Author: Oxford University Computing Services, 13 Banbury Road, Oxford OX2 6NN, United Kingdom

| ## Sourceforge
# JadeTeX

## Contents

## JadeTeX

This is a TeX macro package for processing the output from Jade/OpenJade in TeX (-t) mode. You can download it from Sourceforge; `http://sourceforge.net/projects/jadetex/`.

## Installation

### Introduction

This documents is based on a note by FC describing his experience installing JadeTeX with OpenJade 1.3 and teTeX 1.06 (on Unix). It has since been expanded and checked by SR and SP. It is aimed to people who have perhaps some experience using TeX and LaTeX, enough to write up technical reports using simple macros, but know little or nothing about format files or the particulars of the TeX distribution structure, and consequently have a rough time with JadeTeX…

This document relates to JadeTeX version 2.11 or later.

To use JadeTeX, you first of all should compile and install OpenJade. The resulting openjade executable, used with the `-t tex` flag, will format an SGML/XML file and yield a TeX output file. Using jadetex or pdfjadetex, you can transform this into DVI or PDF; from DVI, you can use a program like dvips to get PostScript output. This note describes how to build and install the former two programs, jadetex and pdfjadetex.

### Increasing TeX capacities

The TeX output file uses a macro package, JadeTeX, built on top of LaTeX, just as LaTeX is a macro package sitting on top of plain TeX. It is probably possible to just stick an `\input` at the top of your `.tex` file and use the JadeTeX macros this way, but that would be slow since TeX would need to parse and compile the macro definitions every time you format your `.tex` file. So what we do instead is to use TeX (actually, initex) to read in the LaTeX format, followed by the JadeTeX package, once, and dump the compiled image to what is called a ‘format file.’ This is the same way that LaTeX is usually employed. Once the format file is built and installed, it is easy to arrange for TeX to read it in quickly and automatically when you process a `.tex` file.

But, as ever, there are complications, relating to TeX's capacity restrictions. TeX is designed to use a fixed amount of resources to process documents; for example, there is a maximum number of strings that can be allocated, and a maximum stack size. If a processing run exceeds the default limits, TeX will complain and refuse to continue. Unfortunately, OpenJade's TeX backend tends to exceed these default limits.

Fortunately, though, there is no need to recompile your TeX binary. If you are using teTeX (or any other Web2c-based distribution) there will be a file called `texmf.cnf` in your installation which sets the capacity parameters and is consulted every time TeX is run. By adding the right parameter settings here, you can ensure that JadeTeX will be unlikely to run out of memory.

Where is `texmf.cnf`? You can find it in the `web2c` directory under your `texmf` tree... which begs the question, where is `texmf`? The most straightforward way to find it is to make sure all the TeX executables are in your `PATH`; then do: `kpsewhich -expand-var '$TEXMFMAIN'` `/usr/share/texmf/web2c/texmf.cnf` and it will respond with the location of your texmf tree. As you can see, it is also known as `$TEXMFMAIN`, which is how I shall refer to it in the sequel.

If for some reason kpsewhich is not in your `PATH`, and you don't know where it is, here are some likely locations:

- `/usr/share/texmf`
- `/usr/local/share/texmf`
- `/usr/local/teTeX/texmf`
- `/usr/local/lib/teTeX/texmf`
- `/usr/local/lib/texmf`
- `/usr/lib/texmf`
- `/usr/lib/teTeX/texmf`

In a minute we are going to modify `texmf.cnf` to increase the capacities, then build the JadeTeX format file and install the JadeTeX executable(s). You may have a command hugelatex, a version of latex with greater capacity settings than the usual one, which is named simply latex. If so, build your format file using hugelatex rather than latex, so that JadeTeX inherits the `huge' settings. Otherwise, make sure your latex is big. In addition, if you make any changes to the literate source of the JadeTeX macro package (see below), a normal latex may not do.

First we need to update texmf.cnf to ensure that latex really is huge. Take a look at the top of the file. It will probably say:

    %original texmf.cnf -- runtime path configuration file for kpathsea.
    % (If you change or delete `original' on the previous line, the
    % distribution won't install its version over yours.)

If it says

    % TeX Live texmf.cnf

then you can skip all this and proceed to the next section, as TeX Live is already set up for JadeTeX

If you have an `original', follow those directions and delete the string `original` to ensure that future upgrades won't obliterate your changes.

In the latter half of the file, you will find the capacity settings, which look something like this:

    pool_size = 125000
    pool_size.context = 750000

Here, `pool_size` is the name of the parameter in both cases, but the second one is qualified with `.context`, which indicates that this setting will be preferred when using the ConTeXt macro package. We need to make similar accomodations not only for latex but also jadetex and pdfjadetex. Unfortunately, we don't know the minimal required values for every parameter and some of these values are probably ridiculously high, but no matter ...

