    immediately next to each  other, like for example  you can specify all  the
    options -O, -L and -v at once as -OLv.

    In general, all  boolean options are  enabled with  --option and yet  again
    disabled with  --no-option.  That is,  you use  the  same option  name  but
    prefix it with "no-". In this  list we mostly show the --option version  of
    them.

    When --next is used, it resets the parser state and you start again  with a
    clean option state, except for the options that are global.  Global options
    retain their values and meaning even after --next.

    If the long  option name ends with  an equals sign  ("="), the argument  is
    the text following on its right side. (Added in 8.16.0)

    The first argument  that is  exactly two  dashes ("--"), marks  the end  of
    options; any argument  after the  end of  options is interpreted  as a  URL
    argument even if it starts with a dash.

    curl does  little  to  no verification  of  the contents  of  command  line
    arguments.  Passing  in  "creative  octets"  like  newlines  might  trigger
    unexpected results.

    The   following    options    are    global:    --fail-early,    --libcurl,
    --parallel-immediate,  --parallel-max-host,   --parallel-max,   --parallel,
    --progress-bar,   --rate,    --show-error,    --stderr,    --styled-output,
    --trace-ascii,  --trace-config,  --trace-ids,  --trace-time,  --trace   and
    --verbose.

ALL OPTIONS

    --abstract-unix-socket <path>
	    (HTTP) Connect  to  the  server through  an  abstract  Unix  domain
	    socket, instead of using the network. Note: netstat shows the  path
	    of an  abstract  socket  prefixed  with  "@",  however  the  <path>
	    argument   should   not   have    this   leading   character.    If
	    --abstract-unix-socket is  provided  several times,  the  last  set
	    value is used.

	    Example:
	     curl --abstract-unix-socket socketpath https://example.com

	    See also --unix-socket.

    --alt-svc <filename>
	    (HTTPS) Enable the  alt-svc parser.  If the filename  points to  an
	    existing alt-svc  cache file,  that gets  used. After  a  completed
	    transfer, the cache is saved to  the filename again if it has  been
	    modified.

	    Specify a ""  filename (zero  length) to  avoid loading/saving  and
	    make curl handle the cache in memory.

	    You may want to restrict your  umask to prevent other users on  the
	    same system to access the created file.

	    If this option is used several times, curl loads contents  from all
	    the files but  the last one  is used for  saving. --alt-svc can  be
	    used several times in a command line

	    Example:
	     curl --alt-svc svc.txt https://example.com

	    See also --resolve and --connect-to.

    --anyauth
	    (HTTP) Figure out authentication method automatically, and use  the
	    most secure one the remote site claims to support. This is  done by
	    first doing  a  request  and checking  the  response-headers,  thus
	    possibly inducing an extra network round-trip. This option is  used
	    instead of setting a specific authentication method, which you  can
	    do with --basic, --digest, --ntlm, and --negotiate.

	    Using --anyauth is not  recommended if you  do uploads from  stdin,
	    since it may  require data  to be  sent twice and  then the  client
	    must be able  to rewind. If  the need  should arise when  uploading
	    from stdin, the upload operation fails.

	    Used together with --user.

	    Example:
	     curl --anyauth --user me:pwd https://example.com

	    See also --proxy-anyauth, --basic and --digest.

    -a, --append
	    (FTP SFTP) When used  in an upload,  this option makes curl  append
	    to the target file  instead of overwriting  it. If the remote  file
	    does not exist, it  is created. Note that  this flag is ignored  by
	    some SFTP servers (including OpenSSH). Providing --append  multiple
	    times has no extra effect. Disable it again with --no-append.

	    Example:
	     curl --upload-file local --append ftp://example.com/

	    See also --range and --continue-at.

    --aws-sigv4 <provider1[:prvdr2[:reg[:srv]]]>
	    (HTTP) Use AWS V4 signature authentication in the transfer.

	    The provider argument  is a string  that is  used by the  algorithm
	    when creating outgoing authentication headers.

	    The region argument is  a string that  points to a geographic  area
	    of a resources  collection (region-code)  when the  region name  is
	    omitted from the endpoint.

	    The  service argument  is  a  string  that  points  to  a  function
	    provided by  a  cloud  (service-code)  when  the  service  name  is
	    omitted from  the  endpoint.  If --aws-sigv4  is  provided  several
	    times, the last set value is used.

	    Example:
	     curl --aws-sigv4 "aws:amz:us-east-2:es" --user "key:secret" \
		  https://example.com

	    Added in 7.75.0. See also --basic and --user.

    --basic
	    (HTTP) Use HTTP  Basic authentication  with the  remote host.  This
	    method is the default and this option is usually pointless,  unless
	    you use  it  to  override  a  previously set  option  that  sets  a
	    different authentication  method  (such  as  --ntlm,  --digest,  or
	    --negotiate).

	    Used together with --user. Providing --basic multiple times has  no
	    extra effect. Disable it again with --no-basic.

	    Example:
	     curl -u name:password --basic https://example.com

	    See also --proxy-basic.

    --ca-native
	    (TLS) Use the  operating system's native  CA store for  certificate
	    verification.

	    This option is  independent of other  CA certificate locations  set
	    at  run time  or  build  time.  Those  locations  are  searched  in
	    addition to the native CA store.

	    This option works with OpenSSL and its forks (LibreSSL,  BoringSSL,
	    etc) on Windows (Added in 7.71.0)  and on Apple OS when libcurl  is
	    built with Apple SecTrust enabled. (Added in 8.17.0)

	    This option works with wolfSSL  on Windows, Linux (Debian,  Ubuntu,
	    Gentoo, Fedora, RHEL), macOS, Android and iOS. (Added in 8.3.0)

	    This option works with GnuTLS (Added in 8.5.0) and also  uses Apple
	    SecTrust when libcurl is built with it. (Added in 8.17.0)

	    This option works with Rustls  on Windows, macOS, Android and  iOS.
	    On Linux  it is  equivalent  to using  the Mozilla  CA  certificate
	    bundle. When  used  with  Rustls  _only_ the  native  CA  store  is
	    consulted, not  other locations  set  at run  time or  build  time.
	    (Added in 8.13.0)

	    This option  currently has  no  effect for  Schannel. This  is  the
	    native TLS library from Microsoft, that by default uses the  native
	    CA store for  verification unless  overridden by  a CA  certificate
	    location setting.  Providing  --ca-native  multiple  times  has  no
	    extra effect. Disable it again with --no-ca-native.

	    Example:
	     curl --ca-native https://example.com

	    Added in  8.2.0.  See  also  --cacert,  --capath,  --dump-ca-embed,
	    --insecure and --proxy-ca-native.

    --cacert <file>
	    (TLS) Use the specified  certificate file to  verify the peer.  The
	    file may contain multiple CA certificates. The certificate(s)  must
	    be in PEM format. Normally curl is built to use a default  file for
	    this, so this option is typically used to alter that default file.

	    curl recognizes the environment variable named 'CURL_CA_BUNDLE'  if
	    it is set and the TLS  backend is not Schannel, and uses the  given
	    path as a  path to  a CA  cert bundle. This  option overrides  that
	    variable.

	    (Windows) curl  automatically  looks  for a  CA  certs  file  named
	    'curl-ca-bundle.crt', either in the same directory as curl.exe,  or
	    in the  Current Working  Directory,  or in  any folder  along  your
	    PATH.

	    curl 8.11.0  added  a  build-time option  to  disable  this  search
	    behavior,  and   another  option   to   restrict  search   to   the
	    application's directory.

	    (Schannel) This option is  supported for Schannel  in Windows 7  or
	    later (added  in 7.60.0).  This option  is supported  for  backward
	    compatibility with other SSL engines; instead it is recommended  to
	    use  Windows'  store   of  root  certificates   (the  default   for
	    Schannel). If  --cacert is  provided several  times, the  last  set
	    value is used.

	    Example:
	     curl --cacert CA-file.txt https://example.com

	    See also --capath, --dump-ca-embed and --insecure.

    --capath <dir>
	    (TLS) Use the specified certificate  directory to verify the  peer.
	    If curl is built  against OpenSSL, multiple  paths can be  provided
	    by  separating   them   with  the   appropriate   platform-specific
	    separator (e.g.  "path1:path2:path3"  on Unix-style  platforms  for
	    "path1;path2;path3" on Windows).

	    The certificates  must  be in  PEM format,  and  if curl  is  built
	    against OpenSSL, the directory must  have been processed using  the
	    c_rehash utility supplied  with OpenSSL. Using  --capath can  allow
	    OpenSSL-powered curl to make SSL-connections much more  efficiently
	    than  using  --cacert  if  the  --cacert  file  contains  many   CA
	    certificates.

	    If this  option is set,  the default  capath value  is ignored.  If
	    --capath is provided several times, the last set value is used.

	    Example:
	     curl --capath /local/directory https://example.com

	    See also --cacert, --dump-ca-embed and --insecure.

    -E, --cert <certificate[:password]>
	    (TLS) Use  the specified  client certificate  file when  getting  a
	    file  with  HTTPS,   FTPS  or  another   SSL-based  protocol.   The
	    certificate must be  PEM format.  If the optional  password is  not
	    specified, it  is  queried for  on  the terminal.  Note  that  this
	    option assumes a certificate file  that is the private key and  the
	    client certificate concatenated.  See --cert and  --key to  specify
	    them independently.

	    In the <certificate> portion of  the argument, you must escape  the
	    character ":" as "\:" so that it is not recognized as  the password
	    delimiter. Similarly, you  must escape the  double quote  character
	    as \" so that it is not recognized as an escape character.

	    If curl is built against  OpenSSL, and the engine pkcs11 or  pkcs11
	    provider is available, then  a PKCS#11 URI  (RFC 7512) can be  used
	    to specify  a certificate  located in  a PKCS#11  device. A  string
	    beginning with  "pkcs11:" is  interpreted as  a PKCS#11  URI. If  a
	    PKCS#11 URI  is  provided,  then  the --engine  option  is  set  as
	    "pkcs11" if none was provided and the --cert-type option is  set as
	    "ENG"  or  "PROV"  if  none  was  provided  (depending  on  OpenSSL
	    version).

	    If curl  is built  against GnuTLS,  a PKCS#11  URI can  be used  to
	    specify a  certificate  located  in  a  PKCS#11  device.  A  string
	    beginning with "pkcs11:" is interpreted as a PKCS#11 URI.

	    (Schannel)  Client  certificates  must  be  specified  by  a   path
	    expression to a certificate store.  (Loading PFX is not  supported;
	    you  can  import  it  to  a  store  first).  You  can  use  "<store
	    location>\<store name>\<thumbprint>" to refer  to a certificate  in
	    the     system      certificates      store,      for      example,
	    "CurrentUser\MY\934a7ac6f8a5d579285a74fa61e19f23ddfe8d7a".
	    Thumbprint is  usually a  SHA-1 hex  string which  you  can see  in
	    certificate  details.  Following  store  locations  are  supported:
	    CurrentUser,      LocalMachine,      CurrentService,      Services,
	    CurrentUserGroupPolicy,         LocalMachineGroupPolicy         and
	    LocalMachineEnterprise. If --cert  is provided  several times,  the
	    last set value is used.

	    Example:
	     curl --cert certfile --key keyfile https://example.com

	    See also --cert-type, --key and --key-type.

    --cert-status
	    (TLS) Verify  the status  of the  server certificate  by using  the
	    Certificate Status Request (aka. OCSP stapling) TLS extension.

	    If this option  is enabled and  the server  sends an invalid  (e.g.
	    expired)  response,  if  the  response  suggests  that  the  server
	    certificate has been revoked,  or no response  at all is  received,
	    the verification fails.

	    This support  is  currently only  implemented  in the  OpenSSL  and
	    GnuTLS backends.  Providing  --cert-status multiple  times  has  no
	    extra effect. Disable it again with --no-cert-status.

	    Example:
	     curl --cert-status https://example.com

	    See also --pinnedpubkey.

    --cert-type <type>
	    (TLS) Set type of the  provided client certificate. PEM, DER,  ENG,
	    PROV and P12 are recognized types.

	    The default type  depends on the  TLS backend  and is usually  PEM.
	    For Schannel it  is P12.  If --cert is  a pkcs11: URI  then ENG  or
	    PROV is  the  default  type  (depending  on  OpenSSL  version).  If
	    --cert-type is provided several times, the last set value is used.

	    Example:
	     curl --cert-type PEM --cert file https://example.com

	    See also --cert, --key and --key-type.

    --ciphers <list>
	    (TLS) Specify which cipher  suites to use  in the connection if  it
	    negotiates TLS  1.2 (1.1,  1.0). The  list of  ciphers suites  must
	    specify valid  ciphers. Read  up on  cipher suite  details on  this
	    URL:

	    https://curl.se/docs/ssl-ciphers.html  If  --ciphers  is   provided
	    several times, the last set value is used.

	    Example:
	     curl --ciphers ECDHE-ECDSA-AES128-GCM-SHA256:\
		  ECDHE-RSA-AES128-GCM-SHA256 https://example.com

	    See also --tls13-ciphers, --proxy-ciphers and --curves.

    --compressed
	    (HTTP) Request a  compressed response using  one of the  algorithms
	    curl supports, and automatically decompress the content.

	    Response headers  are  not modified  when  saved, so  if  they  are
	    "interpreted" separately again at a  later point they might  appear
	    to be saying that the content is (still) compressed; while  in fact
	    it has already been decompressed.

	    If  this option  is  used  and  the  server  sends  an  unsupported
	    encoding, curl reports an error.  This is a request, not an  order;
	    the server may or may not deliver data compressed.

	    WARNING: when  decompressing data,  even  tiny transfers  might  be
	    expanded  and   generate  a   huge  amount   of  bytes.   Providing
	    --compressed multiple times has no  extra effect. Disable it  again
	    with --no-compressed.

	    Example:
	     curl --compressed https://example.com

	    See also --compressed-ssh.

    --compressed-ssh
	    (SCP SFTP)  Enable  SSH compression.  This  is a  request,  not  an
	    order; the server may or may not do it. This allows the data  to be
	    sent compressed over  the wire, and  automatically decompressed  in
	    the receiving end,  to save  bandwidth. Providing  --compressed-ssh
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-compressed-ssh.

	    Example:
	     curl --compressed-ssh sftp://example.com/

	    See also --compressed.

    -K, --config <file>
	    Specify a text file to  read curl arguments from. The command  line
	    arguments found in the text file are used as if they  were provided
	    on the command line.

	    Options and their parameters must be specified on the same  line in
	    the file, separated by whitespace, colon, or the equals sign.  Long
	    option names can  optionally be  given in the  config file  without
	    the  initial  double  dashes  and  if  so,  the  colon   or  equals
	    characters can be used  as separators. If  the option is  specified
	    with one or two dashes, there  can be no colon or equals  character
	    between the option and its parameter.

	    If the parameter contains whitespace or starts with a colon  (:) or
	    equals sign  (=),  it  must be  specified  enclosed  within  double
	    quotes ("like  this"). Within  double quotes  the following  escape
	    sequences are available:  \\, \", \t,  \n, \r  and \v. A  backslash
	    preceding any other letter is ignored.

	    If the first non-blank column of a config line is a  '#' character,
	    that line is treated as a comment.

	    Only write  one option  per physical  line in  the  config file.  A
	    single line  is required to  be no  more than  10 megabytes  (since
	    8.2.0).

	    Specify the filename  to --config as  minus "-"  to make curl  read
	    the file from stdin.

	    Note that to be able to specify a URL in the config file,  you need
	    to specify it using  the --url option, and  not by writing the  URL
	    on its own line. It could look similar to this:

		url = "https://curl.se/docs/"

		# --- Example file ---
		# this is a comment
		url = "example.com"
		output = "curlhere.html"
		user-agent = "superagent/1.0"

		# and fetch another URL too
		url = "example.com/docs/manpage.html"
		-O
		referer = "http://nowhereatall.example.com/"
		# --- End of example file ---

	    When curl is invoked,  it (unless --disable  is used) checks for  a
	    default config file  and uses it  if found,  even when --config  is
	    used. The  default config  file  is checked  for in  the  following
	    places in this order:

	    1) "$CURL_HOME/.curlrc"

	    2) "$XDG_CONFIG_HOME/curlrc" (Added in 7.73.0)

	    3) "$HOME/.curlrc"

	    4) Windows: "%USERPROFILE%\.curlrc"

	    5) Windows: "%APPDATA%\.curlrc"

	    6) Windows: "%USERPROFILE%\Application Data\.curlrc"

	    7) Non-Windows: use getpwuid to find the home directory

	    8) On  Windows,  if  it  finds  no .curlrc  file  in  the  sequence
	    described above, it checks for  one in the same directory the  curl
	    executable is placed.

	    On Windows  two filenames  are checked  per location:  .curlrc  and
	    _curlrc, preferring the former.  Older versions on Windows  checked
	    for _curlrc only. --config can  be used several times in a  command
	    line

	    Example:
	     curl --config file.txt https://example.com

	    See also --disable.

    --connect-timeout <seconds>
	    Maximum time in seconds that  you allow curl's connection to  take.
	    This only limits the connection  phase, so if curl connects  within
	    the given period it continues - if not it exits.

	    This option accepts decimal values.  The decimal value needs to  be
	    provided using  a dot  (.) as  decimal separator  -  not the  local
	    version even if it might be using another separator.

	    The connection phase  is considered  complete when  the DNS  lookup
	    and  requested  TCP,   TLS  or   QUIC  handshakes   are  done.   If
	    --connect-timeout is provided several times, the last set value  is
	    used.

	    Examples:
	     curl --connect-timeout 20 https://example.com
	     curl --connect-timeout 3.14 https://example.com

	    See also --max-time.

    --connect-to <HOST1:PORT1:HOST2:PORT2>
	    For a  request  intended for  the  "HOST1:PORT1" pair,  connect  to
	    "HOST2:PORT2" instead. This  option is only  used to establish  the
	    network connection.  It does  NOT affect  the hostname/port  number
	    that is used  for TLS/SSL (e.g.  SNI, certificate verification)  or
	    for the application protocols.

	    "HOST1" and "PORT1" may be  empty strings, meaning any host or  any
	    port number.  "HOST2"  and  "PORT2"  may  also  be  empty  strings,
	    meaning use the request's original hostname and port number.

	    A hostname specified to this option is compared as a string,  so it
	    needs to match the name used  in the request URL. It can be  either
	    numerical such  as  "127.0.0.1"  or  the full  host  name  such  as
	    "example.org".

	    Example:  redirect  connects  from  the  example.com  hostname   to
	    127.0.0.1 independently of port number:

		curl --connect-to example.com::127.0.0.1: https://example.com/

	    Example:  redirect  connects  from   all  hostnames  to   127.0.0.1
	    independently of port number:

		curl --connect-to ::127.0.0.1: http://example.com/

	    --connect-to can be used several times in a command line

	    Example:
	     curl --connect-to example.com:443:example.net:8443 \
		  https://example.com

	    See also --resolve and --header.

    -C, --continue-at <offset>
	    Resume a previous transfer  from the given  byte offset. The  given
	    offset is  the exact  number of  bytes that  are skipped,  counting
	    from the beginning of the  source file before it is transferred  to
	    the destination. If used with uploads, the FTP server command  SIZE
	    is not used by curl.

	    Use "-C -" to instruct curl to automatically find out  where/how to
	    resume the transfer. It then  uses the given output/input files  to
	    figure that out.

	    When  using this  option  for  HTTP  uploads  using  POST  or  PUT,
	    functionality is not guaranteed. The HTTP protocol has no  standard
	    interoperable resume  upload and  curl uses  a set  of headers  for
	    this purpose that  once proved  working for some  servers and  have
	    been left for those who find that useful.

	    This command line  option is mutually  exclusive with --range:  you
	    can only use one of them for a single transfer.

	    The --no-clobber  and  --remove-on-error  options  cannot  be  used
	    together with --continue-at. If  --continue-at is provided  several
	    times, the last set value is used.

	    Examples:
	     curl -C - https://example.com
	     curl -C 400 https://example.com

	    See also --range.

    -b, --cookie <data|filename>
	    (HTTP)  This  option  has  two  slightly  separate  cookie  sending
	    functions.

	    Either: pass  the exact  data to  send to  the HTTP  server in  the
	    Cookie header. It is supposedly  data previously received from  the
	    server in a "Set-Cookie:"  line. The data  should be in the  format
	    "NAME1=VALUE1;  NAME2=VALUE2".  When  given   a  set  of   specific
	    cookies,  curl  populates  its  cookie  header  with  this  content
	    explicitly in  all outgoing  request(s). If  multiple requests  are
	    done due  to authentication,  followed redirects  or similar,  they
	    all get this cookie header passed on.

	    Or: If  no  "=" symbol  is  used in  the  argument, it  is  instead
	    treated as a filename to  read previously stored cookie from.  This
	    option also activates  the cookie  engine which  makes curl  record
	    incoming cookies,  which may  be handy  if you  are  using this  in
	    combination  with  the  --location   option  or  do  multiple   URL
	    transfers on the same invoke.

	    If the filename is  a single minus  ("-"), curl reads the  contents
	    from stdin. If  the filename  is an  empty string ("")  and is  the
	    only cookie input,  curl activates  the cookie  engine without  any
	    cookies.

	    The file format of  the file to read  cookies from should be  plain
	    HTTP headers  (Set-Cookie  style) or  the  Netscape/Mozilla  cookie
	    file format.

	    The file specified with --cookie is only used as input.  No cookies
	    are written to that  file. To store  cookies, use the  --cookie-jar
	    option.

	    If you use the Set-Cookie file  format and do not specify a  domain
	    then the  cookie is not  sent since  the domain  never matches.  To
	    address this, set a domain in Set-Cookie line (doing that  includes
	    subdomains) or preferably: use the Netscape format.

	    Users often  want  to  both read  cookies  from a  file  and  write
	    updated  cookies back  to  a  file,  so  using  both  --cookie  and
	    --cookie-jar in the same command line is common.

	    If curl is built with PSL (Public Suffix List) support,  it detects
	    and discards cookies  that are  specified for  such suffix  domains
	    that should not be  allowed to have cookies.  If curl is not  built
	    with  PSL support,  it  has  no  ability  to  stop  super  cookies.
	    --cookie can be used several times in a command line

	    Examples:
	     curl -b "" https://example.com
	     curl -b cookiefile https://example.com
	     curl -b cookiefile -c cookiefile https://example.com
	     curl -b name=Jane https://example.com

	    See also --cookie-jar and --junk-session-cookies.

    -c, --cookie-jar <filename>
	    (HTTP) Specify to  which file you  want curl  to write all  cookies
	    after a  completed  operation. curl  writes  all cookies  from  its
	    in-memory  cookie  storage  to  the  given  file  at  the   end  of
	    operations. Even  if no cookies  are known,  a file  is created  so
	    that it removes any  formerly existing cookies  from the file.  The
	    file uses the Netscape cookie file format. If you set  the filename
	    to a single minus, "-", the cookies are written to stdout.

	    The file specified with  --cookie-jar is only  used for output.  No
	    cookies are read from the  file. To read cookies, use the  --cookie
	    option. Both options can specify the same file.

	    This command line  option activates  the cookie  engine that  makes
	    curl record and  use cookies.  The --cookie  option also  activates
	    it.

	    If the cookie jar cannot be  created or written to, the whole  curl
	    operation does  not fail  or even  report an  error clearly.  Using
	    --verbose gets a warning  displayed, but that  is the only  visible
	    feedback you get about this possibly lethal situation.

	    You may want to restrict your  umask to prevent other users on  the
	    same  system  to  access  the  created  file.  If  --cookie-jar  is
	    provided several times, the last set value is used.

	    Examples:
	     curl -c store-here.txt https://example.com
	     curl -c store-here.txt -b read-these https://example.com

	    See also --cookie and --junk-session-cookies.

    --create-dirs
	    When used in  conjunction with  the --output  option, curl  creates
	    the necessary  local directory  hierarchy  as needed.  This  option
	    creates  the  directories  mentioned   with  the  --output   option
	    combined with  the  path possibly  set  with --output-dir.  If  the
	    combined output filename uses no  directory, or if the  directories
	    it mentions already exist, no directories are created.

	    Created directories  are made  with mode  0750 on  Unix-style  file
	    systems.

	    To  create  remote  directories  when   using  FTP  or  SFTP,   try
	    --ftp-create-dirs. Providing  --create-dirs multiple  times has  no
	    extra effect. Disable it again with --no-create-dirs.

	    Example:
	     curl --create-dirs --output local/dir/file https://example.com

	    See also --ftp-create-dirs and --output-dir.

    --create-file-mode <mode>
	    (SFTP SCP FILE) When  curl is used  to create files remotely  using
	    one of the supported protocols, this option allows the user  to set
	    which 'mode' to set  on the file at  creation time, instead of  the
	    default 0644.

	    This   option   takes   an    octal   number   as   argument.    If
	    --create-file-mode is provided  several times, the  last set  value
	    is used.

	    Example:
	     curl --create-file-mode 0777 -T localfile sftp://example.com/new

	    Added in 7.75.0. See also --ftp-create-dirs.

    --crlf
	    (FTP SMTP) Convert line  feeds to carriage  return plus line  feeds
	    in upload.  Useful  for  MVS (OS/390).  Providing  --crlf  multiple
	    times has no extra effect. Disable it again with --no-crlf.

	    Example:
	     curl --crlf -T file ftp://example.com/

	    See also --use-ascii.

    --crlfile <file>
	    (TLS)  Provide  a  file  using   PEM  format  with  a   Certificate
	    Revocation List that may specify  peer certificates that are to  be
	    considered revoked.  If --crlfile  is provided  several times,  the
	    last set value is used.

	    Example:
	     curl --crlfile rejects.txt https://example.com

	    See also --cacert and --capath.

    --curves <list>
	    (TLS) Set specific curves to  use during SSL session  establishment
	    according to RFC 8422, 5.1. Multiple algorithms can be provided  by
	    separating them with  ":" (e.g. "X25519:P-521").  The parameter  is
	    available identically  in  the OpenSSL  "s_client"  and  "s_server"
	    utilities.

	    --curves allows  a OpenSSL  powered  curl to  make  SSL-connections
	    with exactly  the  (EC) curve  requested  by the  client,  avoiding
	    nontransparent client/server negotiations.

	    If this option is set,  the default curves list built into  OpenSSL
	    are ignored. If --curves  is provided several  times, the last  set
	    value is used.

	    Example:
	     curl --curves X25519 https://example.com

	    Added in 7.73.0. See also --ciphers.

    -d, --data <data>
	    (HTTP MQTT) Send the specified data  in a POST request to the  HTTP
	    server, in the same way that a browser does when a user  has filled
	    in an HTML form  and presses the  submit button. This option  makes
	    curl  pass  the   data  to  the   server  using  the   content-type
	    application/x-www-form-urlencoded. Compared to --form.

	    --data-raw  is  almost  the  same  but  does  not  have  a  special
	    interpretation of the @ character. To post data purely binary,  you
	    should instead  use the  --data-binary  option. To  URL-encode  the
	    value of a form field you may use --data-urlencode.

	    If any of these options is used more than once on the  same command
	    line, the  data  pieces  specified are  merged  with  a  separating
	    &-symbol.  Thus,  using  '-d  name=daniel  -d  skill=lousy'   would
	    generate a post chunk that looks like 'name=daniel&skill=lousy'.

	    If you  start the data  with the  letter @,  the rest  should be  a
	    filename to read the data from, or  - if you want curl to read  the
	    data from  stdin. Posting  data from  a file  named 'foobar'  would
	    thus be done with --data @foobar. When --data is told to  read from
	    a file like  that, carriage  returns, newlines and  null bytes  are
	    stripped out. If you do not want the @ character to have  a special
	    interpretation use --data-raw instead.

	    The data for  this option  is passed  on to the  server exactly  as
	    provided on  the command  line. curl  does not  convert, change  or
	    improve it.  It is  up  to the  user  to provide  the data  in  the
	    correct form. --data can be used several times in a command line

	    Examples:
	     curl -d "name=curl" https://example.com
	     curl -d "name=curl" -d "tool=cmdline" https://example.com
	     curl -d @filename https://example.com

	    This  option  is  mutually   exclusive  with  --form,  --head   and
	    --upload-file.  See   also  --data-binary,   --data-urlencode   and
	    --data-raw.

    --data-ascii <data>
	    (HTTP) This  option is  an alias  for --data.  --data-ascii can  be
	    used several times in a command line

	    Example:
	     curl --data-ascii @file https://example.com

	    See also --data-binary, --data-raw and --data-urlencode.

    --data-binary <data>
	    (HTTP) Post  data exactly  as specified  with no  extra  processing
	    whatsoever.

	    If you  start the data  with the  letter @,  the rest  should be  a
	    filename. "@-" makes curl read the data from stdin. Data  is posted
	    in a  similar  manner as  --data  does, except  that  newlines  and
	    carriage returns are preserved and conversions are never done.

	    Like  --data  the  default  content-type  sent  to  the  server  is
	    application/x-www-form-urlencoded. If  you  want  the  data  to  be
	    treated as  arbitrary  binary  data  by the  server  then  set  the
	    content-type      to      octet-stream:      -H      "Content-Type:
	    application/octet-stream".

	    If this option is used several times, the ones following  the first
	    append data  as  described in  --data.  --data-binary can  be  used
	    several times in a command line

	    Example:
	     curl --data-binary @filename https://example.com

	    See also --data-ascii.

    --data-raw <data>
	    (HTTP) Post  data  similarly  to --data  but  without  the  special
	    interpretation of the @ character.  --data-raw can be used  several
	    times in a command line

	    Examples:
	     curl --data-raw "hello" https://example.com
	     curl --data-raw "@at@at@" https://example.com

	    See also --data.

    --data-urlencode <data>
	    (HTTP) Post  data, similar  to the  other --data  options with  the
	    exception that this performs URL-encoding.

	    To be  CGI-compliant, the  <data>  part should  begin with  a  name
	    followed by a  separator and  a content  specification. The  <data>
	    part can be passed to curl using one of the following syntaxes:

	    content

		URL-encode the content  and pass  that on. Be  careful so  that
		the content does not  contain any "="  or "@" symbols, as  that
		makes the syntax match one of the other cases below.

	    =content

		URL-encode the  content and  pass that  on. The  preceding  "="
		symbol is not included in the data.

	    name=content

		URL-encode the content  part and  pass that on.  Note that  the
		name part is expected to be URL-encoded already.

	    @filename

		load  data  from  the  given  file  (including  any  newlines),
		URL-encode that data  and pass it  on in  the POST. Using  "@-"
		makes curl read the data from stdin.

	    name@filename

		load  data  from  the  given  file  (including  any  newlines),
		URL-encode that data and pass it on in the POST. The  name part
		gets    an     equal     sign    appended,     resulting     in
		name=urlencoded-file-content. Note  that the  name is  expected
		to be URL-encoded already.

	    --data-urlencode can be used several times in a command line

	    Examples:
	     curl --data-urlencode name=val https://example.com
	     curl --data-urlencode =encodethis https://example.com
	     curl --data-urlencode name@file https://example.com
	     curl --data-urlencode @fileonly https://example.com

	    See also --data and --data-raw.

    --delegation <LEVEL>
	    (GSS/kerberos) Set LEVEL what curl  is allowed to delegate when  it
	    comes to user credentials.

	    none

		Do not allow any delegation.

	    policy

		Delegates if and only if the OK-AS-DELEGATE flag is set  in the
		Kerberos service ticket, which is a matter of realm policy.

	    always

		Unconditionally allow the server to delegate.

	    If --delegation is provided  several times, the  last set value  is
	    used.

	    Example:
	     curl --delegation "none" https://example.com

	    See also --insecure and --ssl.

    --digest
	    (HTTP)  Enable  HTTP  Digest  authentication.  This  authentication
	    scheme avoids sending  the password  over the wire  in clear  text.
	    Use this  in  combination with  the  normal --user  option  to  set
	    username and  password. Providing  --digest multiple  times has  no
	    extra effect. Disable it again with --no-digest.

