660227a
 .
 FST4 and FST4W are designed particularly for the LF and MF bands. On these
 bands their fundamental sensitivities are better than other WSJT-X modes with
 the same sequence lengths, approaching the theoretical limits for their rates
 of information throughput. FST4 is optimized for two-way QSOs, while FST4W is
 for quasi-beacon transmissions of WSPR-style messages. FST4 and FST4W do not
 require the strict, independent time synchronization and phase locking of
 modes like EbNaut.
.
660224,660225c
 FT4 and FT8 are operationally similar but use T/R cycles only 7.5 and  15 s
 long, respectively.  MSK144 is designed for Meteor Scatter on the VHF bands.
.
660207,660222c
 WSJT-X implements amateur radio communication protocols or "modes" called
 FST4, FST4W, FT4, FT8, JT4, JT9, JT65, Q65, MSK144, and WSPR, as well as one
 called Echo for detecting and measuring your own radio signals reflected from
 the Moon.  These modes were all designed for making reliable, confirmed QSOs
 under extreme weak-signal conditions.
 .
 JT4, JT9, and JT65 use nearly identical message structure and source encoding
 (the efficient compression of standard messages used for minimal QSOs). They
 use timed 60-second T/R sequences synchronized with UTC.  JT4 and JT65 were
 designed for EME ("moonbounce") on the VHF/UHF/microwave bands.  JT9 is
 optimized for the MF, and HF bands.  It  is about 2 dB more sensitive than
 JT65 while using less than 10% of the bandwidth.  Q65 offers submodes with a
 wide range of T/R sequence lengths and tone spacings.
.
660205c
Description-md5: c1c0f02ccd1a9ef74ca17cbb509b9f2b
.
655106,655112d
654276,654286d
649535,649765d
633496,633521c

Package: trinityrnaseq
Description-md5: 2ee7f38dbb99a040c33d6619f4f5668b
Description-en: RNA-Seq De novo Assembly
 Trinity represents a novel method for the efficient and robust de novo
 reconstruction of transcriptomes from RNA-seq data. Trinity combines three
 independent software modules: Inchworm, Chrysalis, and Butterfly, applied
 sequentially to process large volumes of RNA-seq reads. Trinity partitions
 the sequence data into many individual de Bruijn graphs, each representing the
 transcriptional complexity at a given gene or locus, and then processes
 each graph independently to extract full-length splicing isoforms and to tease
 apart transcripts derived from paralogous genes.

Package: trinityrnaseq-examples
Description-md5: ed2dc144f88f410c79f957673eea79fb
Description-en: RNA-Seq De novo Assembly common example and testing files
 Trinity represents a novel method for the efficient and robust de novo
 reconstruction of transcriptomes from RNA-seq data. Trinity combines three
 independent software modules: Inchworm, Chrysalis, and Butterfly, applied
 sequentially to process large volumes of RNA-seq reads. Trinity partitions
 the sequence data into many individual de Bruijn graphs, each representing the
 transcriptional complexity at a given gene or locus, and then processes
 each graph independently to extract full-length splicing isoforms and to tease
 apart transcripts derived from paralogous genes.
 .
 This package contains testing & example files.
.
610355,610396d
602134,602163d
602125c
    such as SQLite, and big iron systems like PostgreSQL and MySQL.
.
602108c
Description-md5: c5607bf2f45f15916d662ded4ebfa5e2
.
589464a
Package: skales
Description-md5: 184aa410246465a9ad3a2533596c762b
Description-en: Boot image creation tools for qualcomm boards
 Scripts and tools used to build kernel images for some Qualcomm SoC
 based boards, such as DragonBoard 410c.
 .
 Tools included in the package:
  - dtbTool    Clone of dtbTool from Android (creates a QCDT image)
  - mkbootimg  Creates a boot.img for fastboot

.
563962a
Package: ruby-rspec-puppet-facts
Description-md5: e8faf69ae320607e2353fbe1967cc407
Description-en: Set of standard facts fixtures for Puppet rspec tests
 With this library, simplify your unit tests by looping on every supported
 Operating System and populating facts (provided by facterdb). This simplifies
 unit testing because you don't need to specify the facts yourself.
 .
 This library is very useful for writing tests with rspec-puppet when working
 on a puppet module. It also makes it very fast to setup a CI environment for
 your modules.

.
539364a
Package: r-cran-spatstat.linnet
Description-md5: 831bc121084fd9b4ab0f388368f24072
Description-en: linear networks functionality of the 'spatstat' family of GNU R
 Defines types of spatial data on a linear network and provides
 functionality for geometrical operations, data analysis and modelling
 of data on a linear network, in the 'spatstat' family of packages.
 Contains definitions and support for linear networks, including
 creation of networks, geometrical measurements, topological
 connectivity, geometrical operations such as inserting and deleting
 vertices, intersecting a network with another object, and interactive
 editing of networks. Data types defined on a network include point
 patterns, pixel images, functions, and tessellations. Exploratory
 methods include kernel estimation of intensity on a network, K-
 functions and pair correlation functions on a network, simulation
 envelopes, nearest neighbour distance and empty space distance,
 relative risk estimation with cross-validated bandwidth selection.
 Formal hypothesis tests of random pattern (chi-squared, Kolmogorov-
 Smirnov, Monte Carlo, Diggle-Cressie-Loosmore-Ford, Dao-Genton, two-
 stage Monte Carlo) and tests for covariate effects (Cox-Berman-Waller-
 Lawson, Kolmogorov-Smirnov, ANOVA) are also supported. Parametric
 models can be fitted to point pattern data using the function lppm()
 similar to glm(). Only Poisson models are implemented so far. Models
 may involve dependence on covariates and dependence on marks. Models
 are fitted by maximum likelihood. Fitted point process models can be
 simulated, automatically. Formal hypothesis tests of a fitted model are
 supported (likelihood ratio test, analysis of deviance, Monte Carlo
 tests) along with basic tools for model selection (stepwise(), AIC())
 and variable selection (sdr). Tools for validating the fitted model
 include simulation envelopes, residuals, residual plots and Q-Q plots,
 leverage and influence diagnostics, partial residuals, and added
 variable plots. Random point patterns on a network can be generated
 using a variety of models.