    % latex settings
    main_memory.latex = 1100000
    param_size.latex = 1500
    stack_size.latex = 1500
    hash_extra.latex = 15000
    string_vacancies.latex = 45000
    pool_free.latex = 47500
    nest_size.latex = 500
    save_size.latex = 5000
    pool_size.latex = 500000
    max_strings.latex = 55000
    font_mem_size.latex= 400000

    % jadetex & pdfjadetex
    main_memory.jadetex = 1500000
    param_size.jadetex = 1500
    stack_size.jadetex = 1500
    hash_extra.jadetex = 50000
    string_vacancies.jadetex = 45000
    pool_free.jadetex = 47500
    nest_size.jadetex = 500
    save_size.jadetex = 5000
    pool_size.jadetex = 500000
    max_strings.jadetex = 55000

    main_memory.pdfjadetex = 2500000
    param_size.pdfjadetex = 1500
    stack_size.pdfjadetex = 1500
    hash_extra.pdfjadetex = 50000
    string_vacancies.pdfjadetex = 45000
    pool_free.pdfjadetex = 47500
    nest_size.pdfjadetex = 500
    save_size.pdfjadetex = 5000
    pool_size.pdfjadetex = 500000
    max_strings.pdfjadetex = 55000

Add these to the end of the file, or wherever makes you happy.

Now let's build some format files. Under `$TEXMFMAIN/tex/latex/config`, you will find the files necessary to rebuild latex. Copy them somewhere temporary and go there:

    cp -R /usr/share/texmf/tex/latex/config /tmp
    cd /tmp/config

Now do this:

    tex -ini -progname=latex latex.ini

This will produce a file `latex.fmt` in the same directory. Become root and put it in `$TEXMFMAIN/web2c`. This is where all the format files are kept. (You can delete the other copied files from `config` afterwards.)

    mv latex.fmt /usr/share/texmf/web2c

Now just create a symbolic link from tex to latex:

    ln -s /usr/bin/tex /usr/local/bin/latex

When tex is invoked, it looks at the name `X` it was invoked with, then loads the format file `X.fmt` from `$TEXMFMAIN/web2c` before it starts processing the document. So creating this symbolic link is all that is needed to create the latex executable.

### Creating the format files

Next, take a look at your OpenJade distribution. Under the directory `dsssl` you will find the files necessary to build jadetex and pdfjadetex, including a Makefile. Now become root and just do:

    make  install

This creates `jadetex.fmt` and `pdfjadetex.fmt`, puts them in `$TEXMFMAIN/web2c` for you (using kpsewhich to find `$TEXMFMAIN`), and installs a few other auxiliary files under `$TEXMFMAIN/tex/jadetex`.

All that's left to do is to create the links:

    ln -s /usr/bin/tex /usr/bin/jadetex
    ln -s /usr/bin/pdftex /usr/bin/pdfjadetex

(changing the location of the binary directory to wherever your TeX is) and run mktexlsr so that your TeX distribution becomes aware of the newly installed files in `$TEXMFMAIN/tex/jadetex`.

    mktexlsr

### Testing the installation

Finally, test your installation using the demonstration files in that directory:

    openjade -t tex -d demo.dsl demo.sgm
    jadetex demo.tex
    pdfjadetex demo.tex

You're done!

### Frequently Asked Questions

I installed JadeTeX, but when I run it, it complains that a file named `unicode.sty` (or `dsssl.def`, etc) can't be found. What did I do wrong?
  You didn't run the mktexlsr, so kpathsea doesn't know about the newly installed files.
I don't like JadeTeX's default behavior in some situations. How do I modify it?
  If for some reason you want to modify the JadeTeX macro package, modify the file `jadetex.dtx`. This is the literate source for the format file and other files installed under `$TEXMFMAIN/tex/jadetex`. To format it, use latex:

      latex jadetex.dtx

  You will get tons of overfull hboxes but if you are using a nice big latex, it will work. Formatting the batch file `jadetex.ins` will produce stripped sources (`dsssl.def` and `jadetex.ltx`), which can be compiled into format files as before:

      latex jadetex.ins
      make -f Makefile.jadetex

What fonts can I use?
  Following is the names of the font families supported at the time of writing. Of course you must actually have these fonts installed to format the document (but not to produce the TeX output).
  - Arial
  - Helvetica
  - Palatino
  - Bookman
  - Courier
  - Symbol
  - Wingdings
  - WingDings
  - LucidaSans
  - LucidaBright
  - Savoy
  - ACaslon
  - Caslon
  - Formata
  - FranklinGothic
  - OCRAbyBT
  - AGaramond
  - Avant-Garde
  - Courier-New
  - New-Century-Schoolbook
  - Times-Roman
  - Trade-Gothic
  - Times-New-Roman
  - Times-NR-MT
  - Courier-New
  - Zapf-Dingbats
  - Gill-Sans
  - iso-serif
  - iso-sanserif
  - iso-monocase
  - LetterGothic12PitchBT
  - Monospace821
  - OCRB10PitchBT
  - OCR-A
  - OCR-B-10PitchBT
  - Computer-Modern-Typewriter
  - Computer-Modern-Sans
  - Computer-Modern
  - Computer-Modern-Caps-And-Small-Caps
Why doesn't hyphenation work?
  Remember that your text must be fully justified (`quadding: #t`), hyphenation must be on, `hyphenation?: #t`, and a current language must be selected (e.g., `language: 'EN`) for JadeTeX to perform hyphenation.
I'm using Norman Walsh's DocBook stylesheets and my footnotes are coming up at the end of the document rather than at the foot of each page. Why?
  The DocBook stylesheets need to be made aware that you are using the TeX backend. Add `-V tex-backend` to your openjade command-line.