	    Example:
	     curl -u name:password --digest https://example.com

	    See also --user, --proxy-digest and --anyauth.

    -q, --disable
	    If used  as the first  parameter on  the command  line, the  curlrc
	    config file is not  read or used. See  the --config for details  on
	    the default config file  search path. Providing --disable  multiple
	    times has no extra effect. Disable it again with --no-disable.

	    Example:
	     curl -q https://example.com

	    See also --config.

    --disable-eprt
	    (FTP) Disable  the use of  the EPRT  and LPRT  commands when  doing
	    active FTP  transfers. curl  normally first  attempts to  use  EPRT
	    before using PORT, but with  this option, it uses PORT right  away.
	    EPRT is an  extension to the  original FTP  protocol, and does  not
	    work on all  servers, but  enables more functionality  in a  better
	    way than the traditional PORT command.

	    --eprt can be used  to explicitly enable  EPRT again and  --no-eprt
	    is an alias for --disable-eprt.

	    If the server is accessed using IPv6, this option has no  effect as
	    EPRT is necessary then.

	    Disabling EPRT only  changes the  active behavior. If  you want  to
	    switch to passive mode you need  to not use --ftp-port or force  it
	    with --ftp-pasv.  Providing --disable-eprt  multiple times  has  no
	    extra effect. Disable it again with --no-disable-eprt.

	    Example:
	     curl --disable-eprt ftp://example.com/

	    See also --disable-epsv and --ftp-port.

    --disable-epsv
	    (FTP) Disable the use  of the EPSV  command when doing passive  FTP
	    transfers. curl normally  first attempts to  use EPSV before  PASV,
	    but with this option, it does not try EPSV.

	    --epsv can be used  to explicitly enable  EPSV again and  --no-epsv
	    is an alias for --disable-epsv.

	    If the server is  an IPv6 host, this option  has no effect as  EPSV
	    is necessary then.

	    Disabling EPSV only changes  the passive behavior.  If you want  to
	    switch to  active  mode  you  need  to  use  --ftp-port.  Providing
	    --disable-epsv multiple  times  has  no extra  effect.  Disable  it
	    again with --no-disable-epsv.

	    Example:
	     curl --disable-epsv ftp://example.com/

	    See also --disable-eprt and --ftp-port.

    --disallow-username-in-url
	    Exit with error  if passed  a URL containing  a username.  Probably
	    most useful when the URL is being provided at runtime or similar.

	    Accepting and using credentials in  a URL is normally considered  a
	    security hazard  as  they are  easily  leaked that  way.  Providing
	    --disallow-username-in-url multiple  times  has  no  extra  effect.
	    Disable it again with --no-disallow-username-in-url.

	    Example:
	     curl --disallow-username-in-url https://example.com

	    See also --proto.

    --dns-interface <interface>
	    (DNS) Send outgoing DNS requests through the given interface.  This
	    option is  a  counterpart to  --interface  (which does  not  affect
	    DNS). The  supplied  string  must  be an  interface  name  (not  an
	    address). If --dns-interface  is provided several  times, the  last
	    set value is used.

	    Example:
	     curl --dns-interface eth0 https://example.com

	    For --dns-interface  to  work,  it  requires  that  the  underlying
	    libcurl is built  to support c-ares.  See also --dns-ipv4-addr  and
	    --dns-ipv6-addr.

    --dns-ipv4-addr <address>
	    (DNS) Bind to a specific IP address when making IPv4  DNS requests,
	    so that the DNS requests originate from this address. The  argument
	    should be a  single IPv4  address. If  --dns-ipv4-addr is  provided
	    several times, the last set value is used.

	    Example:
	     curl --dns-ipv4-addr 10.1.2.3 https://example.com

	    For --dns-ipv4-addr  to  work,  it  requires  that  the  underlying
	    libcurl is built  to support c-ares.  See also --dns-interface  and
	    --dns-ipv6-addr.

    --dns-ipv6-addr <address>
	    (DNS) Bind to a specific IP address when making IPv6  DNS requests,
	    so that the DNS requests originate from this address. The  argument
	    should be a  single IPv6  address. If  --dns-ipv6-addr is  provided
	    several times, the last set value is used.

	    Example:
	     curl --dns-ipv6-addr 2a04:4e42::561 https://example.com

	    For --dns-ipv6-addr  to  work,  it  requires  that  the  underlying
	    libcurl is built  to support c-ares.  See also --dns-interface  and
	    --dns-ipv4-addr.

    --dns-servers <addresses>
	    (DNS) Set the list of DNS servers to be used instead of  the system
	    default. The list of IP addresses should be separated with  commas.
	    Port numbers  may also  optionally  be given,  appended to  the  IP
	    address separated  with  a  colon.  If  --dns-servers  is  provided
	    several times, the last set value is used.

	    Examples:
	     curl --dns-servers 192.168.0.1,192.168.0.2 https://example.com
	     curl --dns-servers 10.0.0.1:53 https://example.com

	    For --dns-servers to work, it requires that the underlying  libcurl
	    is  built  to   support  c-ares.  See   also  --dns-interface   and
	    --dns-ipv4-addr.

    --doh-cert-status
	    (DNS) Same as --cert-status but used for DoH (DNS-over-HTTPS).

	    Verify the  status of  the DoH  servers' certificate  by using  the
	    Certificate Status Request (aka. OCSP stapling) TLS extension.

	    If this  option is  enabled and  the DoH  server  sends an  invalid
	    (e.g. expired) response, if the  response suggests that the  server
	    certificate has been revoked,  or no response  at all is  received,
	    the verification fails.

	    This support  is  currently only  implemented  in the  OpenSSL  and
	    GnuTLS backends. Providing --doh-cert-status multiple times has  no
	    extra effect. Disable it again with --no-doh-cert-status.

	    Example:
	     curl --doh-cert-status --doh-url https://doh.example \
		  https://example.com

	    Added in 7.76.0. See also --doh-insecure.

    --doh-insecure
	    (DNS) By default, every  connection curl makes  to a DoH server  is
	    verified to be secure before the transfer takes place. This  option
	    tells curl  to  skip  the verification  step  and  proceed  without
	    checking.

	    WARNING:  using  this  option  makes  the  DoH  transfer  and  name
	    resolution insecure.

	    This option is  equivalent to --insecure  and --proxy-insecure  but
	    used  for  DoH  (DNS-over-HTTPS)  only.  Providing   --doh-insecure
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-doh-insecure.

	    Example:
	     curl --doh-insecure --doh-url https://doh.example \
		  https://example.com

	    Added   in   7.76.0.   See    also   --doh-url,   --insecure    and
	    --proxy-insecure.

    --doh-url <URL>
	    (DNS) Specify which DNS-over-HTTPS (DoH)  server to use to  resolve
	    hostnames, instead of  using the default  name resolver  mechanism.
	    The URL must be HTTPS.

	    Some SSL options that you set  for your transfer also apply to  DoH
	    since the  name  lookups  take  place  over  SSL.  The  certificate
	    verification  settings  are  not   inherited  but  are   controlled
	    separately via --doh-insecure and --doh-cert-status.

	    By default, DoH is bypassed  when initially looking up DNS  records
	    of the DoH server.  You can specify the  IP address(es) of the  DoH
	    server with --resolve to avoid this.

	    This option is  unset if  an empty string  "" is used  as the  URL.
	    (Added in 7.85.0) If --doh-url is provided several times, the  last
	    set value is used.

	    Examples:
	     curl --doh-url https://doh.example https://example.com
	     curl --doh-url https://doh.example --resolve \
		  doh.example:443:192.0.2.1 https://example.com

	    See also --doh-insecure.

    --dump-ca-embed
	    (TLS) Write  the CA  bundle embedded  in curl  to standard  output,
	    then quit.

	    If curl  was  not built  with a  default  CA bundle  embedded,  the
	    output is empty.  Providing --dump-ca-embed multiple  times has  no
	    extra effect. Disable it again with --no-dump-ca-embed.

	    Example:
	     curl --dump-ca-embed

	    Added  in  8.10.0.  See   also  --ca-native,  --cacert,   --capath,
	    --proxy-ca-native, --proxy-cacert and --proxy-capath.

    -D, --dump-header <filename>
	    (HTTP FTP) Write  the received  protocol headers  to the  specified
	    file. If no headers  are received, the  use of this option  creates
	    an empty file. Specify "-" as filename (a single minus) to  have it
	    written to stdout.

	    Starting in curl  8.10.0, specify  "%" (a single  percent sign)  as
	    filename writes the output to stderr.

	    When used  in FTP,  the FTP  server response  lines are  considered
	    being "headers" and thus are saved there.

	    Starting in curl  8.11.0, using the  --create-dirs option can  also
	    create missing  directory  components  for  the  path  provided  in
	    --dump-header.

	    Having multiple transfers in one  set of operations (i.e. the  URLs
	    in one --next clause), appends them to the same file,  separated by
	    a blank line. If --dump-header is provided several times, the  last
	    set value is used.

	    Examples:
	     curl --dump-header store.txt https://example.com
	     curl --dump-header - https://example.com -o save

	    See also --output.

    --ech <config>
	    (HTTPS) Specify how to do ECH (Encrypted Client Hello).

	    The values allowed for <config> can be:

	    false

		Do not attempt ECH. The is the default.

	    grease

		Send a GREASE ECH extension

	    true

		Attempt ECH  if  possible,  but  do  not fail  if  ECH  is  not
		attempted. (The  connection  fails  if  ECH  is  attempted  but
		fails.)

	    hard

		Attempt ECH and fail  if that is  not possible. ECH only  works
		with TLS  1.3  and also  requires  using DoH  or  providing  an
		ECHConfigList on the command line.

	    ecl:<b64val>

		A base64 encoded ECHConfigList that is used for ECH.

	    pn:<name>

		A name  to  use to  over-ride  the "public_name"  field  of  an
		ECHConfigList (only available with OpenSSL TLS support)

	    Most ECH related  errors cause error  CURLE_ECH_REQUIRED (101).  If
	    --ech is provided several times, the last set value is used.

	    Example:
	     curl --ech true https://example.com

	    Added in 8.8.0. See also --doh-url.

    --egd-file <file>
	    (TLS) Deprecated option (added  in 7.84.0). Prior  to that it  only
	    had an effect on curl if built to use old versions of OpenSSL.

	    Specify the path name to  the Entropy Gathering Daemon socket.  The
	    socket is used to  seed the random  engine for SSL connections.  If
	    --egd-file is provided several times, the last set value is used.

	    Example:
	     curl --egd-file /random/here https://example.com

	    See also --random-file.

    --engine <name>
	    (TLS)  Select  the  OpenSSL  crypto   engine  to  use  for   cipher
	    operations. Use  "--engine  list" to  print  a list  of  build-time
	    supported engines. Note  that not  all (and possibly  none) of  the
	    engines may be available at runtime.

	    The OpenSSL concept  "engines" has been  superseded by  "providers"
	    in OpenSSL 3, and this option  should work fine to specify such  as
	    well. If --engine is provided several times, the last set  value is
	    used.

	    Example:
	     curl --engine flavor https://example.com

	    See also --ciphers and --curves.

    --etag-compare <file>
	    (HTTP) Make a conditional HTTP  request for the specific ETag  read
	    from the given file by sending a custom If-None-Match header  using
	    the stored ETag.

	    For correct results,  make sure  that the  specified file  contains
	    only a single line with  the desired ETag. A non-existing or  empty
	    file is treated as an empty ETag.

	    Use the option --etag-save to first save the ETag from  a response,
	    and then use  this option to  compare against the  saved ETag in  a
	    subsequent request.

	    Use this  option  with a  single  URL only.  If  --etag-compare  is
	    provided several times, the last set value is used.

	    Example:
	     curl --etag-compare etag.txt https://example.com

	    Added in 7.68.0. See also --etag-save and --time-cond.

    --etag-save <file>
	    (HTTP) Save  an HTTP  ETag  to the  specified file.  An ETag  is  a
	    caching related header,  usually returned in  a response. Use  this
	    option with a single URL only.

	    If no ETag is sent by the server, an empty file is created.

	    In many situations you want to use an existing etag in  the request
	    to avoid downloading the same resource again but also save  the new
	    etag  if  it  has  indeed  changed,  by  using  both  etag  options
	    --etag-save and --etag-compare with the same filename, in the  same
	    command line.

	    Starting in curl  8.12.0, using the  --create-dirs option can  also
	    create missing  directory  components  for  the  path  provided  in
	    --etag-save. If  --etag-save is  provided several  times, the  last
	    set value is used.

	    Example:
	     curl --etag-save storetag.txt https://example.com

	    Added in 7.68.0. See also --etag-compare.

    --expect100-timeout <seconds>
	    (HTTP) Maximum time in  seconds that you allow  curl to wait for  a
	    100-continue response  when  curl emits  an  Expects:  100-continue
	    header in  its request.  By  default curl  waits one  second.  This
	    option  accepts  decimal  values.  When  curl  stops  waiting,   it
	    continues as if a response was received.

	    The decimal  value  needs  to be  provided  using a  dot  (".")  as
	    decimal separator  - not  the local  version even  if  it might  be
	    using  another  separator.   If  --expect100-timeout  is   provided
	    several times, the last set value is used.

	    Example:
	     curl --expect100-timeout 2.5 -T file https://example.com

	    See also --connect-timeout.

    -f, --fail
	    (HTTP) Fail with error code 22 and with no response body  output at
	    all for  HTTP transfers  returning HTTP  response codes  at 400  or
	    greater.

	    In normal cases when  an HTTP server  fails to deliver a  document,
	    it returns a body  of text stating  so (which often also  describes
	    why and  more) and  a 4xx  HTTP response  code.  This command  line
	    option prevents curl from outputting that data and instead  returns
	    error 22 early. By  default, curl does  not consider HTTP  response
	    codes to indicate failure.

	    To  get both  the  error  code  and  also  save  the  content,  use
	    --fail-with-body instead.

	    This  method  is  not  fail-safe  and  there  are  occasions  where
	    non-successful  response  codes   slip  through,  especially   when
	    authentication is involved (response codes 401 and 407).  Providing
	    --fail multiple times has  no extra effect.  Disable it again  with
	    --no-fail.

	    Example:
	     curl --fail https://example.com

	    This option is mutually  exclusive with --fail-with-body. See  also
	    --fail-with-body and --fail-early.

    --fail-early
	    Fail and exit on the first detected transfer error.

	    When curl is used to do multiple transfers on the command  line, it
	    attempts to operate on each given  URL, one by one. By default,  it
	    ignores errors  if there are  more URLs  given and  the last  URL's
	    success determines the error code curl returns. Early failures  are
	    "hidden" by subsequent successful transfers.

	    Using this  option, curl  instead  returns an  error on  the  first
	    transfer that fails,  independent of  the amount of  URLs that  are
	    given on  the  command line.  This  way, no  transfer  failures  go
	    undetected by scripts and similar.

	    This option does not imply  --fail, which causes transfers to  fail
	    due to  the server's  HTTP status  code. You  can  combine the  two
	    options, however  note  --fail  is  not  global  and  is  therefore
	    contained by --next.

	    This option is global  and does not need  to be specified for  each
	    use of --next. Providing --fail-early  multiple times has no  extra
	    effect. Disable it again with --no-fail-early.

	    Example:
	     curl --fail-early https://example.com https://two.example

	    See also --fail and --fail-with-body.

    --fail-with-body
	    (HTTP) Return an  error on  server errors where  the HTTP  response
	    code is 400 or greater). In normal cases when an HTTP  server fails
	    to deliver  a document,  it  returns an  HTML document  stating  so
	    (which often also describes why and more). This option allows  curl
	    to output and save that content but also to return error 22.

	    This is an alternative option  to --fail which makes curl fail  for
	    the same circumstances  but without saving  the content.  Providing
	    --fail-with-body multiple  times has  no extra  effect. Disable  it
	    again with --no-fail-with-body.

	    Example:
	     curl --fail-with-body https://example.com

	    This option is  mutually exclusive  with --fail.  Added in  7.76.0.
	    See also --fail and --fail-early.

    --false-start
	    (TLS) No TLS backend currently supports this feature.

	    Use false start  during the TLS  handshake. False  start is a  mode
	    where  a  TLS  client   starts  sending  application  data   before
	    verifying the server's Finished message,  thus saving a round  trip
	    when performing a full handshake. Providing --false-start  multiple
	    times has no extra effect. Disable it again with --no-false-start.

	    Example:
	     curl --false-start https://example.com

	    See also --tcp-fastopen.

    --follow
	    (HTTP) Instructs  curl  to follow  HTTP  redirects and  to  do  the
	    custom request method set  with --request when following  redirects
	    as the HTTP specification says.

	    The  method  string  set  with  --request  is  used  in  subsequent
	    requests for the status codes 307  or 308, but may be reset to  GET
	    for 301, 302 and 303.

	    This is subtly  different than  --location, as  that option  always
	    set the custom  method in  all subsequent  requests independent  of
	    response code.

	    Restrict which  protocols a  redirect is  accepted to  follow  with
	    --proto-redir. Providing  --follow  multiple  times  has  no  extra
	    effect. Disable it again with --no-follow.

	    Example:
	     curl -X POST --follow https://example.com

	    Added in 8.16.0. See also --request, --location, --proto-redir  and
	    --max-redirs.

    -F, --form <name=content>
	    (HTTP SMTP IMAP) For the HTTP protocol family, emulate a  filled-in
	    form in  which a user  has pressed  the submit  button. This  makes
	    curl  POST   data   using  the   Content-Type   multipart/form-data
	    according to RFC 2388.

	    For SMTP  and  IMAP  protocols,  this  composes  a  multipart  mail
	    message to transmit.

	    This enables uploading of binary files etc. To force the  'content'
	    part to be a file, prefix the  filename with an @ sign. To get  the
	    content part from a  file, prefix the  filename with the symbol  <.
	    The difference between  @ and  < is then  that @ makes  a file  get
	    attached in the  post as a file  upload, while the  < makes a  text
	    field and gets the contents for that text field from a file.

	    Read content from stdin instead of a file by using a single  "-" as
	    filename. This  goes for both  @ and  < constructs.  When stdin  is
	    used,  the  contents  is  buffered  in  memory  first  by  curl  to
	    determine its size and allow  a possible resend. Defining a  part's
	    data from  a  named  non-regular file  (such  as a  named  pipe  or
	    similar) is  not  subject  to  buffering and  is  instead  read  at
	    transmission time;  since  the  full size  is  unknown  before  the
	    transfer starts, such data is  sent as chunks by HTTP and  rejected
	    by IMAP.

	    Example: send an image  to an HTTP  server, where 'profile' is  the
	    name of  the  form-field to  which  the file  portrait.jpg  is  the
	    input:

		curl -F profile=@portrait.jpg https://example.com/upload.cgi

	    Example: send your  name and shoe  size in two  text fields to  the
	    server:

		curl -F name=John -F shoesize=11 https://example.com/

	    Example: send your essay in a text field to the server. Send  it as
	    a plain text field, but get the contents for it from a local file:

		curl -F "story=<hugefile.txt" https://example.com/

	    You can  also  instruct curl  what  Content-Type to  use  by  using
	    "type=", in a manner similar to:

		curl -F "web=@index.html;type=text/html" example.com

	    or

		curl -F "name=daniel;type=text/foo" example.com

	    You can  also explicitly change  the name  field of  a file  upload
	    part by setting filename=, like this:

		curl -F "file=@localfile;filename=nameinpost" example.com

	    If  filename/path contains  ','  or  ';',  it  must  be  quoted  by
	    double-quotes like:

		curl -F "file=@\"local,file\";filename=\"name;in;post\"" \
		    https://example.com

	    or

		curl -F 'file=@"local,file";filename="name;in;post"' \
		    https://example.com

	    Note that  if  a  filename/path is  quoted  by  double-quotes,  any
	    double-quote or backslash  within the filename  must be escaped  by
	    backslash.

	    Quoting must  also  be applied  to  non-file data  if  it  contains
	    semicolons, leading/trailing spaces or leading double quotes:

		curl -F 'colors="red; green; blue";type=text/x-myapp' \
		   https://example.com

	    You can add custom headers to the field by setting headers=, like

		curl -F "submit=OK;headers=\"X-submit-type: OK\"" example.com

	    or

		curl -F "submit=OK;headers=@headerfile" example.com

	    The headers=  keyword may  appear more  than once  and above  notes
	    about quoting  apply. When  headers  are read  from a  file,  empty
	    lines and lines starting with  '#' are ignored; each header can  be
	    folded  by   splitting  between   two   words  and   starting   the
	    continuation line  with  a  space;  embedded  carriage-returns  and
	    trailing spaces are stripped. Here  is an example of a header  file
	    contents:

		# This file contains two headers.
		X-header-1: this is a header

		# The following header is folded.
		X-header-2: this is
		 another header

	    To support sending multipart mail messages, the syntax is  extended
	    as follows:

	    - name can  be omitted: the  equal sign is  the first character  of
	    the argument,

	    - if data starts with '(',  this signals to start a new  multipart:
	    it can be followed by a content type specification.

	    - a multipart can be terminated with a '=)' argument.

	    Example: the following command sends an SMTP mime email  consisting
	    in an inline part in two alternative formats: plain text  and HTML.
	    It attaches a text file:

		curl -F '=(;type=multipart/alternative' \
		     -F '=plain text message' \
		     -F '= <body>HTML message</body>;type=text/html' \
		     -F '=)' -F '=@textfile.txt' ... smtp://example.com

	    Data  can  be  encoded  for  transfer  using  encoder=.   Available
	    encodings are binary and 8bit that do nothing else than  adding the
	    corresponding  Content-Transfer-Encoding  header,  7bit  that  only
	    rejects 8-bit characters  with a  transfer error,  quoted-printable
	    and  base64  that  encodes  data  according  to  the  corresponding
	    schemes, limiting lines length to 76 characters.

	    Example: send multipart mail  with a quoted-printable text  message
	    and a base64 attached file:

		curl -F '=text message;encoder=quoted-printable' \
		     -F '=@localfile;encoder=base64' ... smtp://example.com

	    --form can be used several times in a command line

	    Example:
	     curl --form "name=curl" --form "file=@loadthis" \
		  https://example.com

	    This  option  is  mutually   exclusive  with  --data,  --head   and
	    --upload-file. See also --data, --form-string and --form-escape.

    --form-escape
	    (HTTP IMAP SMTP) Pass on  names of multipart form fields and  files
	    using   backslash-escaping   instead   of   percent-encoding.    If
	    --form-escape is  provided several  times, the  last set  value  is
	    used.

	    Example:
	     curl --form-escape -F 'field\name=curl' -F 'file=@load"this' \
		  https://example.com

	    Added in 7.81.0. See also --form.

    --form-string <name=string>
	    (HTTP SMTP IMAP)  Similar to  --form except that  the value  string
	    for  the named  parameter  is  used  literally.  Leading  @  and  <
	    characters, and the ";type="  string in the  value have no  special
	    meaning.  Use  this  in  preference  to  --form  if  there  is  any
	    possibility that the  string value may  accidentally trigger the  @
	    or < features of  --form. --form-string can  be used several  times
	    in a command line

	    Example:
	     curl --form-string "name=data" https://example.com

	    See also --form.

    --ftp-account <data>
	    (FTP) When an  FTP server  asks for "account  data" after  username
	    and password has  been provided, this  data is  sent off using  the
	    ACCT command. If --ftp-account is provided several times, the  last
	    set value is used.

	    Example:
	     curl --ftp-account "mr.robot" ftp://example.com/

	    See also --user.

    --ftp-alternative-to-user <command>
	    (FTP) If  authenticating with  the USER  and PASS  commands  fails,
	    send  this  command.   When  connecting   to  Tumbleweed's   Secure
	    Transport server over FTPS using a client certificate, using  "SITE
	    AUTH"  tells  the  server  to   retrieve  the  username  from   the
	    certificate.  If  --ftp-alternative-to-user  is  provided   several
	    times, the last set value is used.

	    Example:
	     curl --ftp-alternative-to-user "U53r" ftp://example.com

	    See also --ftp-account and --user.

    --ftp-create-dirs
	    (FTP SFTP) When an FTP or SFTP URL/operation uses a path  that does
	    not currently exist on  the server, the  standard behavior of  curl
	    is to  fail. Using  this option,  curl instead  attempts to  create
	    missing directories.  Providing  --ftp-create-dirs  multiple  times
	    has no extra effect. Disable it again with --no-ftp-create-dirs.

	    Example:
	     curl --ftp-create-dirs -T file ftp://example.com/remote/path/file

	    See also --create-dirs.

    --ftp-method <method>
	    (FTP) Control what  method curl should  use to reach  a file on  an
	    FTP(S) server. The method argument  should be one of the  following
	    alternatives:

	    multicwd

		Do a single CWD operation for each path part in the  given URL.
		For deep hierarchies this means many commands. This is how  RFC
		1738 says  it  should be  done. This  is  the default  but  the
		slowest behavior.

	    nocwd

		Do no CWD at all. curl does SIZE, RETR, STOR etc and  gives the
		full path to  the server for  each of  these commands. This  is
		the fastest behavior.

	    singlecwd

		Do one CWD with the  full target directory and then operate  on
		the file  "normally"  (like  in the  multicwd  case).  This  is
		somewhat more standards compliant than "nocwd" but without  the
		full penalty of "multicwd".

	    If --ftp-method is provided  several times, the  last set value  is
	    used.

	    Examples:
	     curl --ftp-method multicwd ftp://example.com/dir1/dir2/file
	     curl --ftp-method nocwd ftp://example.com/dir1/dir2/file
	     curl --ftp-method singlecwd ftp://example.com/dir1/dir2/file

	    See also --list-only.

    --ftp-pasv
	    (FTP) Use  passive mode  for the  data connection.  Passive is  the
	    internal default behavior,  but using  this option can  be used  to
	    override a previous --ftp-port option.

	    Reversing an enforced  passive really  is not doable  but you  must
	    then instead enforce the correct --ftp-port again.

	    Passive mode means that curl tries the EPSV command first  and then
	    PASV, unless --disable-epsv is used. Providing --ftp-pasv  multiple
	    times has no extra effect.

	    Example:
	     curl --ftp-pasv ftp://example.com/

	    This  option  is  mutually  exclusive  with  --ftp-port.  See  also
	    --disable-epsv.

    -P, --ftp-port <address>
	    (FTP) Reverse the default initiator/listener roles when  connecting
	    with FTP.  This  option  makes  curl use  active  mode.  curl  then
	    commands the  server  to connect  back  to the  client's  specified
	    address and port, while  passive mode asks  the server to setup  an
	    IP address and port for it  to connect to. <address> should be  one
	    of:

	    interface

		e.g. eth0 to specify which  interface's IP address you want  to
		use (Unix only)

	    IP address

		e.g. 192.168.10.1 to specify the exact IP address

	    hostname

		e.g. my.host.domain to specify the machine

	    -

		make curl pick  the same IP  address that  is already used  for
		the control connection. This is the recommended choice.

	    Disable the use  of PORT  with --ftp-pasv. Disable  the attempt  to
	    use the EPRT command instead of PORT by using --disable-eprt.  EPRT
	    is really PORT++.

	    You can also append ":[start]-[end]"  to the right of the  address,
	    to tell curl what TCP port  range to use. That means you specify  a
	    port range, from a lower to a higher number. A single  number works
	    as well, but do  note that it increases  the risk of failure  since
	    the port may not  be available. If  --ftp-port is provided  several
	    times, the last set value is used.

	    Examples:
	     curl -P - ftp:/example.com
	     curl -P eth0 ftp:/example.com
	     curl -P 192.168.0.2 ftp:/example.com

	    See also --ftp-pasv and --disable-eprt.

    --ftp-pret
	    (FTP) Send  a PRET  command  before PASV  (and EPSV).  Certain  FTP
	    servers, mainly  drftpd,  require  this  non-standard  command  for
	    directory listings  as  well as  up  and downloads  in  PASV  mode.
	    Providing --ftp-pret multiple  times has no  extra effect.  Disable
	    it again with --no-ftp-pret.

	    Example:
	     curl --ftp-pret ftp://example.com/

	    See also --ftp-port and --ftp-pasv.

    --ftp-skip-pasv-ip
	    (FTP) Do  not  use  the  IP  address the  server  suggests  in  its
	    response to  curl's  PASV  command  when  curl  connects  the  data
	    connection. Instead  curl reuses  the same  IP address  it  already
	    uses for the control connection.

	    This option is enabled by default (added in 7.74.0).

	    This option has no effect if PORT, EPRT or EPSV is used  instead of
	    PASV. Providing  --ftp-skip-pasv-ip  multiple times  has  no  extra
	    effect. Disable it again with --no-ftp-skip-pasv-ip.

	    Example:
	     curl --ftp-skip-pasv-ip ftp://example.com/

	    See also --ftp-pasv.

    --ftp-ssl-ccc
	    (FTP) Use CCC (Clear Command Channel) Shuts down the SSL/TLS  layer
	    after   authenticating.   The   rest   of   the   control   channel
	    communication is  unencrypted. This  allows NAT  routers to  follow
	    the  FTP  transaction.  The  default  mode  is  passive.  Providing
	    --ftp-ssl-ccc multiple times has no extra effect. Disable it  again
	    with --no-ftp-ssl-ccc.

	    Example:
	     curl --ftp-ssl-ccc ftps://example.com/

	    See also --ssl and --ftp-ssl-ccc-mode.

    --ftp-ssl-ccc-mode <active/passive>
	    (FTP) Set  the CCC mode.  The passive  mode does  not initiate  the
	    shutdown, but instead waits for the  server to do it, and does  not
	    reply to the shutdown  from the server.  The active mode  initiates
	    the shutdown  and waits  for  a reply  from the  server.  Providing
	    --ftp-ssl-ccc-mode multiple times has  no extra effect. Disable  it
	    again with --no-ftp-ssl-ccc-mode.

	    Example:
	     curl --ftp-ssl-ccc-mode active --ftp-ssl-ccc ftps://example.com/

	    See also --ftp-ssl-ccc.

    --ftp-ssl-control
	    (FTP) Require  SSL/TLS  for  the FTP  login,  clear  for  transfer.
	    Allows secure authentication, but non-encrypted data transfers  for
	    efficiency. Fails  the  transfer if  the  server does  not  support
	    SSL/TLS. Providing --ftp-ssl-control  multiple times  has no  extra
	    effect. Disable it again with --no-ftp-ssl-control.

	    Example:
	     curl --ftp-ssl-control ftp://example.com

	    See also --ssl.

    -G, --get
	    (HTTP) When  used,  this  option  makes  all  data  specified  with
	    --data, --data-binary or  --data-urlencode to  be used  in an  HTTP
	    GET request instead  of the  POST request that  otherwise would  be
	    used. curl appends the provided data to the URL as a query string.

	    If used  in  combination with  --head,  the POST  data  is  instead
	    appended to the URL with  a HEAD request. Providing --get  multiple
	    times has no extra effect. Disable it again with --no-get.

	    Examples:
	     curl --get https://example.com
	     curl --get -d "tool=curl" -d "age=old" https://example.com
	     curl --get -I -d "tool=curl" https://example.com

	    See also --data and --request.

    -g, --globoff
	    Switch off the  URL globbing  function. When you  set this  option,
	    you can specify URLs that  contain the letters {}[] without  having
	    curl itself interpret them. Note that these letters are not  normal
	    legal URL contents but they should be encoded according to  the URI
	    standard.

	    curl detects  numerical  IPv6  addresses  when  used  in  URLs  and
	    excludes them  from  the  treatment,  so they  can  still  be  used
	    without having to  disable globbing.  Providing --globoff  multiple
	    times has no extra effect. Disable it again with --no-globoff.

	    Example:
	     curl -g "https://example.com/{[]}}}}"

	    See also --config and --disable.