.
539350a
Package: r-cran-spatstat.core
Description-md5: 00fa9d56f038078f1e6c651f03e7605f
Description-en: core functionality of the 'spatstat' family of GNU R packages
 Functionality for data analysis and modelling of spatial data, mainly
 spatial point patterns, in the 'spatstat' family of packages. (Excludes
 analysis of spatial data on a linear network, which is covered by the
 separate package 'spatstat.linnet'.) Exploratory methods include quadrat
 counts, K-functions and their simulation envelopes, nearest neighbour
 distance and empty space statistics, Fry plots, pair correlation
 function, kernel smoothed intensity, relative risk estimation with cross-
 validated bandwidth selection, mark correlation functions, segregation
 indices, mark dependence diagnostics, and kernel estimates of covariate
 effects. Formal hypothesis tests of random pattern (chi-squared, Kolmogorov-
 Smirnov, Monte Carlo, Diggle-Cressie-Loosmore-Ford, Dao-Genton, two-
 stage Monte Carlo) and tests for covariate effects (Cox-Berman-Waller-
 Lawson, Kolmogorov-Smirnov, ANOVA) are also supported. Parametric models
 can be fitted to point pattern data using the functions ppm(), kppm(),
 slrm(), dppm() similar to glm(). Types of models include Poisson, Gibbs
 and Cox point processes, Neyman-Scott cluster processes, and
 determinantal point processes. Models may involve dependence on
 covariates, inter-point interaction, cluster formation and dependence on
 marks. Models are fitted by maximum likelihood, logistic regression,
 minimum contrast, and composite likelihood methods. A model can be
 fitted to a list of point patterns (replicated point pattern data) using
 the function mppm(). The model can include random effects and fixed
 effects depending on the experimental design, in addition to all the
 features listed above. Fitted point process models can be simulated,
 automatically. Formal hypothesis tests of a fitted model are supported
 (likelihood ratio test, analysis of deviance, Monte Carlo tests) along
 with basic tools for model selection (stepwise(), AIC()) and variable
 selection (sdr). Tools for validating the fitted model include
 simulation envelopes, residuals, residual plots and Q-Q plots, leverage
 and influence diagnostics, partial residuals, and added variable plots.

.
531661a
Package: r-bioc-tximportdata
Description-md5: 0ed0e25aebdd9b3d5da94d3583f3e128
Description-en: GNU R various transcript abundance quantifiers
 This package provides the output of running various
 transcript abundance quantifiers on a set of 6 RNA-seq samples
 from the GEUVADIS project. The quantifiers were Cufflinks,
 RSEM, kallisto, Salmon and Sailfish. For details on version
 numbers, sample information, and details on calls, see the
 package vignette.

.
531650a

Package: r-bioc-tximeta
Description-md5: 75f999d7edd35b8ba0d462a84ab80b38
Description-en: Transcript Quantification Import with Automatic Metadata
 Transcript quantification import from Salmon and
 alevin with automatic attachment of transcript ranges and
 release information, and other associated metadata. De novo
 transcriptomes can be linked to the appropriate sources with
 linkedTxomes and shared for computational reproducibility.
.
531572a
Package: r-bioc-structuralvariantannotation
Description-md5: da0d30e1c2fddfc05ec9f7a5a97d4001
Description-en: Variant annotations for structural variants
 StructuralVariantAnnotation contains useful helper
 functions for dealing with structural variants in VCF format.
 The packages contains functions for parsing VCFs from a number
 of popular callers as well as functions for dealing with
 breakpoints involving two separate genomic loci encoded as
 GRanges objects.

.
531487a
Package: r-bioc-scaledmatrix
Description-md5: 687e63e2193a145dccbf0115b7d15eb9
Description-en: creating a DelayedMatrix of scaled and centered values using GNU R
 Provides delayed computation of a matrix of scaled and centered values.
 The result is equivalent to using the scale() function but avoids explicit
 realization of a dense matrix during block processing. This permits greater
 efficiency in common operations, most notably matrix multiplication.

.
531365,531374c
Package: r-bioc-rgsepd
Description-md5: ba79e2df720fd833f415034334caf9f4
Description-en: GNU R gene set enrichment / projection displays
 R/GSEPD is a bioinformatics package for R to help
 disambiguate transcriptome samples (a matrix of RNA-Seq counts
 at transcript IDs) by automating differential expression (with
 DESeq2), then gene set enrichment (with GOSeq), and finally a
 N-dimensional projection to quantify in which ways each sample
 is like either treatment group.

.
531245a
Package: r-bioc-noiseq
Description-md5: 97ca31689ac281cc4a3803ec98b7392b
Description-en: Exploratory analysis and differential expression for RNA-seq data
 Analysis of RNA-seq expression data or other similar kind of data.
 Exploratory plots to evualuate saturation, count distribution,
 expression per chromosome, type of detected features, features length,
 etc. Differential expression between two experimental conditions with
 no parametric assumptions.

.
531185a
 .
 Upstream no longer supports this package. This package only still
 ships to help with rerunning/comparing/transitioning existing projects.
 For new projects please upgrade to MOFA2 (MOFA+). Actually, also when
 adding new data to old projects, MOFA2 has further improved the handling
 of multiple factors, and to compensate for a batch effect that is likely
 introduced with additional data, may be an immediate use case for that
 new version.
.
531182c
Description-md5: a64264c46be1f92fcf0f92890f21d4a5
.
531172a
Package: r-bioc-metapod
Description-md5: f75f1944531e264a8af3c2e64fed2310
Description-en: GNU R meta-analyses on P-Values of differential analyses
 Implements a variety of methods for combining p-values in differential
 analyses of genome-scale datasets. Functions can combine p-values across
 different tests in the same analysis (e.g., genomic windows in ChIP-seq,
 exons in RNA-seq) or for corresponding tests across separate analyses
 (e.g., replicated comparisons, effect of different treatment conditions).
 Support is provided for handling log-transformed input p-values, missing
 values and weighting where appropriate.

.
531075,531085d
531036,531044c
Package: r-bioc-htsfilter
Description-md5: 9c8bb9c65289353b13e58ec5aebd196d
Description-en: GNU R filter replicated high-throughput transcriptome sequencing data
 This package implements a filtering procedure for
 replicated transcriptome sequencing data based on a global
 Jaccard similarity index in order to identify genes with low,
 constant levels of expression across one or more experimental
 conditions.

.
530983a
Package: r-bioc-gseabase
Description-md5: 85e0fd5a6d06be5b79a4f0970b8f1a34
Description-en: Gene set enrichment data structures and methods
 This package provides classes and methods to support Gene
 Set Enrichment Analysis (GSEA).

Package: r-bioc-gsva
Description-md5: e85ed23c3444b7c2da17d6196437f0f4
Description-en: Gene Set Variation Analysis for microarray and RNA-seq data
 Gene Set Variation Analysis (GSVA) is a non-parametric, unsupervised
 method for estimating variation of gene set enrichment through the
 samples of a expression data set. GSVA performs a change in coordinate
 systems, transforming the data from a gene by sample matrix to a gene-
 set by sample matrix, thereby allowing the evaluation of pathway
 enrichment for each sample. This new matrix of GSVA enrichment scores
 facilitates applying standard analytical methods like functional
 enrichment, survival analysis, clustering, CNV-pathway analysis or cross-
 tissue pathway analysis, in a pathway-centric manner.

.
530864c
 Geneplotter contains plotting functions for microarrays.
 .
 The functions cPlot and cColor allow the user to
 associate microarray expression data with chromosomal location.
 The plots can include any subset (by default all chromosomes are
 shown) of chromosomes for the organism being considered.
.
530862c
Description-md5: 60f58e3cdee19f65b25a9f3928f28cab
.
530766,530774c
Package: r-bioc-dropletutils
Description-md5: 5929892eb4b63e00f4a06a3db334d42f
Description-en: BioConductor utilities for handling single-cell droplet data
 Provides a number of utility functions for handling single-cell
 (RNA-seq) data from droplet technologies such as 10X Genomics. This
 includes data loading from count matrices or molecule information files,
 identification of cells from empty droplets, removal of barcode-swapped
 pseudo-cells, and downsampling of the count matrix.

.
530724,530743c
Package: r-bioc-deseq2
Description-md5: ae9e1d3c5793b8ca7b76c769e1059db8
Description-en: R package for RNA-Seq Differential Expression Analysis
 Differential gene expression analysis based on the negative binomial
 distribution. Estimate variance-mean dependence in count data from
 high-throughput sequencing assays and test for differential expression based
 on a model using the negative binomial distribution.

Package: r-bioc-dexseq
Description-md5: 847e73dca66539e0fca1ea31c4fc3b84
Description-en: GNU R inference of differential exon usage in RNA-Seq
 The package is focused on finding differential exon usage
 using RNA-seq exon counts between samples with different
 experimental designs. It provides functions that allows the
 user to make the necessary statistical tests based on a model
 that uses the negative binomial distribution to estimate the
 variance between biological replicates and generalized linear
 models for testing. The package also provides functions for the
 visualization and exploration of the results.

.
530673,530681c
Package: r-bioc-degreport
Description-md5: 2ac0b5d6ff1f7ac8117c34f955e8e79f
Description-en: BioConductor report of DEG analysis
 Creation of a HTML report of differential expression
 analyses of count data. It integrates some of the code
 mentioned in DESeq2 and edgeR vignettes, and report a ranked
 list of genes according to the fold changes mean and
 variability for each selected gene.

.
530482a
Package: r-bioc-biocio
Description-md5: 7e02261d280b4012465fd57c56fc6f2f
Description-en: standard input and output for Bioconductor packages
 Implements `import()` and `export()` standard generics
 for importing and exporting biological data formats. `import()`
 supports whole-file as well as chunk-wise iterative import. The
 `import()` interface optionally provides a standard mechanism for
 'lazy' access via `filter()` (on row or element-like components of
 the file resource), `select()` (on column-like components of the
 file resource) and `collect()`. The `import()` interface
 optionally provides transparent access to remote (e.g. via https)
 as well as local access. Developers can register a file extension,
 e.g., `.loom` for dispatch from character-based URIs to specific
 `import()` / `export()` methods based on classes representing file
 types, e.g., `LoomFile()`.

.
530390c
 This BioConductor module provides methods for annotation for microarrays.
 .
 In its current state the basic purpose of annotate is to
 supply interface routines that support user actions that rely on the
 different meta-data packages provided through the Bioconductor
 Project.
.
530388c
Description-md5: 5776d3814905aad328f00067fa1f1b78
.
530380,530386c
Package: r-bioc-altcdfenvs
Description-md5: b70a5b497f1dbc405b3380137a754fb2
Description-en: BioConductor alternative CDF environments
 This BioConductor module provides alternative CDF environments (aka
 probeset mappings) which are Convenience data structures and functions
 to handle cdfenvs.

.
523835c
Package: libqgispython3.16.11
.
523827c
Package: libqgisgrass7-3.16.11
.
523819c
Package: libqgis-server3.16.11
.
523811c
Package: libqgis-native3.16.11
.
523803c
Package: libqgis-gui3.16.11
.
523778c
Package: libqgis-core3.16.11
.
523770c
Package: libqgis-app3.16.11
.
523762c
Package: libqgis-analysis3.16.11
.
523754c
Package: libqgis-3d3.16.11
.
515195a
Package: python3-redbaron
Description-md5: 3cfcfc588c4c4699d3e95b30254caf19
Description-en: abstraction on top of the baron FST for python
 RedBaron is a python library and tool
 powerful enough to be used in IPython
 solely with the intent
 of making the process of **writing code that modify source code**
 as easy and as simple as possible.
 That includes writing custom refactoring, generic refactoring, tools,
 IDE or directly modifying you source code in IPython
 with a higher and more powerful abstraction
 than the advanced texts modification tools that you find
 in advanced text editors and IDE.

.
512748a
Package: python3-plyer
Description-md5: e23491ee76a456253362314d2fa122f3
Description-en: platform-independent wrapper for platform-dependent APIs
 Plyer is a platform-independent api
 to use features commonly found on various platforms,
 notably mobile ones, in Python.

.
500678a
Package: python3-consul2
Description-md5: b8cc82a1a1ecdaa3479ba783fd4eb643
Description-en: Python client for Consul
 A Python client for Consul (http://www.consul.io/)

.
498432a
Package: python3-baron
Description-md5: 0d5dda97d96f5a0b3b2fd2865334ed9e
Description-en: Full Syntax Tree for python for refactoring code
 Baron is a Full Syntax Tree (FST) library for Python.
 Unlike an Abstract Syntax Tree (AST)
 which drops some syntax information in the process of its creation
 (like empty lines, comments, formatting),
 an FST keeps everything and guarantees functionally identical output.

.
496360,496386d
474922,474930c
Package: pigx-rnaseq
Description-md5: e48b7ff1eb2b189a5bedb2ce0c32035c
Description-en: pipeline for checkpointed and distributed RNA-seq analyses
 This package provides a automated workflow for the automated analysis of
 RNA-seq experiments. A series of well-accecpted tools are connected in
 Python scripts and controlled via snakemake. This supports the parallel
 execution of these workflows and provides checkpointing, such that
 interrupted workflows can take up their work again.