    --happy-eyeballs-timeout-ms <ms>
	    Set the timeout for Happy Eyeballs.

	    Happy Eyeballs is  an algorithm  that attempts to  connect to  both
	    IPv4 and  IPv6  addresses  for  dual-stack  hosts,  giving  IPv6  a
	    head-start of the  specified number  of milliseconds.  If the  IPv6
	    address cannot be connected to within that time, then a  connection
	    attempt  is made  to  the  IPv4  address  in  parallel.  The  first
	    connection to be established is the one that is used.

	    The range of  suggested useful  values is  limited. Happy  Eyeballs
	    RFC 6555 says "It is RECOMMENDED that connection attempts be  paced
	    150-250 ms apart  to balance human  factors against network  load."
	    libcurl currently defaults to 200 ms. Firefox and Chrome  currently
	    default to  300  ms.  If  --happy-eyeballs-timeout-ms  is  provided
	    several times, the last set value is used.

	    Example:
	     curl --happy-eyeballs-timeout-ms 500 https://example.com

	    See also --max-time and --connect-timeout.

    --haproxy-clientip <ip>
	    (HTTP) Set a client IP in  HAProxy PROXY protocol v1 header at  the
	    beginning of the connection.

	    For valid requests, IPv4  addresses must be  indicated as a  series
	    of exactly 4 integers  in the range  [0..255] inclusive written  in
	    decimal representation separated  by exactly one  dot between  each
	    other. Heading  zeroes are  not permitted  in front  of numbers  in
	    order to  avoid any  possible confusion  with octal  numbers.  IPv6
	    addresses must  be  indicated as  series  of 4  hexadecimal  digits
	    (upper or lower case) delimited by colons between each other,  with
	    the acceptance of one double colon sequence to replace the  largest
	    acceptable  range  of  consecutive  zeroes.  The  total  number  of
	    decoded bits must be exactly 128.

	    Otherwise, any string  can be accepted  for the  client IP and  get
	    sent.

	    It replaces  --haproxy-protocol if  used, it  is not  necessary  to
	    specify both  flags.  If  --haproxy-clientip  is  provided  several
	    times, the last set value is used.

	    Example:
	     curl --haproxy-clientip $IP

	    Added in 8.2.0. See also --proxy.

    --haproxy-protocol
	    (HTTP) Send a HAProxy PROXY protocol v1 header at the  beginning of
	    the connection. This  is used  by some load  balancers and  reverse
	    proxies to indicate the client's true IP address and port.

	    This option is  primarily useful  when sending test  requests to  a
	    service that  expects  this  header.  Providing  --haproxy-protocol
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-haproxy-protocol.

	    Example:
	     curl --haproxy-protocol https://example.com

	    See also --proxy.

    -I, --head
	    (HTTP FTP FILE)  Fetch the headers  only. HTTP-servers feature  the
	    command HEAD which  this uses to  get nothing but  the header of  a
	    document. When used on an FTP  or FILE URL, curl displays the  file
	    size and  last modification  time only.  Providing --head  multiple
	    times has no extra effect. Disable it again with --no-head.

	    Example:
	     curl -I https://example.com

	    See also --get, --verbose and --trace-ascii.

    -H, --header <header/@file>
	    (HTTP IMAP SMTP) Extra header to include in information sent.  When
	    used within an  HTTP request, it  is added  to the regular  request
	    headers.

	    For an IMAP or SMTP  MIME uploaded mail built with --form  options,
	    it  is  prepended  to  the  resulting  MIME  document,  effectively
	    including it  at the  mail global  level. It  does  not affect  raw
	    uploaded mails.

	    You may  specify any  number of  extra headers.  Note  that if  you
	    should add a  custom header that has  the same name  as one of  the
	    internal ones curl would  use, your externally  set header is  used
	    instead of the internal one. This allows you to make  even trickier
	    stuff  than  curl  would  normally  do.  You  should  not   replace
	    internally set headers without knowing perfectly well what you  are
	    doing. Remove an  internal header by  giving a replacement  without
	    content on the right side of  the colon, as in: -H "Host:". If  you
	    send the  custom  header with  no-value  then its  header  must  be
	    terminated with a semicolon, such as -H "X-Custom-Header;" to  send
	    "X-Custom-Header:".

	    curl makes sure that each  header you add/replace is sent with  the
	    proper end-of-line marker, you should  thus not add that as a  part
	    of the header  content: do  not add newlines  or carriage  returns,
	    they only  mess things  up for  you. curl  passes  on the  verbatim
	    string you give it  without any filter  or other safe guards.  That
	    includes white space and control characters.

	    This option can  take an  argument in @filename  style, which  then
	    adds a header for each line in the input file. Using @-  makes curl
	    read the header file from stdin.

	    Please note that  most anti-spam utilities  check the presence  and
	    value of  several  MIME mail  headers:  these are  "From:",  "To:",
	    "Date:" and "Subject:" among others  and should be added with  this
	    option.

	    You need  --proxy-header to  send custom  headers intended  for  an
	    HTTP proxy.

	    Passing on  a "Transfer-Encoding:  chunked"  header when  doing  an
	    HTTP request with a  request body, makes  curl send the data  using
	    chunked encoding.

	    WARNING: headers set with this option are set in all  HTTP requests
	    -  even  after  redirects  are   followed,  like  when  told   with
	    --location. This can lead to  the header being sent to other  hosts
	    than the original host,  so sensitive headers  should be used  with
	    caution combined with following redirects.

	    "Authorization:" and "Cookie:"  headers are  explicitly not  passed
	    on in  HTTP requests  when following  redirects to  other  origins,
	    unless --location-trusted  is used.  --header can  be used  several
	    times in a command line

	    Examples:
	     curl -H "X-First-Name: Joe" https://example.com
	     curl -H "User-Agent: yes-please/2000" https://example.com
	     curl -H "Host:" https://example.com
	     curl -H @headers.txt https://example.com

	    See also --user-agent, --referer and --proxy-header.

    -h, --help <subject>
	    Usage help.  Provide help  for  the subject  given as  an  optional
	    argument.

	    If no  argument  is  provided, curl  displays  the  most  important
	    command line arguments.

	    The argument can  either be a  category or  a command line  option.
	    When a category is  provided, curl shows  all command line  options
	    within the  given  category. Specify  category  "all" to  list  all
	    available options.

	    If "category"  is  specified,  curl  displays  all  available  help
	    categories.

	    If the  provided  subject  is  instead  an  existing  command  line
	    option, specified either in its  short form with a single dash  and
	    a single letter, or in the  long form with two dashes and a  longer
	    name, curl displays a help text for that option in the terminal.

	    The help output is extensive for some options.

	    If the provided command line option is not known, curl says so.

	    Examples:
	     curl --help all
	     curl --help --insecure
	     curl --help -f

	    See also --verbose.

    --hostpubmd5 <md5>
	    (SFTP SCP)  Pass a  string containing  32 hexadecimal  digits.  The
	    string should  be the 128  bit MD5  checksum of  the remote  host's
	    public key, curl refuses  the connection with  the host unless  the
	    checksums match.  If --hostpubmd5  is provided  several times,  the
	    last set value is used.

	    Example:
	     curl --hostpubmd5 e5c1c49020640a5ab0f2034854c321a8 \
		  sftp://example.com/

	    See also --hostpubsha256.

    --hostpubsha256 <sha256>
	    (SFTP SCP) Pass  a string containing  a Base64-encoded SHA256  hash
	    of the remote host's public  key. curl refuses the connection  with
	    the host unless the hashes match.

	    This feature requires  libcurl to  be built with  libssh2 and  does
	    not work with  other SSH backends.  If --hostpubsha256 is  provided
	    several times, the last set value is used.

	    Example:
	     curl --hostpubsha256 NDVkMTQxMGQ1ODdmMjQ3MjczYjAyOTY5MmRkMjVmNDQ=\
		   sftp://example.com/

	    Added in 7.80.0. See also --hostpubmd5.

    --hsts <filename>
	    (HTTPS) Enable HSTS for the transfer. If the filename points  to an
	    existing  HSTS  cache  file,  that  is  used.  After  a   completed
	    transfer, the cache is saved to  the filename again if it has  been
	    modified.

	    If curl is told to use HTTP:// for a transfer involving  a hostname
	    that exists  in the HSTS  cache, it  upgrades the  transfer to  use
	    HTTPS. Each  HSTS  cache entry  has  an individual  lifetime  after
	    which the upgrade is no longer performed.

	    Specify a ""  filename (zero  length) to  avoid loading/saving  and
	    make curl handle HSTS in memory.

	    You may want to restrict your  umask to prevent other users on  the
	    same system to access the created file.

	    If this option is used several times, curl loads contents  from all
	    the files but the last one  is used for saving. --hsts can be  used
	    several times in a command line

	    Example:
	     curl --hsts cache.txt https://example.com

	    Added in 7.74.0. See also --proto.

    --http0.9
	    (HTTP) Accept an HTTP version 0.9 response.

	    HTTP/0.9 is a response without  headers and therefore you can  also
	    connect with  this to  non-HTTP servers  and still  get a  response
	    since curl transparently downgrades - if allowed.

	    HTTP/0.9  is  disabled  by  default  (added  in  7.66.0)  Providing
	    --http0.9 multiple  times has  no extra  effect. Disable  it  again
	    with --no-http0.9.

	    Example:
	     curl --http0.9 https://example.com

	    See also --http1.1, --http2 and --http3.

    -0, --http1.0
	    (HTTP) Use  HTTP  version  1.0  instead  of  using  its  internally
	    preferred HTTP version. Providing  --http1.0 multiple times has  no
	    extra effect.

	    Example:
	     curl --http1.0 https://example.com

	    This  option  is  mutually   exclusive  with  --http1.1,   --http2,
	    --http2-prior-knowledge  and  --http3.   See  also  --http0.9   and
	    --http1.1.

    --http1.1
	    (HTTP) Use  HTTP version  1.1.  This is  the default  with  HTTP://
	    URLs. Providing --http1.1 multiple times has no extra effect.

	    Example:
	     curl --http1.1 https://example.com

	    This  option  is  mutually   exclusive  with  --http1.0,   --http2,
	    --http2-prior-knowledge  and  --http3.   See  also  --http1.0   and
	    --http0.9.

    --http2
	    (HTTP) Use HTTP/2.

	    For HTTPS, this means curl negotiates HTTP/2 in the TLS  handshake.
	    curl does this by default.

	    For HTTP,  this  means curl  attempts  to upgrade  the  request  to
	    HTTP/2 using the Upgrade: request header.

	    When curl uses HTTP/2 over HTTPS, it does not itself insist  on TLS
	    1.2 or higher even though that is required by the  specification. A
	    user can  add this  version requirement  with --tlsv1.2.  Providing
	    --http2 multiple times has no extra effect.

	    Example:
	     curl --http2 https://example.com

	    For --http2 to  work, it  requires that the  underlying libcurl  is
	    built to support  HTTP/2. This  option is  mutually exclusive  with
	    --http1.1,  --http1.0,  --http2-prior-knowledge  and  --http3.  See
	    also --http1.1, --http3, --no-alpn and --proxy-http2.

    --http2-prior-knowledge
	    (HTTP) Issue a non-TLS HTTP  request using HTTP/2 directly  without
	    HTTP/1.1 Upgrade.  It  requires  prior knowledge  that  the  server
	    supports HTTP/2 straight away. HTTPS  requests still do HTTP/2  the
	    standard  way  with  negotiated   protocol  versions  in  the   TLS
	    handshake.

	    Since 8.10.0 if this  option is set for  an HTTPS request then  the
	    application layer protocol version (ALPN) offered to the server  is
	    only HTTP/2. Prior to that  both HTTP/1.1 and HTTP/2 were  offered.
	    Providing  --http2-prior-knowledge  multiple  times  has  no  extra
	    effect. Disable it again with --no-http2-prior-knowledge.

	    Example:
	     curl --http2-prior-knowledge https://example.com

	    For  --http2-prior-knowledge  to   work,  it   requires  that   the
	    underlying libcurl  is  built to  support  HTTP/2. This  option  is
	    mutually exclusive with --http1.1, --http1.0, --http2 and  --http3.
	    See also --http2 and --http3.

    --http3
	    (HTTP) Attempt  HTTP/3 to  the host  in the  URL,  but fallback  to
	    earlier HTTP versions if the HTTP/3 connection establishment  fails
	    or is slow.  HTTP/3 is only  available for HTTPS  and not for  HTTP
	    URLs.

	    This option  allows a user  to avoid  using the  Alt-Svc method  of
	    upgrading to  HTTP/3  when you  know  or suspect  that  the  target
	    speaks HTTP/3 on the given host and port.

	    When asked to  use HTTP/3, curl  issues a  separate attempt to  use
	    older HTTP versions with a slight delay, so if the  HTTP/3 transfer
	    fails or is slow,  curl still tries to  proceed with an older  HTTP
	    version. The  fallback  performs the  regular  negotiation  between
	    HTTP/1 and HTTP/2.

	    Use --http3-only for similar functionality without a fallback.

	    curl cannot do  HTTP/3 over any  proxy. Providing --http3  multiple
	    times has no extra effect.

	    Example:
	     curl --http3 https://example.com

	    For --http3 to  work, it  requires that the  underlying libcurl  is
	    built to support  HTTP/3. This  option is  mutually exclusive  with
	    --http1.1,   --http1.0,   --http2,   --http2-prior-knowledge    and
	    --http3-only. Added in 7.66.0. See also --http1.1 and --http2.

    --http3-only
	    (HTTP) Instruct curl to use HTTP/3 to the host in the URL,  with no
	    fallback to  earlier HTTP  versions. HTTP/3  can only  be used  for
	    HTTPS and  not for HTTP  URLs. For  HTTP, this  option triggers  an
	    error.

	    This option  allows a user  to avoid  using the  Alt-Svc method  of
	    upgrading to HTTP/3 when you know that the target speaks  HTTP/3 on
	    the given host and port.

	    This  option makes  curl  fail  if  a  QUIC  connection  cannot  be
	    established, it does  not attempt  any other HTTP  versions on  its
	    own.  Use  --http3  for  similar  functionality  with  a  fallback.
	    Providing --http3-only multiple times has no extra effect.

	    Example:
	     curl --http3-only https://example.com

	    For --http3-only to work, it  requires that the underlying  libcurl
	    is built to support HTTP/3. This option is mutually exclusive  with
	    --http1.1,   --http1.0,   --http2,   --http2-prior-knowledge    and
	    --http3. Added in 7.88.0. See also --http1.1, --http2 and --http3.

    --ignore-content-length
	    (FTP HTTP)  For HTTP,  ignore the  Content-Length header.  This  is
	    particularly useful for servers  running Apache 1.x, which  reports
	    incorrect Content-Length for files larger than 2 gigabytes.

	    For FTP, this makes  curl skip the SIZE  command to figure out  the
	    size before downloading  a file. Providing  --ignore-content-length
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-ignore-content-length.

	    Example:
	     curl --ignore-content-length https://example.com

	    See also --ftp-skip-pasv-ip.

    -k, --insecure
	    (TLS SFTP SCP) By  default, every secure  connection curl makes  is
	    verified to be secure before the transfer takes place. This  option
	    makes  curl  skip  the   verification  step  and  proceed   without
	    checking.

	    When  this option  is  not  used  for  protocols  using  TLS,  curl
	    verifies the  server's TLS  certificate before  it continues:  that
	    the certificate contains the right name which matches the  hostname
	    used in the URL  and that the certificate has  been signed by a  CA
	    certificate present in  the cert  store. See  this online  resource
	    for further details: https://curl.se/docs/sslcerts.html

	    For SFTP  and SCP,  this  option makes  curl skip  the  known_hosts
	    verification. known_hosts is a file  normally stored in the  user's
	    home  directory  in   the  ".ssh"   subdirectory,  which   contains
	    hostnames and their public keys.

	    WARNING: using this option makes the transfer insecure.

	    When curl uses secure protocols it trusts responses and allows  for
	    example  HSTS  and  Alt-Svc  information  to  be  stored  and  used
	    subsequently. Using --insecure  can make  curl trust  and use  such
	    information from malicious  servers. Providing --insecure  multiple
	    times has no extra effect. Disable it again with --no-insecure.

	    Example:
	     curl --insecure https://example.com

	    See also --proxy-insecure, --cacert and --capath.

    --interface <name>
	    Perform the operation  using a specified  interface. You can  enter
	    interface name,  IP  address  or  hostname. If  you  prefer  to  be
	    specific, you can use the following special syntax:

	    if!<name>

		Interface  name.  If  the  provided  name  does  not  match  an
		existing interface, curl returns with error 45.

	    host!<name>

		IP address or hostname.

	    ifhost!<interface>!<host>

		Interface  name  and  IP  address  or  hostname.  This   syntax
		requires libcurl 8.9.0 or later.

		If the  provided name  does not  match an  existing  interface,
		curl returns with error 45.

	    curl does  not  support  using network  interface  names  for  this
	    option on Windows.

	    That name resolve operation if a hostname is provided does  not use
	    DNS-over-HTTPS even if --doh-url is set.

	    On Linux this option can be used to specify a VRF  (Virtual Routing
	    and Forwarding) device, but  the binary then  needs to either  have
	    the  CAP_NET_RAW  capability  set  or   to  be  run  as  root.   If
	    --interface is provided several times, the last set value is used.

	    Examples:
	     curl --interface eth0 https://example.com
	     curl --interface "host!10.0.0.1" https://example.com
	     curl --interface "if!enp3s0" https://example.com

	    See also --dns-interface.

    --ip-tos <string>
	    Set Type of Service (TOS) for IPv4 or Traffic Class for IPv6.

	    The values allowed for  <string> can be  a numeric value between  1
	    and 255 or one of the following:

	    CS0, CS1, CS2,  CS3, CS4, CS5,  CS6, CS7,  AF11, AF12, AF13,  AF21,
	    AF22, AF23, AF31,  AF32, AF33, AF41,  AF42, AF43, EF,  VOICE-ADMIT,
	    ECT1, ECT0,  CE, LE,  LOWCOST, LOWDELAY,  THROUGHPUT,  RELIABILITY,
	    MINCOST If --ip-tos is provided  several times, the last set  value
	    is used.

	    Example:
	     curl --ip-tos CS5 https://example.com

	    Added in 8.9.0. See also --tcp-nodelay and --vlan-priority.

    --ipfs-gateway <URL>
	    (IPFS) Specify which  gateway to use  for IPFS  and IPNS URLs.  Not
	    specifying this  instead  makes  curl  check  if  the  IPFS_GATEWAY
	    environment  variable  is  set,  or  if  a  "~/.ipfs/gateway"  file
	    holding the gateway URL exists.

	    If you run a local IPFS node, this gateway is by  default available
	    under "http://localhost:8080". A full example URL would look like:

		curl --ipfs-gateway http://localhost:8080 \
		   ipfs://bafybeigagd5nmnn2iys2f3

	    There  are   many   public   IPFS  gateways.   See   for   example:
	    https://ipfs.github.io/public-gateway-checker/

	    If you opt to  go for a  remote gateway you need  to be aware  that
	    you completely  trust the  gateway.  This might  be fine  in  local
	    gateways that you host yourself.  With remote gateways there  could
	    potentially be malicious  actors returning you  data that does  not
	    match the  request you  made, inspect  or even  interfere with  the
	    request. You  may not  notice this  when using  curl. A  mitigation
	    could be to go  for a "trustless"  gateway. This means you  locally
	    verify the data.  Consult the  docs page on  trusted vs  trustless:
	    https://docs.ipfs.tech/reference/http/gateway/#trusted-vs-trustless
	    If --ipfs-gateway is provided several times, the last set value  is
	    used.

	    Example:
	     curl --ipfs-gateway https://example.com ipfs://

	    Added in 8.4.0. See also --help and --manual.

    -4, --ipv4
	    Request only IPv4 addresses when  resolving hostnames, and not  for
	    example any  IPv6. Providing  --ipv4 multiple  times has  no  extra
	    effect.

	    Example:
	     curl --ipv4 https://example.com

	    This option is mutually exclusive  with --ipv6. See also  --http1.1
	    and --http2.

    -6, --ipv6
	    Request only IPv6 addresses when  resolving hostnames, and not  for
	    example any IPv4.

	    Your resolver may still respond to an IPv6-only resolve request  by
	    returning IPv6 addresses that  contain "mapped" IPv4 addresses  for
	    compatibility purposes.  macOS  is  known  to  do  this.  Providing
	    --ipv6 multiple times has no extra effect.

	    Example:
	     curl --ipv6 https://example.com

	    This option is mutually exclusive  with --ipv4. See also  --http1.1
	    and --http2.

    --json <data>
	    (HTTP) Send the specified JSON data  in a POST request to the  HTTP
	    server. --json  works as  a  shortcut for  passing on  these  three
	    options:

		--data-binary [arg]
		--header "Content-Type: application/json"
		--header "Accept: application/json"

	    There is no verification that the passed in data is actual  JSON or
	    that the syntax is correct.

	    If you  start the data  with the  letter @,  the rest  should be  a
	    filename to read the  data from, or a single  dash (-) if you  want
	    curl to read the  data from stdin. Posting  data from a file  named
	    'foobar' would  thus be  done with  --json @foobar  and to  instead
	    read the data from stdin, use --json @-.

	    If this option  is used more  than once on  the same command  line,
	    the additional data pieces are concatenated to the previous  before
	    sending.

	    The headers this  option sets  can be overridden  with --header  as
	    usual. --json can be used several times in a command line

	    Examples:
	     curl --json '{ "drink": "coffee" }' https://example.com
	     curl --json '{ "drink":' --json ' "coffee" }' https://example.com
	     curl --json @prepared https://example.com
	     curl --json @- https://example.com < json.txt

	    This  option  is  mutually   exclusive  with  --form,  --head   and
	    --upload-file.  Added  in  7.82.0.   See  also  --data-binary   and
	    --data-raw.

    -j, --junk-session-cookies
	    (HTTP) When curl is  told to read cookies  from a given file,  this
	    option makes  it discard  all session  cookies. This  has the  same
	    effect as if  a new  session is started.  Typical browsers  discard
	    session cookies when they are closed down.

	    Session cookies are  cookies without  a set expiry  time. They  are
	    meant    to    only    last    for    "a    session".     Providing
	    --junk-session-cookies multiple times has no extra effect.  Disable
	    it again with --no-junk-session-cookies.

	    Example:
	     curl --junk-session-cookies -b cookies.txt https://example.com

	    See also --cookie and --cookie-jar.

    --keepalive-cnt <integer>
	    Set the maximum number of keepalive probes TCP should send  but get
	    no response before dropping the connection. This option is  usually
	    used in conjunction with --keepalive-time.

	    This  option   is   supported   on   Linux,   *BSD/macOS,   Windows
	    >=10.0.16299, Solaris 11.4,  and recent AIX,  HP-UX and more.  This
	    option has no effect if --no-keepalive is used.

	    If unspecified, the  option defaults  to 9.  If --keepalive-cnt  is
	    provided several times, the last set value is used.

	    Example:
	     curl --keepalive-cnt 3 https://example.com

	    Added in 8.9.0. See also --keepalive-time and --no-keepalive.

    --keepalive-time <seconds>
	    Set the  time a  connection  needs to  remain idle  before  sending
	    keepalive probes and the time between individual keepalive  probes.
	    It  is  currently  effective  on  operating  systems  offering  the
	    "TCP_KEEPIDLE" and "TCP_KEEPINTVL"  socket options (meaning  Linux,
	    *BSD/macOS, Windows,  Solaris, and  recent  AIX, HP-UX  and  more).
	    Keepalive is used  by the TCP  stack to  detect broken networks  on
	    idle connections.  The number  of  missed keepalive  probes  before
	    declaring the connection  down is  OS dependent and  is commonly  8
	    (*BSD/macOS/AIX), 9 (Linux/AIX) or 5/10 (Windows), and this  number
	    can be changed by specifying the curl option "keepalive-cnt".  Note
	    that this option has no effect if --no-keepalive is used.

	    If  unspecified,   the   option   defaults  to   60   seconds.   If
	    --keepalive-time is provided several times,  the last set value  is
	    used.

	    Example:
	     curl --keepalive-time 20 https://example.com

	    See also --no-keepalive, --keepalive-cnt and --max-time.

    --key <key>
	    (TLS SCP SFTP)  Private key  filename. Allows you  to provide  your
	    private key in this separate file. For SSH, if not  specified, curl
	    tries  the   following   candidates  in   order:   "~/.ssh/id_rsa",
	    "~/.ssh/id_dsa", "./id_rsa", "./id_dsa".

	    If curl is built against OpenSSL library, and the engine  pkcs11 or
	    pkcs11 provider is available, then a PKCS#11 URI (RFC 7512)  can be
	    used to  specify  a private  key located  in  a PKCS#11  device.  A
	    string beginning with  "pkcs11:" is interpreted  as a PKCS#11  URI.
	    If a PKCS#11 URI  is provided, then the  --engine option is set  as
	    "pkcs11" if none was provided  and the --key-type option is set  as
	    "ENG"  or  "PROV"  if  none  was  provided  (depending  on  OpenSSL
	    version).

	    If curl is built against  Schannel then this option is ignored  for
	    TLS protocols (HTTPS,  etc). That backend  expects the private  key
	    to be already present  in the keychain  or PKCS#12 file  containing
	    the certificate. If --key is  provided several times, the last  set
	    value is used.

	    Example:
	     curl --cert certificate --key here https://example.com

	    See also --key-type and --cert.

    --key-type <type>
	    (TLS)  Private  key  file  type.  Specify  which  type  your  --key
	    provided private key is.  DER, PEM, and  ENG are supported. If  not
	    specified, PEM  is  assumed.  If  --key-type  is  provided  several
	    times, the last set value is used.

	    Example:
	     curl --key-type DER --key here https://example.com

	    See also --key.

    --knownhosts <file>
	    (SCP SFTP) When  doing SCP and  SFTP transfers, curl  automatically
	    checks a database  containing identification for  all hosts it  has
	    ever been used with to verify  that the host it connects to is  the
	    same as  previously. Host keys  are stored  in such  a known  hosts
	    file.  curl  uses  the   ~/.ssh/known_hosts  in  the  user's   home
	    directory by default.

	    This option lets a user specify  a specific file to check the  host
	    against.

	    The known hosts  check can  be disabled with  --insecure, but  that
	    makes  the  transfer  insecure  and  is  strongly  discouraged.  If
	    --knownhosts is  provided  several times,  the  last set  value  is
	    used.

	    Example:
	     curl --knownhosts filename --key here https://example.com

	    Added  in   8.17.0.   See   also   --hostpubsha256,   --hostpubmd5,
	    --insecure and --key.

    --krb <level>
	    (FTP) Deprecated  option  (added in  8.17.0).  It has  no  function
	    anymore.

	    Enable Kerberos authentication and use.  The level must be  entered
	    and  should  be   one  of  "clear",   "safe",  "confidential",   or
	    "private". Should  you  use  a level  that  is not  one  of  these,
	    "private" is used.  If --krb  is provided several  times, the  last
	    set value is used.

	    Example:
	     curl --krb clear ftp://example.com/

	    For --krb  to work,  it  requires that  the underlying  libcurl  is
	    built to support Kerberos. See also --delegation and --ssl.

    --libcurl <file>
	    Append this option to any  ordinary curl command line, and you  get
	    libcurl-using C  source code  written  to the  file that  does  the
	    equivalent of what your command-line operation does.

	    This option is global  and does not need  to be specified for  each
	    use of --next.  If --libcurl  is provided several  times, the  last
	    set value is used.

	    Example:
	     curl --libcurl client.c https://example.com

	    See also --verbose.

    --limit-rate <speed>
	    Specify the maximum transfer rate you  want curl to use - for  both
	    downloads and  uploads.  This  feature  is useful  if  you  have  a
	    limited pipe  and you  would like  your transfer  not  to use  your
	    entire bandwidth. To make it slower than it otherwise would be.

	    The given speed  is measured  in bytes/second, unless  a suffix  is
	    appended. Appending 'k' or 'K' counts the number as kilobytes,  'm'
	    or 'M' makes it megabytes etc. The supported suffixes (k, M,  G, T,
	    P) are 1024-based. For example  1k is 1024. Examples: 200K, 3m  and
	    1G.

	    The rate limiting logic  works on averaging  the transfer speed  to
	    no more than the set threshold over a period of multiple seconds.

	    If you  also  use  the  --speed-limit  option,  that  option  takes
	    precedence and might  cripple the rate-limiting  slightly, to  help
	    keep the speed-limit logic working.

	    Starting  in curl  8.19.0,  the  rate  can  be  specified  using  a
	    fraction as in "2.5M" for two  and a half megabytes per second.  It
	    only works with a period (".") delimiter, independent of what  your
	    locale might  prefer. If  --limit-rate is  provided several  times,
	    the last set value is used.

	    Examples:
	     curl --limit-rate 123.45K https://example.com
	     curl --limit-rate 1000 https://example.com
	     curl --limit-rate 10M https://example.com
	     curl --limit-rate 200K --max-time 60 https://example.com

	    See also --rate, --speed-limit and --speed-time.

    -l, --list-only
	    (FTP POP3  SFTP  FILE)  When  listing an  FTP  directory,  force  a
	    name-only view.  Maybe particularly  useful if  the user  wants  to
	    machine-parse the contents  of an  FTP directory  since the  normal
	    directory view does not  use a standard  look or format. When  used
	    like this, the  option causes  an NLST  command to be  sent to  the
	    server instead of LIST.

	    Note: Some FTP servers list  only files in their response to  NLST;
	    they do not include subdirectories and symbolic links.

	    When listing  an SFTP  directory, this  switch forces  a  name-only
	    view, one per line. This is especially useful if the user  wants to
	    machine-parse the contents  of an SFTP  directory since the  normal
	    directory view provides more information than filenames.

	    When retrieving a specific  email from POP3,  this switch forces  a
	    LIST command to be performed instead of RETR. This is  particularly
	    useful if the user wants to see if a specific message-id  exists on
	    the server and what size it is.

	    For FILE, this option has  no effect yet as directories are  always
	    listed in this mode.

	    Note: When  combined with  --request, this  option can  be used  to
	    send a  UIDL  command instead,  so the  user  may use  the  email's
	    unique identifier rather than its  message-id to make the  request.
	    Providing --list-only multiple times  has no extra effect.  Disable
	    it again with --no-list-only.

	    Example:
	     curl --list-only ftp://example.com/dir/

	    See also --quote and --request.

    --local-port <range>
	    Set a  preferred single  number or  range (FROM-TO)  of local  port
	    numbers to use  for the  connection(s). Note that  port numbers  by
	    nature are a  scarce resource  so setting this  range to  something
	    too narrow might  cause unnecessary connection  setup failures.  If
	    --local-port is  provided  several times,  the  last set  value  is
	    used.

	    Example:
	     curl --local-port 1000-3000 https://example.com

	    See also --globoff.

    -L, --location
	    (HTTP) If the server reports  that the requested page has moved  to
	    a different location (indicated with  a Location: header and a  3XX
	    response code), this option makes curl redo the request to  the new
	    place. If  used together  with  --show-headers or  --head,  headers
	    from all requested pages are shown.

	    When authentication  is used,  or when  sending a  cookie with  "-H
	    Cookie:", curl only sends its  credentials to the initial host.  If
	    a redirect takes  curl to  a different  host, it does  not get  the
	    credentials passed  on. See  --location-trusted  on how  to  change
	    this.

	    Limit the amount of redirects  to follow by using the  --max-redirs
	    option.

	    When curl  follows a  redirect and  if the  request is  a POST,  it
	    sends the following  request with a  GET if  the HTTP response  was
	    301, 302, or  303. If  the response  code was any  other 3xx  code,
	    curl resends  the  following  request  using  the  same  unmodified
	    method.