.
462835,462846d
462812,462815c
Description-md5: 1d42db30251e328985377b0671902f6f
Description-en: Geometry import
 Plugins for importing pixmaps, fonts and vector graphics.
.
462795,462810d
462719d
462711a
     * specctra .dsn (route result: wires and vias)
     * specctra .ses (route result: wires and vias)
.
462708d
462662c
     * PADS ASCII board
     * gEDA/PCB .pcb board (various version up to 2017)
.
462657c
     * specctra dsn board
.
462652c
     * PADS ASCII board
.
462619c
Description-md5: 284b2c150c0a8f809d3064610f950882
.
462608,462617d
453279a
Package: openstack-dashboard-debian-theme
Description-md5: 2b77980c8a74678b274f56ddc73ea748
Description-en: Debian theme for Horizon
 The OpenStack Dashboard is a web application to control an OpenStack
 cloud. It connects to OpenStack services such as Nova, Swift, or Keystone
 using the OpenStack REST API just as you would with the command line
 clients.
 .
 This package contains the OpenStack Dashboard Debian Theme, provided by the
 Debian OpenStack team, and contributed by Jean-Patrick Poizat from Infomaniak.

.
439317a
Package: nxt-firmware
Description-md5: fd2c67e0dd60909662d7c638c9efd811
Description-en: Improved firmware for LEGO Mindstorms NXT bricks
 The NXT Improved Firmware is a community-based open source project
 around the original LEGO Mindstorms firmware for the NXT
 bricks.
 .
 The firmware can be installed on the robot control bricks of type NXT.
 It is almost identical to the original firmware, meaning that
 all existing software working with the original firmware can be expected
 to work with the improved firmware as well.
 .
 The main differences between the original firmware and the improved
 firmware are the addition of absolute position regulation for motors and
 that it can be built with GCC rather than the non-free toolchain used by
 the LEGO Group.
 .
 This package contains the firmware image file, which can be flashed onto
 the brick with various tools, e.g. fwflash from the libnxt package.

.
438225,438237d
424456a
 Uses Reflect.defineProperty when available,
 otherwise Object.defineProperty, depending on supported
 javascript version.
.
424454c
Description-md5: 066a487f836c66a9e9c4f600e4495013
.
421539a
 Convert a scalar value or a single element set to an array.
 Supplying null or undefined results in an empty array.
 .
.
421538c
Description-md5: 54ec0f50470b7fa509c372ba55ee6185
.
397807,397821d
383433,383440d
375534,375539d
375518,375519d
375494,375510c
Package: linux-image-5.14.0-1-686-pae
Description-md5: 5758a6f2cc6876b569dfe768cb56b9fb
Description-en: Linux 5.14 for modern PCs (signed)
 The Linux kernel 5.14 and modules for use on PCs with one or more
.
375480,375489c
Package: linux-image-5.14.0-1-686
Description-md5: 825980a71b6f35d530efa9ac4ead3198
Description-en: Linux 5.14 for older PCs (signed)
 The Linux kernel 5.14 and modules for use on PCs with one or more
.
375462,375467d
375441,375449d
375433,375436c
Package: linux-image-5.14.0-1-cloud-arm64
Description-md5: 5753d42da932800a837ce10d67e88441
Description-en: Linux 5.14 for arm64 cloud (signed)
 The Linux kernel 5.14 and modules for use on cloud platforms supporting
.
375420,375429c
Package: linux-image-5.14.0-1-arm64
Description-md5: dcaa9de85269ad0b6c29f26a24187e14
Description-en: Linux 5.14 for 64-bit ARMv8 machines (signed)
 The Linux kernel 5.14 and modules for use on 64-bit ARMv8 machines.
.
375402,375407d
375379,375388d
375371,375374c
Package: linux-image-5.14.0-1-cloud-amd64
Description-md5: a3d9e5d30cf34e9dd4c32cb510a9b826
Description-en: Linux 5.14 for x86-64 cloud (signed)
 The Linux kernel 5.14 and modules for use on cloud platforms including
.
375357,375366c
Package: linux-image-5.14.0-1-amd64
Description-md5: d4ef3866988c1400d104ccaf94010a4f
Description-en: Linux 5.14 for 64-bit PCs (signed)
 The Linux kernel 5.14 and modules for use on PCs with AMD64, Intel 64 or
.
375210,375212c
Package: linux-support-5.14.0-1
Description-md5: 3a736ccc08e7d99be4b57df941582724
Description-en: Support files for Linux 5.14
.
375201,375204c
Package: linux-source-5.14
Description-md5: 30f7b063a3ddd7f6ff3090c08e75edf1
Description-en: Linux kernel source for version 5.14 with Debian patches
 This package provides source code for the Linux kernel version 5.14. This
.
375190c
 kernel version 5.14.
.
375186,375188c
Package: linux-perf-5.14
Description-md5: c19b8a38e136dd124cb87b17a3788414
Description-en: Performance analysis tools for Linux 5.14
.
375171c
 for Linux kernel version 5.14.
.
375167,375169c
Package: linux-kbuild-5.14
Description-md5: e92bb730ca7741cc5ab1a9d77fb5f5a6
Description-en: Kbuild infrastructure for Linux 5.14
.
375123,375154d
374933,374966c
 modules in linux-image-5.14.0-1-s390x.
.
374929,374931c
Package: linux-image-5.14.0-1-s390x
Description-md5: 17ff54bb4d92a13895f306fc71a7e6d8
Description-en: Linux 5.14 for IBM zSeries
 The Linux kernel 5.14 and modules for use on IBM zSeries.

Package: linux-image-5.14.0-1-s390x-dbg
Description-md5: bcb263e8de122ed8a3aadfee55ddeae7
Description-en: Debug symbols for linux-image-5.14.0-1-s390x
.
374919,374927c
 modules in linux-image-5.14.0-1-rpi.
.
374890,374917c
Package: linux-image-5.14.0-1-rpi-dbg
Description-md5: d795dd2f025985d13c717e080a545964
Description-en: Debug symbols for linux-image-5.14.0-1-rpi
.
374884,374887c
Package: linux-image-5.14.0-1-rpi
Description-md5: 9b7d3c9d9b05a66bca7b7a98517b322a
Description-en: Linux 5.14 for Raspberry Pi and Pi Zero
 The Linux kernel 5.14 and modules for use on Raspberry Pi, Raspberry Pi
.
374882c
 modules in linux-image-5.14.0-1-powerpc64le.
.
374873,374880c
Package: linux-image-5.14.0-1-powerpc64le
Description-md5: 8833126ac5e9817424f66f7e50635d45
Description-en: Linux 5.14 for Little-endian 64-bit PowerPC
 The Linux kernel 5.14 and modules for use on Little-endian 64-bit PowerPC.

Package: linux-image-5.14.0-1-powerpc64le-dbg
Description-md5: 9641fdfbb22b6a23a795b0645f3fcf0b
Description-en: Debug symbols for linux-image-5.14.0-1-powerpc64le
.
374871c
 modules in linux-image-5.14.0-1-octeon.
.
374862,374869c
Package: linux-image-5.14.0-1-octeon
Description-md5: 4d4ec7cf29aea97f011984d32d566494
Description-en: Linux 5.14 for Octeon
 The Linux kernel 5.14 and modules for use on Cavium Networks Octeon.

Package: linux-image-5.14.0-1-octeon-dbg
Description-md5: c055e638dc16a3703b256029b0647335
Description-en: Debug symbols for linux-image-5.14.0-1-octeon
.
374860c
 modules in linux-image-5.14.0-1-marvell.
.
374856,374858c
Package: linux-image-5.14.0-1-marvell-dbg
Description-md5: e0c89946dd611c06bbf603b90d5ac9e8
Description-en: Debug symbols for linux-image-5.14.0-1-marvell
.
374850,374853c
Package: linux-image-5.14.0-1-marvell
Description-md5: 2193936c60cd6102e82f2378610733c2
Description-en: Linux 5.14 for Marvell Kirkwood/Orion
 The Linux kernel 5.14 and modules for use on Marvell Kirkwood and Orion
.
374848c
 modules in linux-image-5.14.0-1-loongson-3.
.
374844,374846c
Package: linux-image-5.14.0-1-loongson-3-dbg
Description-md5: 5a9953a5fac7902ba471ea59336acaba
Description-en: Debug symbols for linux-image-5.14.0-1-loongson-3
.
374838,374841c
Package: linux-image-5.14.0-1-loongson-3
Description-md5: 5a9a2c2e2a061ae828bc63a0ed1fb6dc
Description-en: Linux 5.14 for Loongson 3A/3B
 The Linux kernel 5.14 and modules for use on Loongson 3A or 3B based
.
374832,374835c
Package: linux-image-5.14.0-1-cloud-arm64-unsigned
Description-md5: 420dfed9f8f00e1470c7532d44fa6ec4
Description-en: Linux 5.14 for arm64 cloud
 The Linux kernel 5.14 and modules for use on cloud platforms supporting
.
374830c
 modules in linux-image-5.14.0-1-cloud-arm64.
.
374826,374828c
Package: linux-image-5.14.0-1-cloud-arm64-dbg
Description-md5: 3fbe24572c36d51bbb45381decab540e
Description-en: Debug symbols for linux-image-5.14.0-1-cloud-arm64
.
374820,374823c
Package: linux-image-5.14.0-1-cloud-amd64-unsigned
Description-md5: ff1e02e3e111774ac8ab7d8455bd2a53
Description-en: Linux 5.14 for x86-64 cloud
 The Linux kernel 5.14 and modules for use on cloud platforms including
.
374818c
 modules in linux-image-5.14.0-1-cloud-amd64.
.
374814,374816c
Package: linux-image-5.14.0-1-cloud-amd64-dbg
Description-md5: c62528d4d1a0d53aacdd7eab95524a54
Description-en: Debug symbols for linux-image-5.14.0-1-cloud-amd64
.
374812c
 modules in linux-image-5.14.0-1-armmp-lpae.
.
374808,374810c
Package: linux-image-5.14.0-1-armmp-lpae-dbg
Description-md5: 305a1d25a47e6ea16319075edfba6992
Description-en: Debug symbols for linux-image-5.14.0-1-armmp-lpae
.
374801,374804c
Package: linux-image-5.14.0-1-armmp-lpae
Description-md5: b7f802f1a181e601917bed768f812bf7
Description-en: Linux 5.14 for ARMv7 multiplatform compatible SoCs supporting LPAE
 The Linux kernel 5.14 and modules for use on ARMv7 multiplatform kernel
.
374799c
 modules in linux-image-5.14.0-1-armmp.
.
374795,374797c
Package: linux-image-5.14.0-1-armmp-dbg
Description-md5: 64084c596377f306d91e570a61b3a8ad
Description-en: Debug symbols for linux-image-5.14.0-1-armmp
.
374783,374791c
Package: linux-image-5.14.0-1-arm64-unsigned
Description-md5: 4dad6db7ee8b7fa0fe36476202876208
Description-en: Linux 5.14 for 64-bit ARMv8 machines
 The Linux kernel 5.14 and modules for use on 64-bit ARMv8 machines.

Package: linux-image-5.14.0-1-armmp
Description-md5: 77e371dbb7a1aa8691b95199d24bb9bd
Description-en: Linux 5.14 for ARMv7 multiplatform compatible SoCs
 The Linux kernel 5.14 and modules for use on ARMv7 multiplatform kernel.
.
374781c
 modules in linux-image-5.14.0-1-arm64.
.
374777,374779c
Package: linux-image-5.14.0-1-arm64-dbg
Description-md5: e42f423d654068f261862cb9279d2a47
Description-en: Debug symbols for linux-image-5.14.0-1-arm64
.
374771,374774c
Package: linux-image-5.14.0-1-amd64-unsigned
Description-md5: c51dc1e450b70ede42845175b66fbb1f
Description-en: Linux 5.14 for 64-bit PCs
 The Linux kernel 5.14 and modules for use on PCs with AMD64, Intel 64 or
.
374769c
 modules in linux-image-5.14.0-1-amd64.
.
374765,374767c
Package: linux-image-5.14.0-1-amd64-dbg
Description-md5: 82e4e2fb63c40f0db7272e80a5abb28f
Description-en: Debug symbols for linux-image-5.14.0-1-amd64
.
374759,374762c
Package: linux-image-5.14.0-1-686-unsigned
Description-md5: a72d828acb78f53392c87d81f606a37d
Description-en: Linux 5.14 for older PCs
 The Linux kernel 5.14 and modules for use on PCs with one or more
.
374748,374751c
Package: linux-image-5.14.0-1-686-pae-unsigned
Description-md5: 58c01a5a31facbfbcfbb1eab4bdedc8b
Description-en: Linux 5.14 for modern PCs
 The Linux kernel 5.14 and modules for use on PCs with one or more
.
374746c
 modules in linux-image-5.14.0-1-686-pae.
.
374742,374744c
Package: linux-image-5.14.0-1-686-pae-dbg
Description-md5: 682f34434d20237a3d72e1fea5deae44
Description-en: Debug symbols for linux-image-5.14.0-1-686-pae
.
374740c
 modules in linux-image-5.14.0-1-686.
.
374736,374738c
Package: linux-image-5.14.0-1-686-dbg
Description-md5: b8c6a1d8d1588952761fc72a48415b1a
Description-en: Debug symbols for linux-image-5.14.0-1-686
.
374734c
 modules in linux-image-5.14.0-1-5kc-malta.
.
374725,374732c
Package: linux-image-5.14.0-1-5kc-malta
Description-md5: fe97222f1dae011ccb10021aebd5fb2b
Description-en: Linux 5.14 for MIPS Malta (64-bit)
 The Linux kernel 5.14 and modules for use on MIPS Malta boards (64-bit).