	    You can tell curl  to not change POST requests  to GET after a  30x
	    response by  using  the  dedicated  options  for  that:  --post301,
	    --post302 and --post303.

	    The method  set  with --request  overrides  the method  curl  would
	    otherwise select to use.

	    Restrict which  protocols a  redirect is  accepted to  follow  with
	    --proto-redir. Providing  --location multiple  times has  no  extra
	    effect. Disable it again with --no-location.

	    Example:
	     curl -L https://example.com

	    See  also   --resolve,  --alt-svc,   --follow,  --proto-redir   and
	    --max-redirs.

    --location-trusted
	    (HTTP) Instruct curl to follow HTTP redirects like --location,  but
	    permit curl to send  credentials and other  secrets along to  other
	    hosts than the initial one.

	    This may  or  may  not introduce  a  security breach  if  the  site
	    redirects you to a site to  which you send this sensitive data  to.
	    Another host means that  one or more  of hostname, protocol  scheme
	    or port number changed.

	    This option also allows  curl to pass  long cookies set  explicitly
	    with --header. Providing --location-trusted  multiple times has  no
	    extra effect. Disable it again with --no-location-trusted.

	    Examples:
	     curl --location-trusted -u user:password https://example.com
	     curl --location-trusted -H "Cookie: session=abc" \
		  https://example.com

	    See also --user and --follow.

    --login-options <options>
	    (IMAP LDAP  POP3 SMTP)  Specify  the login  options to  use  during
	    server authentication.

	    You can  use login  options to  specify protocol  specific  options
	    that may be used during authentication. At present only IMAP,  POP3
	    and SMTP support  login options. For  more information about  login
	    options  please  see  RFC  2384,  RFC  5092  and  the   IETF  draft
	    https://datatracker.ietf.org/doc/html/draft-earhart-url-smtp-00

	    Since 8.2.0,  IMAP supports  the login  option "AUTH=+LOGIN".  With
	    this option, curl uses  the plain (not  SASL) "LOGIN IMAP"  command
	    even if the server advertises  SASL authentication. Care should  be
	    taken in  using this option,  as it  sends your  password over  the
	    network in  plain  text. This  does not  work  if the  IMAP  server
	    disables the plain "LOGIN" (e.g. to prevent password snooping).  If
	    --login-options is provided  several times, the  last set value  is
	    used.

	    Example:
	     curl --login-options 'AUTH=*' imap://example.com

	    See also --user.

    --mail-auth <address>
	    (SMTP) Specify  a  single address.  This  is used  to  specify  the
	    authentication address (identity)  of a submitted  message that  is
	    being  relayed  to  another  server.  If  --mail-auth  is  provided
	    several times, the last set value is used.

	    Example:
	     curl --mail-auth user@example.com -T mail smtp://example.com/

	    See also --mail-rcpt and --mail-from.

    --mail-from <address>
	    (SMTP) Specify  a single  address that  the given  mail should  get
	    sent from. If --mail-from is  provided several times, the last  set
	    value is used.

	    Example:
	     curl --mail-from user@example.com -T mail smtp://example.com/

	    See also --mail-rcpt and --mail-auth.

    --mail-rcpt <address>
	    (SMTP) Specify a  single email  address, username  or mailing  list
	    name.  Repeat  this  option  several  times  to  send  to  multiple
	    recipients.

	    When  performing  an  address  verification  (VRFY  command),   the
	    recipient should  be  specified as  the  username or  username  and
	    domain (as per Section 3.5 of RFC 5321).

	    When  performing  a  mailing   list  expand  (EXPN  command),   the
	    recipient should be specified using the mailing list name, such  as
	    "Friends" or  "London-Office".  --mail-rcpt  can  be  used  several
	    times in a command line

	    Example:
	     curl --mail-rcpt user@example.net smtp://example.com

	    See also --mail-rcpt-allowfails.

    --mail-rcpt-allowfails
	    (SMTP) When sending  data to multiple  recipients, by default  curl
	    aborts SMTP conversation if at  least one of the recipients  causes
	    RCPT TO command to return an error.

	    The    default    behavior    can    be    changed    by    passing
	    --mail-rcpt-allowfails command-line option which makes curl  ignore
	    errors and proceed with the remaining valid recipients.

	    If all  recipients  trigger  RCPT  TO failures  and  this  flag  is
	    specified, curl still aborts the SMTP conversation and returns  the
	    error  received  from  to  the  last  RCPT  TO  command.  Providing
	    --mail-rcpt-allowfails multiple times has no extra effect.  Disable
	    it again with --no-mail-rcpt-allowfails.

	    Example:
	     curl --mail-rcpt-allowfails --mail-rcpt dest@example.com \
		  smtp://example.com

	    Added in 7.69.0. See also --mail-rcpt.

    -M, --manual
	    Manual. Display the huge help text.

	    Example:
	     curl --manual

	    See also --verbose, --libcurl and --trace.

    --max-filesize <bytes>
	    (FTP HTTP  MQTT) When set  to a  non-zero value,  it specifies  the
	    maximum size  (in  bytes)  of  a  file to  download.  If  the  file
	    requested is larger than  this value, the  transfer does not  start
	    and curl returns with exit code 63.

	    Setting the maximum value to zero disables the limit.

	    A unit suffix letter can be  used. Appending 'k' or 'K' counts  the
	    number as  kilobytes,  'm'  or  'M' makes  it  megabytes  etc.  The
	    supported suffixes (k, M, G, T, P) are 1024-based. Examples:  200K,
	    3m and 1G.

	    NOTE: before curl 8.4.0, when the  file size is not known prior  to
	    download, for  such files this  option has  no effect  even if  the
	    file transfer ends up being larger than this given limit.

	    Starting with curl  8.4.0, this  option aborts the  transfer if  it
	    reaches the threshold during transfer.

	    Starting in curl 8.19.0, the maximum size can be specified  using a
	    fraction as in "2.5M" for two  and a half megabytes. It only  works
	    with a  period (".")  delimiter, independent  of what  your  locale
	    might prefer.  If --max-filesize  is  provided several  times,  the
	    last set value is used.

	    Examples:
	     curl --max-filesize 100K https://example.com
	     curl --max-filesize 2.6M https://example.com

	    See also --limit-rate.

    --max-redirs <num>
	    (HTTP) Set  the  maximum number  of  redirections to  follow.  When
	    --location or --follow  are used,  this option  prevents curl  from
	    following too many  redirects. By default  the limit  is set to  50
	    redirects.  Set  this  option  to  -1  to  make  it  unlimited.  If
	    --max-redirs is  provided  several times,  the  last set  value  is
	    used.

	    Example:
	     curl --max-redirs 3 --location https://example.com

	    See also --location and --follow.

    -m, --max-time <seconds>
	    Set the maximum  time in seconds  that you  allow each transfer  to
	    take. Prevents your batch jobs  from hanging for hours due to  slow
	    networks or links going down. This option accepts decimal values.

	    If you  enable retrying  the transfer  (--retry) then  the  maximum
	    time counter is reset  each time the  transfer is retried. You  can
	    use --retry-max-time to limit the retry time.

	    The decimal value needs to be  provided using a dot (.) as  decimal
	    separator -  not  the  local version  even  if it  might  be  using
	    another separator.  If --max-time  is provided  several times,  the
	    last set value is used.

	    Examples:
	     curl --max-time 10 https://example.com
	     curl --max-time 2.92 https://example.com

	    See also --connect-timeout and --retry-max-time.

    --metalink
	    This option was  previously used  to specify  a Metalink  resource.
	    Metalink support is  disabled in curl  for security reasons  (added
	    in 7.78.0). If --metalink is  provided several times, the last  set
	    value is used.

	    Example:
	     curl --metalink file https://example.com

	    See also --parallel.

    --mptcp
	    Enable the use of Multipath  TCP (MPTCP) for connections. MPTCP  is
	    an extension to the standard  TCP that allows multiple TCP  streams
	    over  different  network   paths  between  the   same  source   and
	    destination. This can enhance bandwidth and improve reliability  by
	    using multiple paths simultaneously.

	    MPTCP is beneficial in networks where multiple paths exist  between
	    clients and servers,  such as  mobile networks where  a device  may
	    switch between WiFi  and cellular  data or in  wired networks  with
	    multiple Internet Service Providers.

	    This option  is currently  only supported  on Linux  starting  from
	    kernel 5.6. Only  TCP connections are  modified, hence this  option
	    does not affect HTTP/3 (QUIC) or UDP connections.

	    The server curl connects  to must also  support MPTCP. If not,  the
	    connection  seamlessly  falls  back   to  TCP.  Providing   --mptcp
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-mptcp.

	    Example:
	     curl --mptcp https://example.com

	    Added in 8.9.0. See also --tcp-fastopen.

    --negotiate
	    (HTTP) Enable Negotiate (SPNEGO) authentication.

	    This option requires a library built with GSS-API or SSPI  support.
	    Use --version to see if your curl supports GSS-API/SSPI or SPNEGO.

	    When using this option, you must also provide a fake  --user option
	    to activate the authentication code  properly. Sending a '-u :'  is
	    enough as the username and password from the --user option  are not
	    actually used. Providing  --negotiate multiple times  has no  extra
	    effect. Disable it again with --no-negotiate.

	    Example:
	     curl --negotiate -u : https://example.com

	    See also --basic, --ntlm, --anyauth and --proxy-negotiate.

    -n, --netrc
	    Make curl scan  the .netrc file  in the  user's home directory  for
	    login name and password.  This is typically  used for FTP on  Unix.
	    If used with HTTP, curl  enables user authentication. See  netrc(5)
	    and ftp(1) for details on  the file format. curl does not  complain
	    if that  file does not  have the  right permissions  (it should  be
	    neither  world-  nor  group-readable).  The  environment   variable
	    "HOME"  is  used  to  find  the  home  directory.  If  the  "NETRC"
	    environment variable is  set, that  filename is used  as the  netrc
	    file. (Added in 8.16.0)

	    If --netrc-file is used,  that overrides all  other ways to  figure
	    out the file.

	    The netrc file provides credentials  for a hostname independent  of
	    which protocol and port number that are used.

	    On Windows two filenames in the home directory are checked:  .netrc
	    and _netrc,  preferring  the  former.  Older  versions  on  Windows
	    checked for _netrc only.

	    A quick and simple example of  how to setup a .netrc to allow  curl
	    to FTP to the machine  host.example.com with username 'myself'  and
	    password 'secret' could look similar to:

		machine host.example.com
		login myself
		password secret

	    Providing --netrc multiple  times has no  extra effect. Disable  it
	    again with --no-netrc.

	    Example:
	     curl --netrc https://example.com

	    This  option   is   mutually  exclusive   with   --netrc-file   and
	    --netrc-optional. See also --netrc-file, --config and --user.

    --netrc-file <filename>
	    Set the  netrc file to  use. Similar  to --netrc,  except that  you
	    also provide the path (absolute or relative).

	    It abides  by --netrc-optional  if  specified. If  --netrc-file  is
	    provided several times, the last set value is used.

	    Example:
	     curl --netrc-file netrc https://example.com

	    This option is mutually exclusive  with --netrc. See also  --netrc,
	    --user and --config.

    --netrc-optional
	    Similar  to  --netrc,  but  this  option  makes  the  .netrc  usage
	    optional and not  mandatory as the  --netrc option does.  Providing
	    --netrc-optional multiple  times has  no extra  effect. Disable  it
	    again with --no-netrc-optional.

	    Example:
	     curl --netrc-optional https://example.com

	    This  option  is   mutually  exclusive  with   --netrc.  See   also
	    --netrc-file.

    -:, --next
	    Use a  separate  operation for  the  following URL  and  associated
	    options. This allows you  to send several  URL requests, each  with
	    their  own  specific  options,  for  example,  such  as   different
	    usernames or custom requests for each.

	    --next resets all  local options  and only global  ones have  their
	    values  survive  over  to   the  operation  following  the   --next
	    instruction.   Global   options    include   --verbose,    --trace,
	    --trace-ascii and --fail-early.

	    For example, you can do both a  GET and a POST in a single  command
	    line:

		curl www1.example.com --next -d postthis www2.example.com

	    --next can be used several times in a command line

	    Examples:
	     curl https://example.com --next -d postthis www2.example.com
	     curl -I https://example.com --next https://example.net/

	    See also --parallel and --config.

    --no-alpn
	    (HTTPS) Disable the ALPN TLS extension. ALPN is enabled by  default
	    if libcurl was built with  an SSL library that supports ALPN.  ALPN
	    is used  by a  libcurl  that supports  HTTP/2 to  negotiate  HTTP/2
	    support with the server during https sessions.

	    Note that this is the  negated option name documented. You can  use
	    --alpn to enable  ALPN. Providing --no-alpn  multiple times has  no
	    extra effect. Disable it again with --alpn.

	    Example:
	     curl --no-alpn https://example.com

	    For --no-alpn to work, it  requires that the underlying libcurl  is
	    built to support TLS. See also --no-npn and --http2.

    -N, --no-buffer
	    Disable  the  buffering  of  the  output  stream.  In  normal  work
	    situations, curl uses  a standard buffered  output stream that  has
	    the effect  that it  outputs the  data in  chunks, not  necessarily
	    exactly when  the data  arrives. Using  this option  disables  that
	    buffering.

	    Note that this is the  negated option name documented. You can  use
	    --buffer to enable buffering again. Providing --no-buffer  multiple
	    times has no extra effect. Disable it again with --buffer.

	    Example:
	     curl --no-buffer https://example.com

	    See also --progress-bar.

    --no-clobber
	    When used in conjunction  with the --output,  --remote-header-name,
	    --remote-name,   or   --remote-name-all   options,   curl    avoids
	    overwriting files that already exist.  Instead, a dot and a  number
	    gets appended to the name of the file that would be created,  up to
	    filename.100 after which it does not create any file.

	    Note that this is the negated option name documented. You  can thus
	    use   --clobber    to    enforce   the    clobbering,    even    if
	    --remote-header-name is specified.

	    The   --continue-at   option   cannot   be   used   together   with
	    --no-clobber. Providing --no-clobber  multiple times  has no  extra
	    effect. Disable it again with --clobber.

	    Example:
	     curl --no-clobber --output local/dir/file https://example.com

	    Added in 7.83.0. See also --output and --remote-name.

    --no-keepalive
	    Disable the use of keepalive  messages on the TCP connection.  curl
	    otherwise enables them by default.

	    Note that this is the negated option name documented. You  can thus
	    use --keepalive  to  enforce  keepalive.  Providing  --no-keepalive
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --keepalive.

	    Example:
	     curl --no-keepalive https://example.com

	    See also --keepalive-time and --keepalive-cnt.

    --no-npn
	    (HTTPS) curl never uses  NPN, this option  has no effect (added  in
	    7.86.0).

	    Disable the  NPN  TLS  extension.  NPN is  enabled  by  default  if
	    libcurl was built  with an SSL  library that  supports NPN. NPN  is
	    used by a libcurl that supports HTTP/2 to negotiate HTTP/2  support
	    with the server during https sessions. Providing --no-npn  multiple
	    times has no extra effect. Disable it again with --npn.

	    Example:
	     curl --no-npn https://example.com

	    For --no-npn to work,  it requires that  the underlying libcurl  is
	    built to support TLS. See also --no-alpn and --http2.

    --no-progress-meter
	    Option to switch off  the progress meter  output without muting  or
	    otherwise  affecting  warning   and  informational  messages   like
	    --silent does.

	    Note that this is the negated option name documented. You  can thus
	    use --progress-meter to enable the progress meter again.  Providing
	    --no-progress-meter multiple times has no extra effect. Disable  it
	    again with --progress-meter.

	    Example:
	     curl --no-progress-meter -o store https://example.com

	    Added in 7.67.0. See also --verbose and --silent.

    --no-sessionid
	    (TLS) Disable curl's use of SSL session-ID caching. By default  all
	    transfers are done using the cache. Note that while nothing  should
	    ever get hurt by  attempting to reuse  SSL session-IDs, there  seem
	    to be broken SSL implementations  in the wild that may require  you
	    to disable this in order for you to succeed.

	    Note that this is the negated option name documented. You  can thus
	    use  --sessionid   to   enforce   session-ID   caching.   Providing
	    --no-sessionid multiple  times  has  no extra  effect.  Disable  it
	    again with --sessionid.

	    Example:
	     curl --no-sessionid https://example.com

	    See also --insecure.

    --noproxy <no-proxy-list>
	    Comma-separated list of hosts for which not to use a proxy,  if one
	    is specified. The only  wildcard is a  single "*" character,  which
	    matches all hosts,  and effectively disables  the proxy. Each  name
	    in this  list is  matched as  either a  domain  which contains  the
	    hostname, or the  hostname itself. For  example, "local.com"  would
	    match "local.com",  "local.com:80",  and "www.local.com",  but  not
	    "www.notlocal.com".

	    This option overrides  the environment variables  that disable  the
	    proxy ("no_proxy"  and  "NO_PROXY").  If there  is  an  environment
	    variable disabling a proxy, you can set the no proxy list to  "" to
	    override it.

	    IP addresses specified to  this option can  be provided using  CIDR
	    notation (added in 7.86.0): an appended slash and number  specifies
	    the number  of  network bits  out  of the  address  to use  in  the
	    comparison. For example "192.168.0.0/16" would match all  addresses
	    starting with "192.168".  If --noproxy is  provided several  times,
	    the last set value is used.

	    Example:
	     curl --noproxy "www.example" https://example.com

	    See also --proxy.

    --ntlm
	    (HTTP) Use NTLM authentication. The NTLM authentication method  was
	    designed by  Microsoft and  is used  by IIS  web servers.  It is  a
	    proprietary  protocol,  reverse-engineered  by  clever  people  and
	    implemented in curl based on  their efforts. This kind of  behavior
	    should not  be endorsed,  you should  encourage everyone  who  uses
	    NTLM to switch  to a  public and  documented authentication  method
	    instead, such as Digest.

	    If you want to enable NTLM for your proxy authentication,  then use
	    --proxy-ntlm. Providing --ntlm multiple times has no extra  effect.
	    Disable it again with --no-ntlm.

	    Example:
	     curl --ntlm -u user:password https://example.com

	    For --ntlm  to work,  it requires  that the  underlying libcurl  is
	    built to support TLS. See also --proxy-ntlm.

    --ntlm-wb
	    (HTTP) Deprecated option (added in 8.8.0).

	    Enabled NTLM much  in the style  --ntlm does,  but handed over  the
	    authentication to  a separate  executable  that was  executed  when
	    needed. Providing --ntlm-wb multiple times has no extra effect.

	    Example:
	     curl --ntlm-wb -u user:password https://example.com

	    See also --ntlm and --proxy-ntlm.

    --oauth2-bearer <token>
	    (IMAP LDAP POP3 SMTP HTTP)  Specify the Bearer Token for OAUTH  2.0
	    server authentication.  The Bearer  Token  is used  in  conjunction
	    with the username which  can be specified as  part of the --url  or
	    --user options.

	    The Bearer Token and username are formatted according to RFC  6750.
	    If --oauth2-bearer is  provided several times,  the last set  value
	    is used.

	    Example:
	     curl --oauth2-bearer "mF_9.B5f-4.1JqM" https://example.com

	    See also --basic, --ntlm and --digest.

    --out-null
	    Discard all response  output of  a transfer silently.  This is  the
	    more efficient and portable version of

		curl https://host.example -o /dev/null

	    The transfer is  done in full,  all data  is received and  checked,
	    but the bytes  are not written  anywhere. --out-null is  associated
	    with a single URL.  Use it once per URL  when you use several  URLs
	    in a command line.

	    Example:
	     curl "https://example.com" --out-null

	    Added   in    8.16.0.    See    also    --output,    --remote-name,
	    --remote-name-all and --remote-header-name.

    -o, --output <file>
	    Write output to the given file instead of stdout. If you  are using
	    globbing to fetch multiple documents, you should quote the URL  and
	    you can  use  "#"  followed  by  a number  in  the  filename.  That
	    variable is  then replaced  with  the current  string for  the  URL
	    being fetched. Like in:

		curl "http://{one,two}.example.com" -o "file_#1.txt"

	    or use several variables like:

		curl "http://{site,host}.host[1-5].example" -o "#1_#2"

	    You may use  this option as many  times as the  number of URLs  you
	    have. For  example, if you  specify two  URLs on  the same  command
	    line, you can use it like this:

		curl -o aa example.com -o bb example.net

	    and the order of the -o options and the URLs does not  matter, only
	    that the first  -o is for  the first URL  and so  on, so the  above
	    command line can also be written as

		curl example.com example.net -o aa -o bb

	    See also the --create-dirs option  to create the local  directories
	    dynamically. Specifying the  output as '-'  (a single dash)  passes
	    the output to stdout.

	    To suppress response bodies, you can redirect output to /dev/null:

		curl example.com -o /dev/null

	    Or for Windows:

		curl example.com -o nul

	    Or, even more efficient and portable, use

		curl example.com --out-null

	    Specify the  filename  as  single  minus to  force  the  output  to
	    stdout, to  override  curl's  internal binary  output  in  terminal
	    prevention:

		curl https://example.com/jpeg -o -

	    Note that the  binary output may  be caused  by the response  being
	    compressed, in  which case  you may  want to  use the  --compressed
	    option. --output is associated with  a single URL. Use it once  per
	    URL when you use several URLs in a command line.

	    Examples:
	     curl -o file https://example.com
	     curl "http://{one,two}.example.com" -o "file_#1.txt"
	     curl "http://{site,host}.host[1-5].example" -o "#1_#2"
	     curl -o file https://example.com -o file2 https://example.net

	    See    also    --out-null,    --remote-name,     --remote-name-all,
	    --remote-header-name and --compressed.

    --output-dir <dir>
	    Specify the  directory  in  which  files  should  be  stored,  when
	    --remote-name or --output are used.

	    The given output directory is used for all URLs and  output options
	    on the command line, up until the first --next.

	    If the specified  target directory  does not  exist, the  operation
	    fails  unless  --create-dirs  is  also  used.  If  --output-dir  is
	    provided several times, the last set value is used.

	    Example:
	     curl --output-dir "tmp" -O https://example.com

	    Added in 7.73.0. See also --remote-name and --remote-header-name.

    -Z, --parallel
	    Make curl  perform all  transfers in  parallel as  compared to  the
	    regular serial manner.  Parallel transfer means  that curl runs  up
	    to N  concurrent transfers  simultaneously and  if there  are  more
	    than N  transfers  to  handle,  it starts  new  ones  when  earlier
	    transfers finish.

	    With parallel  transfers, the  progress meter  output is  different
	    from when doing serial transfers, as it then displays the  transfer
	    status for multiple transfers in a single line.

	    The  maximum   amount  of   concurrent   transfers  is   set   with
	    --parallel-max and it defaults to 50.

	    This option is global  and does not need  to be specified for  each
	    use of --next.  Providing --parallel  multiple times  has no  extra
	    effect. Disable it again with --no-parallel.

	    Example:
	     curl --parallel https://example.com -o file1 https://example.com \
		  -o file2

	    Added in  7.66.0. See  also --next,  --verbose, --parallel-max  and
	    --parallel-immediate.

    --parallel-immediate
	    When doing  parallel  transfers,  this  option  instructs  curl  to
	    prefer opening up more connections in parallel at once rather  than
	    waiting to  see  if  new  transfers can  be  added  as  multiplexed
	    streams on another connection.

	    By default, without this option set, curl prefers to wait  a little
	    and multiplex  new transfers  over existing  connections. It  keeps
	    the number of connections low at the expense of risking  a slightly
	    slower transfer startup.

	    This option is global  and does not need  to be specified for  each
	    use of --next.  Providing --parallel-immediate  multiple times  has
	    no extra effect. Disable it again with --no-parallel-immediate.

	    Example:
	     curl --parallel-immediate -Z https://example.com -o file1 \
		  https://example.com -o file2

	    Added in 7.68.0. See also --parallel and --parallel-max.

    --parallel-max <num>
	    When asked to do parallel transfers, using --parallel, this  option
	    controls the maximum amount of transfers to do simultaneously.

	    The default is 50. 65535 is the largest supported value.

	    This option is global  and does not need  to be specified for  each
	    use of --next.  If --parallel-max  is provided  several times,  the
	    last set value is used.

	    Example:
	     curl --parallel-max 100 -Z https://example.com ftp://example.com/

	    Added in 7.66.0. See also --parallel and --parallel-max-host.

    --parallel-max-host <num>
	    When asked to do parallel transfers, using --parallel, this  option
	    controls the  maximum  amount  of concurrent  connections  curl  is
	    allowed to  do  to  the same  protocol  + hostname  +  port  number
	    target.

	    The limit is  enforced by  libcurl and  queued "internally",  which
	    means that transfers that are  waiting for an available  connection
	    still look like started transfers in the progress meter.

	    The default  is  0  (unlimited). 65535  is  the  largest  supported
	    value.

	    This option is global  and does not need  to be specified for  each
	    use of --next.  If --parallel-max-host is  provided several  times,
	    the last set value is used.

	    Example:
	     curl --parallel-max-host 5 -Z https://example.com \
		  ftp://example.com/

	    Added in 8.16.0. See also --parallel and --parallel-max.

    --pass <phrase>
	    (TLS SCP SFTP) Passphrase for the private key used for SSH  or TLS.
	    If --pass is provided several times, the last set value is used.

	    Example:
	     curl --pass secret --key file https://example.com

	    See also --key and --user.

    --path-as-is
	    Do not  handle sequences  of /../  or /./  in the  given URL  path.
	    Normally curl squashes  or merges them  according to standards  but
	    with this  option  set  you  tell  it not  to  do  that.  Providing
	    --path-as-is multiple times has no  extra effect. Disable it  again
	    with --no-path-as-is.

	    Example:
	     curl --path-as-is https://example.com/../../etc/passwd

	    See also --request-target.

    --pinnedpubkey <hashes>
	    (TLS) Use the specified public  key file (or hashes) to verify  the
	    peer. This can be a path  to a file which contains a single  public
	    key in PEM or  DER format, or any  number of base64 encoded  sha256
	    hashes preceded by 'sha256//' and separated by ';'.

	    When negotiating  a  TLS or  SSL  connection, the  server  sends  a
	    certificate indicating  its identity.  A  public key  is  extracted
	    from this certificate and if  it does not exactly match the  public
	    key provided  to this  option, curl  aborts the  connection  before
	    sending or receiving any data.

	    This option is independent  of option --insecure.  If you use  both
	    options together then the peer is still verified by public key.

	    PEM/DER support:

	    OpenSSL and GnuTLS, wolfSSL, mbedTLS, Schannel

	    sha256 support:

	    OpenSSL, GnuTLS and wolfSSL, mbedTLS, Schannel

	    Other SSL  backends not  supported. If  --pinnedpubkey is  provided
	    several times, the last set value is used.

	    Examples:
	     curl --pinnedpubkey keyfile https://example.com
	     curl --pinnedpubkey 'sha256//ce118b51897f4452dc' \
		  https://example.com

	    See also --hostpubsha256.

    --post301
	    (HTTP) Respect  RFC 7231/6.4.2  and do  not convert  POST  requests
	    into GET  requests  when  following a  301  redirect.  The  non-RFC
	    behavior  is  ubiquitous  in  web   browsers,  so  curl  does   the
	    conversion  by  default  to  maintain  consistency.  A  server  may
	    require a  POST to remain  a POST  after such  a redirection.  This
	    option  is  meaningful  only   when  using  --location.   Providing
	    --post301 multiple  times has  no extra  effect. Disable  it  again
	    with --no-post301.

	    Example:
	     curl --post301 --location -d "data" https://example.com

	    See also --post302, --post303 and --location.

    --post302
	    (HTTP) Respect  RFC 7231/6.4.3  and do  not convert  POST  requests
	    into GET  requests  when  following a  302  redirect.  The  non-RFC
	    behavior  is  ubiquitous  in  web   browsers,  so  curl  does   the
	    conversion  by  default  to  maintain  consistency.  A  server  may
	    require a  POST to remain  a POST  after such  a redirection.  This
	    option  is  meaningful  only   when  using  --location.   Providing
	    --post302 multiple  times has  no extra  effect. Disable  it  again
	    with --no-post302.

	    Example:
	     curl --post302 --location -d "data" https://example.com

	    See also --post301, --post303 and --location.

    --post303
	    (HTTP) Violate  RFC 7231/6.4.4  and do  not convert  POST  requests
	    into GET  requests  when  following  303  redirect.  A  server  may
	    require a  POST to  remain a  POST after  a  303 redirection.  This
	    option  is  meaningful  only   when  using  --location.   Providing
	    --post303 multiple  times has  no extra  effect. Disable  it  again
	    with --no-post303.

	    Example:
	     curl --post303 --location -d "data" https://example.com

	    See also --post302, --post301 and --location.

    --preproxy <[protocol://]host[:port]>
	    Use the  specified SOCKS  proxy  before connecting  to an  HTTP  or
	    HTTPS --proxy.  In such a  case curl  first connects  to the  SOCKS
	    proxy and  then  connects (through  SOCKS)  to the  HTTP  or  HTTPS
	    proxy. Hence pre proxy.

	    The pre proxy string should be specified with a protocol://  prefix
	    to specify alternative proxy protocols. Use socks4://,  socks4a://,
	    socks5:// or socks5h://  to request the  specific SOCKS version  to
	    be used. No protocol specified makes curl default to SOCKS4.

	    If the port  number is  not specified  in the proxy  string, it  is
	    assumed to be 1080.

	    User and password that  might be provided  in the proxy string  are
	    URL decoded by curl. This allows you to pass in  special characters
	    such as @ by using %40 or  pass in a colon with %3a. If  --preproxy
	    is provided several times, the last set value is used.

	    Example:
	     curl --preproxy socks5://proxy.example -x http://http.example \
		  https://example.com

	    See also --proxy and --socks5.

    -#, --progress-bar
	    Make curl  display  transfer  progress as  a  simple  progress  bar
	    instead of the standard, more informational, meter.

	    This progress bar draws a single line of '#' characters  across the
	    screen and shows a  percentage if the  transfer size is known.  For
	    transfers without a known size, there is a space ship  (-=o=-) that
	    moves back  and forth  but only  while data  is being  transferred,
	    with a set of flying hash sign symbols on top.

	    This option is global  and does not need  to be specified for  each
	    use of  --next.  Providing  --progress-bar multiple  times  has  no
	    extra effect. Disable it again with --no-progress-bar.

	    Example:
	     curl -# -O https://example.com

	    See also --styled-output.

    --proto <protocols>
	    Limit  what  protocols  to  allow  for  transfers.  Protocols   are
	    evaluated left  to  right, are  comma  separated, and  are  each  a
	    protocol name  or  'all',  optionally  prefixed  by  zero  or  more
	    modifiers. Available modifiers are:

	    +

		Permit  this  protocol   in  addition   to  protocols   already
		permitted (this is the default if no modifier is used).

	    -

		Deny this  protocol, removing  it from  the list  of  protocols
		already permitted.

	    =

		Permit  only   this  protocol   (ignoring  the   list   already
		permitted), though subject to later modification by  subsequent
		entries in the comma separated list.

	    For  example:  --proto  -ftps  uses  the  default  protocols,   but
	    disables ftps

	    --proto -all,https,+http only enables http and https

	    --proto =http,https also only enables http and https

	    Unknown and  disabled  protocols  produce a  warning.  This  allows
	    scripts to  safely  rely  on  being  able  to  disable  potentially
	    dangerous  protocols,  without  relying   upon  support  for   that
	    protocol being built into curl to avoid an error.

	    This option can be  used multiple times,  in which case the  effect
	    is the same  as concatenating  the protocols into  one instance  of
	    the option.  If --proto  is provided  several times,  the last  set
	    value is used.

	    Example:
	     curl --proto =http,https,sftp https://example.com

	    See also --proto-redir and --proto-default.

    --proto-default <protocol>
	    Use protocol for any provided URL missing a scheme.