Package: linux-image-5.14.0-1-5kc-malta-dbg
Description-md5: 56864f2549b21004cdc98fead6fb2b6f
Description-en: Debug symbols for linux-image-5.14.0-1-5kc-malta
.
374723c
 modules in linux-image-5.14.0-1-4kc-malta.
.
374714,374721c
Package: linux-image-5.14.0-1-4kc-malta
Description-md5: 7dabf0e896283d1d4e3e0c4b9016df8e
Description-en: Linux 5.14 for MIPS Malta
 The Linux kernel 5.14 and modules for use on MIPS Malta boards.

Package: linux-image-5.14.0-1-4kc-malta-dbg
Description-md5: d31cffe1e432a14c82f7bf40fb77ce1d
Description-en: Debug symbols for linux-image-5.14.0-1-4kc-malta
.
374690,374695d
374630,374640c
 linux-image-5.14.0-1-s390x package.
.
374628c
 /usr/src/linux-headers-5.14.0-1-s390x, and can be used for building
.
374626c
 Linux kernel 5.14.0-1-s390x, generally used for building out-of-tree
.
374592,374624c
Package: linux-headers-5.14.0-1-s390x
Description-md5: f2cce9d3569a2f6a2a7195f276f3272f
Description-en: Header files for Linux 5.14.0-1-s390x
.
374588,374589c
 /usr/src/linux-headers-5.14.0-1-rpi, and can be used for building modules
 that load into the kernel provided by the linux-image-5.14.0-1-rpi
.
374586c
 Linux kernel 5.14.0-1-rpi, generally used for building out-of-tree kernel
.
374582,374584c
Package: linux-headers-5.14.0-1-rpi
Description-md5: 653ef8eff5cd8f4eaeac54a0953688d5
Description-en: Header files for Linux 5.14.0-1-rpi
.
374580c
 linux-image-5.14.0-1-powerpc64le package.
.
374578c
 /usr/src/linux-headers-5.14.0-1-powerpc64le, and can be used for building
.
374576c
 Linux kernel 5.14.0-1-powerpc64le, generally used for building out-of-tree
.
374572,374574c
Package: linux-headers-5.14.0-1-powerpc64le
Description-md5: 13891314e6013f674964fb75f78142dc
Description-en: Header files for Linux 5.14.0-1-powerpc64le
.
374570c
 linux-image-5.14.0-1-octeon package.
.
374568c
 /usr/src/linux-headers-5.14.0-1-octeon, and can be used for building
.
374566c
 Linux kernel 5.14.0-1-octeon, generally used for building out-of-tree
.
374562,374564c
Package: linux-headers-5.14.0-1-octeon
Description-md5: 27372f103035597d80929a2b966fb309
Description-en: Header files for Linux 5.14.0-1-octeon
.
374560c
 linux-image-5.14.0-1-marvell package.
.
374558c
 /usr/src/linux-headers-5.14.0-1-marvell, and can be used for building
.
374556c
 Linux kernel 5.14.0-1-marvell, generally used for building out-of-tree
.
374552,374554c
Package: linux-headers-5.14.0-1-marvell
Description-md5: 8bb416ca1f524af3eb2d744c921a65b9
Description-en: Header files for Linux 5.14.0-1-marvell
.
374550c
 linux-image-5.14.0-1-loongson-3 package.
.
374548c
 /usr/src/linux-headers-5.14.0-1-loongson-3, and can be used for building
.
374546c
 Linux kernel 5.14.0-1-loongson-3, generally used for building out-of-tree
.
374533,374544c
Package: linux-headers-5.14.0-1-loongson-3
Description-md5: 4912e06fd26046fb624ff45241977af0
Description-en: Header files for Linux 5.14.0-1-loongson-3
.
374530c
 linux-headers-5.14.0-1-(flavour) package, matching the flavour of the
.
374528c
 version 5.14.0-1, generally used for building out-of-tree kernel modules.
.
374524,374526c
Package: linux-headers-5.14.0-1-common
Description-md5: 74ba683743da3b008b390b78d5946eb5
Description-en: Common header files for Linux 5.14.0-1
.
374522c
 linux-image-5.14.0-1-cloud-arm64 package.
.
374520c
 /usr/src/linux-headers-5.14.0-1-cloud-arm64, and can be used for building
.
374518c
 Linux kernel 5.14.0-1-cloud-arm64, generally used for building out-of-tree
.
374514,374516c
Package: linux-headers-5.14.0-1-cloud-arm64
Description-md5: 7dee1833082a3ffd2b26d4ed2f91ea59
Description-en: Header files for Linux 5.14.0-1-cloud-arm64
.
374512c
 linux-image-5.14.0-1-cloud-amd64 package.
.
374510c
 /usr/src/linux-headers-5.14.0-1-cloud-amd64, and can be used for building
.
374508c
 Linux kernel 5.14.0-1-cloud-amd64, generally used for building out-of-tree
.
374504,374506c
Package: linux-headers-5.14.0-1-cloud-amd64
Description-md5: 7d891849388e8d22485d37de9719e98d
Description-en: Header files for Linux 5.14.0-1-cloud-amd64
.
374502c
 linux-image-5.14.0-1-armmp-lpae package.
.
374500c
 /usr/src/linux-headers-5.14.0-1-armmp-lpae, and can be used for building
.
374498c
 Linux kernel 5.14.0-1-armmp-lpae, generally used for building out-of-tree
.
374494,374496c
Package: linux-headers-5.14.0-1-armmp-lpae
Description-md5: 2c915dfb5335a4e37c49c84f533b94a2
Description-en: Header files for Linux 5.14.0-1-armmp-lpae
.
374492c
 linux-image-5.14.0-1-armmp package.
.
374490c
 /usr/src/linux-headers-5.14.0-1-armmp, and can be used for building
.
374488c
 Linux kernel 5.14.0-1-armmp, generally used for building out-of-tree
.
374484,374486c
Package: linux-headers-5.14.0-1-armmp
Description-md5: 738ced98d7544770dbf6b6e53ce7c246
Description-en: Header files for Linux 5.14.0-1-armmp
.
374482c
 linux-image-5.14.0-1-arm64 package.
.
374480c
 /usr/src/linux-headers-5.14.0-1-arm64, and can be used for building
.
374478c
 Linux kernel 5.14.0-1-arm64, generally used for building out-of-tree
.
374474,374476c
Package: linux-headers-5.14.0-1-arm64
Description-md5: ab0a8b1d5c228d65d31710a21fcc848e
Description-en: Header files for Linux 5.14.0-1-arm64
.
374472c
 linux-image-5.14.0-1-amd64 package.
.
374470c
 /usr/src/linux-headers-5.14.0-1-amd64, and can be used for building
.
374468c
 Linux kernel 5.14.0-1-amd64, generally used for building out-of-tree
.
374464,374466c
Package: linux-headers-5.14.0-1-amd64
Description-md5: 0861a01351c88e348cd165ae9cf1e195
Description-en: Header files for Linux 5.14.0-1-amd64
.
374462c
 linux-image-5.14.0-1-686-pae package.
.
374460c
 /usr/src/linux-headers-5.14.0-1-686-pae, and can be used for building
.
374458c
 Linux kernel 5.14.0-1-686-pae, generally used for building out-of-tree
.
374454,374456c
Package: linux-headers-5.14.0-1-686-pae
Description-md5: 5c5dbb655d6aa8f0b9f46342de158654
Description-en: Header files for Linux 5.14.0-1-686-pae
.
374450,374451c
 /usr/src/linux-headers-5.14.0-1-686, and can be used for building modules
 that load into the kernel provided by the linux-image-5.14.0-1-686
.
374448c
 Linux kernel 5.14.0-1-686, generally used for building out-of-tree kernel
.
374444,374446c
Package: linux-headers-5.14.0-1-686
Description-md5: ef4de43be18737159dea03bd97b3b754
Description-en: Header files for Linux 5.14.0-1-686
.
374442c
 linux-image-5.14.0-1-5kc-malta package.
.
374440c
 /usr/src/linux-headers-5.14.0-1-5kc-malta, and can be used for building
.
374438c
 Linux kernel 5.14.0-1-5kc-malta, generally used for building out-of-tree
.
374434,374436c
Package: linux-headers-5.14.0-1-5kc-malta
Description-md5: e58e8bd694f9466c2389d659debefea5
Description-en: Header files for Linux 5.14.0-1-5kc-malta
.
374432c
 linux-image-5.14.0-1-4kc-malta package.
.
374430c
 /usr/src/linux-headers-5.14.0-1-4kc-malta, and can be used for building
.
374428c
 Linux kernel 5.14.0-1-4kc-malta, generally used for building out-of-tree
.
374424,374426c
Package: linux-headers-5.14.0-1-4kc-malta
Description-md5: ec03144ab6af3ef6e4af1643be383595
Description-en: Header files for Linux 5.14.0-1-4kc-malta
.
374416c
 /usr/share/doc/linux-doc-5.14/html/index.html.
.
374413c
 the Linux kernel version 5.14.  Plenty of information, including the
.
374409,374411c
Package: linux-doc-5.14
Description-md5: cce3ab114f2e058a5d0546bef3838537
Description-en: Linux kernel specific documentation for version 5.14
.
374372,374374c
Package: linux-config-5.14
Description-md5: 9d72452ac82c57ac5b88e1a3ba6ec013
Description-en: Debian kernel configurations for Linux 5.14
.
373306,373315d
373262,373272d
373232,373243d
371814,371826d
370793,370803d
349033a
Package: librnd3
Description-md5: 7627e82a581fc208f7a45921d117cef8
Description-en: Ringdove 2D CAD library framework
 librnd is a modular framework library for 2D CAD applications. It
 provides the following built-in features:
   - hierarchic configuration files
   - flexible menu and hotkey system
   - HID API for CLI/GUI frontend
   - multi-layer rendering support
   - interactive drawing tool infrastructure
   - action infrastructure
   - polygon clipping
   - turing complete user scripting
 .
 Supported via plugins:
   - CLI/batch frontend
   - gtk2 frontend with gdk software rendering
   - gtk2 frontend with gl hardware accelerated rendering
   - lesstif/motif frontend