	    An    unknown    or     unsupported    protocol    causes     error
	    CURLE_UNSUPPORTED_PROTOCOL.

	    This option does not change the default proxy protocol (http).

	    Without this  option  set,  curl  guesses  protocol  based  on  the
	    hostname, see  --url for  details. If  --proto-default is  provided
	    several times, the last set value is used.

	    Example:
	     curl --proto-default https ftp.example.com

	    See also --proto and --proto-redir.

    --proto-redir <protocols>
	    Limit what protocols  to allow  on redirects.  Protocols denied  by
	    --proto are  not overridden  by this  option. See  --proto for  how
	    protocols are represented.

	    Example, allow only HTTP and HTTPS on redirect:

		curl --proto-redir -all,http,https --follow http://example.com

	    By default curl only allows HTTP, HTTPS, FTP and FTPS  on redirects
	    . Specifying all or +all enables all protocols on redirects,  which
	    is not  good for  security. If  --proto-redir is  provided  several
	    times, the last set value is used.

	    Example:
	     curl --proto-redir =http,https --follow https://example.com

	    See also --proto and --follow.

    -x, --proxy <[protocol://]host[:port]>
	    Use the specified proxy.

	    The proxy string  can be  specified with a  protocol:// prefix.  No
	    protocol specified or http:// it  is treated as an HTTP proxy.  Use
	    socks4://,  socks4a://,  socks5://  or  socks5h://  to  request   a
	    specific SOCKS version to be used.

	    Unix domain sockets  are supported for  socks proxy. Set  localhost
	    for the host part. e.g. socks5h://localhost/path/to/socket.sock

	    HTTPS proxy support  works with  the https://  protocol prefix  for
	    OpenSSL and GnuTLS.  It also  works for  mbedTLS, Rustls,  Schannel
	    and wolfSSL (added in 7.87.0).

	    Unrecognized  and  unsupported  proxy  protocol  schemes  cause  an
	    error.

	    If the port  number is  not specified  in the proxy  string, it  is
	    assumed to be 1080.

	    This option overrides existing  environment variables that set  the
	    proxy to use. If there is an environment variable setting  a proxy,
	    you can set proxy to "" to override it.

	    All  operations  that  are  performed   over  an  HTTP  proxy   are
	    transparently converted  to HTTP.  It means  that certain  protocol
	    specific operations might not  be available. This  is not the  case
	    if you can tunnel through the proxy, as one with  the --proxytunnel
	    option.

	    User and password that  might be provided  in the proxy string  are
	    URL decoded by curl. This allows you to pass in  special characters
	    such as @ by using %40 or pass in a colon with %3a.

	    The  proxy host  can  be  specified  the  same  way  as  the  proxy
	    environment variables, including the protocol prefix (http://)  and
	    the embedded user + password.

	    When a proxy is used, the  active FTP mode as set with  --ftp-port,
	    cannot be used.

	    Doing FTP over an  HTTP proxy without  --proxytunnel makes curl  do
	    HTTP with an  FTP URL over  the proxy.  For such transfers,  common
	    FTP  specific  options  do  not  work,  including  --ssl-reqd   and
	    --ftp-ssl-control. If --proxy is  provided several times, the  last
	    set value is used.

	    Example:
	     curl --proxy http://proxy.example https://example.com

	    See also --socks5 and --proxy-basic.

    --proxy-anyauth
	    Automatically  pick   a   suitable   authentication   method   when
	    communicating with the given HTTP proxy. This might cause an  extra
	    request/response round-trip.

	    Example:
	     curl --proxy-anyauth --proxy-user user:passwd -x proxy \
		  https://example.com

	    See also --proxy, --proxy-basic and --proxy-digest.

    --proxy-basic
	    Use HTTP  Basic authentication  when communicating  with the  given
	    proxy. Use  --basic for  enabling HTTP  Basic with  a remote  host.
	    Basic is the default authentication method curl uses with  proxies.
	    Providing  --proxy-basic  multiple  times  has  no  extra   effect.
	    Disable it again with --no-proxy-basic.

	    Example:
	     curl --proxy-basic --proxy-user user:passwd -x proxy \
		  https://example.com

	    See also --proxy, --proxy-anyauth and --proxy-digest.

    --proxy-ca-native
	    (TLS) Use the  operating system's native  CA store for  certificate
	    verification of the HTTPS proxy.

	    This option  is independent  of other  HTTPS proxy  CA  certificate
	    locations set  at  run time  or  build time.  Those  locations  are
	    searched in addition to the native CA store.

	    Equivalent to --ca-native  but used in  HTTPS proxy context.  Refer
	    to   --ca-native   for    TLS   backend   limitations.    Providing
	    --proxy-ca-native multiple times  has no extra  effect. Disable  it
	    again with --no-proxy-ca-native.

	    Example:
	     curl --proxy-ca-native https://example.com

	    Added  in  8.2.0.   See  also   --ca-native,  --cacert,   --capath,
	    --dump-ca-embed and --insecure.

    --proxy-cacert <file>
	    Use the specified certificate file  to verify the HTTPS proxy.  The
	    file may contain multiple CA certificates. The certificate(s)  must
	    be in PEM format.

	    This allows you to use a different trust for the proxy  compared to
	    the remote server connected to via the proxy.

	    Equivalent  to  --cacert  but  used  in  HTTPS  proxy  context.  If
	    --proxy-cacert is provided  several times,  the last  set value  is
	    used.

	    Example:
	     curl --proxy-cacert CA-file.txt -x https://proxy.example \
		  https://example.com

	    See also  --proxy-capath, --cacert,  --capath, --dump-ca-embed  and
	    --proxy.

    --proxy-capath <dir>
	    Same as --capath but used in HTTPS proxy context.

	    Use the  specified  certificate  directory  to  verify  the  proxy.
	    Multiple paths can be provided by separating them with colon  (":")
	    (e.g.  "path1:path2:path3").  The  certificates  must  be  in   PEM
	    format, and if curl  is built against  OpenSSL, the directory  must
	    have been  processed  using  the  c_rehash  utility  supplied  with
	    OpenSSL. Using  --proxy-capath can  allow OpenSSL-powered  curl  to
	    make   SSL-connections   much    more   efficiently   than    using
	    --proxy-cacert  if  the  --proxy-cacert   file  contains  many   CA
	    certificates.

	    If this  option is set,  the default  capath value  is ignored.  If
	    --proxy-capath is provided  several times,  the last  set value  is
	    used.

	    Example:
	     curl --proxy-capath /local/directory -x https://proxy.example \
		  https://example.com

	    See also --proxy-cacert, --proxy, --capath and --dump-ca-embed.

    --proxy-cert <cert[:passwd]>
	    Use the specified client  certificate file when communicating  with
	    an  HTTPS proxy.  The  certificate  must  be  PEM  format.  If  the
	    optional password  is  not specified,  it  is queried  for  on  the
	    terminal. Use --proxy-key to provide the private key.

	    This option is  the equivalent to  --cert but  used in HTTPS  proxy
	    context. If --proxy-cert  is provided several  times, the last  set
	    value is used.

	    Example:
	     curl --proxy-cert file -x https://proxy.example \
		  https://example.com

	    See also --proxy, --proxy-key and --proxy-cert-type.

    --proxy-cert-type <type>
	    Set type  of  the  provided client  certificate  when  using  HTTPS
	    proxy. PEM, DER, ENG, PROV and P12 are recognized types.

	    The default type  depends on the  TLS backend  and is usually  PEM.
	    For Schannel it is P12. If  --proxy-cert is a pkcs11: URI then  ENG
	    or PROV is the default type (depending on OpenSSL version).

	    Equivalent to  --cert-type  but used  in  HTTPS proxy  context.  If
	    --proxy-cert-type is provided several times, the last set value  is
	    used.

	    Example:
	     curl --proxy-cert-type PEM --proxy-cert file -x \
		  https://proxy.example https://example.com

	    See also --proxy-cert and --proxy-key.

    --proxy-ciphers <list>
	    (TLS) Same as --ciphers but used in HTTPS proxy context.

	    Specify which cipher suites to use in the connection to  your HTTPS
	    proxy when it negotiates  TLS 1.2 (1.1,  1.0). The list of  ciphers
	    suites must specify valid ciphers. Read up on cipher suite  details
	    on this URL:

	    https://curl.se/docs/ssl-ciphers.html   If    --proxy-ciphers    is
	    provided several times, the last set value is used.

	    Example:
	     curl --proxy-ciphers ECDHE-ECDSA-AES128-GCM-SHA256:\
		  ECDHE-RSA-AES128-GCM-SHA256 -x https://proxy.example \
		  https://example.com

	    See also --proxy-tls13-ciphers, --ciphers and --proxy.

    --proxy-crlfile <file>
	    Provide filename  for  a  PEM formatted  file  with  a  Certificate
	    Revocation  List  that   specifies  peer   certificates  that   are
	    considered revoked when communicating with an HTTPS proxy.

	    Equivalent to --crlfile but  only used in  HTTPS proxy context.  If
	    --proxy-crlfile is provided  several times, the  last set value  is
	    used.

	    Example:
	     curl --proxy-crlfile rejects.txt -x https://proxy.example \
		  https://example.com

	    See also --crlfile and --proxy.

    --proxy-digest
	    Use HTTP Digest  authentication when communicating  with the  given
	    proxy. Use --digest for  enabling HTTP Digest  with a remote  host.
	    Providing  --proxy-digest  multiple  times  has  no  extra  effect.
	    Disable it again with --no-proxy-digest.

	    Example:
	     curl --proxy-digest --proxy-user user:passwd -x proxy \
		  https://example.com

	    See also --proxy, --proxy-anyauth and --proxy-basic.

    --proxy-header <header/@file>
	    (HTTP) Extra header to include in the request when sending  HTTP to
	    a proxy. You may specify any  number of extra headers. This is  the
	    equivalent option to --header but  is for proxy communication  only
	    like in CONNECT requests  when you want  a separate header sent  to
	    the proxy to what is sent to the actual remote host.

	    curl makes sure that each  header you add/replace is sent with  the
	    proper end-of-line marker, you should  thus not add that as a  part
	    of the header  content: do  not add newlines  or carriage  returns,
	    they only mess things up for you.

	    Headers specified with  this option  are not  included in  requests
	    that curl knows are not to be sent to a proxy.

	    This option can  take an  argument in @filename  style, which  then
	    adds a header for each line in the input file. Using @-  makes curl
	    read the headers from stdin.

	    This option  can  be  used  multiple  times  to  add/replace/remove
	    multiple headers. --proxy-header  can be  used several  times in  a
	    command line

	    Examples:
	     curl --proxy-header "X-First-Name: Joe" -x http://proxy \
		  https://example.com
	     curl --proxy-header "User-Agent: surprise" -x http://proxy \
		  https://example.com
	     curl --proxy-header "Host:" -x http://proxy https://example.com

	    See also --proxy and --header.

    --proxy-http2
	    (HTTP) Negotiate HTTP/2 with an HTTPS proxy. The proxy might  still
	    only offer HTTP/1 and then curl sticks to using that version.

	    This has  no  effect for  any  other kinds  of  proxies.  Providing
	    --proxy-http2 multiple times has no extra effect. Disable it  again
	    with --no-proxy-http2.

	    Example:
	     curl --proxy-http2 -x proxy https://example.com

	    For --proxy-http2 to work, it requires that the underlying  libcurl
	    is built to support HTTP/2. Added in 8.1.0. See also --proxy.

    --proxy-insecure
	    Same as --insecure but used in HTTPS proxy context.

	    Every secure connection curl makes is verified to be secure  before
	    the  transfer  takes  place.  This  option  makes  curl  skip   the
	    verification step with a proxy and proceed without checking.

	    When this  option  is  not  used  for a  proxy  using  HTTPS,  curl
	    verifies the proxy's TLS certificate before it continues: that  the
	    certificate contains the right name which matches the hostname  and
	    that the certificate has  been signed by  a CA certificate  present
	    in the cert store.  See this online  resource for further  details:
	    https://curl.se/docs/sslcerts.html

	    WARNING:  using  this  option  makes  the  transfer  to  the  proxy
	    insecure. Providing --proxy-insecure  multiple times  has no  extra
	    effect. Disable it again with --no-proxy-insecure.

	    Example:
	     curl --proxy-insecure -x https://proxy.example \
		  https://example.com

	    See also --proxy and --insecure.

    --proxy-key <key>
	    Specify the  filename  for  your  private  key  when  using  client
	    certificates with your HTTPS proxy.  This option is the  equivalent
	    to --key  but  used  in  HTTPS proxy  context.  If  --proxy-key  is
	    provided several times, the last set value is used.

	    Example:
	     curl --proxy-key here -x https://proxy.example \
		  https://example.com

	    See also --proxy-key-type and --proxy.

    --proxy-key-type <type>
	    Specify  the  private  key  file  type  your  --proxy-key  provided
	    private  key  uses.  DER,  PEM,  and  ENG  are  supported.  If  not
	    specified, PEM is assumed.

	    Equivalent to  --key-type  but  used in  HTTPS  proxy  context.  If
	    --proxy-key-type is provided several times,  the last set value  is
	    used.

	    Example:
	     curl --proxy-key-type DER --proxy-key here -x \
		  https://proxy.example https://example.com

	    See also --proxy-key and --proxy.

    --proxy-negotiate
	    Use HTTP Negotiate (SPNEGO) authentication when communicating  with
	    the given  proxy.  Use  --negotiate  for  enabling  HTTP  Negotiate
	    (SPNEGO) with a remote  host. Providing --proxy-negotiate  multiple
	    times has no extra effect.

	    Example:
	     curl --proxy-negotiate --proxy-user user:passwd -x proxy \
		  https://example.com

	    See also --proxy-anyauth, --proxy-basic and --proxy-service-name.

    --proxy-ntlm
	    Use HTTP  NTLM authentication  when  communicating with  the  given
	    proxy. Use --ntlm for enabling  NTLM with a remote host.  Providing
	    --proxy-ntlm multiple times has no  extra effect. Disable it  again
	    with --no-proxy-ntlm.

	    Example:
	     curl --proxy-ntlm --proxy-user user:passwd -x http://proxy \
		  https://example.com

	    See also --proxy-negotiate, --proxy-anyauth and --proxy-user.

    --proxy-pass <phrase>
	    Passphrase for the private key for HTTPS proxy client certificate.

	    Equivalent  to  --pass  but  used   in  HTTPS  proxy  context.   If
	    --proxy-pass is  provided  several times,  the  last set  value  is
	    used.

	    Example:
	     curl --proxy-pass secret --proxy-key here -x \
		  https://proxy.example https://example.com

	    See also --proxy and --proxy-key.

    --proxy-pinnedpubkey <hashes>
	    (TLS) Use the specified public  key file (or hashes) to verify  the
	    proxy. This can be a path to a file which contains a  single public
	    key in PEM or  DER format, or any  number of base64 encoded  sha256
	    hashes preceded by 'sha256//' and separated by ';'.

	    When negotiating  a  TLS or  SSL  connection, the  server  sends  a
	    certificate indicating  its identity.  A  public key  is  extracted
	    from this certificate and if  it does not exactly match the  public
	    key provided  to this  option, curl  aborts the  connection  before
	    sending or receiving any data.

	    Before curl  8.10.0 this  option  did not  work due  to a  bug.  If
	    --proxy-pinnedpubkey is provided several times, the last set  value
	    is used.

	    Examples:
	     curl --proxy-pinnedpubkey keyfile https://example.com
	     curl --proxy-pinnedpubkey 'sha256//ce118b51897f4452dc' \
		  https://example.com

	    See also --pinnedpubkey and --proxy.

    --proxy-service-name <name>
	    Set the service  name for SPNEGO  when doing proxy  authentication.
	    If --proxy-service-name  is provided  several times,  the last  set
	    value is used.

	    Example:
	     curl --proxy-service-name "shrubbery" -x proxy \
		  https://example.com

	    See also --service-name, --proxy and --proxy-negotiate.

    --proxy-ssl-allow-beast
	    Do not work around a security flaw in the TLS1.0 protocol  known as
	    BEAST when communicating to an  HTTPS proxy. If this option is  not
	    used,  the  TLS   layer  may   use  workarounds   known  to   cause
	    interoperability problems with some older server implementations.

	    This option only changes how curl does TLS 1.0 with an  HTTPS proxy
	    and has no effect on later TLS versions.

	    WARNING: this option loosens  the TLS security,  and by using  this
	    flag you ask for exactly that.

	    Equivalent to --ssl-allow-beast  but used in  HTTPS proxy  context.
	    Providing  --proxy-ssl-allow-beast  multiple  times  has  no  extra
	    effect. Disable it again with --no-proxy-ssl-allow-beast.

	    Example:
	     curl --proxy-ssl-allow-beast -x https://proxy.example \
		  https://example.com

	    See also --ssl-allow-beast and --proxy.

    --proxy-ssl-auto-client-cert
	    Same as --ssl-auto-client-cert but used in HTTPS proxy context.

	    This    is     only     supported    by     Schannel.     Providing
	    --proxy-ssl-auto-client-cert multiple  times has  no extra  effect.
	    Disable it again with --no-proxy-ssl-auto-client-cert.

	    Example:
	     curl --proxy-ssl-auto-client-cert -x https://proxy.example \
		  https://example.com

	    Added in 7.77.0. See also --ssl-auto-client-cert and --proxy.

    --proxy-tls13-ciphers <list>
	    (TLS) Same as --tls13-ciphers but used in HTTPS proxy context.

	    Specify which cipher suites to use in the connection to  your HTTPS
	    proxy when it negotiates TLS  1.3. The list of ciphers suites  must
	    specify valid ciphers. Read up  on TLS 1.3 cipher suite details  on
	    this URL:

	    https://curl.se/docs/ssl-ciphers.html

	    This option is  used when  curl is  built to use  OpenSSL 1.1.1  or
	    later, Schannel, wolfSSL, or mbedTLS 3.6.0 or later.

	    Before curl 8.10.0 with mbedTLS  or wolfSSL, TLS 1.3 cipher  suites
	    were   set    by    using   the    --proxy-ciphers    option.    If
	    --proxy-tls13-ciphers is  provided  several  times,  the  last  set
	    value is used.

	    Example:
	     curl --proxy-tls13-ciphers TLS_AES_128_GCM_SHA256 -x proxy \
		  https://example.com

	    See also --proxy-ciphers, --tls13-ciphers and --proxy.

    --proxy-tlsauthtype <type>
	    Set TLS authentication  type with HTTPS  proxy. The only  supported
	    option is "SRP", for TLS-SRP (RFC 5054). This option works  only if
	    the underlying libcurl is built with TLS-SRP support.

	    Equivalent to --tlsauthtype  but used  in HTTPS  proxy context.  If
	    --proxy-tlsauthtype is provided several  times, the last set  value
	    is used.

	    Example:
	     curl --proxy-tlsauthtype SRP -x https://proxy.example \
		  https://example.com

	    See also --proxy, --proxy-tlsuser and --proxy-tlspassword.

    --proxy-tlspassword <string>
	    Set password to  use with the  TLS authentication method  specified
	    with --proxy-tlsauthtype  when  using HTTPS  proxy.  Requires  that
	    --proxy-tlsuser is set.

	    This option does not work with TLS 1.3.

	    Equivalent to --tlspassword  but used  in HTTPS  proxy context.  If
	    --proxy-tlspassword is provided several  times, the last set  value
	    is used.

	    Example:
	     curl --proxy-tlspassword passwd -x https://proxy.example \
		  https://example.com

	    See also --proxy and --proxy-tlsuser.

    --proxy-tlsuser <name>
	    Set username for use  for HTTPS proxy  with the TLS  authentication
	    method   specified   with   --proxy-tlsauthtype.   Requires    that
	    --proxy-tlspassword also is set.

	    This option  does not  work  with TLS  1.3. If  --proxy-tlsuser  is
	    provided several times, the last set value is used.

	    Example:
	     curl --proxy-tlsuser smith -x https://proxy.example \
		  https://example.com

	    See also --proxy and --proxy-tlspassword.

    --proxy-tlsv1
	    Use at least TLS version 1.x when negotiating with an  HTTPS proxy.
	    That means TLS version 1.0 or higher

	    Equivalent to --tlsv1  but for  an HTTPS  proxy context.  Providing
	    --proxy-tlsv1 multiple times has no extra effect.

	    Example:
	     curl --proxy-tlsv1 -x https://proxy.example https://example.com

	    See also --proxy.

    -U, --proxy-user <user:password>
	    Specify the username and password to use for proxy authentication.

	    If you  use  a  Windows  SSPI-enabled curl  binary  and  do  either
	    Negotiate or NTLM authentication then  you can tell curl to  select
	    the username and  password from  your environment  by specifying  a
	    single colon with this option: "-U :".

	    On systems where  it works,  curl hides the  given option  argument
	    from process listings.  This is not  enough to protect  credentials
	    from possibly getting  seen by other  users on  the same system  as
	    they still  are visible  for a  moment before  being cleared.  Such
	    sensitive data should be retrieved  from a file instead or  similar
	    and never used in clear text in a command line. If  --proxy-user is
	    provided several times, the last set value is used.

	    Example:
	     curl --proxy-user smith:secret -x proxy https://example.com

	    See also --proxy-pass.

    --proxy1.0 <host[:port]>
	    Use the  specified  HTTP  1.0 proxy.  If  the port  number  is  not
	    specified, it is assumed at port 1080.

	    The  only  difference  between  this  and  the  HTTP  proxy  option
	    --proxy,  is  that  attempts  to  use  CONNECT  through  the  proxy
	    specifies an HTTP  1.0 protocol  instead of the  default HTTP  1.1.
	    Providing --proxy1.0 multiple times has no extra effect.

	    Example:
	     curl --proxy1.0 http://proxy https://example.com

	    See also --proxy, --socks5 and --preproxy.

    -p, --proxytunnel
	    When an HTTP proxy is  used --proxy, this option makes curl  tunnel
	    the traffic through  the proxy.  The tunnel approach  is made  with
	    the HTTP proxy CONNECT request  and requires that the proxy  allows
	    direct connection to the  remote port number  curl wants to  tunnel
	    through to.

	    To suppress  proxy CONNECT  response headers  when curl  is set  to
	    output   headers    use    --suppress-connect-headers.    Providing
	    --proxytunnel multiple times has no extra effect. Disable it  again
	    with --no-proxytunnel.

	    Example:
	     curl --proxytunnel -x http://proxy https://example.com

	    See also --proxy.

    --pubkey <key>
	    (SFTP SCP) Public key filename.  Allows you to provide your  public
	    key in this separate file.

	    curl attempts  to automatically  extract the  public key  from  the
	    private  key  file,  so  passing  this  option  is  generally   not
	    required. Note that this public key extraction requires libcurl  to
	    be linked against a copy of libssh2 1.2.8 or higher that  is itself
	    linked against OpenSSL. If --pubkey is provided several times,  the
	    last set value is used.

	    Example:
	     curl --pubkey file.pub sftp://example.com/

	    See also --pass.

    -Q, --quote <command>
	    (FTP SFTP)  Send an arbitrary  command to  the remote  FTP or  SFTP
	    server. Quote commands  are sent  BEFORE the  transfer takes  place
	    (immediately after the initial PWD  command in an FTP transfer,  to
	    be  exact).  To  make  commands  take  place  after  a   successful
	    transfer, prefix them with a dash '-'.

	    (FTP only)  To make commands  be sent  after curl  has changed  the
	    working   directory,   immediately   before   the   file   transfer
	    command(s), prefix the command with a '+'.

	    You may specify any number of commands.

	    By default curl stops at first failure. To make curl  continue even
	    if the  command fails,  prefix the  command with  an asterisk  (*).
	    Otherwise, if the server returns  failure for one of the  commands,
	    the entire operation is aborted.

	    You must  send  syntactically  correct  FTP  commands  as  RFC  959
	    defines to  FTP servers, or  one of  the commands  listed below  to
	    SFTP servers.

	    SFTP is a  binary protocol.  Unlike for FTP,  curl interprets  SFTP
	    quote commands itself before sending them to the server.  Filenames
	    must  be   provided  within   double   quotes  to   embed   spaces,
	    backslashes, quotes  or double  quotes.  Within double  quotes  the
	    following escape sequences are available for that purpose: \\,  \",
	    and \'.

	    Following is the list of all supported SFTP quote commands:

	    atime date file

		The atime command sets the  last access time of the file  named
		by the file operand.  The date expression  can be all sorts  of
		date  strings,  see  the  curl_getdate(3)  man  page  for  date
		expression details. (Added in 7.73.0)

	    chgrp group file

		The chgrp command sets  the group ID of  the file named by  the
		file operand to the  group ID specified  by the group  operand.
		The group operand is a decimal integer group ID.

	    chmod mode file

		The chmod command modifies the file mode bits of the  specified
		file. The mode operand is an octal integer mode number.

	    chown user file

		The chown command sets the owner of the file named by  the file
		operand to the user ID specified by the user operand.  The user
		operand is a decimal integer user ID.

	    ln source_file target_file

		The ln  and symlink  commands  create a  symbolic link  at  the
		target_file location pointing to the source_file location.

	    mkdir directory_name

		The  mkdir  command   creates  the  directory   named  by   the
		directory_name operand.

	    mtime date file

		The mtime command sets the  last modification time of the  file
		named by  the file  operand.  The date  expression can  be  all
		sorts of date  strings, see  the curl_getdate(3)  man page  for
		date expression details. (Added in 7.73.0)

	    pwd

		The pwd command returns the  absolute path name of the  current
		working directory.

	    rename source target

		The rename command renames the  file or directory named by  the
		source operand  to the  destination path  named by  the  target
		operand.

	    rm file

		The rm command removes the file specified by the file operand.

	    rmdir directory

		The rmdir command removes the directory entry specified by  the
		directory operand, provided it is empty.

	    symlink source_file target_file

		See ln.

	    --quote can be used several times in a command line

	    Example:
	     curl --quote "DELE file" ftp://example.com/foo

	    See also --request.

    --random-file <file>
	    Deprecated option. This option is ignored (added in 7.84.0).  Prior
	    to that it only had an effect on curl if built to use  old versions
	    of OpenSSL.

	    Specify the path name to file containing random data. The  data may
	    be  used  to  seed  the  random  engine  for  SSL  connections.  If
	    --random-file is  provided several  times, the  last set  value  is
	    used.

	    Example:
	     curl --random-file rubbish https://example.com

	    See also --egd-file.

    -r, --range <range>
	    (HTTP  FTP SFTP  FILE)  Retrieve  a  byte  range  (i.e.  a  partial
	    document) from an  HTTP/1.1, FTP or  SFTP server  or a local  FILE.
	    Ranges can be specified in a number of ways.

	    0-499

		specifies the first 500 bytes

	    500-999

		specifies the second 500 bytes

	    -500

		specifies the last 500 bytes

	    9500-

		specifies the bytes from offset 9500 and forward

	    0-0,-1

		specifies the first and last byte only(*)(HTTP)

	    100-199,500-599

		specifies two separate 100-byte ranges(*) (HTTP)

	    (*) =  NOTE  that if  specifying  multiple ranges  and  the  server
	    supports it  then it  replies with  a multiple  part response  that
	    curl returns as-is.  It contains  meta information  in addition  to
	    the  requested  bytes.  Parsing  or  otherwise  transforming   this
	    response is the responsibility of the caller.

	    Only digit characters  (0-9) are  valid in the  'start' and  'stop'
	    fields of the 'start-stop' range  syntax. If a non-digit  character
	    is given  in  the  range, the  server's  response  is  unspecified,
	    depending on the server's configuration.

	    Many HTTP/1.1 servers  do not  have this feature  enabled, so  that
	    when you  attempt  to get  a range,  curl  instead gets  the  whole
	    document.

	    FTP and SFTP range downloads  only support the simple  'start-stop'
	    syntax (optionally  with  one  of the  numbers  omitted).  FTP  use
	    depends on the extended FTP command SIZE.

	    When  using this  option  for  HTTP  uploads  using  POST  or  PUT,
	    functionality is not guaranteed. The HTTP protocol has no  standard
	    interoperable resume  upload and  curl uses  a set  of headers  for
	    this purpose that  once proved  working for some  servers and  have
	    been left for those who find that useful.

	    This command line option is mutually exclusive with  --continue-at:
	    you can only use one of  them for a single transfer. If --range  is
	    provided several times, the last set value is used.

	    Example:
	     curl --range 22-44 https://example.com

	    See also --continue-at and --append.

    --rate <max request rate>
	    Specify the maximum transfer frequency  you allow curl to use -  in
	    number of transfer starts per  time unit (sometimes called  request
	    rate). Without this option, curl  starts the next transfer as  fast
	    as possible.

	    If given  several URLs  and a  transfer completes  faster than  the
	    allowed rate,  curl waits  until the  next transfer  is started  to
	    maintain the  requested  rate.  This  option  has  no  effect  when
	    --parallel is used.

	    The request rate is provided as "N/U" where N is an  integer number
	    and U  is  a  time unit.  Supported  units are  's'  (second),  'm'
	    (minute), 'h' (hour)  and 'd'  /(day, as  in a 24  hour unit).  The
	    default time unit, if no  "/U" is provided, is number of  transfers
	    per hour.

	    If curl is told to allow 10 requests per minute, it does  not start
	    the next request until  6 seconds have  elapsed since the  previous
	    transfer was started.

	    This  function  uses   millisecond  resolution.   If  the   allowed
	    frequency is  set  more  than  1000 per  second,  it  instead  runs
	    unrestricted.

	    When retrying transfers, enabled  with --retry, the separate  retry
	    delay logic is used and not this setting.

	    Starting in  version 8.10.0,  you can  specify the  number of  time
	    units  in the  rate  expression.  Make  curl  do  no  more  than  5
	    transfers per 15 seconds  with "5/15s" or  limit it to 3  transfers
	    per 4 hours with "3/4h". No spaces allowed.

	    This option is global  and does not need  to be specified for  each
	    use of --next. If  --rate is provided  several times, the last  set
	    value is used.

	    Examples:
	     curl --rate 2/s https://example.com ...
	     curl --rate 3/h https://example.com ...
	     curl --rate 14/m https://example.com ...

	    Added in 7.84.0. See also --limit-rate and --retry-delay.

    --raw
	    (HTTP) When  used,  it  disables  all  internal  HTTP  decoding  of
	    content or  transfer encodings  and instead  makes them  passed  on
	    unaltered,  raw.  Providing  --raw  multiple  times  has  no  extra
	    effect. Disable it again with --no-raw.

	    Example:
	     curl --raw https://example.com

	    See also --tr-encoding.

    -e, --referer <URL>
	    (HTTP) Set the referrer URL in  the HTTP request. This can also  be
	    set with the  --header flag  of course. When  used with  --location
	    you  can  append  ";auto""  to  the  --referer  URL  to  make  curl
	    automatically set  the previous  URL when  it follows  a  Location:
	    header. The ";auto" string  can be used alone,  even if you do  not
	    set an initial --referer. If  --referer is provided several  times,
	    the last set value is used.

	    Examples:
	     curl --referer "https://fake.example" https://example.com
	     curl --referer "https://fake.example;auto" -L https://example.com
	     curl --referer ";auto" -L https://example.com

	    See also --user-agent and --header.

    -J, --remote-header-name
	    (HTTP) Tell the  --remote-name option to  use the  server-specified
	    Content-Disposition filename instead of extracting a filename  from
	    the URL. If the server-provided  filename contains a path, that  is
	    stripped off before the filename is used.

	    The file is  saved in the  current directory,  or in the  directory
	    specified with --output-dir.

	    If the  server  specifies a  filename and  a  file with  that  name
	    already exists in the destination directory, it is not  overwritten
	    and an error occurs  - unless you allow  it by using the  --clobber
	    option. If the server does not specify a filename then  this option
	    has no effect.

	    There is no  attempt to  decode %-sequences (yet)  in the  provided
	    filename, so this  option may  provide you  with rather  unexpected
	    filenames.

	    This feature uses the name  from the "filename" field, it does  not
	    yet  support  the  "filename*"   field  (filenames  with   explicit
	    character sets).

	    Starting  in  8.19.0,  curl  falls  back  and  uses  the   filename
	    extracted    from    the    last    redirect    header    if     no
	    "Content-Disposition:" header provides a filename.

	    WARNING: Exercise  judicious  use  of this  option,  especially  on
	    Windows. A rogue server could send  you the name of a DLL or  other
	    file that could be  loaded automatically by  Windows or some  third
	    party software. Providing  --remote-header-name multiple times  has
	    no extra effect. Disable it again with --no-remote-header-name.

	    Example:
	     curl -OJ https://example.com/file

	    See also --remote-name.

    -O, --remote-name
	    Write output to  a local file  named like the  remote file we  get.
	    (Only the file  part of the remote  file is used,  the path is  cut
	    off.)

	    The file is  saved in the  current working  directory. If you  want
	    the file saved in a  different directory, make sure you change  the
	    current working directory before invoking curl with this option  or
	    use --output-dir.

	    The remote filename to use  for saving is extracted from the  given
	    URL, nothing else, and if  it already exists it is overwritten.  If
	    you want the  server to  be able  to choose the  filename refer  to
	    --remote-header-name which can be used in addition to this  option.
	    If the server chooses  a filename and  that name already exists  it
	    is not overwritten.

	    There is no  URL decoding done on  the filename. If  it has %20  or
	    other  URL encoded  parts  of  the  name,  they  end  up  as-is  as
	    filename.

	    You may use  this option as many  times as the  number of URLs  you
	    have.

	    Before curl 8.10.0, curl returned an error if the URL ended  with a
	    slash, which  means that  there is  no filename  part  in the  URL.
	    Starting in 8.10.0, curl  sets the filename  to the last  directory
	    part of  the URL  or if  that also  is  missing to  "curl_response"
	    (without  extension)   for   this   situation.   --remote-name   is
	    associated with a  single URL.  Use it  once per URL  when you  use
	    several URLs in a command line.

	    Examples:
	     curl -O https://example.com/filename
	     curl -O https://example.com/filename -O https://example.com/file2

	    See also --remote-name-all, --output-dir and --remote-header-name.

    --remote-name-all
	    Change the default action  for all given URLs  to be dealt with  as
	    if --remote-name were  used for each  one. If  you want to  disable
	    that for a specific URL after --remote-name-all has been used,  you
	    must use "-o  -" or  --no-remote-name. Providing  --remote-name-all
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-remote-name-all.

	    Example:
	     curl --remote-name-all ftp://example.com/file1 \
		  ftp://example.com/file2

	    See also --remote-name.

    -R, --remote-time
	    Make curl attempt to  figure out the  timestamp of the remote  file
	    that is  getting downloaded,  and  if that  is available  make  the
	    local  file  get  that  same  timestamp.  Providing   --remote-time
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-remote-time.

	    Example:
	     curl --remote-time -o foo https://example.com

	    See also --remote-name and --time-cond.

    --remove-on-error
	    Remove the  output file  if an  error occurs.  If  curl returns  an
	    error when told to save output in a local file. This  prevents curl
	    from leaving  a  partial  file  in  the case  of  an  error  during
	    transfer.

	    If the output is not a regular file, this option has no effect.

	    The   --continue-at   option   cannot   be   used   together   with
	    --remove-on-error. Providing --remove-on-error  multiple times  has
	    no extra effect. Disable it again with --no-remove-on-error.

	    Example:
	     curl --remove-on-error -o output https://example.com

	    Added in 7.83.0. See also --fail.

    -X, --request <method>
	    Change the method to use when starting the transfer.

	    curl passes  on the  verbatim string  you give  it  in the  request
	    without any filter or other safe guards. That includes white  space
	    and control characters.

	    HTTP

		Specifies a  custom request  method to  use when  communicating
		with the  HTTP server.  The specified  request method  is  used
		instead of the method otherwise  used (which defaults to  GET).
		Read the HTTP 1.1  specification for details and  explanations.
		Common additional HTTP requests  include PUT and DELETE,  while
		related technologies like  WebDAV offers  PROPFIND, COPY,  MOVE
		and more.

		Normally you do not need  this option. All sorts of GET,  HEAD,
		POST and PUT  requests are  rather invoked  by using  dedicated
		command line options.

		This option  only changes  the  actual word  used in  the  HTTP
		request, it does not  alter the way  curl behaves. For  example
		if you want to make a  proper HEAD request, using -X HEAD  does
		not suffice. You need to use the --head option.

		If  --location  is  used,  the  method  string  you  set   with
		--request is used for all requests, which may cause  unintended
		side-effects  when  curl   does  not   change  request   method
		according to  the  HTTP  30x  response  codes  -  and  similar.
		Consider using --follow instead in combination with --request.

	    FTP

		Specifies a  custom FTP  command to  use instead  of LIST  when
		doing file lists with FTP.

	    POP3

		Specifies a  custom POP3  command  to use  instead of  LIST  or
		RETR.

	    IMAP

		Specifies a custom IMAP command to use instead of LIST.

	    SMTP

		Specifies a  custom SMTP  command  to use  instead of  HELP  or
		VRFY.

	    If --request  is provided  several  times, the  last set  value  is
	    used.

	    Examples:
	     curl --request "DELETE" https://example.com
	     curl -X NLST ftp://example.com/

	    See also --request-target and --follow.

    --request-target <path>
	    (HTTP) Use an alternative target  (path) instead of using the  path
	    as provided in the URL.  Particularly useful when wanting to  issue
	    HTTP requests without  leading slash  or other data  that does  not
	    follow the regular URL pattern, like "OPTIONS *".

	    curl passes  on the  verbatim string  you give  it  in the  request
	    without any filter or other safe guards. That includes white  space
	    and control  characters. If  --request-target is  provided  several
	    times, the last set value is used.

	    Example:
	     curl --request-target "*" -X OPTIONS https://example.com

	    See also --request.

    --resolve <[+]host:port:addr[,addr]...>
	    Provide a custom address for  a specific host and port pair.  Using
	    this, you can  make the  curl requests(s) use  a specified  address
	    and prevent the  otherwise normally  resolved address  to be  used.
	    Consider it  a  sort  of /etc/hosts  alternative  provided  on  the
	    command line. The  port number should  be the  number used for  the
	    specific protocol the host is  used for. It means you need  several
	    entries if  you want to  provide addresses  for the  same host  but
	    different ports.

	    By specifying "*"  as host you  can tell curl  to resolve any  host
	    and specific  port  pair  to the  specified  address.  Wildcard  is
	    resolved last so  any --resolve with  a specific  host and port  is
	    used first.

	    The provided address set by this  option is used even if --ipv4  or
	    --ipv6 is set to make curl use another IP version.

	    By prefixing the host  with a '+' you can  make the entry time  out
	    after curl's default timeout (1 minute). Note that this only  makes
	    sense for long running parallel  transfers with a lot of files.  In
	    such cases, if this option is  used curl tries to resolve the  host
	    as it normally would once the timeout has expired.

	    Provide IPv6 addresses within [brackets].

	    To redirect  connects from  a specific  hostname or  any  hostname,
	    independently of port number, consider the --connect-to option.

	    Support for resolving with wildcard was added in 7.64.0.

	    Support for the '+' prefix was added in 7.75.0.

	    Support for specifying the  host component as  an IPv6 address  was
	    added in 8.13.0. --resolve can  be used several times in a  command
	    line

	    Examples:
	     curl --resolve example.com:443:127.0.0.1 https://example.com
	     curl --resolve example.com:443:[2001:db8::252f:efd6] \
		  https://example.com

	    See also --connect-to and --alt-svc.

    --retry <num>
	    If a  transient error  is returned  when curl  tries  to perform  a
	    transfer, it  retries  this  number  of  times  before  giving  up.
	    Setting the number  to 0  makes curl  do no retries  (which is  the
	    default). Transient  error  means either:  a  timeout, an  FTP  4xx
	    response code or an HTTP 408,  429, 500, 502, 503, 504, 522 or  524
	    response code.

	    When curl is about to retry  a transfer, it first waits one  second
	    and then for all  forthcoming retries it  doubles the waiting  time
	    until it  reaches 10  minutes,  which then  remains the  set  fixed
	    delay time between the rest of the retries. By using  --retry-delay
	    you  disable   this  exponential   backoff  algorithm.   See   also
	    --retry-max-time to limit the total time allowed for retries.

	    curl complies  with the  Retry-After: response  header if  one  was
	    present to know when to issue the next retry (added in  7.66.0). If
	    --retry is provided several times, the last set value is used.

	    Example:
	     curl --retry 7 https://example.com

	    See also --retry-max-time, --retry-connrefused and --retry-delay.

    --retry-all-errors
	    Retry on any error. This option is used together with --retry.

	    This option  is the  "sledgehammer" of  retrying. Do  not use  this
	    option by  default  (for example  in  your curlrc),  there  may  be
	    unintended consequences  such  as sending  or  receiving  duplicate
	    data. Do  not use with  redirected input  or output.  You might  be
	    better off handling your unique problems in a shell script.  Please
	    read the example below.

	    WARNING: For  server compatibility  curl attempts  to retry  failed
	    flaky transfers as close as possible to how they were  started, but
	    this is not possible with redirected input or output. For  example,
	    before retrying  it  removes  output data  from  a  failed  partial
	    transfer that was written  to an output  file. However this is  not
	    true of  data redirected  to a  | pipe  or >  file,  which are  not
	    reset. We strongly suggest  you do not  parse or record output  via
	    redirect in combination  with this  option, since  you may  receive
	    duplicate data.

	    By default  curl does not  return an  error for  transfers with  an
	    HTTP response code that  indicates an HTTP  error, if the  transfer
	    was successful. For example, if a server replies 404 Not  Found and
	    the reply  is  fully  received then  that  is not  an  error.  When
	    --retry is used then curl retries on some HTTP response  codes that
	    indicate transient HTTP errors, but that does not include most  4xx
	    response codes such as  404. If you want  to retry on all  response
	    codes that indicate  HTTP errors  (4xx and 5xx)  then combine  with
	    --fail. Providing --retry-all-errors  multiple times  has no  extra
	    effect. Disable it again with --no-retry-all-errors.

	    Example:
	     curl --retry 5 --retry-all-errors https://example.com

	    Added in 7.71.0. See also --retry.

    --retry-connrefused
	    In addition to the other conditions, also consider ECONNREFUSED  as
	    a transient error for  --retry. This option  is used together  with
	    --retry. Normally,  a  confused  connection  is  not  considered  a
	    transient error and therefore thus  not otherwise trigger a  retry.
	    Providing --retry-connrefused multiple times  has no extra  effect.
	    Disable it again with --no-retry-connrefused.

	    Example:
	     curl --retry-connrefused --retry 7 https://example.com

	    See also --retry and --retry-all-errors.

    --retry-delay <seconds>
	    Make curl  sleep  this amount  of time  before  each retry  when  a
	    transfer has failed with a transient error (it changes the  default
	    backoff time  algorithm  between  retries).  This  option  is  only
	    interesting if --retry  is also  used. Setting this  delay to  zero
	    makes curl use the default backoff time.

	    By default, curl uses  an exponentially increasing timeout  between
	    retries.

	    Starting in  curl 8.16.0,  this option  accepts a  time as  decimal
	    number  for parts  of  seconds.  The  decimal  value  needs  to  be
	    provided using  a dot  (.) as  decimal separator  -  not the  local
	    version  even  if   it  might  be   using  another  separator.   If
	    --retry-delay is  provided several  times, the  last set  value  is
	    used.

	    Example:
	     curl --retry-delay 5 --retry 7 https://example.com

	    See also --retry and --retry-max-time.

    --retry-max-time <seconds>
	    The retry  timer  is  reset  before  the  first  transfer  attempt.
	    Retries are done as  usual (see --retry) as  long as the timer  has
	    not reached  this given limit.  Notice that  if the  timer has  not
	    reached the limit,  the request  is made and  while performing,  it
	    may take  longer than this  given time  period. To  limit a  single
	    request's maximum time, use --max-time. Set this option to zero  to
	    not timeout retries.

	    Starting in  curl 8.16.0,  this option  accepts a  time as  decimal
	    number  for parts  of  seconds.  The  decimal  value  needs  to  be
	    provided using  a dot  (.) as  decimal separator  -  not the  local
	    version  even  if   it  might  be   using  another  separator.   If
	    --retry-max-time is provided several times,  the last set value  is
	    used.

	    Example:
	     curl --retry-max-time 30 --retry 10 https://example.com

	    See also --retry and --retry-delay.

    --sasl-authzid <identity>
	    (LDAP IMAP POP3  SMTP) Use this  authorization identity  (authzid),
	    during   SASL   PLAIN   authentication,   in   addition   to    the
	    authentication identity (authcid) as specified by --user.

	    If the  option is  not specified,  the server  derives the  authzid
	    from the authcid,  but if  specified, and depending  on the  server
	    implementation, it  may be  used to  access another  user's  inbox,
	    that the user has been granted  access to, or a shared mailbox  for
	    example. If --sasl-authzid is provided several times, the last  set
	    value is used.

	    Example:
	     curl --sasl-authzid zid imap://example.com/

	    Added in 7.66.0. See also --login-options.

    --sasl-ir
	    (LDAP  IMAP   POP3   SMTP)   Enable  initial   response   in   SASL
	    authentication. Such an  "initial response"  is a  message sent  by
	    the  client   to   the  server   after   the  client   selects   an
	    authentication mechanism.  Providing --sasl-ir  multiple times  has
	    no extra effect. Disable it again with --no-sasl-ir.

	    Example:
	     curl --sasl-ir imap://example.com/

	    See also --sasl-authzid.

    --service-name <name>
	    Set the  service name  for SPNEGO.  If --service-name  is  provided
	    several times, the last set value is used.

	    Example:
	     curl --service-name sockd/server https://example.com

	    See also --negotiate and --proxy-service-name.

    -S, --show-error
	    When used with --silent, it makes curl show an error message  if it
	    fails.

	    This option is global  and does not need  to be specified for  each
	    use of --next. Providing --show-error  multiple times has no  extra
	    effect. Disable it again with --no-show-error.

	    Example:
	     curl --show-error --silent https://example.com

	    See also --no-progress-meter.

    -i, --show-headers
	    (HTTP FTP)  Show  response headers  in  the output.  HTTP  response
	    headers can include things like  server name, cookies, date of  the
	    document, HTTP  version  and  more. With  non-HTTP  protocols,  the
	    "headers" are other server communication.

	    This option  makes  the response  headers  get saved  in  the  same
	    stream/output as the data. --dump-header exists to save headers  in
	    a separate stream.

	    To view the request headers, consider the --verbose option.

	    Prior to 7.75.0 curl did not  print the headers if --fail was  used
	    in combination with this option and there was an error  reported by
	    the server.

	    This option was called --include  before 8.10.0. The previous  name
	    remains functional. Providing --show-headers multiple times has  no
	    extra effect. Disable it again with --no-show-headers.

	    Example:
	     curl -i https://example.com

	    See also --verbose and --dump-header.

    --sigalgs <list>
	    (TLS) Set specific signature algorithms  to use during SSL  session
	    establishment according to RFC 5246, 7.4.1.4.1.

	    An algorithm  can  use either  a  signature algorithm  and  a  hash
	    algorithm pair separated  by a  "+" (e.g.  "ECDSA+SHA224"), or  its
	    TLS 1.3 signature scheme name (e.g. "ed25519").

	    Multiple algorithms can  be provided  by separating  them with  ":"
	    (e.g. "DSA+SHA256:rsa_pss_pss_sha256"). The parameter is  available
	    as "-sigalgs" in the OpenSSL "s_client" and "s_server" utilities.

	    "--sigalgs" allows a OpenSSL  powered curl to make  SSL-connections
	    with exactly  the signature  algorithms  requested by  the  client,
	    avoiding nontransparent client/server negotiations.

	    If this option is set,  the default signature algorithm list  built
	    into OpenSSL are ignored. If  --sigalgs is provided several  times,
	    the last set value is used.

	    Example:
	     curl --sigalgs ecdsa_secp256r1_sha256 https://example.com

	    Added in 8.14.0. See also --ciphers.

    -s, --silent
	    Silent or quiet mode. Do not show progress meter, warning  messages
	    or error messages. Makes curl  mute. It still outputs the data  you
	    ask  for,  potentially  even  to  the  terminal/stdout  unless  you
	    redirect it.

	    Use --show-error in  addition to  this option  to disable  progress
	    meter but still  show error messages.  Providing --silent  multiple
	    times has no extra effect. Disable it again with --no-silent.

	    Example:
	     curl -s https://example.com

	    See also --verbose, --stderr and --no-progress-meter.

    --skip-existing
	    If there is a local file present when a download is  requested, the
	    operation is skipped. Note that curl cannot know if the  local file
	    was previously  downloaded fine,  or if  it is  incomplete etc,  it
	    knows if there is a filename present in the file system or  not and
	    it skips the transfer if it is. Providing --skip-existing  multiple
	    times   has   no    extra   effect.   Disable    it   again    with
	    --no-skip-existing.

	    Example:
	     curl --skip-existing --output local/dir/file https://example.com

	    Added   in   8.10.0.   See   also   --output,   --remote-name   and
	    --no-clobber.

    --socks4 <host[:port]>
	    Use  the  specified  SOCKS4  proxy.  If  the  port  number  is  not
	    specified, it  is assumed  at  port 1080.  Using this  socket  type
	    makes curl  resolve the hostname  and pass  the address  on to  the
	    proxy.

	    To specify the  proxy on a  Unix domain  socket, use localhost  for
	    host and  append  the  absolute  path to  the  domain  socket.  For
	    example: "socks4://localhost/path/to/socket.sock"  (the scheme  may
	    be omitted).

	    This option  overrides any  previous use  of --proxy,  as they  are
	    mutually exclusive.

	    This option is  superfluous since  you can specify  a socks4  proxy
	    with --proxy using a socks4:// protocol prefix.

	    --preproxy can be used  to specify a SOCKS  proxy at the same  time
	    proxy is used with an HTTP/HTTPS proxy. In such a case,  curl first
	    connects to the SOCKS  proxy and then  connects (through SOCKS)  to
	    the HTTP or  HTTPS proxy.  If --socks4 is  provided several  times,
	    the last set value is used.

	    Example:
	     curl --socks4 hostname:4096 https://example.com

	    This  option  is  mutually   exclusive  with  --proxy,   --socks4a,
	    --socks5 and --socks5-hostname.  See also  --socks4a, --socks5  and
	    --socks5-hostname.

    --socks4a <host[:port]>
	    Use  the specified  SOCKS4a  proxy.  If  the  port  number  is  not
	    specified, it  is assumed  at port  1080. This  asks  the proxy  to
	    resolve the hostname.

	    To specify the  proxy on a  Unix domain  socket, use localhost  for
	    host and  append  the  absolute  path to  the  domain  socket.  For
	    example: "socks4a://localhost/path/to/socket.sock" (the scheme  may
	    be omitted).

	    This option  overrides any  previous use  of --proxy,  as they  are
	    mutually exclusive.

	    This option is superfluous  since you can  specify a socks4a  proxy
	    with --proxy using a socks4a:// protocol prefix.

	    --preproxy can be used  to specify a SOCKS  proxy at the same  time
	    --proxy is  used with an  HTTP/HTTPS proxy.  In such  a case,  curl
	    first connects  to  the  SOCKS proxy  and  then  connects  (through
	    SOCKS) to  the  HTTP  or  HTTPS proxy.  If  --socks4a  is  provided
	    several times, the last set value is used.

	    Example:
	     curl --socks4a hostname:4096 https://example.com

	    This option is mutually exclusive with --proxy, --socks4,  --socks5
	    and   --socks5-hostname.   See   also   --socks4,   --socks5    and
	    --socks5-hostname.

    --socks5 <host[:port]>
	    Use the specified SOCKS5 proxy - but resolve the hostname  locally.
	    If the port number is not specified, it is assumed at port 1080.

	    To specify the  proxy on a  Unix domain  socket, use localhost  for
	    host and  append  the  absolute  path to  the  domain  socket.  For
	    example: "socks5://localhost/path/to/socket.sock"  (the scheme  may
	    be omitted).

	    This option  overrides any  previous use  of --proxy,  as they  are
	    mutually exclusive.

	    This option is  superfluous since  you can specify  a socks5  proxy
	    with --proxy using a socks5:// protocol prefix.

	    --preproxy can be used  to specify a SOCKS  proxy at the same  time
	    --proxy is  used with an  HTTP/HTTPS proxy.  In such  a case,  curl
	    first connects  to  the  SOCKS proxy  and  then  connects  (through
	    SOCKS) to the HTTP or HTTPS proxy.

	    This option  does  not  work with  FTPS  or LDAP.  If  --socks5  is
	    provided several times, the last set value is used.

	    Examples:
	     curl --socks5 proxy.example:7000 https://example.com
	     curl --socks5 localhost/path/unix-domain https://example.com

	    This  option  is   mutually  exclusive   with  --proxy,   --socks4,
	    --socks4a and  --socks5-hostname.  See also  --socks5-hostname  and
	    --socks4a.

    --socks5-basic
	    Use username/password authentication  when connecting  to a  SOCKS5
	    proxy. The username/password authentication is enabled by  default.
	    Use --socks5-gssapi  to  force  GSS-API  authentication  to  SOCKS5
	    proxies. Providing  --socks5-basic  multiple  times  has  no  extra
	    effect.

	    Example:
	     curl --socks5-basic --socks5 hostname:4096 https://example.com

	    See also --socks5.

    --socks5-gssapi
	    (GSS/kerberos) Use  GSS-API  authentication when  connecting  to  a
	    SOCKS5 proxy. The GSS-API authentication is enabled by default  (if
	    curl is  compiled  with  GSS-API support).  Use  --socks5-basic  to
	    force   username/password   authentication   to   SOCKS5   proxies.
	    Providing --socks5-gssapi  multiple  times  has  no  extra  effect.
	    Disable it again with --no-socks5-gssapi.

	    Example:
	     curl --socks5-gssapi --socks5 hostname:4096 https://example.com

	    See also --socks5.

    --socks5-gssapi-nec
	    (GSS/kerberos) As  part of  the  GSS-API negotiation  a  protection
	    mode is negotiated. RFC 1961  says in section 4.3/4.4 it should  be
	    protected, but  the  NEC  reference implementation  does  not.  The
	    option --socks5-gssapi-nec allows the  unprotected exchange of  the
	    protection   mode   negotiation.   Providing    --socks5-gssapi-nec
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-socks5-gssapi-nec.

	    Example:
	     curl --socks5-gssapi-nec --socks5 hostname:4096 \
		  https://example.com

	    See also --socks5.

    --socks5-gssapi-service <name>
	    Set  the   service   name   for  a   socks   server.   Default   is
	    rcmd/server-fqdn. If  --socks5-gssapi-service is  provided  several
	    times, the last set value is used.

	    Example:
	     curl --socks5-gssapi-service sockd --socks5 hostname:4096 \
		  https://example.com

	    See also --socks5.

    --socks5-hostname <host[:port]>
	    Use the  specified SOCKS5  proxy  (and let  the proxy  resolve  the
	    hostname). If the port  number is not  specified, it is assumed  at
	    port 1080.

	    To specify the  proxy on a  Unix domain  socket, use localhost  for
	    host and  append  the  absolute  path to  the  domain  socket.  For
	    example: "socks5h://localhost/path/to/socket.sock" (the scheme  may
	    be omitted).

	    This option  overrides any  previous use  of --proxy,  as they  are
	    mutually exclusive.

	    This option is superfluous since you can specify a socks5  hostname
	    proxy with --proxy using a socks5h:// protocol prefix.

	    --preproxy can be used  to specify a SOCKS  proxy at the same  time
	    --proxy is  used with an  HTTP/HTTPS proxy.  In such  a case,  curl
	    first connects  to  the  SOCKS proxy  and  then  connects  (through
	    SOCKS)  to  the  HTTP  or  HTTPS  proxy.  If  --socks5-hostname  is
	    provided several times, the last set value is used.

	    Example:
	     curl --socks5-hostname proxy.example:7000 https://example.com

	    This  option  is   mutually  exclusive   with  --proxy,   --socks4,
	    --socks4a and --socks5. See also --socks5 and --socks4a.

    -Y, --speed-limit <speed>
	    If a transfer is slower than  this set speed (in bytes per  second)
	    for a given number of seconds, it gets aborted. The time  period is
	    set  with  --speed-time   and  is   30  seconds   by  default.   If
	    --speed-limit is  provided several  times, the  last set  value  is
	    used.

	    Example:
	     curl --speed-limit 300 --speed-time 10 https://example.com

	    See also --speed-time, --limit-rate and --max-time.

    -y, --speed-time <seconds>
	    If a transfer runs slower than speed-limit bytes per second  during
	    a speed-time  period, the  transfer is  aborted. If  speed-time  is
	    used, the default speed-limit is 1 unless set with --speed-limit.

	    This option controls  transfers (in both  directions) but does  not
	    affect slow connects  etc. If this  is a concern  for you, try  the
	    --connect-timeout  option.  If  --speed-time  is  provided  several
	    times, the last set value is used.

	    Example:
	     curl --speed-limit 300 --speed-time 10 https://example.com

	    See also --speed-limit and --limit-rate.

    --ssl
	    (FTP IMAP POP3 SMTP LDAP)  Warning: this is considered an  insecure
	    option. Consider using --ssl-reqd instead to be sure curl  upgrades
	    to a secure connection.

	    Try to  use  SSL/TLS for  the connection  -  often referred  to  as
	    STARTTLS or STLS  because of  the involved commands.  Reverts to  a
	    non-secure connection if the server  does not support SSL/TLS.  See
	    also --ftp-ssl-control  and  --ssl-reqd  for  different  levels  of
	    encryption required.

	    This option  is handled  in LDAP  (added in  7.81.0).  It is  fully
	    supported by the OpenLDAP backend  and ignored by the generic  ldap
	    backend.

	    Please  note  that  a  server  may  close  the  connection  if  the
	    negotiation fails.

	    This option was formerly known  as --ftp-ssl. That option name  can
	    still be used but might  be removed in a future version.  Providing
	    --ssl multiple times  has no  extra effect. Disable  it again  with
	    --no-ssl.

	    Example:
	     curl --ssl pop3://example.com/

	    See also --ssl-reqd, --insecure and --ciphers.

    --ssl-allow-beast
	    (TLS) Do not  work around a  security flaw  in the TLS1.0  protocol
	    known as BEAST. If this option  is not used, the TLS layer may  use
	    workarounds known  to  cause interoperability  problems  with  some
	    older server implementations.

	    This option only changes  how curl does TLS  1.0 and has no  effect
	    on later TLS versions.

	    WARNING: this option loosens  the TLS security,  and by using  this
	    flag  you  ask  for   exactly  that.  Providing   --ssl-allow-beast
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-ssl-allow-beast.

	    Example:
	     curl --ssl-allow-beast https://example.com

	    See also --proxy-ssl-allow-beast and --insecure.

    --ssl-auto-client-cert
	    (TLS) (Schannel) Automatically locate and use a client  certificate
	    for authentication, when requested by the server. Since the  server
	    can request any certificate that supports client authentication  in
	    the OS  certificate  store it  could  be a  privacy  violation  and
	    unexpected. Providing --ssl-auto-client-cert multiple times has  no
	    extra effect. Disable it again with --no-ssl-auto-client-cert.

	    Example:
	     curl --ssl-auto-client-cert https://example.com

	    Added in 7.77.0. See also --proxy-ssl-auto-client-cert.

    --ssl-no-revoke
	    (TLS) (Schannel)  Disable certificate  revocation checks.  WARNING:
	    this option loosens the  SSL security, and  by using this flag  you
	    ask for exactly that. Providing --ssl-no-revoke multiple times  has
	    no extra effect. Disable it again with --no-ssl-no-revoke.

	    Example:
	     curl --ssl-no-revoke https://example.com

	    See also --crlfile.

    --ssl-reqd
	    (FTP IMAP  POP3 SMTP  LDAP) Require  SSL/TLS for  the connection  -
	    often referred  to as  STARTTLS  or STLS  because of  the  involved
	    commands. Terminates  the  connection  if the  transfer  cannot  be
	    upgraded to use SSL/TLS.

	    This option  is handled  in LDAP  (added in  7.81.0).  It is  fully
	    supported by the OpenLDAP backend and rejected by the generic  ldap
	    backend if explicit TLS is required.

	    This option is unnecessary if you  use a URL scheme that in  itself
	    implies immediate and implicit  use of TLS,  like for FTPS,  IMAPS,
	    POP3S, SMTPS and  LDAPS. Such a  transfer always  fails if the  TLS
	    handshake does not work.

	    This  option  was  formerly  known  as  --ftp-ssl-reqd.   Providing
	    --ssl-reqd multiple times  has no  extra effect.  Disable it  again
	    with --no-ssl-reqd.

	    Example:
	     curl --ssl-reqd ftp://example.com

	    See also --ssl and --insecure.

    --ssl-revoke-best-effort
	    (TLS) (Schannel)  Ignore certificate  revocation checks  when  they
	    failed  due  to   missing/offline  distribution   points  for   the
	    revocation   check   lists.   Providing    --ssl-revoke-best-effort
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-ssl-revoke-best-effort.

	    Example:
	     curl --ssl-revoke-best-effort https://example.com

	    Added in 7.70.0. See also --crlfile and --insecure.

    --ssl-sessions <filename>
	    (TLS) **WARNING**:  this  option is  experimental.  Do not  use  in
	    production. Use the  given file  to load SSL  session tickets  into
	    curl's cache  before  starting  any  transfers. At  the  end  of  a
	    successful curl run, the cached  SSL sessions tickets are saved  to
	    the file, replacing any previous content.

	    The file does not  have to exist, but curl  reports an error if  it
	    is unable  to create  it. Unused  loaded tickets  are saved  again,
	    unless they  get  replaced  or  purged from  the  cache  for  space
	    reasons.

	    Using a session  file allows  "--tls-earlydata" to  send the  first
	    request in "0-RTT" mode, should an SSL session with the  feature be
	    found. Note that  a server may  not support  early data. Also  note
	    that early data does  not provide forward  secrecy, e.g. is not  as
	    secure.

	    The SSL session  tickets are  stored as base64  encoded text,  each
	    ticket on its own line. The hostnames are cryptographically  salted
	    and hashed.  While this  prevents someone  from easily  seeing  the
	    hosts you contacted, they could still check if a specific  hostname
	    matches one of the values.

	    This feature requires  that the underlying  libcurl was built  with
	    the experimental  SSL session  import/export feature  (SSLS-EXPORT)
	    enabled. If --ssl-sessions is provided several times, the last  set
	    value is used.

	    Example:
	     curl --ssl-sessions sessions.txt https://example.com

	    Added in 8.12.0. See also --tls-earlydata.

    -2, --sslv2
	    (SSL) This option previously  asked curl to  use SSLv2, but is  now
	    ignored (added  in 7.77.0).  SSLv2  is widely  considered  insecure
	    (see RFC  6176).  Providing --sslv2  multiple  times has  no  extra
	    effect.

	    Example:
	     curl --sslv2 https://example.com

	    For --sslv2 to  work, it  requires that the  underlying libcurl  is
	    built to  support  TLS.  This option  is  mutually  exclusive  with
	    --sslv3, --tlsv1, --tlsv1.1 and  --tlsv1.2. See also --http1.1  and
	    --http2.

    -3, --sslv3
	    (SSL) This option previously  asked curl to  use SSLv3, but is  now
	    ignored (added  in 7.77.0).  SSLv3  is widely  considered  insecure
	    (see RFC  7568).  Providing --sslv3  multiple  times has  no  extra
	    effect.