Package: librnd3-cloud
Description-md5: 1b1dc76a4130870349bb3f2a5dc5c69c
Description-en: Networking plugins for accessing remote resources.
 Support library plugin for 'cloud' footprint/symbol access plugin
 that integrates remote, web access resources like edakrill or
 gedasymbols.org.

Package: librnd3-dev
Description-md5: 6cde86465e50707d4ee5becbdcc6db34
Description-en: Ringdove 2D cad library, files for development.
 Headers, templates, scripts for compiling Ringdove appliactions.

Package: librnd3-doc
Description-md5: 31a6baa719dfc3291793250a38cbc7b0
Description-en: Documentation for librnd.
 Developer documentation for using librnd.

Package: librnd3-hid-gtk2-gdk
Description-md5: 65f58e7335678282bf61eaf0378578ea
Description-en: GUI: gtk2, software render
 Software rendering on gtk2, using the gdk API.

Package: librnd3-hid-gtk2-gl
Description-md5: 5794d4e95dc672886a83ca77263b170a
Description-en: GUI: gtk2, opengl
 Hardware accelerated (opengl) rendering on gtk2.

Package: librnd3-hid-lesstif
Description-md5: 0e9f185dd5b1da152683803323f1b183
Description-en: GUI: motif/lesstif, software render
 Lightweight GUI and software rendering using the motif (lesstif)
 toolkit.

Package: librnd3-lib-gl
Description-md5: ae1b13b8549fb75351fa1adb8e1ef270
Description-en: Support library for rendering with opengl.
 Provides plugins for driving an opengl output, rendering the drawing
 on opengl.

Package: librnd3-lib-gtk
Description-md5: ce186e0f6206653947906216f772a72d
Description-en: Support library for building the GUI with gtk.
 Provides the common gtk code (e.g. dialog box engine, input handling)
 for any gtk based HID plugin.

Package: librnd3-lib-gui
Description-md5: fcb7ce8f437a360c8db695a0cabc7f2d
Description-en: Support library for building the GUI.
 Provides librnd specific dialog boxes (e.g. fontsel) and top window
 GUI elements.

.
322020c
 document which contains them.  Lingua::StopWords provides such "stoplists" in
.
322015,322016c
Description-md5: 0b9890001ce0e3015ac03af6dd4ced5b
Description-en: module with stop words for several languages
.
316580a
Package: xorriso-dd-target
Description-md5: 655987ad57a2a9557c7cc9fcc655b56b
Description-en: Device evaluator and disk image copier for GNU/Linux
 xorriso-dd-target is a command-line tool to evaluate block devices
 of the Linux kernel whether they are suitable targets for a disk image
 file and to optionally copy the image file to one of them.
 It is specialized on the device names of the Linux kernel and uses the
 capabilities of util-linux program lsblk. Therefore it refuses to run
 on non-Linux kernels.
 .
 The main purpose of xorriso-dd-target is to inspect the device files of
 disk-like storage  media and to judge whether they look like removable
 devices with disposable content.
 If a single plausible candidate is detected, then the program is
 willing to copy a disk image file onto it. This will overwrite or make
 inaccessible the previous partition table and all previous data content
 of the target device.

.
304472a
Package: libffi8
Description-md5: aa11fa9e12227fc9a1de7b2cb193c270
Description-en: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

.
291101,291114d
286831,286834c
Description-md5: b79f1cdd26b995741546a516501ca29d
Description-en: set of convenient assertions easier to use than libcarp-assert-perl
 Carp::Assert::More is a convenient set of assertions intending to make
 the habit of writing assertions even easier. Compared to the
 Carp::Assert functions, this module is pure syntactic sugar, so that
 programmers have no more excuse to not use them.
.
278794c
 It has an easy to use interface and currently features thousands of
.
278791,278792c
 LeoCAD is a CAD program for creating virtual LEGO models.
.
278789c
Description-md5: fc6bb6844395b977298521eb06ca93f5
.
248372a
 fsnotifywait and fsnotifywatch are similar to inotifywait and inotifywatch,
 but they are using Linux's fanotify(7) interface by default. The fanotify API
 also provides notification and interception of filesystem events. Additional
 capabilities compared to the inotify(7) API include the ability to monitor
 all of the objects in a mounted filesystem, the ability to make access
 permission decisions, and the possibility to read or modify files before
 access by other applications.
 .
.
248364,248365c
 filesystem events. inotify-tools consists of four utilities: inotifywait,
 inotifywatch, fsnotifywait and fsnotifywatch.
.
248353c
Description-md5: e618c4a03d6d9bd64a85dac1a2e53ff3
.
242047,242085d
229701,229742d
212022,212046d
210847,210921d
210226,210250d
210126,210175d
209951,210050d
198257c
 This is a simple dependency package which depends on the serial or
 MPI build of h5py and provides test data files.
.
198237c
Description-md5: babe5999c3c9449de8bcbd876b20685d
.
198212a
Package: hdf5-plugin-lzf
Description-md5: e97187efff273df88e1d567ee845aba6
Description-en: hdf5 plugin to lzf compression library
 HDF5 (Hierarchical Data Format library, version 5) is a versatile,
 mature scientific software library designed for the fast, flexible
 storage of enormous amounts of data.
 .
 This package provides a plugin to the HDF5 LZF filter for the LZF
 compression library. Plugins are built for both serial (single
 processor) jobs (libhdf5-dev) and for multiprocessor (threaded) jobs
 (libhdf5-mpi-dev).

.
191459,191467d
190797,190854d
172097a
Package: golang-github-clusterhq-flocker-go-dev
Description-md5: 53a9ee27c07445db0be58738fe5f5401
Description-en: Flocker go library
 flocker-go implements functionality to interact with a Flocker Control
 Service.

.
165744,165756d
165711,165742d
165677,165684d
165651,165658d
165626,165638d
165572,165580d
165543,165551d
165514,165521d
165385,165395d
158422,158554d
151601,151621d
151125,151135d
98274a
Package: facterdb
Description-md5: 32811cbe313dc0a8d52c89eea976ff60
Description-en: Database of OS facts provided by Facter
 facterdb is a library and tool that contains facts from many Facter version on
 many Operating Systems. It is very useful for providing context to spec tests
 for Puppet manifests in order to simulate running tests on many different
 platforms.

.
75655a
Package: python-django-model-utils-doc
Description-md5: d7419400bbfdbb7feeddfb365eec47bd
Description-en: Django model mixins and utilities — Documentation
 Django is a high-level web application framework that loosely follows
 the model-view-controller design pattern.
 .
 The ‘django-model-utils’ library provides some mixins and utilities
 for Django:
 .
  * QueryManager: one-line definition of Managers returning a
    custom QuerySet.
  * InheritanceCastModel: more efficient use of model inheritance
  * TimeStampedModel: self-updating ‘created’ and ‘modified’ fields.
 .
 This package installs the documentation for the library.

.
36482,36492c
Package: calamares-settings-debian
Description-md5: 1a67e0bdf77e1b45aa33e4c9ae9359a6
Description-en: Debian theme and settings for the Calamares Installer
 Calamares is a generic installer framework for Linux distributions.
 By default, it contains a set of boilerplate wording and images. This
 package provides the latest Debian artwork as well as scripts that
 supports EFI installations.
 .
 It also serves as an example for how derivatives can create their own
 calamares-settings packages.

.
20715a
Package: balsa-data
Description-md5: 4510b54af8e9e11bff83135aa8aebb14
Description-en: e-mail client for GNOME -- data files
 Balsa is a highly configurable and robust mail client for the GNOME desktop.
 It supports both POP3 and IMAP servers as well as the mbox, maildir and mh
 local mailbox formats. Balsa also supports SMTP and/or the use of a local MTA
 such as Sendmail.
 .
 This package includes documentation, icons, localizations, and other
 architecture-independent data files for Balsa.

.
12071,12085c
 Ardour is providing a set of LV2 plugins:
  * a-comp.lv2
    - a compressor (mono & stereo versions)
  * a-exp.lv2
    - an expander (mono & stereo versions)
  * a-delay.lv2
    - a delay (mono version)
  * a-eq.lv2
    - an equaliser (mono version)
  * a-reverb.lv2
    - a reverberation (stereo version)
  * a-fluidsynth.lv2
    - a SF2 player (stereo version)
  * reasonablesynth.lv2
    - a reasonably good piano synth (stereo version)
.
12069c
Description-md5: 2c87f52afd9dd33809a13a428b0b1386
.