	    Example:
	     curl --sslv3 https://example.com

	    For --sslv3 to  work, it  requires that the  underlying libcurl  is
	    built to  support  TLS.  This option  is  mutually  exclusive  with
	    --sslv2, --tlsv1, --tlsv1.1 and  --tlsv1.2. See also --http1.1  and
	    --http2.

    --stderr <file>
	    Redirect all writes  to stderr  to the specified  file instead.  If
	    the filename is a plain '-', it is instead written to stdout.

	    This option is global  and does not need  to be specified for  each
	    use of --next. If --stderr is provided several times, the  last set
	    value is used.

	    Example:
	     curl --stderr output.txt https://example.com

	    See also --verbose and --silent.

    --styled-output
	    Enable automatic use of bold font styles when writing HTTP  headers
	    to the terminal. Use --no-styled-output to switch them off.

	    Styled output requires  a terminal that  supports bold fonts.  This
	    feature is not  present on  curl for  Windows due to  lack of  this
	    capability.

	    This option is global  and does not need  to be specified for  each
	    use of  --next. Providing  --styled-output  multiple times  has  no
	    extra effect. Disable it again with --no-styled-output.

	    Example:
	     curl --styled-output -I https://example.com

	    See also --head and --verbose.

    --suppress-connect-headers
	    When --proxytunnel is used  and a CONNECT  request is made, do  not
	    output proxy CONNECT response headers.  This option is meant to  be
	    used with --dump-header  or --show-headers which  are used to  show
	    protocol headers in the output.  It has no effect on debug  options
	    such  as  --verbose  or  --trace,  or  any  statistics.   Providing
	    --suppress-connect-headers multiple  times  has  no  extra  effect.
	    Disable it again with --no-suppress-connect-headers.

	    Example:
	     curl --suppress-connect-headers --show-headers -x proxy \
		  https://example.com

	    See also --dump-header, --show-headers and --proxytunnel.

    --tcp-fastopen
	    Enable use of  TCP Fast  Open (RFC 7413).  TCP Fast Open  is a  TCP
	    extension that allows data to  be sent earlier over the  connection
	    (before the  final handshake  ACK) if  the client  and server  have
	    been connected previously. Providing --tcp-fastopen multiple  times
	    has no extra effect. Disable it again with --no-tcp-fastopen.

	    Example:
	     curl --tcp-fastopen https://example.com

	    See also --false-start.

    --tcp-nodelay
	    Turn on the TCP_NODELAY option.

	    This option disables  the Nagle algorithm  on TCP connections.  The
	    purpose of  this  algorithm is  to  minimize the  number  of  small
	    packets on the  network (where "small  packets" means TCP  segments
	    less than the Maximum Segment Size for the network).

	    Maximizing the amount of data sent per TCP segment is  good because
	    it  amortizes the  overhead  of  the  send.  In  some  cases  small
	    segments may need to be sent without delay. This is  less efficient
	    than sending larger amounts of  data at a time, and can  contribute
	    to congestion on the network if overdone.

	    curl sets this option by default and you need to  explicitly switch
	    it off if you do  not want it on. Providing --tcp-nodelay  multiple
	    times has no extra effect. Disable it again with --no-tcp-nodelay.

	    Example:
	     curl --tcp-nodelay https://example.com

	    See also --no-buffer.

    -t, --telnet-option <opt=val>
	    (TELNET) Pass  options to  the telnet  protocol. Supported  options
	    are:

	    TTYPE=<term>

		Sets the terminal type.

	    XDISPLOC=<X display>

		Sets the X display location.

	    NEW_ENV=<var,val>

		Sets an environment variable.

	    --telnet-option can be used several times in a command line

	    Example:
	     curl -t TTYPE=vt100 telnet://example.com/

	    See also --config.

    --tftp-blksize <value>
	    (TFTP) Set the TFTP  BLKSIZE option (must  be 512 or larger).  This
	    is the block size that curl tries to use when transferring  data to
	    or  from  a  TFTP  server.  By  default  512  bytes  are  used.  If
	    --tftp-blksize is provided  several times,  the last  set value  is
	    used.

	    Example:
	     curl --tftp-blksize 1024 tftp://example.com/file

	    See also --tftp-no-options.

    --tftp-no-options
	    (TFTP) Do not  send TFTP  options requests.  This improves  interop
	    with some  legacy  servers  that do  not  acknowledge  or  properly
	    implement TFTP options. When this option is used --tftp-blksize  is
	    ignored. Providing --tftp-no-options  multiple times  has no  extra
	    effect. Disable it again with --no-tftp-no-options.

	    Example:
	     curl --tftp-no-options tftp://192.168.0.1/

	    See also --tftp-blksize.

    -z, --time-cond <time>
	    (HTTP FTP) Request  a file that  has been  modified later than  the
	    given time  and date, or  one that  has been  modified before  that
	    time. The date expression  can be all sorts  of date strings or  if
	    it does not match  any internal ones, it  is treated as a  filename
	    and curl tries to get the modification date (mtime) from  that file
	    instead. See  the  curl_getdate(3)  man page  for  date  expression
	    details.

	    Start the date expression with a dash (-) to make it request  for a
	    document that  is older  than  the given  date/time, default  is  a
	    document that is newer than the specified date/time.

	    If provided a non-existing file, curl outputs a warning about  that
	    fact and proceeds to do  the transfer without a time condition.  If
	    --time-cond is provided several times, the last set value is used.

	    Examples:
	     curl -z "Wed 01 Sep 2021 12:18:00" https://example.com
	     curl -z "-Wed 01 Sep 2021 12:18:00" https://example.com
	     curl -z file https://example.com

	    See also --etag-compare and --remote-time.

    --tls-earlydata
	    (TLS) Enable the use  of TLSv1.3 early  data, also known as  '0RTT'
	    where possible.  This has  security implications  for the  requests
	    sent that way.

	    This option can be used when curl is built to use  GnuTLS, wolfSSL,
	    quictls and OpenSSL as a  TLS provider (but not BoringSSL,  AWS-LC,
	    or Rustls).

	    If a server supports this  TLSv1.3 feature, and to what extent,  is
	    announced as part  of the TLS  "session" sent  back to curl.  Until
	    curl has  seen such a  session in  a previous  request, early  data
	    cannot be used.

	    When a new connection  is initiated with  a known TLSv1.3  session,
	    and that session  announced early data  support, the first  request
	    on this connection is  sent before the  TLS handshake is  complete.
	    While the  early  data  is  also encrypted,  it  is  not  protected
	    against replays.  An  attacker can  send  your early  data  to  the
	    server again and the server would accept it.

	    If your  request contacts  a  public server  and only  retrieves  a
	    file, there may be no harm  in that. If the first request orders  a
	    refrigerator for you, it is probably  not a good idea to use  early
	    data for it. curl cannot  deduce what the security implications  of
	    your requests actually are and make this decision for you.

	    The amount  of  early  data sent  can  be inspected  by  using  the
	    "--write-out" variable "tls_earlydata".

	    WARNING: this option has security implications. See above for  more
	    details. Providing  --tls-earlydata  multiple times  has  no  extra
	    effect. Disable it again with --no-tls-earlydata.

	    Example:
	     curl --tls-earlydata https://example.com

	    Added in 8.11.0. See also --tlsv1.3, --tls-max and --ssl-sessions.

    --tls-max <VERSION>
	    (TLS) Set the maximum allowed  TLS version. The minimum  acceptable
	    version is set by tlsv1.0, tlsv1.1, tlsv1.2 or tlsv1.3.

	    If the connection is done  without TLS, this option has no  effect.
	    This includes QUIC-using (HTTP/3) transfers.

	    default

		Use up to the recommended TLS version.

	    1.0

		Use up to TLSv1.0.

	    1.1

		Use up to TLSv1.1.

	    1.2

		Use up to TLSv1.2.

	    1.3

		Use up to TLSv1.3.

	    If --tls-max  is provided  several  times, the  last set  value  is
	    used.

	    Examples:
	     curl --tls-max 1.2 https://example.com
	     curl --tls-max 1.3 --tlsv1.2 https://example.com

	    For --tls-max to work, it  requires that the underlying libcurl  is
	    built to support TLS. See also --tlsv1.0, --tlsv1.1, --tlsv1.2  and
	    --tlsv1.3.

    --tls13-ciphers <list>
	    (TLS) Set  which  cipher suites  to use  in  the connection  if  it
	    negotiates TLS 1.3. The list  of ciphers suites must specify  valid
	    ciphers. Read up on TLS 1.3 cipher suite details on this URL:

	    https://curl.se/docs/ssl-ciphers.html

	    This option is  used when  curl is  built to use  OpenSSL 1.1.1  or
	    later, wolfSSL, or mbedTLS 3.6.0 or later.

	    Before curl 8.10.0 with mbedTLS  or wolfSSL, TLS 1.3 cipher  suites
	    were set  by  using the  --ciphers  option. If  --tls13-ciphers  is
	    provided several times, the last set value is used.

	    Example:
	     curl --tls13-ciphers TLS_AES_128_GCM_SHA256 https://example.com

	    See also --ciphers, --proxy-tls13-ciphers and --curves.

    --tlsauthtype <type>
	    (TLS) Set TLS  authentication type. Currently,  the only  supported
	    option  is  "SRP",  for  TLS-SRP  (RFC  5054).  If  --tlsuser   and
	    --tlspassword are  specified but  --tlsauthtype is  not, then  this
	    option defaults to "SRP". This option works only if the  underlying
	    libcurl is built  with TLS-SRP support,  which requires OpenSSL  or
	    GnuTLS with TLS-SRP support.  If --tlsauthtype is provided  several
	    times, the last set value is used.

	    Example:
	     curl --tlsauthtype SRP https://example.com

	    See also --tlsuser.

    --tlspassword <string>
	    (TLS) Set  password  to  use with  the  TLS  authentication  method
	    specified with --tlsauthtype. Requires that --tlsuser is set.

	    This option  does  not  work  with TLS  1.3.  If  --tlspassword  is
	    provided several times, the last set value is used.

	    Example:
	     curl --tlspassword pwd --tlsuser user https://example.com

	    See also --tlsuser.

    --tlsuser <name>
	    (TLS) Set  username  for use  with  the TLS  authentication  method
	    specified with --tlsauthtype. Requires  that --tlspassword also  is
	    set.

	    This option does not  work with TLS  1.3. If --tlsuser is  provided
	    several times, the last set value is used.

	    Example:
	     curl --tlspassword pwd --tlsuser user https://example.com

	    See also --tlspassword.

    -1, --tlsv1
	    (TLS) Use at least TLS  version 1.x when negotiating with a  remote
	    TLS server. That means TLS version 1.0 or higher Providing  --tlsv1
	    multiple times has no extra effect.

	    Example:
	     curl --tlsv1 https://example.com

	    For --tlsv1 to  work, it  requires that the  underlying libcurl  is
	    built to  support  TLS.  This option  is  mutually  exclusive  with
	    --tlsv1.1,  --tlsv1.2  and  --tlsv1.3.   See  also  --http1.1   and
	    --http2.

    --tlsv1.0
	    (TLS) Force curl to  use TLS version  1.0 or later when  connecting
	    to a remote TLS server.

	    In old versions of curl this option was documented to  allow _only_
	    TLS 1.0.  That  behavior  was inconsistent  depending  on  the  TLS
	    library. Use --tls-max if  you want to  set a maximum TLS  version.
	    Providing --tlsv1.0 multiple times has no extra effect.

	    Example:
	     curl --tlsv1.0 https://example.com

	    See also --tlsv1.3.

    --tlsv1.1
	    (TLS) Force curl to  use TLS version  1.1 or later when  connecting
	    to a remote TLS server.

	    In old versions of curl this option was documented to  allow _only_
	    TLS 1.1.  That  behavior  was inconsistent  depending  on  the  TLS
	    library. Use --tls-max if  you want to  set a maximum TLS  version.
	    Providing --tlsv1.1 multiple times has no extra effect.

	    Example:
	     curl --tlsv1.1 https://example.com

	    See also --tlsv1.3 and --tls-max.

    --tlsv1.2
	    (TLS) Force curl to  use TLS version  1.2 or later when  connecting
	    to a remote TLS server.

	    In old versions of curl this option was documented to  allow _only_
	    TLS 1.2.  That  behavior  was inconsistent  depending  on  the  TLS
	    library. Use --tls-max if  you want to  set a maximum TLS  version.
	    Providing --tlsv1.2 multiple times has no extra effect.

	    Example:
	     curl --tlsv1.2 https://example.com

	    See also --tlsv1.3 and --tls-max.

    --tlsv1.3
	    (TLS) Force curl to  use TLS version  1.3 or later when  connecting
	    to a remote TLS server.

	    If the connection is done  without TLS, this option has no  effect.
	    This includes QUIC-using (HTTP/3) transfers.

	    Note that TLS 1.3 is  not supported by all TLS backends.  Providing
	    --tlsv1.3 multiple times has no extra effect.

	    Example:
	     curl --tlsv1.3 https://example.com

	    See also --tlsv1.2 and --tls-max.

    --tr-encoding
	    (HTTP) Request a  compressed Transfer-Encoding  response using  one
	    of the  algorithms curl  supports, and  uncompress the  data  while
	    receiving it.

	    This method was once  intended to be the  way to do automatic  data
	    compression  for  HTTP  but   for  all  practical  purposes   using
	    Content-Encoding as done with --compressed has superseded  transfer
	    encoding. The --tr-encoding  option is therefore  often not be  one
	    you want.  Providing  --tr-encoding  multiple times  has  no  extra
	    effect. Disable it again with --no-tr-encoding.

	    Example:
	     curl --tr-encoding https://example.com

	    See also --compressed.

    --trace <file>
	    Save  a  full  trace  dump  of  all  incoming  and  outgoing  data,
	    including descriptive information,  in the given  output file.  Use
	    "-" as  filename to  have the  output sent  to stdout.  Use "%"  as
	    filename to have the output sent to stderr.

	    Note that verbose  output of  curl activities  and network  traffic
	    might contain sensitive data,  including usernames, credentials  or
	    secret data content.  Be aware  and be careful  when sharing  trace
	    logs with others.

	    This option is global  and does not need  to be specified for  each
	    use of --next. If --trace  is provided several times, the last  set
	    value is used.

	    Example:
	     curl --trace log.txt https://example.com

	    This   option   is   mutually   exclusive   with   --verbose    and
	    --trace-ascii. See also --trace-ascii, --trace-config,  --trace-ids
	    and --trace-time.

    --trace-ascii <file>
	    Save  a  full  trace  dump  of  all  incoming  and  outgoing  data,
	    including descriptive information,  in the given  output file.  Use
	    "-" as  filename to  have the  output sent  to stdout.  Use "%"  as
	    filename to send the output to stderr.

	    This is similar to  --trace, but leaves out  the hex part and  only
	    shows the  ASCII part of  the dump.  It makes  smaller output  that
	    might be easier to read for untrained humans.

	    Note that verbose  output of  curl activities  and network  traffic
	    might contain sensitive data,  including usernames, credentials  or
	    secret data content.  Be aware  and be careful  when sharing  trace
	    logs with others.

	    This option is global  and does not need  to be specified for  each
	    use of  --next. If  --trace-ascii is  provided several  times,  the
	    last set value is used.

	    Example:
	     curl --trace-ascii log.txt https://example.com

	    This option is mutually exclusive  with --trace and --verbose.  See
	    also --verbose and --trace.

    --trace-config <string>
	    Set configuration  for  trace  output. A  comma-separated  list  of
	    components where detailed output can be made available from.  Names
	    are  case-insensitive.   Specify   'all'  to   enable   all   trace
	    components.

	    In addition to trace component  names, specify "ids" and "time"  to
	    avoid extra --trace-ids or --trace-time parameters.

	    See the curl_global_trace(3) man page for more details.

	    This option is global  and does not need  to be specified for  each
	    use of  --next.  --trace-config can  be  used several  times  in  a
	    command line

	    Example:
	     curl --trace-config ids,http/2 https://example.com

	    Added in 8.3.0. See also --verbose and --trace.

    --trace-ids
	    Prepend the transfer  and connection identifiers  to each trace  or
	    verbose line that curl displays.

	    The identifiers are unique numbers assigned to each connection  and
	    transfer to allow a  user to better  understand which transfer  and
	    connection each verbose output line refers to.

	    This option is global  and does not need  to be specified for  each
	    use of --next.  Providing --trace-ids multiple  times has no  extra
	    effect. Disable it again with --no-trace-ids.

	    Example:
	     curl --trace-ids --trace-ascii output https://example.com

	    Added in 8.2.0. See also --trace and --verbose.

    --trace-time
	    Prepend a  time  stamp to  each trace  or  verbose line  that  curl
	    displays.

	    This option is global  and does not need  to be specified for  each
	    use of --next. Providing --trace-time  multiple times has no  extra
	    effect. Disable it again with --no-trace-time.

	    Example:
	     curl --trace-time --trace-ascii output https://example.com

	    See also --trace and --verbose.

    --unix-socket <path>
	    (HTTP) Connect  to  the server  through  this Unix  domain  socket,
	    instead of using the network.

	    To connect  to a proxy  over Unix  domain socket,  see --proxy.  If
	    --unix-socket is  provided several  times, the  last set  value  is
	    used.

	    Example:
	     curl --unix-socket socket-path https://example.com

	    See also --abstract-unix-socket.

    -T, --upload-file <file>
	    Upload the specified local file to the remote URL.

	    If there is  no file part  in the specified  URL, curl appends  the
	    local file name to the end of the URL before the  operation starts.
	    You must use a  trailing slash (/) on  the last directory to  prove
	    to curl that  there is no  filename or curl  thinks that your  last
	    directory name is the remote filename to use.

	    When putting  the  local  filename at  the  end of  the  URL,  curl
	    ignores what is  on the  left side  of any slash  (/) or  backslash
	    (\\) used in  the filename and  only appends what  is on the  right
	    side of the rightmost such character.

	    Use the filename  "-" (a  single dash)  to use stdin  instead of  a
	    given file. Alternately, the filename "." (a single period) may  be
	    specified instead  of "-"  to  use stdin  in non-blocking  mode  to
	    allow reading server output while stdin is being uploaded.

	    If this  option is  used with  an HTTP(S)  URL, the  PUT method  is
	    used.

	    You can  specify one  --upload-file  for each  URL on  the  command
	    line. Each --upload-file +  URL pair specifies  what to upload  and
	    to  where.  curl  also  supports  globbing  of  the   --upload-file
	    argument, meaning that you  can upload multiple  files to a  single
	    URL by using the same URL globbing style supported in the URL.

	    When uploading to an SMTP  server: the uploaded data is assumed  to
	    be RFC  5322 formatted.  It has  to feature  the  necessary set  of
	    headers and mail body formatted correctly by the user as  curl does
	    not transcode nor encode  it further in  any way. --upload-file  is
	    associated with a  single URL.  Use it  once per URL  when you  use
	    several URLs in a command line.

	    Examples:
	     curl -T file https://example.com
	     curl -T "img[1-1000].png" ftp://ftp.example.com/
	     curl --upload-file "{file1,file2}" https://example.com
	     curl -T file -T file2 https://example.com https://example.com

	    See also --get, --head, --request and --data.

    --upload-flags <flags>
	    (IMAP) Specify  additional behavior  to  apply to  uploaded  files.
	    Flags  are  specified   as  either  a  single   flag  value  or   a
	    comma-separated   list   of   flag   values.   These   values   are
	    case-sensitive and may  be negated  by prepending them  with a  '-'
	    character.  Currently  the  following  flag  values  are  accepted:
	    answered,  deleted,  draft,  flagged,   and  seen.  The   currently
	    accepted flag  values are used  to set  flags on  IMAP uploads.  If
	    --upload-flags is provided  several times,  the last  set value  is
	    used.

	    Example:
	     curl --upload-flags Flagged,!Seen --upload-file local/dir/file \
		  https://example.com

	    Added in 8.13.0. See also --upload-file.

    --url <url/file>
	    Specify a URL to fetch or send data to.

	    If the  given  URL  is  missing  a scheme  (such  as  "http://"  or
	    "ftp://" etc)  curl  guesses  which  scheme to  use  based  on  the
	    hostname. If the outermost subdomain name matches DICT, FTP,  IMAP,
	    LDAP, POP3 or SMTP case insensitively, then that protocol is  used,
	    otherwise it  assumes  HTTP.  Scheme guessing  can  be  avoided  by
	    providing a full URL including  the scheme, or disabled by  setting
	    a default protocol, see --proto-default for details.

	    To control  where  the  contents  of a  retrieved  URL  is  written
	    instead  of  the   default  stdout,   use  the   --output  or   the
	    --remote-name options. When  retrieving multiple URLs  in a  single
	    invoke, each  provided  URL  needs its  own  dedicated  destination
	    option unless --remote-name-all is used.

	    On  Windows,  "file://"  accesses  can  be  converted  to   network
	    accesses by the operating system.

	    Starting  in curl  8.13.0,  curl  can  be  told  to  download  URLs
	    provided in a text file, one  URL per line. It is done with  "--url
	    @filename": so instead of  a URL, you  specify a filename  prefixed
	    with the "@" symbol. It can be  told to load the list of URLs  from
	    stdin by providing an argument like "@-".

	    When  downloading  URLs   given  in  a   file,  it  implies   using
	    --remote-name for each provided  URL. The URLs  are full, there  is
	    no  globbing  applied   or  done   on  these.   Features  such   as
	    --skip-existing work fine in combination with this.

	    Lines in the URL file that  start with "#" are treated as  comments
	    and are skipped. --url can be used several times in a command line

	    Examples:
	     curl --url https://example.com
	     curl --url @file

	    See     also      --next,      --config,      --path-as-is      and
	    --disallow-username-in-url.

    --url-query <data>
	    Add a piece of  data, usually a  name + value pair,  to the end  of
	    the URL  query  part. The  syntax is  identical  to that  used  for
	    --data-urlencode with one extension:

	    If the argument starts  with a '+' (plus),  the rest of the  string
	    is provided as-is unencoded.

	    The query part of a URL  is the one following the question mark  on
	    the right end. --url-query can  be used several times in a  command
	    line

	    Examples:
	     curl --url-query name=val https://example.com
	     curl --url-query =encodethis http://example.net/foo
	     curl --url-query name@file https://example.com
	     curl --url-query @fileonly https://example.com
	     curl --url-query "+name=%20foo" https://example.com

	    Added in 7.87.0. See also --data-urlencode and --get.

    -B, --use-ascii
	    (FTP LDAP TFTP) Enable ASCII transfer mode. For FTP, this  can also
	    be enforced  by using a  URL that  ends with  ";type=A". For  TFTP,
	    this  can  also  be  enforced  by  using  a  URL  that   ends  with
	    ";mode=netascii". This option causes data  sent to stdout to be  in
	    text mode for Win32  systems. Providing --use-ascii multiple  times
	    has no extra effect. Disable it again with --no-use-ascii.

	    Example:
	     curl -B ftp://example.com/README

	    See also --crlf and --data-ascii.

    -u, --user <user:password>
	    Specify   the   username   and   password   to   use   for   server
	    authentication. Overrides --netrc and --netrc-optional.

	    If you specify only the username, curl prompts for a password.

	    The username and passwords are  split up on the first colon,  which
	    makes it  impossible  to use  a colon  in  the username  with  this
	    option. The password can, still.

	    On systems where  it works,  curl hides the  given option  argument
	    from process listings.  This is not  enough to protect  credentials
	    from possibly getting  seen by other  users on  the same system  as
	    they still  are visible  for a  moment before  being cleared.  Such
	    sensitive data should be retrieved  from a file instead or  similar
	    and never used in clear text in a command line.

	    When using  Kerberos V5  with  a Windows  based server  you  should
	    include the Windows domain name  in the username, in order for  the
	    server to successfully  obtain a  Kerberos Ticket. If  you do  not,
	    then the initial authentication handshake may fail.

	    When using NTLM, the username can be specified without the  domain,
	    if there is a single domain and forest in your setup for example.

	    To specify the domain name use either Down-Level Logon Name  or UPN
	    (User  Principal  Name)  formats.  For  example,  EXAMPLE\user  and
	    user@example.com respectively.

	    If you use a Windows SSPI-enabled curl binary and perform  Kerberos
	    V5, Negotiate,  NTLM or  Digest authentication  then you  can  tell
	    curl to select the username  and password from your environment  by
	    specifying a single colon  with this option:  "-u :". If --user  is
	    provided several times, the last set value is used.

	    Example:
	     curl -u user:secret https://example.com

	    See also --netrc and --config.

    -A, --user-agent <name>
	    (HTTP) Specify the User-Agent  string to send  to the HTTP  server.
	    To encode blanks  in the  string, surround the  string with  single
	    quote marks. This header can also  be set with the --header or  the
	    --proxy-header options.

	    If you give an empty argument to --user-agent (""), it  removes the
	    header completely from the request.  If you prefer a blank  header,
	    you can set it to a single space (" ").

	    By  default,   curl   uses  curl/VERSION,   such   as   User-Agent:
	    curl/8.19.0. If --user-agent  is provided several  times, the  last
	    set value is used.

	    Example:
	     curl -A "Agent 007" https://example.com

	    See also --header and --proxy-header.

    --variable <[%]name=text/@file>
	    Set a  variable with  "name=content" or  "name@file" (where  "file"
	    can be stdin if  set to a  single dash ("-")). The  name is a  case
	    sensitive identifier that  must consist  of no  other letters  than
	    a-z,  A-Z,  0-9  or  underscore.  The  specified  content  is  then
	    associated with this identifier.

	    Setting the same  variable name again  overwrites the old  contents
	    with the new.

	    The contents of  a variable can  be referenced  in a later  command
	    line option when  that option  name is  prefixed with  "--expand-",
	    and the name is used as "{{name}}".

	    --variable can import  environment variables into  the name  space.
	    Opt to  either  require  the  environment variable  to  be  set  or
	    provide a default value for the variable in case it is  not already
	    set.

	    --variable %name imports the variable called "name" but exits  with
	    an error  if  that environment  variable  is not  already  set.  To
	    provide a default  value if  the environment variable  is not  set,
	    use --variable  %name=content  or  --variable  %name@content.  Note
	    that on  some systems -  but not  all -  environment variables  are
	    case insensitive.

	    Added in curl 8.12.0: you can  get a byte range from the source  by
	    appending "[start-end]" to the variable  name, where start and  end
	    are byte offsets to include from the contents. For example,  asking
	    for offset  "2-10"  means  offset two  to  offset  ten,  inclusive,
	    resulting in 9 bytes in total. "2-2" means a single byte  at offset
	    2. Not providing a  second number implies to  the end of data.  The
	    start offset cannot  be larger than  the end  offset. Asking for  a
	    range that is outside of the file size makes the  variable contents
	    empty. For  example, getting  the first  one hundred  bytes from  a
	    given file:

		curl --variable "fraction[0-99]@filename"

	    Given a byte  range that has  no data results  in an empty  string.
	    Asking for a range that is  larger than the content makes curl  use
	    the piece of the data that exists.

	    To assign  a variable  using contents  from another  variable,  use
	    --expand-variable. Like for example assigning a new variable  using
	    contents from two other:

		curl --expand-variable "user={{firstname}} {{lastname}}"

	    When expanding variables,  curl supports  a set  of functions  that
	    can make the variable contents more convenient to use. You  apply a
	    function to a variable  expansion by adding  a colon and then  list
	    the desired functions in a  comma-separated list that is  evaluated
	    in a left-to-right order. Variable content holding null bytes  that
	    are not encoded when expanded causes an error.

	    Available functions:

	    trim

		removes all leading and trailing white space.

		Example:

		    curl --expand-url https://example.com/{{var:trim}}

	    json

		outputs the content using JSON string quoting rules.

		Example:

		    curl --expand-data {{data:json}} https://example.com

	    url

		shows the content URL (percent) encoded.

		Example:

		    curl --expand-url https://example.com/{{path:url}}

	    b64

		expands the variable base64 encoded

		Example:

		    curl --expand-url https://example.com/{{var:b64}}

	    64dec

		decodes a base64  encoded character sequence.  If the  sequence
		is not possible to decode, it instead outputs "[64dec-fail]"

		Example:

		    curl --expand-url https://example.com/{{var:64dec}}

		(Added in 8.13.0)

	    --variable can be used several times in a command line

	    Example:
	     curl --variable name=smith --expand-url "https:\
		  //example.com/{{name}}"

	    Added in 8.3.0. See also --config.

    -v, --verbose
	    Make curl output verbose  information during the operation.  Useful
	    for debugging and seeing  what's going on  under the hood.  Verbose
	    output lines are prefixed with letters:

	    >

		header sent by curl

	    <

		header received by curl

	    }

		data sent by curl

	    {

		data received by curl

	    *

		additional info provided by  curl. Text that adds  explanations
		what goes on and about choices curl does.

	    If you  only want  HTTP headers  in the  output, --show-headers  or
	    --dump-header might be more suitable options.

	    Since curl 8.10, mentioning this  option several times in the  same
	    argument increases  the level  of the  trace output.  As before,  a
	    single --verbose or --no-verbose reverts any additions by  previous
	    "-vv" again. This  means that "-vv  -v" is  equivalent to a  single
	    -v. This avoids unwanted verbosity when the option is mentioned  in
	    the command line and curl config files.

	    Using  it  twice,  e.g.  "-vv",  outputs  time  (--trace-time)  and
	    transfer ids (--trace-ids),  as well  as enabling  tracing for  all
	    protocols (--trace-config protocol).

	    Adding a third verbose  outputs transfer content (--trace-ascii  %)
	    and   enables   tracing   of   more   components    (--trace-config
	    read,write,ssl).

	    A  fourth   time   adds   tracing  of   all   network   components.
	    (--trace-config network).

	    Any addition of the verbose option after that has no effect.

	    If you  think this  option does  not give  you  the right  details,
	    consider using --trace  or --trace-ascii  instead. Or  use it  only
	    once and use  --trace-config to trace  the specific components  you
	    wish to see.

	    Note that verbose  output of  curl activities  and network  traffic
	    might contain sensitive data,  including usernames, credentials  or
	    secret data content.  Be aware  and be careful  when sharing  trace
	    logs with others.

	    When the  output  contains  protocol  headers,  those  lines  might
	    include  carriage  return  (ASCII  code  13)  characters,  even  on
	    platforms that  otherwise normally  only  use linefeed  to  signify
	    line separations - as curl  shows the exact contents arriving  from
	    the server.

	    This option is global  and does not need  to be specified for  each
	    use of  --next. Providing  --verbose multiple  times has  no  extra
	    effect. Disable it again with --no-verbose.

	    Example:
	     curl --verbose https://example.com

	    This option is mutually  exclusive with --trace and  --trace-ascii.
	    See also --show-headers, --silent, --trace and --trace-ascii.

    -V, --version
	    Display information about curl and the libcurl version it uses.

	    The first  line includes  the  full version  of curl,  libcurl  and
	    other 3rd party libraries linked with the executable.

	    This line may contain one or more TLS libraries. curl can  be built
	    to support more  than one TLS  library which then  makes curl -  at
	    start-up  -  select  which  particular  backend  to  use  for  this
	    invocation.

	    If curl  supports more than  one TLS  library like  this, the  ones
	    that are not  selected by  default are  listed within  parentheses.
	    Thus, if  you  do  not  specify  which backend  to  use  (with  the
	    "CURL_SSL_BACKEND" environment  variable)  the one  listed  without
	    parentheses is  used. Such  builds also  have "MultiSSL"  set as  a
	    feature.

	    The second  line (starts  with "Release-Date:")  shows the  release
	    date.

	    The third line (starts with "Protocols:") shows all protocols  that
	    libcurl reports to support.

	    The fourth line (starts  with "Features:") shows specific  features
	    libcurl reports to offer. Available features include:

	    alt-svc

		Support for the Alt-Svc: header is provided.

	    AsynchDNS

		This curl uses  asynchronous name  resolves. Asynchronous  name
		resolves can be done  using either the  c-ares or the  threaded
		resolver backends.

	    brotli

		Support for automatic brotli compression over HTTP(S).

	    CharConv

		curl was  built  with  support for  character  set  conversions
		(like EBCDIC)

	    Debug

		This curl uses a  libcurl built with  Debug. This enables  more
		error-tracking and  memory debugging  etc. For  curl-developers
		only.

	    ECH

		ECH support is present.

	    gsasl

		The  built-in  SASL   authentication  includes  extensions   to
		support SCRAM because libcurl was built with libgsasl.

	    GSS-API

		GSS-API is supported.

	    HSTS

		HSTS support is present.

	    HTTP2

		HTTP/2 support has been built-in.

	    HTTP3

		HTTP/3 support has been built-in.

	    HTTPS-proxy

		This curl is built to support HTTPS proxy.

	    IDN

		This curl supports IDN - international domain names.

	    IPv6

		You can use IPv6 with this.

	    Kerberos

		Kerberos V5 authentication is supported.

	    Largefile

		This curl supports transfers of large files, files larger  than
		2GB.

	    libz

		Automatic  decompression  (via  gzip,  deflate)  of  compressed
		files over HTTP is supported.

	    MultiSSL

		This curl supports multiple TLS backends.

	    NTLM

		NTLM authentication is supported.

	    NTLM_WB

		NTLM delegation to  winbind helper is  supported. This  feature
		was removed from curl in 8.8.0.

	    PSL

		PSL is short for  Public Suffix List  and means that this  curl
		has been built with knowledge about "public suffixes".

	    SPNEGO

		SPNEGO authentication is supported.

	    SSL

		SSL versions  of  various  protocols  are  supported,  such  as
		HTTPS, FTPS, POP3S and so on.

	    SSLS-EXPORT

		This build supports  TLS session export/import,  like with  the
		--ssl-sessions.

	    SSPI

		SSPI is supported.

	    TLS-SRP

		SRP (Secure Remote  Password) authentication  is supported  for
		TLS.

	    Unicode

		Unicode support on Windows.

	    UnixSockets

		Unix sockets support is provided.

	    zstd

		Automatic decompression  (via zstd)  of compressed  files  over
		HTTP is supported.

	    Example:
	     curl --version

	    See also --help and --manual.

    --vlan-priority <priority>
	    Set VLAN priority as defined in IEEE 802.1Q.

	    This field is set on Ethernet level, and only works within  a local
	    network.

	    The valid range  for <priority> is  0 to  7. If --vlan-priority  is
	    provided several times, the last set value is used.

	    Example:
	     curl --vlan-priority 4 https://example.com

	    Added in 8.9.0. See also --ip-tos.

    -w, --write-out <format>
	    Make  curl  display  information   on  stdout  after  a   completed
	    transfer. The format is a string that may contain plain  text mixed
	    with any  number of variables.  The format  can be  specified as  a
	    literal "string", or you can have curl read the format from  a file
	    with "@filename" and  to tell curl  to read  the format from  stdin
	    you write "@-".

	    The variables present in the  output format are substituted by  the
	    value or  text  that  curl  thinks fit,  as  described  below.  All
	    variables are specified as %{variable_name} and to output a  normal
	    % you write them  as %%. You  can output a newline  by using \n,  a
	    carriage return with \r and a tab space with \t.

	    The output is  by default written  to standard  output, but can  be
	    changed with %{stderr} and %output{}.

	    Output HTTP header  values from the  transfer's most recent  server
	    response by using %header{name} where name is the case  insensitive
	    name of  the  header  (without  the  trailing  colon).  The  header
	    contents are  exactly  as  delivered  over  the  network  but  with
	    leading and trailing  whitespace and newlines  stripped off  (added
	    in 7.84.0).

	    Select a specific target destination  file to write the output  to,
	    by using  %output{name} (added  in curl  8.3.0) where  name is  the
	    full filename.  The  output  following  that  instruction  is  then
	    written to that file.  More than one  %output{} instruction can  be
	    specified in the  same write-out argument.  If the filename  cannot
	    be created,  curl leaves  the output  destination to  the one  used
	    prior to the %output{}  instruction. Use %output{>>name} to  append
	    data to an existing file.

	    This output  is done  independently  of if  the file  transfer  was
	    successful or not.

	    If the specified action or output specified with this option  fails
	    in any way, it does not make curl return a (different) error.

	    NOTE: On Windows, the %-symbol  is a special symbol used to  expand
	    environment variables. In  batch files, all  occurrences of %  must
	    be doubled  when using  this  option to  properly escape.  If  this
	    option is used at the command  prompt then the % cannot be  escaped
	    and unintended expansion is possible.

	    The variables available are:

	    certs

		Output the certificate  chain with details.  Supported only  by
		the OpenSSL, GnuTLS,  Schannel and Rustls  backends. (Added  in
		7.88.0)

	    conn_id

		The connection  identifier  last  used  by  the  transfer.  The
		connection id is unique number among all connections using  the
		same connection cache. (Added in 8.2.0)

	    content_type

		The Content-Type of the requested document, if there was any.

	    errormsg

		The error message. (Added in 7.75.0)

	    exitcode

		The numerical exit code of the transfer. (Added in 7.75.0)

	    filename_effective

		The ultimate filename  that curl  writes out to.  This is  only
		meaningful if  curl  is  told  to  write to  a  file  with  the
		--remote-name  or  --output  option.  It  is  most  useful   in
		combination with the --remote-header-name option.

	    ftp_entry_path

		The initial  path  curl ended  up in  when  logging on  to  the
		remote FTP server.

	    header{name}

		The value  of header  "name" from  the transfer's  most  recent
		server response.  Unlike  other variables,  the  variable  name
		"header" is not in  braces. For example "%header{date}".  Refer
		to --write-out remarks. (Added in 7.84.0)

		Starting with 8.17.0, output the contents of all header  fields
		using a specific name  - even for  a whole redirect "chain"  by
		appending  ":all:[separator]"   to   the   header   name.   The
		"[separator]" string  (if  not  blank) is  output  between  the
		headers if there are more  than one. When more than one  header
		is shown,  they  are  output  in  the  chronological  order  of
		appearance over the  wire. To  include a close  brace ("}")  in
		the separator, escape it with a backslash: "\}".

	    header_json

		A JSON object with  all HTTP response  headers from the  recent
		transfer. Values are provided as  arrays, since in the case  of
		multiple headers  there  can  be  multiple  values.  (Added  in
		7.83.0)

		The header  names provided  in lowercase,  listed in  order  of
		appearance over the wire.  Except for duplicated headers.  They
		are grouped on the first occurrence of that header, each  value
		is presented in the JSON array.

	    http_code

		The  numerical  response  code  that  was  found  in  the  last
		retrieved HTTP(S) or FTP(s) transfer.

	    http_connect

		The numerical code that was found in the last response  (from a
		proxy) to a curl CONNECT request.

	    http_version

		The http version that was effectively used.

	    json

		A JSON  object with  all available  keys except  "header_json".
		(Added in 7.70.0)

	    local_ip

		The IP  address of  the local  end of  the  most recently  done
		connection - can be either IPv4 or IPv6.

	    local_port

		The local port number of the most recently done connection.

	    method

		The http method used  in the most  recent HTTP request.  (Added
		in 7.72.0)

	    num_certs

		Number of server  certificates received in  the TLS  handshake.
		Supported only  by the  OpenSSL,  GnuTLS, Schannel  and  Rustls
		backends. (Added in 7.88.0)

	    num_connects

		Number of new connects made in the recent transfer.

	    num_headers

		The number  of  response headers  in  the most  recent  request
		(restarted at each redirect). Note that the status line IS  NOT
		a header. (Added in 7.73.0)

	    num_redirects

		Number of redirects that were followed in the request.

	    num_retries

		Number of retries  actually performed when  "--retry" has  been
		used. (Added in 8.9.0)

	    onerror

		The rest of the output  is only shown if the transfer  returned
		a non-zero error. (Added in 7.75.0)

	    output{filename}

		From this point on,  the --write-out output  is written to  the
		filename specified  in braces.  The  filename can  be  prefixed
		with ">>" to append  to the file.  Unlike other variables,  the
		variable  name  "output"   is  not  in   braces.  For   example
		"%output{>>stats.txt}". Refer  to --write-out  remarks.  (Added
		in 8.3.0)

	    proxy_ssl_verify_result

		The  result  of   the  HTTPS  proxy's   SSL  peer   certificate
		verification that was requested.  0 means the verification  was
		successful.

	    proxy_used

		Returns 1 if the previous  transfer used a proxy, otherwise  0.
		Useful to for example determine if a "NOPROXY" pattern  matched
		the hostname or not. (Added in 8.7.0)

	    redirect_url

		When an  HTTP request  was made  without --location  to  follow
		redirects (or when  --max-redirs is met),  this variable  shows
		the actual URL a redirect would have gone to.

	    referer

		The Referer: header, if there was any. (Added in 7.76.0)

	    remote_ip

		The remote IP address  of the most  recently done connection  -
		can be either IPv4 or IPv6.

	    remote_port

		The remote port number of the most recently done connection.

	    response_code

		The  numerical  response  code  that  was  found  in  the  last
		transfer (formerly known as "http_code").

	    scheme

		The  URL   scheme   (sometimes  called   protocol)   that   was
		effectively used.

	    size_download

		The total amount  of bytes  that were downloaded.  This is  the
		size of the body/data that was transferred, excluding headers.

	    size_header

		The total amount of bytes of the downloaded headers.

	    size_request

		The total amount of bytes that were sent in the HTTP request.

	    size_upload

		The total amount of bytes that were uploaded. This is  the size
		of the body/data that was transferred, excluding headers.

	    speed_download

		The average download speed that curl measured for the  complete
		download. Bytes per second.

	    speed_upload

		The average upload  speed that curl  measured for the  complete
		upload. Bytes per second.

	    ssl_verify_result

		The result of  the SSL peer  certificate verification that  was
		requested. 0 means the verification was successful.

	    stderr

		From this  point  on,  the --write-out  output  is  written  to
		standard error.

	    stdout

		From this  point  on,  the --write-out  output  is  written  to
		standard output.  This  is the  default,  but can  be  used  to
		switch back after switching to stderr.

	    time{format}

		Output the  current UTC  time  using "strftime()"  format.  See
		TIME OUTPUT FORMAT below for details. (Added in 8.16.0)

	    time_appconnect

		The  time, in  seconds,  it  took  from  the  start  until  the
		SSL/SSH/etc  connect/handshake   to   the   remote   host   was
		completed.

	    time_connect

		The time,  in seconds, it  took from  the start  until the  TCP
		connect to the remote host (or proxy) was completed.

	    time_namelookup

		The time, in  seconds, it took  from the  start until the  name
		resolving was completed.

	    time_posttransfer

		The time, in  seconds, it took  from the  start until the  last
		byte is sent by libcurl. (Added in 8.10.0)

	    time_pretransfer

		The time, in seconds, it took from the start until  immediately
		before the file transfer was about to begin. This includes  all
		pre-transfer commands  and negotiations  that are  specific  to
		the particular protocol(s) involved.

	    time_queue

		The time, in seconds, the  transfer was queued during its  run.
		This adds the queue time  for each redirect step that may  have
		happened. Transfers may  be queued for  significant amounts  of
		time when connection  or parallel limits  are in place.  (Added
		in 8.12.0)

	    time_redirect

		The time,  in  seconds,  it  took  for  all  redirection  steps
		including  name  lookup,  connect,  pretransfer  and   transfer
		before  the  final  transaction  was  started.  "time_redirect"
		shows the complete execution time for multiple redirections.

	    time_starttransfer

		The time, in seconds,  it took from  the start until the  first
		byte was received. This includes time_pretransfer and also  the
		time the server needed to calculate the result.

	    time_total

		The total time, in seconds, that the full operation lasted.

	    tls_earlydata

		The amount of bytes that were sent as TLSv1.3 early  data. This
		is 0 if this TLS feature was not used and negative if  the data
		sent had been rejected by the server. The use of early  data is
		enabled via the command  line option "--tls-earlydata".  (Added
		in 8.12.0)

	    url

		The URL that was fetched. (Added in 7.75.0)

	    url.scheme

		The scheme part of the URL that was fetched. (Added in 8.1.0)

	    url.user

		The user part of the URL that was fetched. (Added in 8.1.0)

	    url.password

		The password  part  of the  URL  that was  fetched.  (Added  in
		8.1.0)

	    url.options

		The options part of the URL that was fetched. (Added in 8.1.0)

	    url.host

		The host part of the URL that was fetched. (Added in 8.1.0)

	    url.port

		The port number of the URL that was fetched. If no  port number
		was specified  and  the  URL scheme  is  known,  that  scheme's
		default port number is shown. (Added in 8.1.0)

	    url.path

		The path part of the URL that was fetched. (Added in 8.1.0)

	    url.query

		The query part of the URL that was fetched. (Added in 8.1.0)

	    url.fragment

		The fragment  part  of the  URL  that was  fetched.  (Added  in
		8.1.0)

	    url.zoneid

		The zone id part of the URL that was fetched. (Added in 8.1.0)

	    urle.scheme

		The scheme part of the  effective (last) URL that was  fetched.
		(Added in 8.1.0)

	    urle.user

		The user part  of the  effective (last) URL  that was  fetched.
		(Added in 8.1.0)

	    urle.password

		The  password  part  of  the  effective  (last)  URL  that  was
		fetched. (Added in 8.1.0)

	    urle.options

		The options part of the effective (last) URL that was  fetched.
		(Added in 8.1.0)

	    urle.host

		The host part  of the  effective (last) URL  that was  fetched.
		(Added in 8.1.0)

	    urle.port

		The port number of the  effective (last) URL that was  fetched.
		If no port number was  specified, but the URL scheme is  known,
		that scheme's default port number is shown. (Added in 8.1.0)

	    urle.path

		The path part  of the  effective (last) URL  that was  fetched.
		(Added in 8.1.0)

	    urle.query

		The query part of  the effective (last)  URL that was  fetched.
		(Added in 8.1.0)

	    urle.fragment

		The  fragment  part  of  the  effective  (last)  URL  that  was
		fetched. (Added in 8.1.0)

	    urle.zoneid

		The zone id part of the effective (last) URL that  was fetched.
		(Added in 8.1.0)

	    urlnum

		The URL  index number  of this  transfer, 0-indexed.  Unglobbed
		URLs share the  same index  number as the  origin globbed  URL.
		(Added in 7.75.0)

	    url_effective

		The URL that was fetched  last. This is most meaningful if  you
		have told curl to follow location: headers.

	    xfer_id

		The numerical identifier of  the last transfer  done. -1 if  no
		transfer has been started yet  for the handle. The transfer  id
		is  unique  among  all  transfers  performed  using  the   same
		connection cache. (Added in 8.2.0)

	    TIME OUTPUT FORMAT

	    To show time with  "%time{}" the characters  within "{}" creates  a
	    special format string that may contain special character  sequences
	    called conversion  specifications.  Each  conversion  specification
	    starts with "%" and is followed by a character that  instructs curl
	    to output a particular time  detail. All other characters used  are
	    displayed as-is and-

	    The following conversion specification are available:

	    %a

		The abbreviated name of  the day of  the week according to  the
		current locale.

	    %A

		The full name of the day  of the week according to the  current
		locale.

	    %b

		The abbreviated month name according to the current locale.

	    %B

		The full month name according to the current locale.

	    %c

		The preferred  date and  time  representation for  the  current
		locale. (In the POSIX  locale this is  equivalent to "%a %b  %e
		%H:%M:%S %Y".)

	    %C

		The century number (year/100) as a 2-digit integer.

	    %d

		The day of the month as a decimal number (range 01 to 31).

	    %D

		Equivalent  to  "%m/%d/%y".  In  international  contexts,  this
		format is ambiguous and should be avoided.)

	    %e

		Like "%d", the  day of  the month  as a decimal  number, but  a
		leading zero is replaced by a space.

	    %f

		The number  of  microseconds  elapsed of  the  current  second.
		(This a curl special code and not a standard one.)

	    %F

		Equivalent to "%Y-%m-%d" (the ISO 8601 date format).

	    %G

		The ISO 8601 week-based year with century as a decimal  number.
		The 4-digit  year corresponding  to the  ISO week  number  (see
		"%V"). This has the same format and value as "%Y",  except that
		if the ISO week  number belongs to  the previous or next  year,
		that year is used instead.

	    %g

		Like "%G", but without  century, that is,  with a 2-digit  year
		(00-99).

	    %h

		Equivalent to "%b".

	    %H

		The hour as a  decimal number using  a 24-hour clock (range  00
		to 23).

	    %I

		The hour as a  decimal number using  a 12-hour clock (range  01
		to 12).

	    %j

		The day of the year as a decimal number (range 001 to 366).

	    %k

		The hour (24-hour clock) as  a decimal number (range 0 to  23);
		single digits are preceded by a blank.

	    %l

		The hour (12-hour clock) as  a decimal number (range 1 to  12);
		single digits are preceded by a blank.

	    %m

		The month as a decimal number (range 01 to 12).

	    %M

		The minute as a decimal number (range 00 to 59).

	    %p

		Either "AM" or "PM" according  to the given time value, or  the
		corresponding strings for the  current locale. Noon is  treated
		as "PM" and midnight as "AM".

	    %P

		Like "%p" but  in lowercase:  "am" or "pm"  or a  corresponding
		string for the current locale.

	    %r

		The time in am or pm notation.

	    %R

		The  time  in  24-hour   notation  ("%H:%M").  For  a   version
		including the seconds, see "%T" below.

	    %s

		The number  of seconds  since  the Epoch,  1970-01-01  00:00:00
		+0000 (UTC).

	    %S

		The second as a decimal number (range 00 to 60). (The  range is
		up to 60 to  allow for occasional  leap seconds.) See "%f"  for
		microseconds.

	    %T

		The time in 24-hour notation ("%H:%M:%S").

	    %u

		The day of the  week as a decimal, range  1 to 7, Monday  being
		1.

	    %U

		The week number of the current year as a decimal  number, range
		00 to 53, starting  with the first Sunday  as the first day  of
		week 01. See also "%V" and "%W".

	    %V

		The ISO 8601 week number (see  NOTES) of the current year as  a
		decimal number, range 01 to 53, where week 1 is the  first week
		that has at  least 4 days in  the new year.  See also "%U"  and
		"%W".

	    %w

		The day of the  week as a decimal, range  0 to 6, Sunday  being
		0. See also "%u".

	    %W

		The week number of the current year as a decimal  number, range
		00 to 53, starting  with the first Monday  as the first day  of
		week 01.

	    %x

		The  preferred  date  representation  for  the  current  locale
		without the time.

	    %X

		The  preferred  time  representation  for  the  current  locale
		without the date.

	    %y

		The year as  a decimal number  without a  century (range 00  to
		99).

	    %Y

		The year as a decimal number including the century.

	    %z

		The "+hhmm" or "-hhmm" numeric timezone (that is, the hour  and
		minute offset from UTC).  As time is  always UTC, this  outputs
		"+0000".

	    %Z

		The timezone name. For some reason "GMT".

	    %%

		A literal "%" character.

	    If --write-out is  provided several  times, the last  set value  is
	    used.

	    Example:
	     curl -w '%{response_code}\n' https://example.com

	    See also --verbose and --head.

    --xattr
	    Store metadata in the extended file attributes.

	    When saving output to a file,  tell curl to store file metadata  in
	    extended file  attributes.  Currently,  "curl"  is  stored  in  the
	    "creator" attribute,  the URL  is  stored in  the  "xdg.origin.url"
	    attribute  and, for  HTTP,  the  content  type  is  stored  in  the
	    "mime_type"  attribute.  If  the  file  system  does  not   support
	    extended  attributes,  a  warning  is  issued.  Providing   --xattr
	    multiple  times  has  no  extra  effect.  Disable  it  again   with
	    --no-xattr.

	    Example:
	     curl --xattr -o storage https://example.com

	    See also --remote-time, --write-out and --verbose.

FILES

    ~/.curlrc

    Default config file, see --config for details.

ENVIRONMENT

    The environment variables  can be specified  in lower  case or upper  case.
    The lower case version has  precedence. "http_proxy" is an exception as  it
    is only available in lower case.

    Using an  environment variable  to set  the proxy  has the  same effect  as
    using the --proxy option.

    http_proxy [protocol://]<host>[:port]

	Sets the proxy server to use for HTTP.

    HTTPS_PROXY [protocol://]<host>[:port]

	Sets the proxy server to use for HTTPS.

    [url-protocol]_PROXY [protocol://]<host>[:port]

	Sets the proxy server to use for [url-protocol], where the  protocol is
	a protocol that  curl supports and  as specified in  a URL. FTP,  FTPS,
	POP3, IMAP, SMTP, LDAP, etc.

    ALL_PROXY [protocol://]<host>[:port]

	Sets the proxy server to use if no protocol-specific proxy is set.

    NO_PROXY <comma-separated list of hosts/domains>

	list of hostnames that  should not go through any  proxy. If set to  an
	asterisk '*' only,  it matches  all hosts.  Each name in  this list  is
	matched as either  a domain name  which contains  the hostname, or  the
	hostname itself.

	This  environment  variable  disables  use  of  the  proxy  even   when
	specified with the --proxy option. That is

	    NO_PROXY=direct.example.com curl -x http://proxy.example.com
	    https://direct.example.com

	accesses the target URL directly, and

	    NO_PROXY=direct.example.com curl -x http://proxy.example.com
	    https://somewhere.example.com

	accesses the target URL through the proxy.

	The list  of hostnames  can also  include numerical  IP addresses,  and
	IPv6 versions should then be given without enclosing brackets.

	IP addresses can be  specified using CIDR  notation: an appended  slash
	and number specifies the  number of "network  bits" out of the  address
	to  use   in   the   comparison  (added   in   7.86.0).   For   example
	"192.168.0.0/16" would match all addresses starting with "192.168".

    APPDATA <directory>

	On Windows,  this  variable  is  used  when trying  to  find  the  home
	directory. If the primary home variables are all unset.

    COLUMNS <terminal width>

	If set,  the specified number  of characters  is used  as the  terminal
	width when  the alternative  progress-bar is  shown. If  not set,  curl
	tries to figure it out using other ways.

    CURL_CA_BUNDLE <file>

	If set, it is used as the --cacert value. This environment  variable is
	ignored if Schannel is used as the TLS backend.

    CURL_HOME <directory>

	If set, is the first variable curl checks when trying to find  its home
	directory. If not set, it continues to check XDG_CONFIG_HOME

    CURL_SSL_BACKEND <TLS backend>

	If curl  was built with  support for  "MultiSSL", meaning  that it  has
	built-in support  for  more  than one  TLS  backend,  this  environment
	variable can  be set to  the case  insensitive name  of the  particular
	backend to  use when curl  is invoked.  Setting a  name that  is not  a
	built-in alternative makes curl stay with the default.

	SSL  backend  names   (case-insensitive):  gnutls,  mbedtls,   openssl,
	rustls, schannel, wolfssl

    HOME <directory>

	If set, this is  used to find the home  directory when that is  needed.
	Like  when   looking   for   the   default   .curlrc.   CURL_HOME   and
	XDG_CONFIG_HOME have preference.

    NETRC <path>

	If set, this is used to find the ".netrc" file. It overrides  all other
	netrc file  location mechanisms  and should  be set  to  the full  file
	path. (Added in curl 8.16.0)

    QLOGDIR <directory>

	If curl  was  built  with  HTTP/3  support,  setting  this  environment
	variable  to a  local  directory  makes  curl  produce  qlogs  in  that
	directory, using file names named  after the destination connection  id
	(in hex). Do note that these files can become rather large.  Works with
	the ngtcp2 and quiche QUIC backends.

    SHELL

	Used on VMS when trying to detect if using a DCL or a Unix shell.

    SSL_CERT_DIR <directory>

	If set, it is used as the --capath value. This environment  variable is
	ignored if Schannel is used as the TLS backend.

    SSL_CERT_FILE <path>

	If set, it is used as the --cacert value. This environment  variable is
	ignored if Schannel is used as the TLS backend.

    SSLKEYLOGFILE <path>

	If you set  this environment variable  to a  filename, curl stores  TLS
	secrets from its connections  in that file  when invoked to enable  you
	to analyze the TLS traffic  in real time using network analyzing  tools
	such  as  Wireshark.  This  works  with  the  following  TLS  backends:
	OpenSSL,  LibreSSL  (TLS  1.2  max),  BoringSSL,  GnuTLS,  wolfSSL  and
	Rustls.

    USERPROFILE <directory>

	On Windows,  this  variable  is  used  when trying  to  find  the  home
	directory. If  the other,  primary, variables  are all  unset. If  set,
	curl uses the path "$USERPROFILE\Application Data".

    XDG_CONFIG_HOME <directory>

	If CURL_HOME is not  set, this variable is  checked when looking for  a
	default .curlrc file.

PROXY PROTOCOL PREFIXES

    The proxy  string may be  specified with  a protocol://  prefix to  specify
    alternative proxy protocols.

    If no protocol is specified in the  proxy string or if the string does  not
    match a supported one, the proxy is treated as an HTTP proxy.

    The supported proxy protocol prefixes are as follows:

    http://

	Makes it use it as  an HTTP proxy. The  default if no scheme prefix  is
	used.

    https://

	Makes it treated as an HTTPS proxy.

    socks4://

	Makes it the equivalent of --socks4

    socks4a://

	Makes it the equivalent of --socks4a

    socks5://

	Makes it the equivalent of --socks5

    socks5h://

	Makes it the equivalent of --socks5-hostname

EXIT CODES

    There are a bunch  of different error  codes and their corresponding  error
    messages that  may  appear under  error conditions.  At  the time  of  this
    writing, the exit codes are:

    0

	Success.  The  operation  completed   successfully  according  to   the
	instructions.

    1

	Unsupported protocol.  This  build of  curl  has no  support  for  this
	protocol.

    2

	Failed to initialize.

    3

	URL malformed. The syntax was not correct.

    4

	A feature or option that was needed to perform the desired  request was
	not enabled  or was  explicitly disabled  at build-time.  To make  curl
	able to do this, you probably need another build of libcurl.

    5

	Could not resolve proxy. The given proxy host could not be resolved.

    6

	Could not resolve host. The given remote host could not be resolved.

    7

	Failed to connect to host.

    8

	Weird server reply. The server sent data curl could not parse.

    9

	FTP access  denied. The server  denied login  or denied  access to  the
	particular resource or directory  you wanted to  reach. Most often  you
	tried to change to a directory that does not exist on the server.

    10

	FTP accept failed. While  waiting for the  server to connect back  when
	an active FTP session is used, an error code was sent over  the control
	connection or similar.

    11

	FTP weird PASS reply. curl could  not parse the reply sent to the  PASS
	request.

    12

	During an active FTP  session while waiting  for the server to  connect
	back to curl, the timeout expired.

    13

	FTP weird PASV reply, curl could  not parse the reply sent to the  PASV
	request.

    14

	FTP weird  227 format. curl  could not  parse the  227-line the  server
	sent.

    15

	FTP cannot  use host.  Could not  resolve the  host IP  we  got in  the
	227-line.

    16

	HTTP/2 error. A problem was  detected in the HTTP2 framing layer.  This
	is somewhat generic  and can be  one out of  several problems, see  the
	error message for details.

    17

	FTP could not set binary. Could not change transfer method to binary.

    18

	Partial file. Only a part of the file was transferred.

    19

	FTP could not  download/access the  given file, the  RETR (or  similar)
	command failed.

    21

	FTP quote error. A quote command returned error from the server.

    22

	HTTP page not retrieved.  The requested URL  was not found or  returned
	another error with the HTTP error code being 400 or above.  This return
	code only appears if --fail is used.

    23

	Write error.  curl could  not  write data  to a  local file  system  or
	similar.

    25

	Failed starting the upload.  For FTP, the  server typically denied  the
	STOR command.

    26

	Read error. Various reading problems.

    27

	Out of memory. A memory allocation request failed.

    28

	Operation timeout. The specified time-out period was reached  according
	to the conditions.

    30

	FTP PORT failed. The PORT  command failed. Not all FTP servers  support
	the PORT command, try doing a transfer using PASV instead.

    31

	FTP could not use REST. The  REST command failed. This command is  used
	for resumed FTP transfers.

    33

	HTTP range error. The range "command" did not work.

    34

	HTTP post error. Internal post-request generation error.

    35

	SSL connect error. The SSL handshaking failed.

    36

	Bad download resume. Could not continue an earlier aborted download.

    37

	FILE could not read file. Failed to open the file. Permissions?

    38

	LDAP cannot bind. LDAP bind operation failed.

    39

	LDAP search failed.

    41

	Function not found. A required LDAP function was not found.

    42

	Aborted by callback. An application told curl to abort the operation.

    43

	Internal error. A function was called with a bad parameter.

    45

	Interface error. A specified outgoing interface could not be used.

    47

	Too many  redirects. When  following redirects,  curl hit  the  maximum
	amount.

    48

	Unknown option specified to libcurl.  This indicates that you passed  a
	weird option to curl that was  passed on to libcurl and rejected.  Read
	up in the manual.

    49

	Malformed telnet option.

    52

	The server did not reply anything, which here is considered an error.

    53

	SSL crypto engine not found.

    54

	Cannot set SSL crypto engine as default.

    55

	Failed sending network data.

    56

	Failure in receiving network data.

    58

	Problem with the local certificate.

    59

	Could not use specified SSL cipher.

    60

	Peer certificate cannot be authenticated with known CA certificates.

    61

	Unrecognized transfer encoding.

    63

	Maximum file size exceeded.

    64

	Requested FTP SSL level failed.

    65

	Sending the data requires a rewind that failed.

    66

	Failed to initialize SSL Engine.

    67

	The username, password, or similar was not accepted and curl  failed to
	log in.

    68

	File not found on TFTP server.

    69

	Permission problem on TFTP server.

    70

	Out of disk space on TFTP server.

    71

	Illegal TFTP operation.

    72

	Unknown TFTP transfer ID.

    73

	File already exists (TFTP).

    74

	No such user (TFTP).

    77

	Problem reading the SSL CA cert (path? access rights?).

    78

	The resource referenced in the URL does not exist.

    79

	An unspecified error occurred during the SSH session.

    80

	Failed to shut down the SSL connection.

    82

	Could not load CRL file, missing or wrong format.

    83

	Issuer check failed.

    84

	The FTP PRET command failed.

    85

	Mismatch of RTSP CSeq numbers.

    86

	Mismatch of RTSP Session Identifiers.

    87

	Unable to parse FTP file list.

    88

	FTP chunk callback reported error.

    89

	No connection available, the session is queued.

    90

	SSL public key does not match pinned public key.

    91

	Invalid SSL certificate status.

    92

	Stream error in HTTP/2 framing layer.

    93

	An API function was called from inside a callback.

    94

	An authentication function returned an error.

    95

	A problem was detected  in the HTTP/3  layer. This is somewhat  generic
	and can  be one  out of  several problems,  see the  error message  for
	details.

    96

	QUIC connection  error. This  error may  be caused  by  an SSL  library
	error. QUIC is the protocol used for HTTP/3 transfers.

    97

	Proxy handshake error.

    98

	A client-side certificate is required to complete the TLS handshake.

    99

	Poll or select returned fatal error.

    100

	A value or data field grew larger than allowed.

    XX

	More error codes  might appear  here in future  releases. The  existing
	ones are meant to never change.

BUGS

    If you experience any problems with curl, submit an issue in  the project's
    bug tracker on GitHub: https://github.com/curl/curl/issues

AUTHORS

    Daniel Stenberg is the main author,  but the whole list of contributors  is
    found in the separate THANKS file.

WWW

    https://curl.se/

SEE ALSO

    ftp(1), wget(1)

